Synthesis and Characterization of the Europium(III) Pentakis(picrate) Complexes with Imidazolium Countercations: Structural and Photoluminescence Study

Six new lanthanide complexes of stoichiometric formula (C)(2)[Ln(Pic)(5)]-where (C) is a imidazolium cation coming from the ionic liquids 1-butyl-3-methylimidazolium picrate (BMIm-Pic), 1-butyl-3-ethylimidazolium picrate (BEIm-Pic), and 1,3-dibutylimidazolium picrate (BBIm-Pic), and Ln is Eu(III) or Gd(III) ions-have been prepared and characterized. To the best of our knowledge, these are the first cases of Ln(III) pentakis(picrate) complexes. The crystal structures of (BEIm)(2)[Eu(Pic)(5)] and (BBIm)(2)[Eu(Pic)(5)] compounds were determined by single-crystal X-ray diffraction. The [Eu(Pic)(5)](2-) polyhedra have nine oxygen atoms coordinated to the Eu(III) ion, four oxygen atoms from bidentate picrate, and one oxygen atom from monodentate picrate. The structures of the Eu complexes were also calculated using the sparkle model for lanthanide complexes, allowing an analysis of intramolecular energy transfer processes in the coordination compounds. The photoluminescence properties of the Eu(III) complexes were then studied experimentally and theoretically, leading to a rationalization of their emission quantum yields.

SET protein accumulates in HNSCC and contributes to cell survival: Antioxidant defense, Akt phosphorylation and AVOs acidification

Objectives: Determination of the SET protein levels in head and neck squamous cell carcinoma (HNSCC) tissue samples and the SET role in cell survival and response to oxidative stress in HNSCC cell lineages. Materials and Methods: SET protein was analyzed in 372 HNSCC tissue samples by immunohistochemistry using tissue microarray and HNSCC cell lineages. Oxidative stress was induced with the pro-oxidant tert-butylhydroperoxide (50 and 250 mu M) in the HNSCC HN13 cell lineage either with (siSET) or without (siNC) SET knockdown. Cell viability was evaluated by trypan blue exclusion and annexin V/propidium iodide assays. It was assessed caspase-3 and -9, PARP-1, DNA fragmentation, NM23-H1, SET, Akt and phosphorylated Akt (p-Akt) status. Acidic vesicular organelles (AVOs) were assessed by the acridine orange assay. Glutathione levels and transcripts of antioxidant genes were assayed by fluorometry and real time PCR, respectively. Results: SET levels were up-regulated in 97% tumor tissue samples and in HNSCC cell lineages. SiSET in HN13 cells (i) promoted cell death but did not induced caspases, PARP-1 cleavage or DNA fragmentation, and (ii) decreased resistance to death induced by oxidative stress, indicating SET involvement through caspase-independent mechanism. The red fluorescence induced by siSET in HN13 cells in the acridine orange assay suggests SET-dependent prevention of AVOs acidification. NM23-H1 protein was restricted to the cytoplasm of siSET/siNC HN13 cells under oxidative stress, in association with decrease of cleaved SET levels. In the presence of oxidative stress, siNC HN13 cells showed lower GSH antioxidant defense (GSH/GSSG ratio) but higher expression of the antioxidant genes PRDX6, SOD2 and TXN compared to siSET HN13 cells. Still under oxidative stress, p-Akt levels were increased in siNC HN13 cells but not in siSET HN13, indicating its involvement in HN13 cell survival. Similar results for the main SET effects were observed in HN12 and CAL 27 cell lineages, except that HN13 cells were more resistant to death. Conclusion: SET is potential (i) marker for HNSCC associated with cancer cell resistance and (ii) new target in cancer therapy. (C) 2012 Elsevier Ltd. All rights reserved.

An electrochemical gas sensor based on paper supported room temperature ionic liquids

A sensitive and fast-responding membrane-free amperometric gas sensor is described, consisting of a small filter paper foil soaked with a room temperature ionic liquid (RTIL), upon which three electrodes are screen printed with carbon ink, using a suitable mask. It takes advantage of the high electrical conductivity and negligible vapour pressure of RTILs as well as their easy immobilization into a porous and inexpensive supporting material such as paper. Moreover, thanks to a careful control of the preparation procedure, a very close contact between the RTIL and electrode material can be achieved so as to allow gaseous analytes to undergo charge transfer just as soon as they reach the three-phase sites where the electrode material, paper supported RTIL and gas phase meet. Thus, the adverse effect on recorded currents of slow steps such as analyte diffusion and dissolution in a solvent is avoided. To evaluate the performance of this device, it was used as a wall-jet amperometric detector for flow injection analysis of 1-butanethiol vapours, adopted as the model gaseous analyte, present in headspace samples in equilibrium with aqueous solutions at controlled concentrations. With this purpose, the RTIL soaked paper electrochemical detector (RTIL-PED) was assembled by using 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide as the wicking RTIL and printing the working electrode with carbon ink doped with cobalt(II) phthalocyanine, to profit from its ability to electrocatalyze thiol oxidation. The results obtained were quite satisfactory (detection limit: 0.5 mu M; dynamic range: 2-200 mu M, both referring to solution concentrations; correlation coefficient: 0.998; repeatability: +/- 7% RSD; long-term stability: 9%), thus suggesting the possible use of this device for manifold applications.

Biochemical, physicochemical and molecular characterization of a genuine 2-Cys-peroxiredoxin purified from cowpea [Vigna unguiculata (L.) Walpers] leaves

Background: Peroxiredoxins have diverse functions in cellular defense-signaling pathways. 2-Cys-peroxiredoxins (2-Cys-Prx) reduce H2O2 and alkyl-hydroperoxide. This study describes the purification and characterization of a genuine 2-Cys-Prx from Vigna unguiculata (Vu-2-Cys-Prx). Methods: Vu-2-Cys-Prx was purified from leaves by ammonium sulfate fractionation, chitin affinity and ion exchange chromatography. Results: Vu-2-Cys-Prx reduces H2O2 using NADPH and DTT. Vu-2-Cys-Prx is a 44 kDa (SDS-PAGE)/46 kDa (exclusion chromatography) protein that appears as a 22 kDa molecule under reducing conditions, indicating that it is a homodimer linked intermolecularly by disulfide bonds and has a pI range of 4.56-4.72; its NH2-terminal sequence was similar to 2-Cys-Prx from Phaseolus vulgaris (96%) and Populus tricocarpa (96%). Analysis by ESI-Q-TOF MS/MS showed a molecular mass/pI of 28.622 kDa/5.18. Vu-2-Cys-Prx has 8% alpha-helix, 39% beta-sheet, 22% of turns and 31% of unordered forms. Vu-2-Cys-Prx was heat stable, has optimal activity at pH 7.0, and prevented plasmid DNA degradation. Atomic force microscopy shows that Vu-2-Cys-Prx oligomerized in decamers which might be associated with its molecular chaperone activity that prevented denaturation of insulin and citrate synthase. Its cDNA analysis showed that the redox-active Cys(52) residue and the amino acids Pro(45), Thr(49) and Arg(128) are conserved as in other 2-Cys-Prx. General significance: The biochemical and molecular features of Vu-2-Cys-Prx are similar to other members of 2-Cys-Prx family. To date, only one publication reported on the purification of native 2-Cys-Prx from leaves and the subsequent analysis by N-terminal Edman sequencing, which is crucial for construction of stromal recombinant 2-Cys-Prx proteins. (C) 2012 Elsevier B.V. All rights reserved.

Structure and peroxidase activity of ferric Streptomyces clavuligerus orf10-encoded protein P450CLA: UV-visible, CD, MCD and EPR spectroscopic characterization

The present study reports the spectroscopic characterization by UV-visible absorption spectroscopy, magnetic circular dichroism (MCD) and electron paramagnetic resonance (EPR) of the recombinant orf10-encoded P450-camphor like protein (P450CLA)of Streptomyces clavuligerus expressed in Escherichia coli Rosetta in the native form and associated to external ligands containing the β-lactam, oxazole and alkylamine-derived (alcohol) moieties of the clavulamic acid. Considering the diversity of potential applications for the enzyme, the reactivity with tert-butylhydroperoxide (tert-BuOOH) was also characterized. P450CLA presents a covalently bound heme group and exhibited the UV-visible, CD and MCD spectral features of P450CAM including the fingerprint Soret band at 450 nm generated by the ferrous CO-complex. P450CLA was converted to high valence species by tert-BuOOH and promoted homolytic scission of the O-O bond. The radical profile of the reaction was tert-butyloxyl as primary and methyl and butylperoxyl as secondary radicals. The secondary methyl and butylperoxyl radicals resulted respectively from the β-scission of the alkoxyl radical and from the reaction of methyl radical with molecular oxygen.

Properties of a new poly-ether-glycol copolymer.

Triblock copolymers are made of monomer segments, being the central part usually hydrophobic and the outer parts hydrophilic. By varying sizes, molecular weights and monomer types of the segments one obtains different final molecules, with different physico-chemical properties, which are directly related to the performance of the final product. Looking for new products to be used, among other possibilities, in biological applications, a new polymer (Figure 1) was synthesized by the Dow Chemical and studied by Size Exclusion Chromatography, Fourier Transformed Infrared Spectrometry, Small-angle X-ray Scattering (SAXS) and its cloud point was determined by measuring light transmittance. The studies showed low molecular polydispersivety, but different polarities in the macromolecules fractions. Due to the low solubility of Diol in water, a mixture of water/butyl diglycol was used as solvent. An extensive analysis by SAXS was performed for concentrations from 50 wt% to 80 wt% of Diol in solution. Small concentrations showed very low signal to noise ratio, making it impossible to be analysed. The scattering intensity including the form factor of polydisperse non-homogeneous spheres, and the structure factor of interacting hard spheres was fitted to the curves. As the polymer concentration is high, the fitting of form factors of direct and reverse micelles were compared. The results for direct micelles were better up to 80 wt%, whereas at 90 wt% and 95 wt% the curves were better fitted by reverse micelles. It might seem odd that direct micelles are present up to such high concentrations, but it might have been caused by the presence of butyl diglycol, which increases the solubility of Diol in water. The inner and outer radius of the micelles, electron density distribution, and interaction radius of the micelles were obtained. The polydispersivety increases with Diol concentration. Besides, the interaction radius increases with solvent concentration, even when reversed micelles are present. In the last case, accompanied by an increase of inner radius (water content), as there are fewer Diol molecules to involve the water nuclei, which become larger, further apart, and in less number.

Optically active photoresponsive multifunctional polymeric materials

In the last year [1], Angiolini and co-workers have synthesized and investigated methacrylic polymers bearing in the side chain the chiral cyclic (S)-3-hydroxypyrrolidine moiety interposed between the main chain and the trans-azoaromatic chromophore, substituted or not in the 4’ position by an electron-withdrawing group. In these materials, the presence of a rigid chiral moiety of one prevailing absolute configuration favours the establishment of a chiral conformation of one prevailing helical handedness, at least within chain segments of the macromolecules, which can be observed by circular dichroism (CD). The simultaneous presence of the azoaromatic and chiral functionalities allows the polymers to display both the properties typical of dissymmetric systems (optical activity, exciton splitting of dichroic absorptions), as well as the features typical of photochromic materials (photorefractivity, photoresponsiveness, NLO properties). The first part of this research was to synthesize analogue homopolymers and copolymers based on bisazoaromatic moiety and compare their properties to those of the above mentioned analogue derivatives bearing only one azoaromatic chromophore in the side chain. We focused also the attention on the effects induced on the thermal and chiroptical behaviours by the insertion of particulars achiral comonomers characterized by different side-chain mobility and grown hindrance (MMA, tert-BMA and TrMA). On the other hand carbazole containing polymers [2] have attracted much attention because of their unique features. The use of these materials in advanced micro- and nanotechnologies spreads in many different applications such as photoconductive and photorefractive polymers, electroluminescent devices, programmable optical interconnections, data storage, chemical photoreceptors, NLO, surface relief gratings, blue emitting materials and holographic memory. The second part of the work was focused on the synthesis and the characterization polymeric derivatives bearing in the side chain carbazole or phenylcarbazole moieties linked to the (S)- 2-hydroxy succinimide or the (S)-3-hydroxy pyrrolidinyl ring as chiral groups covalently linked to the main chain through ester bonds. The last objective of this research was to design, synthesize, and characterize multifunctional methacrylic homopolymers and copolymers bearing three distinct functional groups (i.e. azoaromatic, carbazole and chiral group of one single configuration) directly linked in the side chain. This polymeric derivatives could be of potential interest for several advanced application fields, such as optical storage, waveguides, chiroptical switches, chemical photoreceptors, NLO, surface relief gratings, photoconductive materials, etc.

Experimentation and thermodynamic representations of binaries containing compounds of low boiling points: pentane and alkyl methanoates

[EN]This work presents experimental mixing properties, hEand vE, at several temperatures and the iso-baric vapor–liquid equilibria (iso-p VLE) at 101.32 kPa for four binaries containing pentane and four alkyl(methyl to butyl) methanoates. Particular conditions are established to work with these solutions withhighly volatile compounds, especially for the case of methyl methanoate + pentane system, for whicha continuous feeding device is designed and constructed for measuring the densities.

Description of the behavior of dichloroalkanes-containing solutions with three [bXmpy][4] isomer, using the experimental information of thermodynamic properties, 1H-NMR spectral and the COSMO-RS methodology

[EN]This work studies the binaries of 1-butyl-X-methylpyridinium tetrafluoroborate [bXmpy][BF4] (X = 2, 3, and 4) with four 1,ω-dichloroalkanes, ω = 1−4, using the results obtained for the mixing properties hE and v E at two temperatures. The three isomers of the ionic liquid (IL) are weakly miscible with the 1,ω-dichloroalkanes when ω ≥ 5 and moderately soluble for ω = 4. The vE s of all the binaries present contractive effects, v E < 0, which are more pronounced with increasing temperature; the variation in vE with ω is positive, although this changes after ω = 4 due to problems of immiscibility

Mitochondrial dysfunction in a cell model of thyroid oncocytoma

The role of mitochondrial dysfunction in cancer has long been a subject of great interest. In this study, such dysfunction has been examined with regards to thyroid oncocytoma, a rare form of cancer, accounting for less than 5% of all thyroid cancers. A peculiar characteristic of thyroid oncocytic cells is the presence of an abnormally large number of mitochondria in the cytoplasm. Such mitochondrial hyperplasia has also been observed in cells derived from patients suffering from mitochondrial encephalomyopathies, where mutations in the mitochondrial DNA(mtDNA) encoding the respiratory complexes result in oxidative phosphorylation dysfunction. An increase in the number of mitochondria occurs in the latter in order to compensate for the respiratory deficiency. This fact spurred the investigation into the presence of analogous mutations in thyroid oncocytic cells. In this study, the only available cell model of thyroid oncocytoma was utilised, the XTC-1 cell line, established from an oncocytic thyroid metastasis to the breast. In order to assess the energetic efficiency of these cells, they were incubated in a medium lacking glucose and supplemented instead with galactose. When subjected to such conditions, glycolysis is effectively inhibited and the cells are forced to use the mitochondria for energy production. Cell viability experiments revealed that XTC-1 cells were unable to survive in galactose medium. This was in marked contrast to the TPC-1 control cell line, a thyroid tumour cell line which does not display the oncocytic phenotype. In agreement with these findings, subsequent experiments assessing the levels of cellular ATP over incubation time in galactose medium, showed a drastic and continual decrease in ATP levels only in the XTC-1 cell line. Furthermore, experiments on digitonin-permeabilised cells revealed that the respiratory dysfunction in the latter was due to a defect in complex I of the respiratory chain. Subsequent experiments using cybrids demonstrated that this defect could be attributed to the mitochondrially-encoded subunits of complex I as opposed to the nuclearencoded subunits. Confirmation came with mtDNA sequencing, which detected the presence of a novel mutation in the ND1 subunit of complex I. In addition, a mutation in the cytochrome b subunit of complex III of the respiratory chain was detected. The fact that XTC-1 cells are unable to survive when incubated in galactose medium is consistent with the fact that many cancers are largely dependent on glycolysis for energy production. Indeed, numerous studies have shown that glycolytic inhibitors are able to induce apoptosis in various cancer cell lines. Subsequent experiments were therefore performed in order to identify the mode of XTC-1 cell death when subjected to the metabolic stress imposed by the forced use of the mitochondria for energy production. Cell shrinkage and mitochondrial fragmentation were observed in the dying cells, which would indicate an apoptotic type of cell death. Analysis of additional parameters however revealed a lack of both DNA fragmentation and caspase activation, thus excluding a classical apoptotic type of cell death. Interestingly, cleavage of the actin component of the cytoskeleton was observed, implicating the action of proteases in this mode of cell demise. However, experiments employing protease inhibitors failed to identify the specific protease involved. It has been reported in the literature that overexpression of Bcl-2 is able to rescue cells presenting a respiratory deficiency. As the XTC-1 cell line is not only respiration-deficient but also exhibits a marked decrease in Bcl-2 expression, it is a perfect model with which to study the relationship between Bcl-2 and oxidative phosphorylation in respiratory-deficient cells. Contrary to the reported literature studies on various cell lines harbouring defects in the respiratory chain, Bcl-2 overexpression was not shown to increase cell survival or rescue the energetic dysfunction in XTC-1 cells. Interestingly however, it had a noticeable impact on cell adhesion and morphology. Whereas XTC-1 cells shrank and detached from the growth surface under conditions of metabolic stress, Bcl-2-overexpressing XTC-1 cells appeared much healthier and were up to 45% more adherent. The target of Bcl-2 in this setting appeared to be the actin cytoskeleton, as the cleavage observed in XTC-1 cells expressing only endogenous levels of Bcl-2, was inhibited in Bcl-2-overexpressing cells. Thus, although unable to rescue XTC-1 cells in terms of cell viability, Bcl-2 is somehow able to stabilise the cytoskeleton, resulting in modifications in cell morphology and adhesion. The mitochondrial respiratory deficiency observed in cancer cells is thought not only to cause an increased dependency on glycolysis but it is also thought to blunt cellular responses to anticancer agents. The effects of several therapeutic agents were thus assessed for their death-inducing ability in XTC-1 cells. Cell viability experiments clearly showed that the cells were more resistant to stimuli which generate reactive oxygen species (tert-butylhydroperoxide) and to mitochondrial calcium-mediated apoptotic stimuli (C6-ceramide), as opposed to stimuli inflicting DNA damage (cisplatin) and damage to protein kinases(staurosporine). Various studies in the literature have reported that the peroxisome proliferator-activated receptor-coactivator 1(PGC-1α), which plays a fundamental role in mitochondrial biogenesis, is also involved in protecting cells against apoptosis caused by the former two types of stimuli. In accordance with these observations, real-time PCR experiments showed that XTC-1 cells express higher mRNA levels of this coactivator than do the control cells, implicating its importance in drug resistance. In conclusion, this study has revealed that XTC-1 cells, like many cancer cell lines, are characterised by a reduced energetic efficiency due to mitochondrial dysfunction. Said dysfunction has been attributed to mutations in respiratory genes encoded by the mitochondrial genome. Although the mechanism of cell demise in conditions of metabolic stress is unclear, the potential of targeting thyroid oncocytic cancers using glycolytic inhibitors has been illustrated. In addition, the discovery of mtDNA mutations in XTC-1 cells has enabled the use of this cell line as a model with which to study the relationship between Bcl-2 overexpression and oxidative phosphorylation in cells harbouring mtDNA mutations and also to investigate the significance of such mutations in establishing resistance to apoptotic stimuli.

Einfluß endogener und exogener Faktoren auf Bildung und Reparatur oxidativer DNA-Schäden

Für die Krebsentstehung sind nach heutigen Vorstellungen Mutationen in bestimmten Genen somatischer Zellen verantwortlich, die ihrerseits durch chemische Modifikationen der DNA (DNA-Schäden) verursacht werden. Von besonderem Interesse als DNA-schädigende Agentien sind reaktive Sauerstoffspezies (ROS), die endogen - wie z.B. in der Lipidperoxidation oder mitochondrialen Atmungskette - oder exogen - z.B. durch Arzneimittel oder andere aus der Umwelt stammende Chemikalien - gebildet werden können. Dem Schutz der DNA vor dieser Schädigung und ihren Folgen dienen antioxidative Systeme und DNA-Reparatur, deren Effizienz von verschiedenen Genen der Zelle abhängig ist. Ziel dieser Arbeit war die Untersuchung des Einflusses bestimmter Faktoren auf die Bildung, Inhibierung (antioxidative Wirkung) und Reparatur oxidativer DNA-Schäden. Als Beispiel für exogene Stoffe, die zur Bildung oxidativer DNA-Schäden führen, wurden die Gyrasehemmer Ofloxacin und Norfloxacin nach Bestrahlung mit UV-360 untersucht. Unter Verwendung spezifischer DNA-Reparatur-endonukleasen als Sonden (Fpg-Protein, Endonuklease III, Endonuklease IV, Exonuklease III, T4 Endonuklease V) wurden spezifisch DNA-Modifikationen an zellfreier und zellulärer DNA quantifiziert. Es zeigte sich, daß es sich im Falle des Ofloxacins bei der ultimal mit der DNA reagierenden reaktiven Spezies um Hydroxylradikale handelt, während durch Norfloxacin Singulettsauerstoff entsteht. Durch Zusatz verschiedener Antioxidantien konnten diese Ergebnisse bestätigt werden. Im Gegensatz zu Hydroxylradikalen ist über die DNA-Schäden und Mutationen durch Alkoxyl-Radikale, die endogen bei der Lipidperoxidation entstehen, nichts bekannt. Die Substanz BCBT ([4-[(tert-Butyldioxy)carbonyl]benzyl]-triethyl-ammonium-chlorid) generiert Alkoxyl-Radikale. BCBT + UV-360 induzierte vorwiegend Fpg-sensitive Modifikationen, die durch Bestimmung mittels HPLC/ECD zu 83 ± 18% als 8-Hydroxyguanin identifiziert wurden. Der Vergleich des Einflusses der Zusätze tert-Butanol und Natriumazid auf die Schädigung mit BCBT mit anderen reaktiven Spezies zeigte klar, daß die Schädigung hier über Alkoxyl-Radikale verläuft. Die Analyse und Sequenzierung der durch BCBT induzierten Mutanten zeigte, daß vorwiegend GC->TA Transversionen gebildet werden, die auf 8-oxoG zurückzuführen sind. Auf der Ebene der Antioxidantien wurde der Einfluß des zelleigenen Glutathions untersucht. Mit der Depletion des Glutathion-Gehalts durch Vorbehandlung mit L-Buthionin-SR-sulfoximin (BSO) ging eine Erhöhung des Steady-State-Spiegels in den untersuchten AS52 Zellen einher. Selen ist ein wichtiges Spurenelement und u.a. Bestandteil von Glutathionperoxidasen (GPx). Um die Bedeutung von Selen bei der oxidativer DNA-Modifikationen bzw. deren Inhibierung zu untersuchen, wurden Natriumselenit und Ebselen eingesetzt. Ab einer Konzentration von 50 µM trat durch Natriumselenit eine Erhöhung des Steady-State-Spiegels auf (prooxidativer Effekt). Parallel mit der oxidativen Schädigung der DNA ist eine Erhöhung des zellulären Gehalts an Glutathion feststellbar. Ebselen bedingte in Konzentrationen bis 200 µM keine Erhöhung des Steady-State-Spiegels oder des Gehalts an reduziertem Glutathion. Beide Substanzen waren in der Lage, die durch sichtbares Licht und UV-B-Strahlung induzierten Einzelstrangbrüche zu reduzieren. Mikrokerne, die durch Schädigung mit den Agentien Kaliumbromat, Ro 19-8022 + Licht und Wasserstoffperoxid entstanden, waren ebenso durch Natriumselenit und Ebselen reduzierbar. In dieser Arbeit konnte ferner gezeigt werden, daß p53 keinen Einfluß auf die Reparatur UV-induzierter Modifikationen (Nukleotidexzisionsreparatur) und die Reparatur Fpg-sensitiver Modifikationen (Basenexzisionsreparatur) hat.

Synthesis and characterization of polymers containing oligothiophenes

In the present work a series of thiophene oligomers of three and six thiophene units were synthesized, starting from thiophene, and characterized. Polymers containing these electroative side groups were then prepared by two strategies. The oligomers were attached to existing polymer systems and were connected to a polymerizable unit leading to monomer containing the oligothiophenes as side groups. Subsequently the properties of the monomers and the polymers were investigated. A butylcellulose derivative carrying terthienyl side chains (BCTTE, 26) was synthesized starting from cellulose acetate and 5-(2-chloroethyl)-2,2':5',2'-terthiophene (4). The polymer had a degree of substitution (DS) of the butyl and terthienyl side chains of DSbutyl = 1.9 and DSterth = 0.35, respectively. It was successfully spread on a Langmuir-Blodgett (LB) trough and then transferred to several solid substrates. X-rays reflectometry showed an ordered architecture of the cellulose backbones. However, the terthiophene side groups were found as isotropically aligned by polarized UV-Vis spectroscopy. When used as anode material in the electropolymerization of 3-pentylthiophene (28), polythiophene was grafted onto the cellulose backbone through the terthienyl side groups. The polythiophene chains showed an average anisotropic alignment of 20 % along the LB dipping direction, calculated by means of polarized UV-Vis spectroscopy. A second butylcellulose derivative carrying sexithienyl side chains (BCST) was synthesized and investigated, starting from butylcellulose and 2-[b ', b ''-dipentyl-5'''-(2-hydroxyethyl)-2,2': 5',2':5',2'':5'',2'':5'',2'''-sexithiophen-5-yl]-ethyl p-toluensulfonate (7). The polymer showed formation of stable LB monolayers at the air-water interface, but its transfer onto solid substrates was not successful. A poly(p-phenylene-ethynylene) bearing sexithienyl side chains (BzAcST, 31) was prepared by reaction of the two monomers 2-[b ', b ''-dipentyl-5'''-(2-hydroxyethyl)-2,2': 5',2':5',2'':5'',2'':5'',2'''-sexithiophen-5-yl]-ethyl 2,5-diiodobenzoate (15) and 2-[b', b ''-dipentyl-5'''-(2-hydroxyethyl)-2,2':5',2':5',2'':5'',2'':5'',2'''-sexithiophen-5-yl]-ethyl 2,5-diethynylbenzoate (18). The polymer was obtained as insoluble product. Upon oxidation with FeCl3 (doping) of the polymer suspension, BzAcST showed an electrical conductivity of ó = 2.5 . 10 -6 S/cm, a typical value for semiconductors. The IR spectrum of the doped polymer presented the diagnostic bands of oxidized sexithiophene in good agreement with literature results. Along with the monomer and polymer synthesis, an a,a '-disubstituted sexithiophene, b ', b ''-dipentyl-5,5'''-bis-(2-hydroxyethyl)-2,2':5',2':5',2'':5'',2'':5'',2'''-sexithiophene (6a),was synthesized and characterized. The UV-Vis absorption of the chromophore wasinvestigated as a function of temperature and different solvents, showing a blue-shift of the absorption maximum with increasing temperature and a red-shift changing the solvent from hexane to ethanol to toluene. Monitoring the change of the UV-Vis spectrum upon electrochemical oxidation, the oxidized chromophore showed a new broad absorption band, red shifted with respect to the p -p* transition of the neutral state. Upon reduction, the new band disappeared and the UV-Vis spectrum of the chromophore was restored. Such oxidation-reduction cycles were totally reversible. This feature, together with the absorption maximum falling in the visible region, makes this chromophore a suitable compound for the development of an electrochemical sensor.Attempts to polymerize acrylic monomers carrying sexythienyl side chains both via radical polymerization, as in the case of 2-[b ', b ''-dipentyl-5'''-(2-hydroxyethyl)-2,2': 5',2':5',2'':5'',2'':5'',2'''-sexithiophen-5-yl]-ethyl acrylate (8), and anionic polymerization, as in the case of 2-{b ', b ''-dipentyl-5'''-[2-(tertbutyldimethylsiloxy)ethyl]-2,2':5',2':5',2'':5'',2'': 5'',2''' -sexithiophen-5-yl}-ethylacrylate (29), were not successful, probably due to the steric hindrance of the oligothiophene side group. However, due to the time consuming and therefore restricted availability of the monomers, a screening of the polymerization conditions towards the formation of polymeric material was not possible.

Formtreue organische Makrocyclen mit polarem Innenraum

Zusammenfassung Die Arbeit beschreibt die Synthese und Eigenschaften von formtreuen organischen Makrocyclen mit intraannularen polaren Gruppen. Dabei wurden zunächst entsprechende bifunktionalisierte Acetylenbausteine (Halbringe) hergestellt, welche anschließend in einer oxidativen Glaser-Eglington Kupplung zu den Makrocyclen umgesetzt wurden.Am Anfang wurden Sulfonat-funktionalisierte Makrocyclen untersucht. Diese ließen sich mittels der Templatmethode in hohen Ausbeuten synthetisieren. Nach der Abspaltung des Templatbausteins, der gleichzeitig als Schutzgruppe für die Sulfonsäure diente, erhielt man den entsprechenden Makrocyclus als Tetra-n-butylammonium-Salz. Vor dem Hintergrund ionenleitfähige Materialien zu erhalten, wurde anschließend das organische Kation durch anorganische Kationen (z.B. Li+, Na+) ausgetauscht. Dies führte jedoch zur Bildung unlöslicher Produkte, die sich nicht eindeutig charakterisierten ließen.Ein anderer Ansatz zu löslichen Makrocyclen mit polarem Innenraum zu gelangen war die Synthese eines Dipeptid-funktionalisierten Makrocyclus. Dies geschah im Hinblick auf die eventuelle Eignung der Makrocyclen als Rezeptormoleküle für Gäste biologischen Ursprungs. Dabei ließen sich die entsprechenden Dipeptid-funktionalisierten Halbringe auf einfache Weise darstellen, jedoch trat bei der anschließenden Glaser-Kupplung, wahrscheinlich bedingt durch den hohen molaren Überschuß an Kupfersalzen, als Hauptreaktion die Abspaltung des Peptidrests auf. Daher wurde sich nun der Carbonsäuregruppe als polaren Baustein im Inneren der Ringe zugewandt. Diese sollten eine anschließende Peptidankupplung zulassen.Es wurden vier verschiedene Makrocyclen mit intraannularen Carboxylatgruppen synthetisiert. Auch hier waren die Makrocyclen in Form ihrer Methylester noch gut, in Form der Säuren oder deren Salze oftmals nur noch sehr gering löslich. Um die Löslichkeit zu verbessern, wurde dabei die Polaritätsverteilung am Ring (polarer Innenraum, unpolarer Außenraum) durch das Anbringen von löslichkeits-vermittelnden Gruppen zum Teil aufgegeben. Dabei hat sich gezeigt, daß es erst durch die Verwendung von verzweigten (S)-Methylbutoxy-Gruppen innerhalb des Rings oder langen Alkoxyketten außerhalb des Rings möglich war, zu löslichen Systemen zu gelangen. Im ersten Fall ist es zum ersten Mal gelungen, einen löslichen Makrocyclus mit zwei freien intra-annnularen Carbonsäuregruppen zu erhalten. Durch die Optimierung der Syntheseroute ist es nunmehr möglich, den Ring im Grammmaßstab herzustellen. Außerdem wurden als Testreaktion beide Säuregruppen mit Methylamin zum Säureamid vollständig umgesetzt. Somit wurde ein System entwickelt, an das sich in Zukunft beliebige Aminosäuren an den Ring anbinden lassen sollten. Zusätzlich sollte sich die Chiralität der (S)-Methylbutoxygruppen auf das Erkennen von chiralen Gästen auswirken.Im zweiten Fall wurden durch das Anbringen von vier Tris(hexadecyloxy)-benzol- oder Tris(dodecyloxy)-benzol- Gruppen an der Peripherie der Ringe nach Hydrolyse der Methylestergruppen ebenfalls lösliche, Carboxylat-funktionalisierte Makrocyclen erhalten. Eine eingehende Untersuchung der Methylester-geschützten Ringe ergab, daß diese beim Schmelzen das Auftreten einer thermotropen flüssigkristallinen Phase zeigen. Die Natur der Mesophase konnte mittels Polarisations-Lichtmikroskopie sowie Röntgenbeugungsmethoden eindeutig als kolumnar-schiefwinklig (colob) charakterisiert werden. Hierbei ist zu bemerken, daß bei ähnlichen Makrocyclen, die über keinen polar gefüllten Innenraum verfügen, keine Mesophase auftritt. Das bedeutet, daß die Raumerfüllung im Inneren der Makrocyclen, bedingt durch die polaren Gruppen, zur Ausbildung einer flüssigkristallinen Phase unbedingt notwendig ist.

Food lipids: their effects on quality and oxidative stability of animal tissues and emulsions

Lipolysis and oxidation of lipids in foods are the major biochemical and chemical processes that cause food quality deterioration, leading to the characteristic, unpalatable odour and flavour called rancidity. In addition to unpalatability, rancidity may give rise to toxic levels of certain compounds like aldehydes, hydroperoxides, epoxides and cholesterol oxidation products. In this PhD study chromatographic and spectroscopic techniques were employed to determine the degree of lipid oxidation in different animal products and its relationship with technological parameters like feeding fat sources, packaging, processing and storage conditions. To achieve this goal capillary gas chromatography (CGC) was employed not only to determine the fatty acids profile but also, after solid phase extraction, the amount of sterols (cholesterol and phytosterols) and cholesterol oxidation products (COPs). To determine hydroperoxides, primary products of oxidation and quantify secondary products UV/VIS absorbance spectroscopy was applied. Beef and pork meat in this study were analysed. In actual fact, lipid oxidation is a major deterioration reaction in meat, meat products and results in adverse changes in the colour, flavour, texture of meat and develops different compounds which should be a risk to human health as oxysterols. On beef and pork meat, a study of lipid fraction during storage was carried out to evaluate its shelf-life and some nutritional features life saturated/unsaturated fatty acids ratio and sterols content, in according to the interest that has been growing around functional food in the last years. The last part of this research was focused on the study of lipid oxidation in emulsions. In oil-in-water emulsions antioxidant activity of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) was evaluated. The rates of lipid oxidation of 1.0% stripped soybean oil-in-water emulsions with DOPC were followed by monitoring lipid hydroperoxide and hexanal as indicators of primary and secondary oxidation products and the droplet surface charge or zeta potential (ζ) of the emulsions with varying concentrations of DOPC were tested. This manuscript reports the main results obtained in the three activities briefly summarized as follows: 1. study on effects of feeding composition on the photoxidative stability of lipids from beef meat, evaluated during storage under commercial retail conditions; 2. evaluation of effects of diets and storage conditions on the oxidative stability of pork meat lipids; 3. study on oxidative behavior of DOPC in stripped soybean oil-in-water emulsions stabilized by nonionic surfactant.

Charakterisierung funktioneller Domänen für GABA und Furosemid auf GABA A-Rezeptoren

ZUSAMMENFASSUNGDie schnelle inhibitorische Neurotransmission im Säugerhirn ist wesentlich GABA-erg vermittelt.Neben GABA binden u.a. Picrotoxinin und TBPS (tert-Butylbicyclophosphorothionat) am GABAA-Rezeptor. Die Bindung von [35S]TBPS wird durch alle am GABAA-Rezeptor bindenden Substanzen moduliert. Zur Untersuchung der GABAA-Rezeptor-Funktionen wurden TBPS-Bindungsstudien an rekombinant exprimierten Rezeptoren in vitro und nativen Rezeptoren in situ verwendet.Die alpha-Untereinheiten spielen bei der gehirnarealspezifischen Auswirkungen verschiedener GABA-Mimetika, der Charakterisierung subtypspezifischer Substanzen und der Ausprägung der GABA-Sensitivitäten eine große Rolle. Für die Detaillierung der höheren GABA-Sensitivität alpha6-enthaltender Rezeptoren wurden Chimären und Punktmutationen zwischen den Untereinheiten alpha1 und alpha6 hergestellt. Nach Austausch des Asparagins 188 in der alpha1-Untereinheit durch das alpha6-entsprechende Lysin zeigten Rezeptoren in Kombination mit den Untereinheiten beta3 und gamma2 eine erhöhte GABA-Sensitivität gegenüber dem Wildtyp. Dementsprechend wiesen alpha6-enthaltende Rezeptoren mit der umgekehrten Punktmutation L187N eine geringere GABA-Sensitivität auf. Furosemid wirkt ausschließlich auf alpha6beta2/3-enthaltende GABAA-Rezeptors GABA-agonistisch. [35S]TBPS-Bindungsstudien an chimären alpha1/alpha6-Rezeptoren weisen auf eine niedrigpotente Bindungsstelle für Furosemid im extrazellulären Sequenzabschnitt zwischen der Aoc I-Schnittstelle und der TM3-Region hin. Die Substanz 4 PIOL zeigte subtypspezifischen Charakter am GABAA-Rezeptor. In den [35S]TBPS-Autoradiographien und den Bindungsstudien an Membranen wirkte 4 PIOL auf alpha6-enthaltende Rezeptoren schwach GABA-mimetisch bzw. agonistisch, in den [35S]TBPS-Bindungsstudien an alpha6-enthaltenden rekombinanten Rezeptoren schwach negativ modulatorisch oder antagonistisch.