Private industrial project management: a systems-based case study

The technique of linear responsibility analysis is used for a retrospective case study of a private industrial development consisting of an extension to existing buildings to provide a warehouse, services block and packing line. The organizational structure adopted on the project is analysed using concepts from systems theory which are included in Walker's theoretical model of the structure of building project organizations (Walker, 1981). This model proposes that the process of building provision can be viewed as systems and subsystems which are differentiated from each other at decision points. Further to this, the subsystems can be viewed as the interaction of managing system and operating system. Using Walker's model, a systematic analysis of the relationships between the contributors gives a quantitative assessment of the efficacy of the organizational structure used. The causes of the client's dissatisfaction with the outcome of the project were lack of integration and complexity of the managing system. However, there was a high level of satisfaction with the completed project and this is reflected by the way in which the organization structure corresponded to the model's propositions.

The influence of project complexity on estimating accuracy

With the rapid development in technology over recent years, construction, in common with many areas of industry, has become increasingly complex. It would, therefore, seem to be important to develop and extend the understanding of complexity so that industry in general and in this case the construction industry can work with greater accuracy and efficiency to provide clients with a better service. This paper aims to generate a definition of complexity and a method for its measurement in order to assess its influence upon the accuracy of the quantity surveying profession in UK new build office construction. Quantitative data came from an analysis of twenty projects of varying size and value and qualitative data came from interviews with professional quantity surveyors. The findings highlight the difficulty in defining and measuring project complexity. The correlation between accuracy and complexity was not straightforward, being subjected to many extraneous variables, particularly the impact of project size. Further research is required to develop a better measure of complexity. This is in order to improve the response of quantity surveyors, so that an appropriate level of effort can be applied to individual projects, permitting greater accuracy and enabling better resource planning within the profession.

Training to address attitudes and behaviour of rural bank managers in Madhya Pradesh, India: A programme to facilitate financial inclusion

Given their physical presence in India, banks are arguably well-placed to improve financial inclusion in rural areas. However, uncertain repayment capacities and high transaction costs mean formal financial institutions are often reluctant to lend to the rural poor. Conversely, high transaction costs in dealing with banks are also incurred by clients, through, for example, lengthy, cumbersome and potentially ignominious procedures. Negative attitudes towards poor clients can be an important component of such transaction costs. An applied research project funded by the Enterprise Development Innovation Fund (EDIF-DFID) developed an innovative training programme designed to encourage more positive attitudes of bank staff towards poor clients, and towards their own role in rural poverty alleviation and development. This paper examines the development of the training programme, its implementation, and the results of its evaluation. It is shown that training can bring about attitudinal change, which in turn is reflected in behaviour and social impact.

Knowledge communication and translation- A knowledge transfer model

Purpose – The purpose of this paper is to propose a process model for knowledge transfer in using theories relating knowledge communication and knowledge translation. Design/methodology/approach – Most of what is put forward in this paper is based on a research project titled “Procurement for innovation and knowledge transfer (ProFIK)”. The project is funded by a UK government research council – The Engineering and Physical Sciences Research Council (EPSRC). The discussions are mainly grounded on a thorough review of literature accomplished as part of the research project. Findings – The process model developed in this paper has built upon the theory of knowledge transfer and the theory of communication. Knowledge transfer, per se, is not a mere transfer of knowledge. It involves different stages of knowledge transformation. Depending on the context of knowledge transfer, it can also be influenced by many factors; some positive and some negative. The developed model of knowledge transfer attempts to encapsulate all these issues in order to create a holistic framework. Originality/value of paper – An attempt has been made in the paper to combine some of the significant theories or findings relating to knowledge transfer together, making the paper an original and valuable one.

Comparative and international education: policy transfer, context sensitivity and professional development

This paper examines the intellectual and professional contribution of comparative and international studies to the field of education. It explores the nature of the challenges that are currently being faced, and assesses its potential for the advancement of future teaching, research and professional development. Attention is paid to the place of comparative and international education (CIE)-past and present-in teacher education, in postgraduate studies, and in the realms of policy and practice, theory and research. Consideration is first given to the nature and history of CIE, to its initial contributions to the field of education in the UK, and to its chief mechanisms and sites of production. Influential methodological and theoretical developments are examined, followed by an exploration of emergent questions, controversies and dilemmas that could benefit from sustained comparative analysis in the future. Conclusions consider implications for the place of CIE in the future of educational studies as a whole; for relations between and beyond the 'disciplines of education'; and for the development of sustainable research capacity in this field.

Student-teachers' perspectives on positive and negative social processes in schools

In recent years, the Standards for Qualified Teacher Status in England have placed new emphasis on student-teachers' ability to become integrated into the 'corporate life of the school' and to work with other professionals. Little research, however, has been carried out into how student-teachers perceive the social processes and interactions that are central to such integration during their initial teacher education school placements. This study aims to shed light on these perceptions. The data, gathered from 23 student-teachers through interviews and reflective writing, illustrate the extent to which the participants perceived such social processes as supporting or obstructing their development as teachers. Signals of inclusion, the degree of match or mismatch in students' and school colleagues' role expectations, and the social awareness of both school and student-teacher emerged as crucial factors in this respect. The student-teachers' accounts show their social interactions with school staff to be meaningful in developing their 'teacher self' and to be profoundly emotionally charged. The implications for mentor and student-teacher role preparation are discussed in this article.

Training to address attitudes and behaviour of rural bank managers in Madhya Pradesh, India: a programme to facilitate financial inclusion

Given their physical presence in India, banks are arguably well-placed to improve financial inclusion in rural areas. However, uncertain repayment capacities and high transaction costs mean formal financial institutions are often reluctant to lend to the rural poor. Conversely, high transaction costs in dealing with banks are also incurred by clients, through, for example, lengthy, cumbersome and potentially ignominious procedures. Negative attitudes towards poor clients can be an important component of such transaction costs. An applied research project funded by the Enterprise Development Innovation Fund (EDIF-DFID) developed an innovative training programme designed to encourage more positive attitudes of bank staff towards poor clients, and towards their own role in rural poverty alleviation and development. This paper examines the development of the training programme, its implementation, and the results of its evaluation. It is shown that training can bring about attitudinal change, which in turn is reflected in behaviour and social impact. Copyright © 2007 John Wiley & Sons, Ltd.

An efficient low power FFT implementation for multiband full-rate ultra-wideband (UWB) receivers

This paper discusses the design, implementation and synthesis of an FFT module that has been specifically optimized for use in the OFDM based Multiband UWB system, although the work is generally applicable to many other OFDM based receiver systems. Previous work has detailed the requirements for the receiver FFT module within the Multiband UWB ODFM based system and this paper draws on those requirements coupled with modern digital architecture principles and low power design criteria to converge on our optimized solution. The FFT design obtained in this paper is also applicable for implementation of the transmitter IFFT module therefore only needing one FFT module for half-duplex operation. The results from this paper enable the baseband designers of the 200Mbit/sec variant of Multiband UWB systems (and indeed other OFDM based receivers) using System-on-Chip (SoC), FPGA and ASIC technology to create cost effective and low power solutions biased toward the competitive consumer electronics market.

Soft-bit and numerical precision requirements on multiband full-rate ultra-wideband (UWB) receivers

This paper discusses the architectural design, implementation and associated simulated peformance results of a possible receiver solution fir a multiband Ultra-Wideband (UWB) receiver. The paper concentrates on the tradeoff between the soft-bit width and numerical precision requirements for the receiver versus performance. The required numerical precision results obtained in this paper can be used by baseband designers of cost effective UWB systems using Systein-on-Chip (SoC), FPGA and ASIC technology solutions biased toward the competitive consumer electronics market(1).

High signal to noise ratio THz spectroscopy with ASOPS and signal processing schemes for mapping and controlling molecular and bulk relaxation processes

Asynchronous Optical Sampling has the potential to improve signal to noise ratio in THz transient sperctrometry. The design of an inexpensive control scheme for synchronising two femtosecond pulse frequency comb generators at an offset frequency of 20 kHz is discussed. The suitability of a range of signal processing schemes adopted from the Systems Identification and Control Theory community for further processing recorded THz transients in the time and frequency domain are outlined. Finally, possibilities for femtosecond pulse shaping using genetic algorithms are mentioned.

A low clock frequency FFT core implementation for multiband full-rate ultra-wideband (UWB) receivers

This paper discusses the design, implementation and synthesis of an FFT module that has been specifically optimized for use in the OFDM based Multiband UWB system, although the work is generally applicable to many other OFDM based receiver systems. Previous work has detailed the requirements for the receiver FFT module within the Multiband UWB ODFM based system and this paper draws on those requirements coupled with modern digital architecture principles and low power design criteria to converge on our optimized solution particularly aimed at a low-clock rate implementation. The FFT design obtained in this paper is also applicable for implementation of the transmitter IFFT module therefore only needing one FFT module in the device for half-duplex operation. The results from this paper enable the baseband designers of the 200Mbit/sec variant of Multiband UWB systems (and indeed other OFDM based receivers) using System-on-Chip (SoC), FPGA and ASIC technology to create cost effective and low power consumer electronics product solutions biased toward the very competitive market.

Comparing tube models for predicting the linear rheology of branched polymer melts

The hierarchical and "bob" (or branch-on-branch) models are tube-based computational models recently developed for predicting the linear rheology of general mixtures of polydisperse branched polymers. These two models are based on a similar tube-theory framework but differ in their numerical implementation and details of relaxation mechanisms. We present a detailed overview of the similarities and differences of these models and examine the effects of these differences on the predictions of the linear viscoelastic properties of a set of representative branched polymer samples in order to give a general picture of the performance of these models. Our analysis confirms that the hierarchical and bob models quantitatively predict the linear rheology of a wide range of branched polymer melts but also indicate that there is still no unique solution to cover all types of branched polymers without case-by-case adjustment of parameters such as the dilution exponent alpha and the factor p(2) which defines the hopping distance of a branch point relative to the tube diameter. An updated version of the hierarchical model, which shows improved computational efficiency and refined relaxation mechanisms, is introduced and used in these analyses.

Television and the popular: viewing from the British perspective

The academic discipline of television studies has been constituted by the claim that television is worth studying because it is popular. Yet this claim has also entailed a need to defend the subject against the triviality that is associated with the television medium because of its very popularity. This article analyses the many attempts in the later twentieth and twenty-first centuries to constitute critical discourses about television as a popular medium. It focuses on how the theoretical currents of Television Studies emerged and changed in the UK, where a disciplinary identity for the subject was founded by borrowing from related disciplines, yet argued for the specificity of the medium as an object of criticism. Eschewing technological determinism, moral pathologization and sterile debates about television's supposed effects, UK writers such as Raymond Williams addressed television as an aspect of culture. Television theory in Britain has been part of, and also separate from, the disciplinary fields of media theory, literary theory and film theory. It has focused its attention on institutions, audio-visual texts, genres, authors and viewers according to the ways that research problems and theoretical inadequacies have emerged over time. But a consistent feature has been the problem of moving from a descriptive discourse to an analytical and evaluative one, and from studies of specific texts, moments and locations of television to larger theories. By discussing some historically significant critical work about television, the article considers how academic work has constructed relationships between the different kinds of objects of study. The article argues that a fundamental tension between descriptive and politically activist discourses has confused academic writing about ›the popular‹. Television study in Britain arose not to supply graduate professionals to the television industry, nor to perfect the instrumental techniques of allied sectors such as advertising and marketing, but to analyse and critique the medium's aesthetic forms and to evaluate its role in culture. Since television cannot be made by ›the people‹, the empowerment that discourses of television theory and analysis aimed for was focused on disseminating the tools for critique. Recent developments in factual entertainment television (in Britain and elsewhere) have greatly increased the visibility of ›the people‹ in programmes, notably in docusoaps, game shows and other participative formats. This has led to renewed debates about whether such ›popular‹ programmes appropriately represent ›the people‹ and how factual entertainment that is often despised relates to genres hitherto considered to be of high quality, such as scripted drama and socially-engaged documentary television. A further aspect of this problem of evaluation is how television globalisation has been addressed, and the example that the issue has crystallised around most is the reality TV contest Big Brother. Television theory has been largely based on studying the texts, institutions and audiences of television in the Anglophone world, and thus in specific geographical contexts. The transnational contexts of popular television have been addressed as spaces of contestation, for example between Americanisation and national or regional identities. Commentators have been ambivalent about whether the discipline's role is to celebrate or critique television, and whether to do so within a national, regional or global context. In the discourses of the television industry, ›popular television‹ is a quantitative and comparative measure, and because of the overlap between the programming with the largest audiences and the scheduling of established programme types at the times of day when the largest audiences are available, it has a strong relationship with genre. The measurement of audiences and the design of schedules are carried out in predominantly national contexts, but the article refers to programmes like Big Brother that have been broadcast transnationally, and programmes that have been extensively exported, to consider in what ways they too might be called popular. Strands of work in television studies have at different times attempted to diagnose what is at stake in the most popular programme types, such as reality TV, situation comedy and drama series. This has centred on questions of how aesthetic quality might be discriminated in television programmes, and how quality relates to popularity. The interaction of the designations ›popular‹ and ›quality‹ is exemplified in the ways that critical discourse has addressed US drama series that have been widely exported around the world, and the article shows how the two critical terms are both distinct and interrelated. In this context and in the article as a whole, the aim is not to arrive at a definitive meaning for ›the popular‹ inasmuch as it designates programmes or indeed the medium of television itself. Instead the aim is to show how, in historically and geographically contingent ways, these terms and ideas have been dynamically adopted and contested in order to address a multiple and changing object of analysis.

IT implementation in the construction organization

Organizational issues are inhibiting the implementation and strategic use of information technologies (IT) in the construction sector. This paper focuses on these issues and explores processes by which emerging technologies can be introduced into construction organizations. The paper is based on a case study, conducted in a major house building company that was implementing a virtual reality (VR) system for internal design review in the regional offices. Interviews were conducted with different members of the organization to explore the introduction process and the use of the system. The case study findings provide insight into the process of change, the constraints that inhibit IT implementation and the relationship between new technology and work patterns within construction organizations. They suggest that (1) user-developer communications are critical for the successful implementation of non-diffused innovations in the construction industry; and (2) successful uptake of IT requires both strategic decision-making by top management and decision-making by technical managers.