Multi-pollutants impact on modern cement built heritage

It is well known that the deposition of gaseous pollutants and aerosols plays a major role in causing the deterioration of monuments and built cultural heritage in European cities. Despite of many studies dedicated to the environmental damage of cultural heritage, in case of cement mortars, commonly used in the 20th century architecture, the deterioration due to air multipollutants impact, especially the formation of black crusts, is still not well explored making this issue a challenging area of research. This work centers on cement mortars – environment interactions, focusing on the diagnosis of the damage on the modern built heritage due to air multi-pollutants. For this purpose three sites, exposed to different urban areas in Europe, were selected for sampling and subsequent laboratory analyses: Centennial Hall, Wroclaw (Poland), Chiesa dell'Autostrada del Sole, Florence (Italy), Casa Galleria Vichi, Florence (Italy). The sampling sessions were performed taking into account the height from the ground level and protection from rain run off (sheltered, partly sheltered and exposed areas). The complete characterization of collected damage layer and underlying materials was performed using a range of analytical techniques: optical and scanning electron microscopy, X ray diffractometry, differential and gravimetric thermal analysis, ion chromatography, flash combustion/gas chromatographic analysis, inductively coupled plasma-optical emission spectrometer. The data were elaborated using statistical methods (i.e. principal components analyses) and enrichment factor for cement mortars was calculated for the first time. The results obtained from the experimental activity performed on the damage layers indicate that gypsum, due to the deposition of atmospheric sulphur compounds, is the main damage product at surfaces sheltered from rain run-off at Centennial Hall and Casa Galleria Vichi. By contrast, gypsum has not been identified in the samples collected at Chiesa dell'Autostrada del Sole. This is connected to the restoration works, particularly surface cleaning, regularly performed for the maintenance of the building. Moreover, the results obtained demonstrated the correlation between the location of the building and the composition of the damage layer: Centennial Hall is mainly undergoing to the impact of pollutants emitted from the close coal power stations, whilst Casa Galleria Vichi is principally affected by pollutants from vehicular exhaust in front of the building.

Frame-driven Extraction of Linked Data and Ontologies from Text

Ontology design and population -core aspects of semantic technologies- re- cently have become fields of great interest due to the increasing need of domain-specific knowledge bases that can boost the use of Semantic Web. For building such knowledge resources, the state of the art tools for ontology design require a lot of human work. Producing meaningful schemas and populating them with domain-specific data is in fact a very difficult and time-consuming task. Even more if the task consists in modelling knowledge at a web scale. The primary aim of this work is to investigate a novel and flexible method- ology for automatically learning ontology from textual data, lightening the human workload required for conceptualizing domain-specific knowledge and populating an extracted schema with real data, speeding up the whole ontology production process. Here computational linguistics plays a fundamental role, from automati- cally identifying facts from natural language and extracting frame of relations among recognized entities, to producing linked data with which extending existing knowledge bases or creating new ones. In the state of the art, automatic ontology learning systems are mainly based on plain-pipelined linguistics classifiers performing tasks such as Named Entity recognition, Entity resolution, Taxonomy and Relation extraction [11]. These approaches present some weaknesses, specially in capturing struc- tures through which the meaning of complex concepts is expressed [24]. Humans, in fact, tend to organize knowledge in well-defined patterns, which include participant entities and meaningful relations linking entities with each other. In literature, these structures have been called Semantic Frames by Fill- 6 Introduction more [20], or more recently as Knowledge Patterns [23]. Some NLP studies has recently shown the possibility of performing more accurate deep parsing with the ability of logically understanding the structure of discourse [7]. In this work, some of these technologies have been investigated and em- ployed to produce accurate ontology schemas. The long-term goal is to collect large amounts of semantically structured information from the web of crowds, through an automated process, in order to identify and investigate the cognitive patterns used by human to organize their knowledge.

In-situ Messung großer Hydrometeore mit Hilfe der In-line-Holographie

In-situ Messung großer Hydrometeore mit Hilfe derIn-line-Holographie Diese Dissertation beschreibt die Entwicklung und Erprobungeiner Apparatur zur holographischen In-situ-Messung großerHydrometeore (HODAR). Dazu wird eine dreidimensionaleMomentaufnahme eines etwa 500 dm³ großes Meßvolumen derfreien Atmosphäre mittels der In-line-Holographieaufgezeichnet. In dieser Aufnahme kann die Größe und Formeinzelner Hydrometeore, aber auch ihre Position imMeßvolumen ausgemessen werden. Daraus sind Größen- undAbstandsverteilungen der Hydrometeore zu bestimmen. MitHilfe von Doppelbelichtungen lassen sich zusätzlich auchihre Geschwindigkeiten ermitteln.Im Verlauf dieser Arbeit werden zunächst die Hydrometeorevorgestellt. Die theoretischen Möglichkeiten einer Apparaturzur In-situ-Messung werden aus den Eigenschaften desholographischen Bildes entwickelt. Anschließend wird derverwirklichte Aufbau des HODAR erläutert. Kalibrierung undTest, sowie Messungen, die die Fähigkeiten des HODAR unterBeweis stellen, werden beschrieben.

Thiete und Bisthiete in der Heterocyclensynthese

Die vorliegende Arbeit beschäftigt sich mit der Synthese arenoanellierter Naphthothiete und Benzobisthiete, sowie mit der Umsetzung der aus diesen Thieten thermisch generierbaren Valenzisomeren (Thiochinonmethide). Diese Thiochinonmethide sind hochreaktive Diensysteme, die mit zahlreichen Dienophilen (homo- und hetero-Doppel- und Dreifachbindungssysteme) nach Diels-Alder abreagieren, die dabei entstehenden S-Heterocyclen können im Sechsring noch weitere Heteroatome (N, P, O, S) enthalten. Daraus resultiert ein großes Potential der Arenothiete zur Synthese neuer Thioheterocyclen. Durch die erstmals gelungene Synthese der beiden Benzobisthiete 2H,3H-Benzo[1,2-b:4,3-b']bisthiet und 1H,4H-Benzo[2,1-b:3,4-b']bisthiet mit gewinkelter Anellierungsgeometrie hat das synthetische Spektrum der aus Arenothieten darstellbaren Thioheterocyclen nochmal eine deutliche Erweiterung erfahren.

Die Darstellung der Arenothiete erfolgt in einer mehrstufigen Synthese, in deren finalem Schritt sie mittels Blitz-Vakuum-Pyrolyse aus Arylhydroxymethylthiolen gebildet werden, dabei wird das Edukt mittels molekularer Strömung in den "Reaktor" eingebracht. Da die Arylhydroxymethylthiole in der Regel nur eine sehr geringe Flüchtigkeit haben, waren die Arenothiete meist nur in geringen Mengen darstellbar. Daher wurde in dieser Arbeit sowohl die Synthese neuer Arenothiete (gewinkelte Benzobisthiete) als auch eine Optimierung der bisherigen Synthesemethode angestrebt; diese erfolgt bevorzugt durch Variation der Pyrolyseedukte in Richtung zu potentiell höherflüchtigen Verbindungen.

Im Rahmen dieser Versuche war die Darstellung zweier Arenothiete ausgehend von cyclischen O,S-Acetalen als alternative Pyrolysevorstufen erfolgreich.

Ein besonderes Interesse speziell an Benzobisthieten begründet sich in ihrer generellen Fähigkeit zum Aufbau von bandartigen Strukturen durch Oligo- und Poly-Diels-Alder-Reaktionen. Durch die Synthese einiger Modellverbindungen konnte ihre prinzipielle Eignung zum Aufbau von Bandstrukturen auch für die beiden Benzobisthiete belegt werden.

Solving the cooling flow problem through mechanical AGN feedback

A fundamental gap in the current understanding of collapsed structures in the universe concerns the thermodynamical evolution of the ordinary, baryonic component. Unopposed radiative cooling of plasma would lead to the cooling catastrophe, a massive inflow of condensing gas toward the centre of galaxies, groups and clusters. The last generation of multiwavelength observations has radically changed our view on baryons, suggesting that the heating linked to the active galactic nucleus (AGN) may be the balancing counterpart of cooling. In this Thesis, I investigate the engine of the heating regulated by the central black hole. I argue that the mechanical feedback, based on massive subrelativistic outflows, is the key to solving the cooling flow problem, i.e. dramatically quenching the cooling rates for several billion years without destroying the cool-core structure. Using an upgraded version of the parallel 3D hydrodynamic code FLASH, I show that anisotropic AGN outflows can further reproduce fundamental observed features, such as buoyant bubbles, cocoon shocks, sonic ripples, metals dredge-up, and subsonic turbulence. The latter is an essential ingredient to drive nonlinear thermal instabilities, which cause cold gas condensation, a residual of the quenched cooling flow and, later, fuel for the AGN feedback engine. The self-regulated outflows are systematically tested on the scales of massive clusters, groups and isolated elliptical galaxies: in lighter less bound objects the feedback needs to be gentler and less efficient, in order to avoid drastic overheating. In this Thesis, I describe in depth the complex hydrodynamics, involving the coupling of the feedback energy to that of the surrounding hot medium. Finally, I present the merits and flaws of all the proposed models, with a critical eye toward observational concordance.

Development of parallelizable flood inundation models for large scale analysis

Flood disasters are a major cause of fatalities and economic losses, and several studies indicate that global flood risk is currently increasing. In order to reduce and mitigate the impact of river flood disasters, the current trend is to integrate existing structural defences with non structural measures. This calls for a wider application of advanced hydraulic models for flood hazard and risk mapping, engineering design, and flood forecasting systems. Within this framework, two different hydraulic models for large scale analysis of flood events have been developed. The two models, named CA2D and IFD-GGA, adopt an integrated approach based on the diffusive shallow water equations and a simplified finite volume scheme. The models are also designed for massive code parallelization, which has a key importance in reducing run times in large scale and high-detail applications. The two models were first applied to several numerical cases, to test the reliability and accuracy of different model versions. Then, the most effective versions were applied to different real flood events and flood scenarios. The IFD-GGA model showed serious problems that prevented further applications. On the contrary, the CA2D model proved to be fast and robust, and able to reproduce 1D and 2D flow processes in terms of water depth and velocity. In most applications the accuracy of model results was good and adequate to large scale analysis. Where complex flow processes occurred local errors were observed, due to the model approximations. However, they did not compromise the correct representation of overall flow processes. In conclusion, the CA model can be a valuable tool for the simulation of a wide range of flood event types, including lowland and flash flood events.

Pyrolysis of peptides and proteins. Analytical study and environmental applications

Analytical pyrolysis was used to investigate the formation of diketopiperazines (DKPs) which are cyclic dipeptides formed from the thermal degradation of proteins. A quali/quantitative procedure was developed combining microscale flash pyrolysis at 500 °C with gas chromatography-mass spectrometry (GC-MS) of DKPs trapped onto an adsorbent phase. Polar DKPs were silylated prior to GC-MS. Particular attention was paid to the identification of proline (Pro) containing DKPs due to their greater facility of formation. The GC-MS characteristics of more than 80 original and silylated DKPs were collected from the pyrolysis of sixteen linear dipeptides and four model proteins (e.g. bovine serum albumin, BSA). The structure of a novel DKP, cyclo(pyroglutamic-Pro) was established by NMR and ESI-MS analysis, while the structures of other novel DKPs remained tentative. DKPs resulted rather specific markers of amino acid sequence in proteins, even though the thermal degradation of DKPs should be taken into account. Structural information of DKPs gathered from the pyrolysis of model compounds was employed to the identification of these compounds in the pyrolysate of proteinaceous samples, including intrinsecally unfolded protein (IUP). Analysis of the liquid fraction (bio-oil) obtained from the pyrolysis of microalgae Nannochloropsis gaditana, Scenedesmus spp with a bench scale reactor showed that DKPs constituted an important pool of nitrogen-containing compounds. Conversely, the level of DKPs was rather low in the bio-oil of Botryococcus braunii. The developed micropyrolysis procedure was applied in combination with thermogravimetry (TGA) and infrared spectroscopy (FT-IR) to investigate surface interaction between BSA and synthetic chrysotile. The results showed that the thermal behavior of BSA (e.g. DKPs formation) was affected by the different form of doped synthetic chrysotile. The typical DKPs evolved from collagen were quantified in the pyrolysates of archaeological bones from Vicenne Necropolis in order to evaluate their conservation status in combination with TGA, FTIR and XRD analysis.

Applications of remote sensing and geographic information systems in geomorphological studies: Safaga - El Quseir area, Red Sea coast, Egypt as an example

In den letzten drei Jahrzehnten sind Fernerkundung und GIS in den Geowissenschaften zunehmend wichtiger geworden, um die konventionellen Methoden von Datensammlung und zur Herstellung von Landkarten zu verbessern. Die vorliegende Arbeit befasst sich mit der Anwendung von Fernerkundung und geographischen Informationssystemen (GIS) für geomorphologische Untersuchungen. Durch die Kombination beider Techniken ist es vor allem möglich geworden, geomorphologische Formen im Überblick und dennoch detailliert zu erfassen. Als Grundlagen werden in dieser Arbeit topographische und geologische Karten, Satellitenbilder und Klimadaten benutzt. Die Arbeit besteht aus 6 Kapiteln. Das erste Kapitel gibt einen allgemeinen Überblick über den Untersuchungsraum. Dieser umfasst folgende morphologische Einheiten, klimatischen Verhältnisse, insbesondere die Ariditätsindizes der Küsten- und Gebirgslandschaft sowie das Siedlungsmuster beschrieben. Kapitel 2 befasst sich mit der regionalen Geologie und Stratigraphie des Untersuchungsraumes. Es wird versucht, die Hauptformationen mit Hilfe von ETM-Satellitenbildern zu identifizieren. Angewandt werden hierzu folgende Methoden: Colour Band Composite, Image Rationing und die sog. überwachte Klassifikation. Kapitel 3 enthält eine Beschreibung der strukturell bedingten Oberflächenformen, um die Wechselwirkung zwischen Tektonik und geomorphologischen Prozessen aufzuklären. Es geht es um die vielfältigen Methoden, zum Beispiel das sog. Image Processing, um die im Gebirgskörper vorhandenen Lineamente einwandfrei zu deuten. Spezielle Filtermethoden werden angewandt, um die wichtigsten Lineamente zu kartieren. Kapitel 4 stellt den Versuch dar, mit Hilfe von aufbereiteten SRTM-Satellitenbildern eine automatisierte Erfassung des Gewässernetzes. Es wird ausführlich diskutiert, inwieweit bei diesen Arbeitsschritten die Qualität kleinmaßstäbiger SRTM-Satellitenbilder mit großmaßstäbigen topographischen Karten vergleichbar ist. Weiterhin werden hydrologische Parameter über eine qualitative und quantitative Analyse des Abflussregimes einzelner Wadis erfasst. Der Ursprung von Entwässerungssystemen wird auf der Basis geomorphologischer und geologischer Befunde interpretiert. Kapitel 5 befasst sich mit der Abschätzung der Gefahr episodischer Wadifluten. Die Wahrscheinlichkeit ihres jährlichen Auftretens bzw. des Auftretens starker Fluten im Abstand mehrerer Jahre wird in einer historischen Betrachtung bis 1921 zurückverfolgt. Die Bedeutung von Regentiefs, die sich über dem Roten Meer entwickeln, und die für eine Abflussbildung in Frage kommen, wird mit Hilfe der IDW-Methode (Inverse Distance Weighted) untersucht. Betrachtet werden außerdem weitere, regenbringende Wetterlagen mit Hilfe von Meteosat Infrarotbildern. Genauer betrachtet wird die Periode 1990-1997, in der kräftige, Wadifluten auslösende Regenfälle auftraten. Flutereignisse und Fluthöhe werden anhand von hydrographischen Daten (Pegelmessungen) ermittelt. Auch die Landnutzung und Siedlungsstruktur im Einzugsgebiet eines Wadis wird berücksichtigt. In Kapitel 6 geht es um die unterschiedlichen Küstenformen auf der Westseite des Roten Meeres zum Beispiel die Erosionsformen, Aufbauformen, untergetauchte Formen. Im abschließenden Teil geht es um die Stratigraphie und zeitliche Zuordnung von submarinen Terrassen auf Korallenriffen sowie den Vergleich mit anderen solcher Terrassen an der ägyptischen Rotmeerküste westlich und östlich der Sinai-Halbinsel.

Scenari incidentali generati da liquidi infiammabili: il caso di una distilleria

Questa tesi analizza gli scenari incidentali generati dallo stoccaggio di liquidi infiammabili, in particolare etanolo e metanolo, in una distilleria quale lo stabilimento Caviro Distillerie di Faenza. Sono analizzati tutti gli adempimenti normativi di un impianto soggetto a rischio di incidente rilevante, come questo di Caviro Distillerie. Vengono studiati secondo quattro metodologie diverse TNO, PHAST, ALOHA e quello di uno studio professionale i vari scenari incidentali (pool fire, dispersione tossica e flash fire), con particolare importanza anche all'effetto domino.

Radar based improvements and diagnosis of the convective capabilities of the cosmo-2 model

In the last few years the resolution of numerical weather prediction (nwp) became higher and higher with the progresses of technology and knowledge. As a consequence, a great number of initial data became fundamental for a correct initialization of the models. The potential of radar observations has long been recognized for improving the initial conditions of high-resolution nwp models, while operational application becomes more frequent. The fact that many nwp centres have recently taken into operations convection-permitting forecast models, many of which assimilate radar data, emphasizes the need for an approach to providing quality information which is needed in order to avoid that radar errors degrade the model's initial conditions and, therefore, its forecasts. Environmental risks can can be related with various causes: meteorological, seismical, hydrological/hydraulic. Flash floods have horizontal dimension of 1-20 Km and can be inserted in mesoscale gamma subscale, this scale can be modeled only with nwp model with the highest resolution as the COSMO-2 model. One of the problems of modeling extreme convective events is related with the atmospheric initial conditions, in fact the scale dimension for the assimilation of atmospheric condition in an high resolution model is about 10 Km, a value too high for a correct representation of convection initial conditions. Assimilation of radar data with his resolution of about of Km every 5 or 10 minutes can be a solution for this problem. In this contribution a pragmatic and empirical approach to deriving a radar data quality description is proposed to be used in radar data assimilation and more specifically for the latent heat nudging (lhn) scheme. Later the the nvective capabilities of the cosmo-2 model are investigated through some case studies. Finally, this work shows some preliminary experiments of coupling of a high resolution meteorological model with an Hydrological one.

Analysis of charge-transport properties in GST materials for next generation phase-change memory devices

The quest for universal memory is driving the rapid development of memories with superior all-round capabilities in non-volatility, high speed, high endurance and low power. The memory subsystem accounts for a significant cost and power budget of a computer system. Current DRAM-based main memory systems are starting to hit the power and cost limit. To resolve this issue the industry is improving existing technologies such as Flash and exploring new ones. Among those new technologies is the Phase Change Memory (PCM), which overcomes some of the shortcomings of the Flash such as durability and scalability. This alternative non-volatile memory technology, which uses resistance contrast in phase-change materials, offers more density relative to DRAM, and can help to increase main memory capacity of future systems while remaining within the cost and power constraints. Chalcogenide materials can suitably be exploited for manufacturing phase-change memory devices. Charge transport in amorphous chalcogenide-GST used for memory devices is modeled using two contributions: hopping of trapped electrons and motion of band electrons in extended states. Crystalline GST exhibits an almost Ohmic I(V) curve. In contrast amorphous GST shows a high resistance at low biases while, above a threshold voltage, a transition takes place from a highly resistive to a conductive state, characterized by a negative differential-resistance behavior. A clear and complete understanding of the threshold behavior of the amorphous phase is fundamental for exploiting such materials in the fabrication of innovative nonvolatile memories. The type of feedback that produces the snapback phenomenon is described as a filamentation in energy that is controlled by electron–electron interactions between trapped electrons and band electrons. The model thus derived is implemented within a state-of-the-art simulator. An analytical version of the model is also derived and is useful for discussing the snapback behavior and the scaling properties of the device.

Partial Discharge Phenomena in Converter and Traction Transformers: Identification and Reliability

After the development of power electronics converters, the number of transformers subjected to non-sinusoidal stresses (including DC) has increased in applications such as HVDC links and traction (electric train power cars). The effects of non-sinusoidal voltages on transformer insulation have been investigated by many researchers, but still now, there are some issues that must be understood. Some of those issues are tackled in this Thesis, studying PD phenomena behavior in Kraft paper, pressboard and mineral oil at different voltage conditions like AC, DC, AC+DC, notched AC and square waveforms. From the point of view of converter transformers, it was found that the combined effect of AC and DC voltages produces higher stresses in the pressboard that those that are present under pure DC voltages. The electrical conductivity of the dielectric systems in DC and AC+DC conditions has demonstrated to be a critical parameter, so, its measurement and analysis was also taken into account during all the experiments. Regarding notched voltages, the RMS reduction caused by notches (depending on firing and overlap angles) seems to increase the PDIV. However, the experimental results show that once PD activity has incepted, the notches increase PD repetition rate and magnitude, producing a higher degradation rate of paper. On the other hand, the reduction of mineral oil stocks, their relatively low flash point as well as environmental issues, are factors that are pushing towards the use of esters as transformer insulating fluids. This PhD Thesis also covers the study of two different esters with the scope to validate their use in traction transformers. Mineral oil was used as benchmark. The complete set of dielectric tests performed in the three fluids, show that esters behave better than mineral oil in practically all the investigated conditions, so, their application in traction transformers is possible and encouraged.

Analisi del rischio per le linee di trasferimento fluidi di una raffineria

La movimentazione delle materie prime, degli intermedi e dei prodotti finali all’interno di una raffineria avviene attraverso una struttura logistica che prevede la ricezione delle materie prime, i trasferimenti delle sostanze tra le diverse unità produttive, la spedizione dei prodotti finiti. La distribuzione dei fluidi avviene su vie di tubazioni (pipe rack e trincee) che si possono articolare su un’ampia porzione di territorio, in prossimità di impianti, strade ed altri centri nevralgici. La perdita di contenimento accidentale dalle tubazioni può costituire un elemento di rischio di difficile gestione, proprio per la diffusione dei percorsi su un’area di vaste dimensioni. Il presente lavoro di tesi, svolto presso lo studio ICARO s.r.l. di Cortona, si propone di effettuare l’analisi del rischio dovuto al trasferimento dei fluidi all’interno di una raffineria, valutando la frequenza e la distribuzione spaziale degli effetti degli scenari incidentali finali che possono avere luogo in caso di rilascio. Le tubazioni prese in esame sono quelle di maggior impatto dal punto di vista del rischio a causa della pericolosità della sostanza trasferita e della vicinanza del percorso a punti nevralgici all’interno dello stabilimento; sulla base di questo criterio sono state analizzate le tubazioni per il trasferimento di GPL, H2S e benzina. I risultati ottenuti consentono di identificare soluzioni per l’ottimizzazione del layout della raffineria e costituiscono, più in generale, uno strumento analitico di supporto alle modifiche progettuali. L’elaborato è strutturato come segue. Nel Capitolo 1 è riportata la descrizione della raffineria e delle linee di interconnessione selezionate ai fini dello studio. Nel Capitolo 2 vengono identificate le tipologie più rappresentative di perdita di contenimento dalle linee e ne viene stimata la frequenza di accadimento. Nel Capitolo 3 viene illustrata una metodologia per la stima della probabilità di innesco che tiene in considerazione la circolazione di automezzi nelle strade interne della raffineria. Nel Capitolo 4 vengono esaminati, confrontati e selezionati i vari tipi di modelli di rilascio presenti nel package di simulazione Phast Professional 7.1 in vista della loro applicazione alle perdite dalle linee. Nel Capitolo 5 è riportato il calcolo delle frequenze di accadimento degli scenari incidentali finali, mentre nel Capitolo 6 sono illustrati i risultati relativi alla valutazione delle conseguenze. Nel Capitolo 7 viene effettuato lo studio dell’effetto domino, sviluppato in accordo ad un approccio metodologico innovativo. Infine nel Capitolo 8 vengono riportate alcune considerazioni finali.

Law, Informal Institutions and Trust: an Experimental Perspective

This dissertation has studied how legal and non-legal mechanisms affect the levels of trust and trustworthiness in an economy, and whether and when subtle psychological factors are crucial for establishing trust and even for recovering trust from a breach of contract. The first Chapter has addressed the question of whether formal legal enforcement crowds out or crowds in the amount of trust in a society. We find that formal legal mechanisms, especially formal contracts backed by a powerful authority, normally undermine trust except when they are perceived as legitimate, or when there are no strong social norms of fairness (i.e. the population in a society is considerably heterogeneous), or when the environment in which repeated commercial relationships take place becomes highly uncertain. The second Chapter has examined whether the endogenous adoption of a collective punishment institution can help a society coordinate on an efficient outcome, characterized by high levels of trust and trustworthiness. The experimental results show that the endogenous introduction of collective punishment by means of a majority-voting rule does not significantly improve coordination on the efficient equilibrium. Not all subjects seem to be able to anticipate the change in behavior induced by the introduction of the mechanism, and a majority of them vote against it. The third Chapter has explored whether high-trustors adapt their behavior in response to others’ trustworthiness or untrustworthiness more quickly, which in turn supports them to maintain higher default expectations of others’ trustworthiness relative to low-trustors. Our experimental results reveal that high-trustors are better than low-trustors at predicting others’ trustworthiness because they are less susceptible to the anticipated aversive emotions aroused by the potential betrayal and thereby have a higher willingness to acquire the valuable information about their partner’s actions.

Fenomeni di interazione audio-visiva in soggetti sani e in soggetti autistici: analisi mediante rete neurale

Negli ultimi anni, studi scientifici hanno evidenziato come il nostro sistema nervoso abbia la capacità di combinare e integrare informazioni di diversa natura sensoriale. Una interazione ampiamente studiata è quella audiovisiva. Oggetto principale di questa tesi è un esempio di interazione audiovisiva, ovvero un fenomeno illusorio visivo indotto dal suono che prende il nome “sound-induced flash illusion”: quando una coppia flash+beep è preceduta o seguita - ad una distanza temporale detta Stimulus Onset Asynchorny (SOA) - da un secondo beep, i soggetti spesso riportano la percezione di aver visto due flash. Il fenomeno illusorio tende a svanire al crescere dell’SOA, e si definisce “finestra temporale d’integrazione” l’intervallo di valori di SOA all’interno del quale si verifica l’illusione. Il fenomeno illusorio è presente anche nei soggetti autistici; questi, rispetto ai soggetti sani, presentano una maggiore propensione nel riportare l’illusione e una finestra temporale d’integrazione di durata maggiore. Obiettivo di questo lavoro è stato approfondire questi fenomeni di interazione mediante l’utilizzo di un modello di rete neurale precedentemente sviluppato dal gruppo di Bioingegneria dell’Università di Bologna. Tale modello era in grado di simulare il fenomeno illusorio, ma presentava il limite di non considerare l’intera finestra temporale in cui tale fenomeno si verifica. Un’analisi di sensitività del modello ha individuato quali variazioni dei parametri potessero spiegare l’illusione in un ampio intervallo temporale e interpretare le differenze tra soggetti sani e soggetti autistici. I risultati delle simulazioni hanno evidenziato un soddisfacente accordo con i dati di letteratura. Le analisi svolte possono contribuire a chiarire i meccanismi alla base del fenomeno illusorio e della finestra temporale in cui esso ha luogo e a fare luce sulle possibili alterazioni nelle singole aree cerebrali e nella interazione tra esse che possono interpretare le differenze osservate nei soggetti autistici rispetto ai sani.