4-hexylbithieno[3,2-b:2′3′-e]pyridine: An efficient electron-accepting unit in fluorene and indenofluorene copolymers for light-emitting devices

4-Hexylbithienopyridine has been prepared as a novel electron-accepting monomer for conjugated polymers. To test its electronic properties, alternating copolymers with fluorene and indenofluorene polymers have been prepared. The copolymers displayed reduction potentials about 0.5 V lower than for the corresponding fluorene and indenofluorene homopolymers, indicating much improved electron-accepting properties. Analysis of the microscopic morphology of thin films of the copolymers by AFM shows that they lack the extensive supramolecular order seen with the homopolymers, which is attributed to the bithienopyridine units disrupting the π-stacking. LEDs using these polymers as the emitting layer produce blue-green emission with low turn-on voltages with aluminum electrodes confirming their improved electron affinity. The indenofluorene copolymer displayed an irreversible red shift in emission at high voltages, which is attributed to oxidation of the indenofluorene units. This red shift occurred at higher potentials than for indenofluorene homopolymers in LEDs, suggesting that the heterocyclic moieties offer some protection against electrically promoted oxidation.

Achieving transparency in carbon labelling for construction materials – Lessons from current assessment standards and carbon labels

The construction industry is one of the largest sources of carbon emissions. Manufacturing of raw materials, such as cement, steel and aluminium, is energy intensive and has considerable impact on carbon emissions level. Due to the rising recognition of global climate change, the industry is under pressure to reduce carbon emissions. Carbon labelling schemes are therefore developed as meaningful yardsticks to measure and compare carbon emissions. Carbon labelling schemes can help switch consumer-purchasing habits to low-carbon alternatives. However, such switch is dependent on a transparent scheme. The principle of transparency is highlighted in all international greenhouse gas (GHG) standards, including the newly published ISO 14067: Carbon footprint of products – requirements and guidelines for quantification and communication. However, there are few studies which systematically investigate the transparency requirements in carbon labelling schemes. A comparison of five established carbon labelling schemes, namely the Singapore Green Labelling Scheme, the CarbonFree (the U.S.), the CO2 Measured Label and the Reducing CO2 Label (UK), the CarbonCounted (Canada), and the Hong Kong Carbon Labelling Scheme is therefore conducted to identify and investigate the transparency requirements. The results suggest that the design of current carbon labels have transparency issues relating but not limited to the use of a single sign to represent the comprehensiveness of the carbon footprint. These transparency issues are partially caused by the flexibility given to select system boundary in the life cycle assessment (LCA) methodology to measure GHG emissions. The primary contribution of this study to the construction industry is to reveal the transparency requirements from international GHG standards and carbon labels for construction products. The findings also offer five key strategies as practical implications for the global community to improve the performance of current carbon labelling schemes on transparency.

Collaborative extension of biodiversity monitoring protocols in the bird watching community

Citizen science projects have demonstrated the advantages of people with limited relevant prior knowledge participating in research. However, there is a difference between engaging the general public in a scientific project and entering an established expert community to conduct research. This paper describes our ongoing acoustic biodiversity monitoring collaborations with the bird watching community. We report on findings gathered over six years from participation in bird walks, observing conservation efforts, and records of personal activities of experienced birders. We offer an empirical study into extending existing protocols through in-context collaborative design involving scientists and domain experts.

Controller design for variable-speed permanent magnet wind turbine generators interfaced with Z-source inverter

Increased awareness of environmental concerns has caused greater interest in developing power sources based on renewable technologies, such as wind. Due to the intermittent nature of the wind speed, output voltage and frequency of the direct driven permanent magnet synchronous generators (PMSG) are normally unsteady. Recently proposed Z-source inverter has been considered as a potential solution for grid interfacing wind power generators, thanks to buck-boost function that the single stage Z-source inverter can offer. Two control methodologies, namely unified controller for isolated operation and a multi-loop controller for grid interfaced operation are investigated in this paper. Theoretical analysis of these two control schemes is presented and experimental results to verify the effectiveness of the control method are also included.

More than just friends? Facebook, disclosive ethics and the morality of technology

Social networking sites have become increasingly popular destinations for people wishing to chat, play games, make new friends or simply stay in touch. Furthermore, many organizations have been quick to grasp the potential they offer for marketing, recruitment and economic activities. Nevertheless, counterclaims depict such spaces as arenas where deception, social grooming and the posting of defamatory content flourish. Much research in this area has focused on the ends to which people deploy the technology, and the consequences arising, with a view to making policy recommendations and ethical interventions. In this paper, we argue that tracing where morality lies is more complex than these efforts suggest. Using the case of a popular social networking site, and concepts about the morality of technology, we disclose the ethics of Facebook as diffuse and multiple. In our conclusions we provide some reflections on the possibilities for action in light of this disclosure.

Social networking and digital gaming media convergence : Classification and its consequences for appropriation

Abstract Within the field of Information Systems, a good proportion of research is concerned with the work organisation and this has, to some extent, restricted the kind of application areas given consideration. Yet, it is clear that information and communication technology deployments beyond the work organisation are acquiring increased importance in our lives. With this in mind, we offer a field study of the appropriation of an online play space known as Habbo Hotel. Habbo Hotel, as a site of media convergence, incorporates social networking and digital gaming functionality. Our research highlights the ethical problems such a dual classification of technology may bring. We focus upon a particular set of activities undertaken within and facilitated by the space – scamming. Scammers dupe members with respect to their ‘Furni’, virtual objects that have online and offline economic value. Through our analysis we show that sometimes, online activities are bracketed off from those defined as offline and that this can be related to how the technology is classified by members – as a social networking site and/or a digital game. In turn, this may affect members’ beliefs about rights and wrongs. We conclude that given increasing media convergence, the way forward is to continue the project of educating people regarding the difficulties of determining rights and wrongs, and how rights and wrongs may be acted out with respect to new technologies of play online and offline.

The social shaping of packaged software selection

As organisations increasingly engage in the selection, purchase, and adoption of packaged software products, how these activities are carried out in practice becomes increasingly relevant for researchers and practitioners. Our focus in this paper is to propose a framework for understanding the packaged software selection process. The functionalist literature on this area of study suggests a number of generic recommendations, which are based on rational assumptions about the process and view the decision making that takes place as producing the “best technology solution.’” To explore this, we conducted a longitudinal, in-depth study of packaged software selection in a small organisation. For interpretation of the case, we draw upon the Social Construction of Technology, a theoretical framework arguing that technology is socially constituted and regarding the process of development as contradictory and uncertain. We offer a number of contributions. First, we further our understanding of packaged software selection with the critique that we offer of the functionalist literature, drawing insights from the emerging critical/constructivist literature and expanding our domain of interest to encompass the wider environment. Second, we weave this together with our experiences in the field, drawing on social constructivism for theoretical support, to develop a framework of packaged software selection that shows how various actors shape the process.

Knowledge integration within innovation process : a technopreneurial perspective

Knowledge Integration (KI) is one of the major aspects driving innovation within an organisation. In this paper, we attempt to develop a better understanding of responses to the challenges of knowledge integration within the innovation process in technology-based firms. Using four technology-based Australian firms, we investigated how knowledge integration may be managed within the context of innovation in technology firms. Previous research highlights the role of four KI tasks that affect the innovation capability within technology-oriented firms, namely team building capability, capturing tacit knowledge, role of Knowledge Management (KM) systems and technological systemic integration. Our findings indicate that in addition to these four tasks, a strategic approach to integrating knowledge for innovation, as well as leadership and management, are essential to achieving effective KI across multiple levels of engagement. Our findings also offer practical insights into how knowledge can be integrated within innovation process, with specific implications for managers.

Food and beverage intake in Australian children aged 12-16 months participating in the NOURISH and SAIDI studies

Objective To describe the quantity and diversity of food and beverage intake in Australian children aged 12–16 months and to determine if the amount and type of milk intake is associated with dietary diversity. Methods Mothers participating in the NOURISH and South Australian Infant Dietary Intake (SAIDI) studies completed a single 24-hour recall of their child's food intake, when children (n=551) were aged 12–16 months. The relationship between dietary diversity and intake of cow's milk, formula or breastmilk was examined using one-way ANOVA. Results Dairy and cereal were the most commonly consumed food groups and the greatest contributors to daily energy intake. Most children ate fruit (87%) and vegetables (77%) on the day of the 24-hour recall while 91% ate discretionary items. Half the sample ate less than 30 g of meat/alternatives. A quarter of the children were breastfeeding while formula was consumed by 32% of the sample, providing 29% of daily energy intake. Lower dietary diversity was associated with increased formula intake. Conclusions The quality of dietary intake in this group of young children is highly variable. Most toddlers were consuming a diverse diet, though almost all ate discretionary items. The amount and type of meat/alternatives consumed was poor. Implications Health professionals should advise parents to offer iron-rich foods, while limiting discretionary choices and use of formula at an age critical in the development of long-term food preferences.

Surviving (thriving) in academia : feminist support networks and women ECRs

In this paper, we reflect upon our experiences and those of our peers as doctoral students and early career researchers in an Australian political science department. We seek to explain and understand the diverse ways that participating in an unofficial Feminist Reading Group in our department affected our experiences. We contend that informal peer support networks like reading groups do more than is conventionally assumed, and may provide important avenues for sustaining feminist research in times of austerity, as well as supporting and enabling women and emerging feminist scholars in academia. Participating in the group created a community of belonging and resistance, providing women with personal validation, information and material support, as well as intellectual and political resources to understand and resist our position within the often hostile spaces of the University. While these experiences are specific to our context, time and location, they signal that peer networks may offer critical political resources for responding to the ways that women’s bodies and concerns are marginalised in increasingly competitive and corporatised university environments.

The sideways hourglass : establishing the lemniscate as a narrative structure for writing and reading non-linear stories

This thesis is a study in narratology that examines the pre-theoretical ideas that underlie the study of narrative and time. The thesis explores how the lemniscate can be transported from geometry to narrative in order to structure a non-linear story that breaks the rules of causality and chronology by coupling physical movement through space with the backward pull of memory. The findings offer new possibilities for understanding the nexus between shape and story and for recording non-linear narratives that are marked by simultaneity, counterpoint, and reversal.

Young people and citizenship-delayed, diminished and empty?

This paper is presented in workshop format in order to meet the style and themes of the conference, and seeks to explore as fully as possible with participants issues, concerns and proposals around the discourse of young people and citizenship. This paper takes the position that the relationship between young people and citizenship is complex and in places contradictory, and while Ruth Lister (1998), argues for an 'inclusionary potential', a central concern is that the citizenship that young people get is as Hartley Dean (1997), suggests, at best 'ambiguous', and at its worst, 'diminished'. Under not so new Labour, the term has according to Gail Lewis (1998) re-emerged as a 'category of political articulation', imbued with the pronouncements of Charles Murray (1995) on the underclass, and Amitai Etzioni (1996), on the virtues of Communitarianism and the central assertion that in relation to young people and certain communities, 'rights have exceeded responsibilities'. This body of opinion has proved to be seductive to a government dedicated to joined up solutions in the battle against social exclusion and to the reconfiguration of the welfare state to place the onus for welfare and social provision on to individuals and communities. Those who work with young people and young people themselves may wish to be proactive in asserting the kind of citizenship they require, rights-based, expansive and supportive, rather than accept an imposed version devoid of rights but full to the brim of authoritarian measures, vindictive proposals and narrow horizons. This paper will engender debate and reflection and offer a context of the erosion of young people's rights over the last 20 years, Hartley Dean (1996), and will consider the work of T.H. Marshall (1950) in dividing citizenship into three elements: the civil element, the political element, and the social element. The paper will explore in workshop tradition, strategies and proposals for action relevant to practitioners and academics, such as the reduction in the voting age to 16.

The functional significance of fruit exocarp on host selection and oviposition by Queensland fruit fly, Bactrocera tryoni (Froggatt) (Tephritidae: Diptera)

Queensland fruit fly is Australia's most serious insect pest of horticulture. The fly lays its eggs into fruit, where they hatch into maggots which destroy the fruit. Understanding egg laying behaviour, known as oviposition, is a critical but under-researched aspect of fruit fly biology. This thesis focused on three aspects of oviposition: the role of fruit peel as a physical barrier to oviposition; the quality of fruit for maggot development; and the structure and wear of the egg laying organ – the ovipositor. Results showed that flies selected fruit based on their suitability for offspring survival, not because of the softness or hardness of fruit peel. Previously reported use of holes or wounds in fruit peel by ovipositing females was determined to be a mechanism which saved the female time, not a mechanism to reduce ovipositor wear. The results offer insights into the evolution of host use by fruit flies and their sustainable management.

Perspectives about exercise from adults with venous leg ulcers : an exploratory study

Objective Exercise has the potential to offer a range of health benefits in addition to improving healing outcomes for people with venous leg ulcers. However despite evidence based recommendations, most of these individuals do not engage in regular exercise. The aim of this study was to gain an understanding of the perspectives of adults with venous leg ulcers, in relation to exercise. Method This was a qualitative design using semi-structured interviews and discussions. Ten participants with venous leg ulceration volunteered to participate. Recruitment was through a specialist wound clinic. Verbatim data were collected by an experienced moderator using a semi-structured guide. Data saturation was reached after three group discussions and two interviews. A random selection of transcripts was sent back to the participants for verification. Thematic content analysis was used to determine major themes and categories. Two transcripts were independently analysed, categories and themes independently developed, cross checked and found comparable. Remaining transcripts were analysed using developed categories and codes. Results Regardless of their current exercise routine, participants reported exercising prior to venous leg ulceration and expressed an interest in either becoming active or maintaining an active lifestyle. Overall four themes emerged from the findings: i) participant understanding of the relationship between chronic venous insufficiency and exercise patterns, ii) fear of harm impacts upon positive beliefs and attitudes to exercise, iii) perceived factors limit exercise and iv) structured management facilitates exercise. Conclusion The value of exercise in improving outcomes in venous leg ulcers lies in its capacity to promote venous return and reduce the risk of secondary conditions in this population. Despite motivation and interest in being exercise active, people with venous leg ulcers report many obstacles. Further exploration of mechanisms that assist this patient population and promote understanding about management of barriers, coupled with promotion of enabling factors is vital for improving their exercise participation.

The lily, client and measure of Bruno Taut’s Glashaus

The Glashaus is considered a significant exemplar of early modernist architecture and is generally accepted as having had Expressionist origins. However, current research has revealed that the design origins of this important building are not fully understood. While the historical record acknowledges the contributions of the bohemian poet Paul Scheerbart and the art critic Adolf Behne, the role of the Glashaus’ architect, Bruno Taut, has been moderated. In an attempt to rectify this situation this article proposes that the design origins of the Glashaus can be found in a strong architect-client interaction. It is argued that the Glashaus’ client, the Deutsche Luxfer Prismen Syndikat under the directorship of Frederick Keppler, exerted a significant influence on its design. In order to showcase the glazed products of Luxfer in the best manner possible, Keppler insisted that the design feature a glazed dome, electric lighting, a fountain as well as a cascade. Given the detailed stipulations of this brief, Taut had few options other than to offer interpretations of precedent that derived from the Victoria regia lily and Gothic proportioning. By expounding this architect-client relationship, this article expands our understanding of the Glashaus, and reinvigorates our understanding of this important early example of modern architecture.