Fiber-reinforced Composite as Oral Implant Material. Experimental studies of glass fiber and bioactive glass in vitro and in vivo

Fiber-reinforced composite as oral implant material: Experimental studies of glass fiber and bioactive glass in vitro and in vivo Department of Prosthetic Dentistry and Biomaterials Science, Institute of Dentistry, University of Turku, Turku, Finland 2008. Biocompatibility and mechanical properties are important variables that need to be determined when new materials are considered for medical implants. Special emphasis was placed on these characteristics in the present work, which aimed to investigate the potential of fiber-reinforced composite (FRC) material as an oral implant. Furthermore, the purpose of this study was to explore the effect of bioactive glass (BAG) on osseointegration of FRC implants. The biocompatibility and mechanical properties of FRC implants were studied both in vitro and in vivo. The mechanical properties of the bulk FRC implant were tested with a cantilever bending test, torsional test and push-out test. The biocompatibility was first evaluated with osteoblast cells cultured on FRC substrates. Bone bonding was determined with the mechanical push-out test and histological as well as histomorplanimetric evaluation. Implant surface was characterized with SEM and EDS analysis. The results of these studies showed that FRC implants can withstand the static load values comparably to titanium. Threaded FRC implants had significantly higher push-out strength than the threaded titanium implants. Cell culture study revealed no cytotoxic effect of FRC materials on the osteoblast-like-cells. Addition of BAG particles enhanced cell proliferation and mineralization of the FRC substrates The in vivo study showed that FRC implants can withstand static loading until failure without fracture. The results also suggest that the FRC implant is biocompatible in bone. The biological behavior of FRC was comparable to that of titanium after 4 and 12 weeks of implantation. Furthermore, addition of BAG to FRC implant increases peri-implant osteogenesis and bone maturation.

Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material

The main goal of this paper is to obtain a granular material formulated with Municipal Solid Waste Incinerarion (MSWI) bottom ash (BA) and air pollution control (APC) ash to be used as secondary building material. Previously, an optimum concrete mixture using both MSWI residues as aggregates was formulated. A compromise between the environmental behaviour and the economy of the process was considered. Unconfined compressive strength and abrasion resistance values were measured in order to evaluate the mechanical properties. From these results, the granular mixture was not suited for certain applications owing to the high BA/APC content and low cement percentages used to reduce the costs of the final product. Nevertheless, the leaching test performed showed that the concentrations of all heavy metals were below the limits established by the current Catalan legislation for their reutilization. Therefore, the material studied might be mainly used in embankments, where high mechanical properties are not needed and environmental safety is assured.

Challenges and Opportunities of Online Entertainment. Proceedings of the 7th International Conference on Internet, Law & Politics. Universitat Oberta de Catalunya, Barcelona, 9-10 July, 2012.

El VIII Congrés Internacional Internet, Dret i Política (IDP 2012) que s'ha dut a terme a Barcelona els dies 9 i 10 de juliol de 2012 sota el títol genèric de "Reptes i oportunitats de l'entreteniment en línia", ha abordat alguns dels principals reptes als que s'enfronta la societat de la informació des de la perspectiva jurídica i politològica. Concretament, els temes centrals han estat el debat sobre l'entreteniment a la xarxa, així com altres qüestions relacionades amb Internet i els drets de propietat intel·lectual, la privacitat, la seguretat o la llibertat d'expressió.

Pulmonary 64-MDCT angiography with 50 mL of iodinated contrast material in an unselected patient population: a feasible protocol

Abstract Objective: To propose a protocol for pulmonary angiography using 64-slice multidetector computed tomography (64-MDCT) with 50 mL of iodinated contrast material, in an unselected patient population, as well as to evaluate vascular enhancement and image quality. Materials and Methods: We evaluated 29 patients (22-86 years of age). The body mass index ranged from 19.0 kg/m2 to 41.8 kg/m2. Patients underwent pulmonary CT angiography in a 64-MDCT scanner, receiving 50 mL of iodinated contrast material via venous access at a rate of 4.5 mL/s. Bolus tracking was applied in the superior vena cava. Two experienced radiologists assessed image quality and vascular enhancement. Results: The mean density was 382 Hounsfield units (HU) for the pulmonary trunk; 379 and 377 HU for the right and left main pulmonary arteries, respectively; and 346 and 364 HU for the right and left inferior pulmonary arteries, respectively. In all patients, subsegmental arteries were analyzed. There were streak artifacts from contrast material in the superior vena cava in all patients. However, those artifacts did not impair the image analysis. Conclusion: Our findings suggest that pulmonary angiography using 64-MDCT with 50 mL of iodinated contrast can produce high quality images in unselected patient populations.

Online Volunteers : Knowledge Managers in Nonprofits

Peer-reviewed

Online and Offline Participation at the Local Level : A Quantitative Analysis of the Catalan Municipalities

This paper presents a first analysis on local electronic participatory experiences in Catalonia. The analysis is based on a database constructed and collected by the authors. The paper carries out an explanatory analysis of local initiatives in eparticipationand off line participation taking into account political variables (usually not considered in this kind of analysis) but also classical socio-economic variables that characterise municipalities. Hence, we add a quantitative analysis to the numerous case studies on local e-participation experiences. We have chosen Catalonia because is one of the European regions with more initiatives and one that has enjoyed considerable local governmental support to citizen participation initiatives since the 80s. The paper offers a characterisation of these experiences and a first explanatory analysis, considering: i) the institutional context in which these experiences are embedded, ii) the characteristics of the citizen participation processes and mechanisms on-line, and iii) a set of explanatory variables composed by the population size, thepolitical adscription of the mayor, the electoral abstention rate, age, income and level ofeducation in the municipality. The model that we present is explanatory for the municipalities with more than 20,000 inhabitants but it is not for the fewer than 20,000inhabitants. Actually, the number of participatory activities developed by these last municipalities is very low. Among all the variables, population size becomes the mostinfluential variable. Political variables such as political party of the mayor and the localabstention rate have a certain influence but that have to be controlled by population size.

Recognition of prior learning in online postgraduate education

The recognition of prior experiential learning (RPEL) involves the assessment ofskills and knowledge acquired by an individual through previous experience, which isnot necessarily related to an academic context. RPEL practices are far from generalisedin higher education, and there is a lack of specific guidelines on how to implement RPLprograms in particular settings, such as management education or online programs. TheRPEL pilot program developed in a Spanish virtual university is used throughout thearticle as the basis for further reflection on the design and implementation of RPEL inonline postgraduate education in the business field. The role of competences as a centraltheoretical foundation for RPEL is explained, and the context and characteristics of theRPEL program described. Special attention is paid to the key elements of the program¿sdesign and to the practical aspects of its implementation. The results of the program areassessed and general conclusions and suggestions for further research are discussed.

Exploring new criteria to design materials for online education

Peer-reviewed

Online Learning and Teaching in Higher Education, a book review

Peer-reviewed

A virtual mathematics learning environment for engineering students

Teachers of the course Introduction to Mathematics for Engineers at the UOC, an online distance-learning university, have designed,developed and tested an online studymaterial. It includes basic pre-university mathematics, indications for correct follow-up of this content and recommendations for finding appropriate support and complementarymaterials. Many different resources are used,depending on the characteristics of thecontents: Flash sequences, interactive applets, WIRIS calculators and PDF files.During the last semester, the new study material has been tested with 119 students. The academic results and student satisfaction have allowed us to outline and prioritise future lines of action.

A virtual learning environment for pregraduate mathematical students

Peer-reviewed

A Virtual Mathematics Learning Environment for Engineering Students

Teachers of the course Introduction to Mathematics for Engineers at the UOC, an online distance-learning university, have designed and produced online study material which includes basic pre-university mathematics, instructions for correct follow-up of this content and recommendations for finding appropiate support and complementary materials.

Online and Offline Participation at the Local level: A Quantitative Analysis of the Catalan Municipalities

This article presents an analysis on local participatory experiences in Catalonia,both online and in-person. The analysis is based on a database set up by theauthors. The article carries out an explanatory analysis of local participatoryinitiatives (on- and offline) taking into account political variables (not usually con-sidered in this kind of analysis) and also classical socio-economic variables thatcharacterize municipalities. Hence, we add a quantitative analysis to the numerouscase studies on local e-participation experiences. We have chosen Catalonia becauseit is one of the European regions with more initiatives and a considerable localgovernment support for citizen participation initiatives since the 1980s. Thearticle offers a characterization of these experiences and an explanatory analysis,considering: (i) the institutional context in which these experiences are embedded,(ii) the citizen participation processes and mechanisms online and (iii) a set ofexplanatory variables composed of the population size and the province to whichthe municipality belongs, the political tendency of the mayor, the electoral absten-tion rate, age, income, level of education, broadband connection and users of theInternet in the municipality. The model that we present is explanatory for munici-palities with more than 20,000 inhabitants but it is not for fewer than 20,000inhabitants. Actually, the majority of these latter municipalities have not developedany participatory activities. Among all the variables, population size is the mostinfluential variable and affects the influence of other variables, such as the politicalparty of the mayor, the local abstention rate and the province.

Determinação dos hidrocarbonetos saturados e policíclicos aromáticos presentes no material particulado da atmosfera amazônica

It was identified and quantified several organic compounds in the atmosphere of a site into Amazon Basin with high impact of biomass burning emission. It was important to know the particulate matter composition with respect to n-alkanes and PAH associated with the particulate matter because they provided indication on the main sources contributing to airborne particles, the contribution of natural vs. man-made emission and the aging of the particles. The main classes of compounds observed were n-alkanes, PAH and nitro-PAH. It was observed the formation of nitro-PAH from photochemical reactions. The aerosol mass concentration is mainly associated with fluoranthene, pyrene and benzo(ghi)perylene. Environmental and direct emissions samples (flaming and smoldering) were collected and analysed.