UTILIZAÇÃO da PRÓPOLIS E ÁLCOOL ETÍLICO NO CONTROLE DE Salmonella em RAÇÕES AVÍCOLAS

Em quatro experimentos foram avaliados como agentes antibacterianos os produtos própolis em solução alcoólica e álcool etílico, adicionados às rações artificialmente contaminadas com os respectivos sorotipos: Salmonella typhimurium Nalr - Specr, (resistentes ao ácido Nalidíxico e a Spectinomicina) nos três primeiros experimentos e Salmonella agona Nalr - Specr, Salmonella infantis Nalr - Specr e Salmonella enteritidis Nalr - Specr no quarto experimento. As rações foram fornecidas a grupos de 10-16 pintos de corte de um dia. em todos os experimentos os produtos testados foram adicionados na base de 2% da ração. Quando se utilizou solução hidroalcóolica de própolis (exp. 1), seguidas 120 horas após o desafio, detectou-se a presença da bactéria nos cecos. No segundo experimento, testou-se a solução de própolis e seu diluente, o álcool etílico; seguidas 96 horas após o desafio, não foi observada a presença da bactéria nos cecos (< 2,0 log10). Avaliou-se, no terceiro experimento, a ação da solução de própolis e do álcool etílico no tempo, adicionados na ração 14 dias e 28 dias antes do fornecimento às aves. Após 72 horas do desafio, a leitura nas placas acusou a presença da bactéria nos cecos. Dentro deste último período, também se avaliou a ação da própolis em pó (extrato seco) e esse mesmo extrato em uma solução aquosa, adicionados à ração 48 horas antes do fornecimento às aves sendo que os resultados confirmaram a presença da bactéria nos cecos. No quarto experimento avaliou-se somente o álcool etílico nas rações artificialmente contaminadas com os sorotipos S. agona, S. enteritidis e S. infantis, registrando-se contagem zero (<2,0 log10) apenas com o último sorotipo. Os resultados obtidos permitem concluir que o tratamento com a solução de própolis apresentou ação sobre a S. typhimurium somente quando em solução alcóolica, dentro de um período de 48 horas, indicando que o efeito bactericida se deveu ao álcool etílico presente na solução. A ação do tratamento com o álcool etílico sobre os demais sorotipos demonstrou resultado parcial sendo observado efeito bactericida nos sorotipos S. typhimurium e S. enteritidis artificialmente inoculados na ração.

Automedicação e guarda de medicamentos por universitários das áreas de saúde e tecnologia

This study aimed to compare self-medication and domestic drug storage among undergraduate students in the areas of health and technology. This is a descriptive study of cross-sectional type and quantitative approach, conducted in a Public University of Natal, Rio Grande do Norte, Brazil. The sample consisted of 300 students of the third year of undergraduate courses at the Center for Health Sciences and Technology Center, selected through a simple random sample. The project was authorized by the Ethics Committee of Federal University of Rio Grande do Norte (CAAE 0137.0.051.000-10). Data collection lasted twelve months and was conducted during the period of study participants, in the university environment. The instrument for data collection was a structured questionnaire consisting of open and closed questions. For data analysis, we used descriptive statistics and applied Fisher s exact test and Chi-square test with adopted level of significance α=5% and 10%. For the variables that correlated with self-medication (p<0.05), we subsequently calculated the odds ratios and confidence intervals. The prevalence of undergraduate students who performed self-medication in the 15 days prior to the collection accounted for 33.7% and, by analyzing each knowledge area, we verified was a higher prevalence of self-medication among students in the technological area (37.3%). The analysis of the socio-demographic characteristics of the participants in this practice revealed a significant difference between the knowledge areas in the income and self-medication variables (p=0.005). General analgesics and antipyretics (N02) represent the therapy group most used in self-medication (57.4%), especially acetaminophen (28.7%), and the main health situations that motivated this practice related to pain, especially headaches (48.5%). Regarding the indication of the drugs used, the majority of students self-medicated themselves on their own (71.3%). As regards to the in-home drug storage, most of the participants had a home pharmacy (88%). By analyzing the socioeconomic characteristics, the variables medical service and home medicine presented a significant difference (p=0.002). General 10 analgesics and antipyretics constituted the medicinal products most found in the home pharmacies, especially acetaminophen. The main room used for the drug storage was the kitchen (36.4%), most students kept these products in boxes of different materials (38.6%) and the medicines stored at home of most of the participants were not easily accessible to children (75%). The results reinforce the need to develop strategies, from the reality found, aiming to encourage and implement educational and preventive activities with undergraduate students on the importance of proper self-medication and in-home drug storage. Despite the sample in our study is relatively small, not representative for the whole country, we believe that, at national level, the panorama of the subject does not present major differences

Uma perspectiva de extensão do modelo de aceitação de tecnologia para explicar o uso de linguagens de desenvolvimento WEB: pesquisa com desenvolvedores Pyton e Java

The spread of the Web boosted the dissemination of Information Systems (IS) based on the Web. In order to support the implementation of these systems, several technologies came up or evolved with this purpose, namely the programming languages. The Technology Acceptance Model TAM (Davis, 1986) was conceived aiming to evaluate the acceptance/use of information technologies by their users. A lot of studies and many applications have used the TAM, however, in the literature it was not found a mention of the use of such model related to the use of programming languages. This study aims to investigate which factors influence the use of programming languages on the development of Web systems by their developers, applying an extension of the TAM, proposed in this work. To do so, a research was done with Web developers in two Yahoo groups: java-br and python-brasil, where 26 Java questionnaires and 39 Python questionnaires were fully answered. The questionnaire had general questions and questions which measured intrinsic and extrinsic factors of the programming languages, the perceived usefulness, the perceived ease of use, the attitude toward the using and the programming language use. Most of the respondents were men, graduate, between 20 and 30 years old, working in the southeast and south regions. The research was descriptive in the sense of its objectives. Statistical tools, descriptive statistics, main components and linear regression analysis were used for the data analysis. The foremost research results were: Java and Python have machine independence, extensibility, generality and reliability; Java and Python are more used by corporations and international organizations than supported by the government or educational institutions; there are more Java programmers than Python programmers; the perceived usefulness is influenced by the perceived ease of use; the generality and the extensibility are intrinsic factors of programming languages which influence the perceived ease of use; the perceived ease of use influences the attitude toward the using of the programming language

A utilização do controle estatístico do processo para o monitoramento do sangue: estudo de caso no Memonorte-RN

The present work is grounded basically on the use of the Basic Tools for the Statistic Process Control SPC, with the intent to detect non-conformities on a given productive process. It consists on a case study accomplished at a Hemocenter in Natal (Rio Grande do Norte). In this study it is shown that, the Statistic Process Control Technique, which was used as a tool, is useful to identify on-conformities on the volume of hemocomponents. The gathering of the used data was performed by means of document analysis, direct observations and database queries. The results achieved from the study show that the analyzed products, even though when they have presented, in some cases, points out of control, they satisfied the ANVISA standards. Finally, suggestions for further improvement of the final product and guidance for future employment of CEP, also extended to other lines of production, are presented

Fonte de energia alternativa: um estudo sobre a percepção ambiental, social e econômica do biodiesel com docentes do Centro de Tecnologia do gás da cidade de Natal RN

Meaning fuel and renewal energy source s derivative additives, the term biodiesel exists in Brazil since 1980, when it was signed its first patent by Expedito Parente. Since then, its importance has grown gradually due to the worsening of the ambient problems, since its use has became a highly promising alternative to the pollution decrease, as in the carbon dioxide issue as with the smoke and sulfur oxide. In Brazil, it was created the National Program of Production, whose objective is to insert the new product in the country s energy matrix, strengthening the economy and creating new employment opportunities, being an important product to the national energetic independence, since Brazil still imports diesel to its domestic consumption. This study aims to identify the ambient, social and economic perception of the teachers from the Technology Center of Natal city (CTGÁS-RN) to the biodiesel. For that, it was used a questionnaire closed questions, organized in the likart scale, directed to the tree spheres of the research analysis, the biodiesel and its social, ambient and economic nuances, totaling 31 questionnaires full answered. In its objectives, the research was descriptive and in its approach it was qualitative. To the data analysis it was used statistical tools (Statistic software, 6.1 version and Microsoft Excel 2003). The research revealed the predominance of the ambient aspect in the sight of the teachers, followed by the social ones. The economic factors represent a minor percentage in the analysis when compared to other

Análise crítica dos produtos de mobilidade sentada - cadeiras de rodas - utilizados por crianças e adolescentes com paralisia cerebral em Natal/RN e outros municípios do Rio Grande do Norte

The objective of this work is to critically analyze the seated mobility adaptive equipment, wheelchair, used by non-ambulatory children/adolescents diagnosed with cerebral palsy of the quadriplegy type with ages in between 0-18 years old in the municipal city of Natal/RN and of other ones in the state of Rio Grande do Norte. This study is characterized as descriptive as it took into consideration the individualized conditions of each child/adolescent and of their home environment, and also evaluates the condition of the used seated mobility devices such as wheelchairs or strollers. Thirty three (33) subjects which had a wheelchair prescribed by a healthcare professional specialist in adaptive equipment within the past 3 years were selected. A questionnaire was applied through a phone with the patient s primary care giver or parents. The results obtained showed that all the equipment being used had an anatomical seat and back and the tilt system mechanism and even though most of the patients required small individual adjustments upon receiving the wheelchair in order to accommodate to the patients characteristics. From the point of view of the caregiver/parents interviewed, 97% described satisfied with the equipment and report assistance with mobility (97%), comfort (82%) and good posture (82%) as the main positive aspects from the equipment. The results also describe the aspects related to the maintenance, time used and activities developed that were reported by the patients. The conclusion therefore is that in order to select the equipment to meet the needs of the consumer it is necessary that: an appropriate wheelchair prescription takes place, the up-to-date knowledge of equipment available in the market, the appropriate use of the resources from the concession programs of the government that purchase equipment and the establishment of link in between the manufacturers, patients and the caregivers

Qualidade em serviços de saúde: uma contribuição à definição de um modelo paramétrico e padrão de qualidade do tempo agendado para consulta ambulatorial

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Utilização de Trigo em ou Moído em Dietas Para Frangos de Corte

Foi conduzido um experimento com o objetivo de avaliar os efeitos da utilização de trigo em grão ou moído sobre o desempenho e as características de carcaça de frangos de corte nos períodos de 21 a 42 e 21 a 49 dias de idade. Foram utilizados 2240 machos, de 21 dias de idade, da linhagem Ross, distribuídos em um delineamento inteiramente ao acaso em esquema fatorial 2 x 3 mais uma testemunha sem inclusão de trigo, sendo os fatores a forma física do trigo (grão e moído) e os níveis de inclusão de trigo (15, 30 e 45%), totalizando sete tratamentos, com oito repetições de 40 aves cada. As dietas foram isoenergéticas e isonutricionais. Não ocorreram diferenças estatísticas entre os fatores estudados, assim como não ocorreram interações entre os fatores sobre as características de desempenho e de carcaça estudadas. Pelos resultados obtidos, é possível concluir que a inclusão de até 45% de trigo, em grão ou moído, não altera o desempenho e as características de carcaças dos frangos de corte no período de 21 a 49 dias de idade.

Desenvolvimento de um ressoador retangular de fenda com múltiplas camadas de substrato e com utilização de material PBG para sistema de comunicação sem fio

In the globalized world modern telecommunications have assumed key role within the company, causing a large increase in demand for the wireless technology of communication, which has been happening in recent years have greatly increased the number of applications using this technology. Due to this demand, new materials are developed to enable new control mechanisms and propagation of electromagnetic waves. The research to develop new technologies for wireless communication presents a multidisciplinary study that covers from the new geometries for passive antennas, active up to the development of materials for devices that improve the performance at the frequency range of operation. Recently, planar antennas have attracted interest due to their characteristics and advantages when compared with other types of antennas. In the area of mobile communications the need for antennas of this type has become increasingly used, due to intensive development, which needs to operate in multifrequency antennas and broadband. The microstrip antennas have narrow bandwidth due to the dielectric losses generated by irradiation. Another limitation is the degradation of the radiation pattern due to the generation of surface waves in the substrate. Some techniques have been developed to minimize this limitation of bandwidth, such as the study of type materials PBG - Photonic Band Gap, to form the dielectric material. This work has as main objective the development project of a slot resonator with multiple layers and use the type PBG substrate, which carried out the optimization from the numerical analysis and then designed the device initially proposed for the band electromagnetic spectrum between 3-9 GHz, which basically includes the band S to X. Was used as the dielectric material RT/Duroid 5870 and RT/Duroid 6010.LM where both are laminated ceramic-filled PTFE dielectric constants 2.33 and 10.2, respectively. Through an experimental investigation was conducted an analysis of the simulated versus measured by observing the behavior of the radiation characteristics from the height variation of the dielectric multilayer substrates. We also used the LTT method resonators structures rectangular slot with multiple layers of material photonic PBG in order to obtain the resonance frequency and the entire theory involving the electromagnetic parameters of the structure under consideration. xviii The analysis developed in this work was performed using the method LTT - Transverse Transmission Line, in the field of Fourier transform that uses a component propagating in the y direction (transverse to the real direction of propagation z), thus treating the general equations of the fields electric and magnetic and function. The PBG theory is applied to obtain the relative permittivity of the polarizations for the sep photonic composite substrates material. The results are obtained with the commercial software Ansoft HFSS, used for accurate analysis of the electromagnetic behavior of the planar device under study through the Finite Element Method (FEM). Numerical computational results are presented in graphical form in two and three dimensions, playing in the parameters of return loss, frequency of radiation and radiation diagram, radiation efficiency and surface current for the device under study, and have as substrates, photonic materials and had been simulated in an appropriate computational tool. With respect to the planar device design study are presented in the simulated and measured results that show good agreement with measurements made. These results are mainly in the identification of resonance modes and determining the characteristics of the designed device, such as resonant frequency, return loss and radiation pattern

Utilização de esgotos domésticos tratados através de um sistema biológico na produção de mudas de Croton floribundus Spreng. (Capixingui) E Copaifera langsdorffii Desf. (Copaíba)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Um ambiente integrado para manipulação de tráfego multicast

In the two last decades of the past century, following the consolidation of the Internet as the world-wide computer network, applications generating more robust data flows started to appear. The increasing use of videoconferencing stimulated the creation of a new form of point-to-multipoint transmission called IP Multicast. All companies working in the area of software and the hardware development for network videoconferencing have adjusted their products as well as developed new solutionsfor the use of multicast. However the configuration of such different solutions is not easy done, moreover when changes in the operational system are also requirede. Besides, the existing free tools have limited functions, and the current comercial solutions are heavily dependent on specific platforms. Along with the maturity of IP Multicast technology and with its inclusion in all the current operational systems, the object-oriented programming languages had developed classes able to handle multicast traflic. So, with the help of Java APIs for network, data bases and hipertext, it became possible to the develop an Integrated Environment able to handle multicast traffic, which is the major objective of this work. This document describes the implementation of the above mentioned environment, which provides many functions to use and manage multicast traffic, functions which existed only in a limited way and just in few tools, normally the comercial ones. This environment is useful to different kinds of users, so that it can be used by common users, who want to join multimedia Internet sessions, as well as more advenced users such engineers and network administrators who may need to monitor and handle multicast traffic

ISE-SPL: Uma abordagem baseada em linha de produtos de software aplicada à geração automática de sistemas para educação médica na plataforma E-learning

E-learning, which refers to the use of Internet-related technologies to improve knowledge and learning, has emerged as a complementary form of education, bringing advantages such as increased accessibility to information, personalized learning, democratization of education and ease of update, distribution and standardization of the content. In this sense, this paper aims to develop a tool, named ISE-SPL, whose purpose is the automatic generation of E-learning systems for medical education, making use of concepts of Software Product Lines. It consists of an innovative methodology for medical education that aims to assist professors of healthcare in their teaching through the use of educational technologies, all based on computing applied to healthcare (Informatics in Health). The tests performed to validate the ISE-SPL were divided into two stages: the first was made by using a software analysis tool similar to ISE-SPL, called SPLOT and the second was performed through usability questionnaires to healthcare professors who used ISESPL. Both tests showed positive results, proving it to be an efficient tool for generation of E-learning software and useful for professors in healthcare

Estudo da Potencialidade da produção de tijolos de adobe misturado com outros materiais: uma alternativa de baixo custo para a construção civil

The production of the red pottery brick, made traditionally with clay, is a technique that is already stabled. However, in spite of the little complexity that involves the conventional process of these bricks production, it are exposed to many problems that begin in the fase of exploration of the mines, the problems get worse because of the lack of the clay's characterization, and they continue through the steps of the dough preparation, conformation of the products, the drying and the burning process. The wastefulness is shown and so is the low quality of the material produced. Among other factors, the high use of energy in the burning makes the cost of this material inaccessible to the low income consumer. Besides this, the destruction of the environment around the mines and the use of native vegetation to produce wood - the most used fuel in the pottery industry - make serious environmental damage. The production technique of a new type of simple brick (adobe), that has low cost and no environmental damage, can be the viable altemative to lower the cost of this part of the civil construction, and, consequently, in the building of cheaper houses. In this paper, the results of the mechanical resistance of the adobe brick are shown, using in its composition, clay, natural vegetable fibers, cement and plaster in a process that is completely handcrafted and manual. It is intented to make clear that are possible alternatives to be put in practice, with the simple process, using "raw earth" that has been used in the construction of houses in thousands of years, trying to solve these severe problems. Analysis and tests were performed to find results that could prove the possibility of the utilization of this kind of material. Other studies are in progress, and the new researches are necessary to enrich this work, but it stays the certainty that there is potential to produce bricks from adobe, as an alternative that has low cost to civil construction

Avaliação da potencialidade de argilas de queima clara como matérias-primas para o desenvolvimento de novos produtos cerâmicos

The industries of structural ceramics are among the most important production chains in the state of Rio Grande do Norte. The industry and other interest groups to target the replacement of firewood by natural gas. Studies accordingly concluded that simple change does not guarantee products of superior quality, and that the increase in spending on fuel can economically cripple the use of gas for burning the majority of products manufactured by that action. However some proposals of innovations in terms of process and product are being studied in an attempt to justify the use of natural gas in industry, structural ceramics. One of the aspects investigated is the development of ceramic products differentiated, with new designs and greater value added. Inserted in that context, this paper aims to investigate the potential use of clay-firing clear fabrication of the "bricks of apparent joins drought", a new ceramic product with an innovative way. The development of the work was done in three stages. In the initial stage was held the characterization of raw materials, sought information on physical, chemical, mineralogical and mechanical samples. In the second stage five bodies were made using two of the nine ceramic clay characterized the first step. The masses were analyzed and compared with respect to the size distribution, plasticity and technological properties. In the last part of this work was carried out tests on massive bricks manufactured on an industrial scale. The results show that the nine clays can be used in the manufacture of new ceramic products, is the only constituent of mass ceramic or by mixing with other(s) clay(s

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes