Impact of the order of cavity elements in all-normal dispersion ring fiber lasers

Nonlinearity plays a critical role in the intra-cavity dynamics of high-pulse energy fiber lasers. Management of the intra-cavity nonlinear dynamics is the key to increase the output pulse energy in such laser systems. Here, we examine the impact of the order of the intra-cavity elements on the energy of generated pulses in the all-normal dispersion mode-locked ring fiber laser cavity. In mathematical terms, the nonlinear light dynamics in resonator makes operators corresponding to the action of laser elements (active and passive fiber, out-coupler, saturable absorber) non-commuting and the order of their appearance in a cavity important. For the simple design of all-normal dispersion ring fiber laser with varying cavity length, we found the order of the cavity elements, leading to maximum output pulse energy.

Generation of dissipative solitons in an actively mode-locked ultralong fibre laser

A single-pulse actively mode-locked fibre laser with a cavity length exceeding 1 km has been developed and investigated for the first time. This all-fibre erbium-doped laser has a normal intracavity dispersion and generates dissipative 8-ns solitons with a fundamental repetition rate of 163.8 kHz; the energy per pulse reaches 34 nJ. The implemented mode locking, based on the use of intracavity intensity modulator, provides self-triggering and high stability of pulsed lasing. A possibility of continuous tuning of the centre lasing wavelength in the range of 1558 - 1560 nm without any tunable spectral selective elements in the cavity is demonstrated. The tuning occurs when controlling the modulation signal frequency due to the forced change in the pulse repetition time (group delay) under the conditions of intracavity chromatic dispersion. © 2013 Kvantovaya Elektronika and Turpion Ltd.

Liquid level sensor based on an excessively tilted fibre grating

We propose and demonstrate an optical liquid level sensor based on the surrounding medium refractive index (SRI) sensing using an excessively tilted fibre grating (ETFG). When the ETFG submerged in water, two sets of cladding modes are coupled, corresponding to air- and water-surrounded grating structures, respectively. The coupling strengths of the two sets of cladding modes evolve with the submerging length of the grating, providing a mechanism to measure the liquid level. Comparing with long-period fibre grating based liquid level sensor, the ETFG sensor has a much higher SRI responsivity for liquids with refractive index around 1.33 and a lower thermal cross sensitivity. © 2013 Published by Elsevier B.V. All rights reserved.

Deconstructing phonological tasks:the contribution of stimulus and response type to the prediction of early decoding skills

Abstract Phonological tasks are highly predictive of reading development but their complexity obscures the underlying mechanisms driving this association. There are three key components hypothesised to drive the relationship between phonological tasks and reading; (a) the linguistic nature of the stimuli, (b) the phonological complexity of the stimuli, and (c) the production of a verbal response. We isolated the contribution of the stimulus and response components separately through the creation of latent variables to represent specially designed tasks that were matched for procedure. These tasks were administered to 570 6 to 7-year-old children along with standardised tests of regular word and non-word reading. A structural equation model, where tasks were grouped according to stimulus, revealed that the linguistic nature and the phonological complexity of the stimulus predicted unique variance in decoding, over and above matched comparison tasks without these components. An alternative model, grouped according to response mode, showed that the production of a verbal response was a unique predictor of decoding beyond matched tasks without a verbal response. In summary, we found that multiple factors contributed to reading development, supporting multivariate models over those that prioritize single factors. More broadly, we demonstrate the value of combining matched task designs with latent variable modelling to deconstruct the components of complex tasks.

Self-Avoiding Walks in the Plane

Румен Руменов Данговски, Калина Христова Петрова - Разглеждаме броя на несамопресичащите се разходки с фиксирана дължина върху целочислената решетка. Завършваме анализа върху случая за лента, с дължина едно. Чрез комбинаторни аргументи получаваме точна формула за броя на разходките върху лента, ограничена отляво и отдясно. Формулата я изследваме и асимптотично.

Constructing 7-Clusters

ACM Computing Classification System (1998): G.2, G.4.

45°-TFG based in-fiber polarizer at 800nm by UV inscription

We show in-fiber polarizers at 800nm range with polarization extinction ratio (PER) up to 37dB, fabricated by UV-inscribing grating structures tilted at 45° in standard single mode fiber. The results show that the PER of such polarizers increases linearly with the grating length. © OSA 2012.

Practical and cost-effective high-fidelity optical carrier dissemination using coherent communication techniques

We report a unidirectional frequency dissemination scheme for high-fidelity optical carriers deployable over telecommunication networks. For the first time, a 10 Gb/s Binary Phase Shift Keying (BPSK) signal from an ultra-narrow linewidth laser was transmitted through a field-installed optical fibre with round-trip length of 124 km between Cork City and town of Clonakilty, without inline optical amplification. At the receiver, using coherent communication techniques and optical injection-locking the carrier was recovered with noise suppression. The beat signal between the original carrier at the transmitter and recovered carrier at the receiver shows a linewidth of 2.8 kHz. Long term stability measurements revealed fractional instabilities (True Allan deviation) of 3.3 × 10-14 for 1 s averaging time, prior to phase noise cancellation.

Exploration of a simple, low cost, micro gas turbine recuperator solution for a domestic combined heat and power unit

For micro gas turbines (MGT) of around 1 kW or less, a commercially suitable recuperator must be used to produce a thermal efficiency suitable for use in UK Domestic Combined Heat and Power (DCHP). This paper uses computational fluid dynamics (CFD) to investigate a recuperator design based on a helically coiled pipe-in-pipe heat exchanger which utilises industry standard stock materials and manufacturing techniques. A suitable mesh strategy was established by geometrically modelling separate boundary layer volumes to satisfy y + near wall conditions. A higher mesh density was then used to resolve the core flow. A coiled pipe-in-pipe recuperator solution for a 1 kW MGT DCHP unit was established within the volume envelope suitable for a domestic wall-hung boiler. Using a low MGT pressure ratio (necessitated by using a turbocharger oil cooled journal bearing platform) meant unit size was larger than anticipated. Raising MGT pressure ratio from 2.15 to 2.5 could significantly reduce recuperator volume. Dimensional reasoning confirmed the existence of optimum pipe diameter combinations for minimum pressure drop. Maximum heat exchanger effectiveness was achieved using an optimum or minimum pressure drop pipe combination with large pipe length as opposed to a large pressure drop pipe combination with shorter pipe length. © 2011 Elsevier Ltd. All rights reserved.

Comparative physical, mechanical and crystallographic properties of a series of gemfibrozil salts

Objectives Understanding the impact of the counterion on the properties of an acidic or basic drug may influence the choice of salt form, especially for less potent drugs with a high drug load per unit dose. The aim of this work was to determine the influence of the hydrogen bonding potential of the counterion on the crystal structure of salts of the poorly soluble, poorly compressible, acidic drug gemfibrozil and to correlate these with mechanical properties. Methods Compacts of the parent drug and the salts were used to determine Young's modulus of elasticity using beam bending tests. Crystal structures were determined previously from X-ray powder diffraction data. Key findings The free acid, tert-butylamine, 2-amino-2-methylpropan-1-ol and 2-amino-2-methylpropan-1, 3-diol salts had a common crystal packing motif of infinite hydrogen-bonded chains with cross-linking between pairs of adjacent chains. The tromethamine (trsi) salt, with different mechanical properties, had a two-dimensional sheet-like network of hydrogen bonds, with slip planes, forming a stiffer compact. Conclusions The type of counter ion is important in determining mechanical properties and could be selected to afford slip and plastic deformation. © 2010 Royal Pharmaceutical Society of Great Britain.

Neumann versus Leontief. Két modell – két gazdaságkép (Neumann vs Leontief. Two models, two approaches to the economy)

A szerző a tisztán elméleti célokra kifejlesztett Neumann-modellt és a gyakorlati alkalmazások céljára kifejlesztett Leontief-modellt veti össze. A Neumann-modell és a Leontief-modell éves termelési periódust feltételező, zárt, stacionárius változatának hasonló matematikai struktúrája azt a feltételezést sugallja, hogy az utóbbi a Neumann-modell sajátos eseteként értelmezhető. Az egyes modellek közgazdasági tartalmát és feltevéseit részletesen kibontva és egymással összevetve a szerző megmutatja, hogy a fenti következtetés félrevezető, két merőben különböző modellről van szó, nem lehet az egyikből a másikat levezetni. Az ikertermelés és technológiai választék lehetősége a Neumann-modell elengedhetetlen feltevése, az éves termelési periódus feltevése pedig kizárja folyam jellegű kibocsátások explicit figyelembevételét. Mindezek feltevések ugyanakkor idegenek a Leontief-modelltől. A két modell valójában egy általánosabb állomány–folyam jellegű zárt, stacionárius modell sajátos esete, méghozzá azok folyamváltozókra redukált alakja. _____ The paper compares the basic assumptions and methodology of the Von Neumann model, developed for purely abstract theoretical purposes, and those of the Leontief model, designed originally for practical applications. Study of the similar mathematical structures of the Von Neumann model and the closed, stationary Leontief model, with a unit length of production period, often leads to the false conclusion that the latter is just a simplified version of the former. It is argued that the economic assumptions of the two models are quite different, which makes such an assertion unfounded. Technical choice and joint production are indispensable features of the Von Neumann model, and the assumption of unitary length of production period excludes the possibility of taking service flows explicitly into account. All these features are completely alien to the Leontief model, however. It is shown that the two models are in fact special cases of a more general stock-flow stationary model, reduced to forms containing only flow variables.

Improving caches in consolidated environments

Memory (cache, DRAM, and disk) is in charge of providing data and instructions to a computer's processor. In order to maximize performance, the speeds of the memory and the processor should be equal. However, using memory that always match the speed of the processor is prohibitively expensive. Computer hardware designers have managed to drastically lower the cost of the system with the use of memory caches by sacrificing some performance. A cache is a small piece of fast memory that stores popular data so it can be accessed faster. Modern computers have evolved into a hierarchy of caches, where a memory level is the cache for a larger and slower memory level immediately below it. Thus, by using caches, manufacturers are able to store terabytes of data at the cost of cheapest memory while achieving speeds close to the speed of the fastest one.^ The most important decision about managing a cache is what data to store in it. Failing to make good decisions can lead to performance overheads and over-provisioning. Surprisingly, caches choose data to store based on policies that have not changed in principle for decades. However, computing paradigms have changed radically leading to two noticeably different trends. First, caches are now consolidated across hundreds to even thousands of processes. And second, caching is being employed at new levels of the storage hierarchy due to the availability of high-performance flash-based persistent media. This brings four problems. First, as the workloads sharing a cache increase, it is more likely that they contain duplicated data. Second, consolidation creates contention for caches, and if not managed carefully, it translates to wasted space and sub-optimal performance. Third, as contented caches are shared by more workloads, administrators need to carefully estimate specific per-workload requirements across the entire memory hierarchy in order to meet per-workload performance goals. And finally, current cache write policies are unable to simultaneously provide performance and consistency guarantees for the new levels of the storage hierarchy.^ We addressed these problems by modeling their impact and by proposing solutions for each of them. First, we measured and modeled the amount of duplication at the buffer cache level and contention in real production systems. Second, we created a unified model of workload cache usage under contention to be used by administrators for provisioning, or by process schedulers to decide what processes to run together. Third, we proposed methods for removing cache duplication and to eliminate wasted space because of contention for space. And finally, we proposed a technique to improve the consistency guarantees of write-back caches while preserving their performance benefits.^

Curricular perceptions of adult education at National Chun -Chin University, Chia -Yi, Taiwan

This research was conducted in Chia-Yi, Taiwan to study the needs of adult education participants to determine the factors necessary to provide direction for the development of university adult education curriculum and supportive government educational policies. Factors researched were characteristics of the adult learner, theories of adult learning, demands of adult education, and implications of university adult education as the theoretical foundation for the development of specific curriculum development efforts. The study investigated adult learning needs and their relationship with demographic variable. Analyzing the needs of adult education participant and the relative factors through a survey resulted in recommendations for the development of adult education program plans, content of curriculum, and teaching. Research questions were analyzed using descriptive statistics, frequencies, chi square, one-way analysis of variance (ANOVA), and post hoc analysis. ^ The study showed that most participants in these adult education activities were under forty, middle class, of above average educational levels, and either living or working in the city. People who were older, of lesser social and economic positions, with lower educational standards, and living/working in the country, did not participate as much in adult education opportunities. Recommendations included that in the planning or setting up of adult education activities, attention be given to all the possible barriers or problems that are likely to occur in people's participation, e.g., motivation, interests, content of courses, teaching methods, willingness of participation, qualification of teachers, time, funds, locations, and so on. It is suggested that the resolution of these problems can significantly increase the participation of adult education. ^

Size-based variation in intertissue comparisons of stable carbon and nitrogen isotopic signatures of bull sharks (Carcharhinus leucas) and tiger sharks (Galeocerdo cuvier)

Stable isotopes are important tools for understanding the trophic roles of elasmobranchs. However, whether different tissues provide consistent stable isotope values within an individual are largely unknown. To address this, the relationships among carbon and nitrogen isotope values were quantified for blood, muscle, and fin from juvenile bull sharks (Carcharhinus leucas) and blood and fin from large tiger sharks (Galeocerdo cuvier) collected in two different ecosystems. We also investigated the relationship between shark size and the magnitude of differences in isotopic values between tissues. Isotope values were significantly positively correlated for all paired tissue comparisons, but R2 values were much higher for δ13C than for δ15N. Paired differences between isotopic values of tissues were relatively small but varied significantly with shark total length, suggesting that shark size can be an important factor influencing the magnitude of differences in isotope values of different tissues. For studies of juvenile sharks, care should be taken in using slow turnover tissues like muscle and fin, because they may retain a maternal signature for an extended time. Although correlations were relatively strong, results suggest that correction factors should be generated for the desired study species and may only allow coarse-scale comparisons between studies using different tissue types.

Large-Scale Testing to Study the Effects of Critical Parameters on the Aerodynamic Behavior of Long Span Bridges

Long-span bridges are flexible and therefore are sensitive to wind induced effects. One way to improve the stability of long span bridges against flutter is to use cross-sections that involve twin side-by-side decks. However, this can amplify responses due to vortex induced oscillations. Wind tunnel testing is a well-established practice to evaluate the stability of bridges against wind loads. In order to study the response of the prototype in laboratory, dynamic similarity requirements should be satisfied. One of the parameters that is normally violated in wind tunnel testing is Reynolds number. In this dissertation, the effects of Reynolds number on the aerodynamics of a double deck bridge were evaluated by measuring fluctuating forces on a motionless sectional model of a bridge at different wind speeds representing different Reynolds regimes. Also, the efficacy of vortex mitigation devices was evaluated at different Reynolds number regimes. One other parameter that is frequently ignored in wind tunnel studies is the correct simulation of turbulence characteristics. Due to the difficulties in simulating flow with large turbulence length scale on a sectional model, wind tunnel tests are often performed in smooth flow as a conservative approach. The validity of simplifying assumptions in calculation of buffeting loads, as the direct impact of turbulence, needs to be verified for twin deck bridges. The effects of turbulence characteristics were investigated by testing sectional models of a twin deck bridge under two different turbulent flow conditions. Not only the flow properties play an important role on the aerodynamic response of the bridge, but also the geometry of the cross section shape is expected to have significant effects. In this dissertation, the effects of deck details, such as width of the gap between the twin decks, and traffic barriers on the aerodynamic characteristics of a twin deck bridge were investigated, particularly on the vortex shedding forces with the aim of clarifying how these shape details can alter the wind induced responses. Finally, a summary of the issues that are involved in designing a dynamic test rig for high Reynolds number tests is given, using the studied cross section as an example.