Effect of mixing, particle interaction, and spatial dimension on the glass transition

In this thesis, the influence of composition changes on the glass transition behavior of binary liquids in two and three spatial dimensions (2D/3D) is studied in the framework of mode-coupling theory (MCT).The well-established MCT equations are generalized to isotropic and homogeneous multicomponent liquids in arbitrary spatial dimensions. Furthermore, a new method is introduced which allows a fast and precise determination of special properties of glass transition lines. The new equations are then applied to the following model systems: binary mixtures of hard disks/spheres in 2D/3D, binary mixtures of dipolar point particles in 2D, and binary mixtures of dipolar hard disks in 2D. Some general features of the glass transition lines are also discussed. The direct comparison of the binary hard disk/sphere models in 2D/3D shows similar qualitative behavior. Particularly, for binary mixtures of hard disks in 2D the same four so-called mixing effects are identified as have been found before by Götze and Voigtmann for binary hard spheres in 3D [Phys. Rev. E 67, 021502 (2003)]. For instance, depending on the size disparity, adding a second component to a one-component liquid may lead to a stabilization of either the liquid or the glassy state. The MCT results for the 2D system are on a qualitative level in agreement with available computer simulation data. Furthermore, the glass transition diagram found for binary hard disks in 2D strongly resembles the corresponding random close packing diagram. Concerning dipolar systems, it is demonstrated that the experimental system of König et al. [Eur. Phys. J. E 18, 287 (2005)] is well described by binary point dipoles in 2D through a comparison between the experimental partial structure factors and those from computer simulations. For such mixtures of point particles it is demonstrated that MCT predicts always a plasticization effect, i.e. a stabilization of the liquid state due to mixing, in contrast to binary hard disks in 2D or binary hard spheres in 3D. It is demonstrated that the predicted plasticization effect is in qualitative agreement with experimental results. Finally, a glass transition diagram for binary mixtures of dipolar hard disks in 2D is calculated. These results demonstrate that at higher packing fractions there is a competition between the mixing effects occurring for binary hard disks in 2D and those for binary point dipoles in 2D.

Bayesian space-time data fusion for real-time forecasting and map uncertainty

Environmental computer models are deterministic models devoted to predict several environmental phenomena such as air pollution or meteorological events. Numerical model output is given in terms of averages over grid cells, usually at high spatial and temporal resolution. However, these outputs are often biased with unknown calibration and not equipped with any information about the associated uncertainty. Conversely, data collected at monitoring stations is more accurate since they essentially provide the true levels. Due the leading role played by numerical models, it now important to compare model output with observations. Statistical methods developed to combine numerical model output and station data are usually referred to as data fusion. In this work, we first combine ozone monitoring data with ozone predictions from the Eta-CMAQ air quality model in order to forecast real-time current 8-hour average ozone level defined as the average of the previous four hours, current hour, and predictions for the next three hours. We propose a Bayesian downscaler model based on first differences with a flexible coefficient structure and an efficient computational strategy to fit model parameters. Model validation for the eastern United States shows consequential improvement of our fully inferential approach compared with the current real-time forecasting system. Furthermore, we consider the introduction of temperature data from a weather forecast model into the downscaler, showing improved real-time ozone predictions. Finally, we introduce a hierarchical model to obtain spatially varying uncertainty associated with numerical model output. We show how we can learn about such uncertainty through suitable stochastic data fusion modeling using some external validation data. We illustrate our Bayesian model by providing the uncertainty map associated with a temperature output over the northeastern United States.

Design and Characterization of Curved and Spherical Flexure Hinges for Planar and Spatial Compliant Mechanisms

A flexure hinge is a flexible connector that can provide a limited rotational motion between two rigid parts by means of material deformation. These connectors can be used to substitute traditional kinematic pairs (like bearing couplings) in rigid-body mechanisms. When compared to their rigid-body counterpart, flexure hinges are characterized by reduced weight, absence of backlash and friction, part-count reduction, but restricted range of motion. There are several types of flexure hinges in the literature that have been studied and characterized for different applications. In our study, we have introduced new types of flexures with curved structures i.e. circularly curved-beam flexures and spherical flexures. These flexures have been utilized for both planar applications (e.g. articulated robotic fingers) and spatial applications (e.g. spherical compliant mechanisms). We have derived closed-form compliance equations for both circularly curved-beam flexures and spherical flexures. Each element of the spatial compliance matrix is analytically computed as a function of hinge dimensions and employed material. The theoretical model is then validated by comparing analytical data with the results obtained through Finite Element Analysis. A case study is also presented for each class of flexures, concerning the potential applications in the optimal design of planar and spatial compliant mechanisms. Each case study is followed by comparing the performance of these novel flexures with the performance of commonly used geometries in terms of principle compliance factors, parasitic motions and maximum stress demands. Furthermore, we have extended our study to the design and analysis of serial and parallel compliant mechanisms, where the proposed flexures have been employed to achieve spatial motions e.g. compliant spherical joints.

Rainfall spatial predictions: a two-part model and its assessment

Spatial prediction of hourly rainfall via radar calibration is addressed. The change of support problem (COSP), arising when the spatial supports of different data sources do not coincide, is faced in a non-Gaussian setting; in fact, hourly rainfall in Emilia-Romagna region, in Italy, is characterized by abundance of zero values and right-skeweness of the distribution of positive amounts. Rain gauge direct measurements on sparsely distributed locations and hourly cumulated radar grids are provided by the ARPA-SIMC Emilia-Romagna. We propose a three-stage Bayesian hierarchical model for radar calibration, exploiting rain gauges as reference measure. Rain probability and amounts are modeled via linear relationships with radar in the log scale; spatial correlated Gaussian effects capture the residual information. We employ a probit link for rainfall probability and Gamma distribution for rainfall positive amounts; the two steps are joined via a two-part semicontinuous model. Three model specifications differently addressing COSP are presented; in particular, a stochastic weighting of all radar pixels, driven by a latent Gaussian process defined on the grid, is employed. Estimation is performed via MCMC procedures implemented in C, linked to R software. Communication and evaluation of probabilistic, point and interval predictions is investigated. A non-randomized PIT histogram is proposed for correctly assessing calibration and coverage of two-part semicontinuous models. Predictions obtained with the different model specifications are evaluated via graphical tools (Reliability Plot, Sharpness Histogram, PIT Histogram, Brier Score Plot and Quantile Decomposition Plot), proper scoring rules (Brier Score, Continuous Rank Probability Score) and consistent scoring functions (Root Mean Square Error and Mean Absolute Error addressing the predictive mean and median, respectively). Calibration is reached and the inclusion of neighbouring information slightly improves predictions. All specifications outperform a benchmark model with incorrelated effects, confirming the relevance of spatial correlation for modeling rainfall probability and accumulation.

Volunteer-based coral reef monitoring: reliability of data, environmental education and implications for conservation

Coral reefs are the most biodiverse ecosystems of the ocean and they provide notable ecosystem services. Nowadays, they are facing a number of local anthropogenic threats and environmental change is threatening their survivorship on a global scale. Large-scale monitoring is necessary to understand environmental changes and to perform useful conservation measurements. Governmental agencies are often underfunded and are not able of sustain the necessary spatial and temporal large-scale monitoring. To overcome the economic constrains, in some cases scientists can engage volunteers in environmental monitoring. Citizen Science enables the collection and analysis of scientific data at larger spatial and temporal scales than otherwise possible, addressing issues that are otherwise logistically or financially unfeasible. “STE: Scuba Tourism for the Environment” was a volunteer-based Red Sea coral reef biodiversity monitoring program. SCUBA divers and snorkelers were involved in the collection of data for 72 taxa, by completing survey questionnaires after their dives. In my thesis, I evaluated the reliability of the data collected by volunteers, comparing their questionnaires with those completed by professional scientists. Validation trials showed a sufficient level of reliability, indicating that non-specialists performed similarly to conservation volunteer divers on accurate transects. Using the data collected by volunteers, I developed a biodiversity index that revealed spatial trends across surveyed areas. The project results provided important feedbacks to the local authorities on the current health status of Red Sea coral reefs and on the effectiveness of the environmental management. I also analysed the spatial and temporal distribution of each surveyed taxa, identifying abundance trends related with anthropogenic impacts. Finally, I evaluated the effectiveness of the project to increase the environmental education of volunteers and showed that the participation in STEproject significantly increased both the knowledge on coral reef biology and ecology and the awareness of human behavioural impacts on the environment.

Spatial and temporal flower presentation in Apiaceae-Apioideae

Alle Doldengewächse (Apiaceae), darunter die größte, weltweit verbreitete Unterfamilie der Apioideen, weisen in ihren Blütenständen sehr einheitliche Merkmale auf. Die ‚Doppeldolden´ werden aus kleinen, weißen oder gelben Blüten gebildet und von vielen unspezialisierten Insekten besucht. Der uniforme Eindruck, der damit erweckt wird, ist unter Umständen ein Grund, dass die zugrundeliegende Morphologie bislang wenig untersucht wurde. Gegenstand der vorliegenden Dissertation ist es daher, die ‚verborgene Diversität´ im Blütenstandsbereich der Apiaceae -Apioideen mit dem Ziel darzustellen, den Einfluss der Architektur der Pflanzen auf die Art der Blütenpräsentation in Raum und Zeit und damit auf das Reproduktionssystem der Art zu ermitteln. Im ersten Kapitel zeigt der Vergleich von neun ausgewählten Arten, dass in den selbstfertilen und unspezifisch bestäubten Pflanzen durch Synchronisation und Rhythmik in der Präsentation von Blüten Fremdbefruchtung gefördert wird. Entweder durchlaufen die Pflanzen dabei nur eine getrennte männliche und weibliche Blühphase (Xanthoselinum alsaticum) oder der moduläre Bau der Pflanzen führt zu einer Folge männlicher und weiblicher Blühphasen (multizyklische Dichogamie). Die Diözie in Trinia glauca kann in diesem Zusammenhang als eine Trennung der Blühphasen auf verschiedengeschlechtliche Individuen gesehen werden. Für die andromonözischen Arten wird gezeigt, dass der Anteil funktional männlicher Blüten mit steigender Doldenordnung nicht einheitlich zu- oder abnimmt. Dadurch fungieren die Pflanzen zu verschiedenen Zeiten und mit unterschiedlicher Stärke eher als Pollenrezeptoren oder Pollendonatoren. Es wird deutlich, dass das ‚uniforme Muster‘ der Apioideen mit Dolden verschiedener Ordnungen, dichogamen Blüten und deren diversen Geschlechtsausbildungen ein komplexes Raum-Zeit-Gefüge zur Optimierung des Reproduktionssystems darstellt. Das zweite Kapitel stellt die Ergebnisse von Manipulationsexperimenten (Handbestäubung, Bestäuberabschirmung, Entfernen von Dolden niedriger Ordnung) an Chaerophyllum bulbosum dar, die zeigen, dass das Raum-Zeit-Gefüge in der Präsentation der Blüten der Art erlaubt, flexibel auf Umwelteinflüsse zu reagieren. Es stellt sich heraus, dass mechanische Beschädigungen kaum Einfluss auf den Andromonöziegrad und prozentualen Fruchtansatz der Individuen nehmen. Grundvoraussetzung der Reaktionsfähigkeit ist wiederum deren modulärer Bau. Dieser erlaubt es den Pflanzen, zusammen mit dem andromonöziebedingten Reservoir an - geschlechtlich flexiblen - männlichen Blüten, in den später angelegten Dolden fehlenden Fruchtansatz der Blüten früh blühender Dolden zu kompensieren. Im dritten Kapitel wird eine vergleichende Merkmalsanalyse an 255 Apioideen-Arten vorgelegt, die alle Verwandtschaftskreise, Wuchsformen und Verbreitungsgebiete der Gruppe repräsentieren. Ziel der Analyse war die Identifizierung von Merkmalssyndromen, die den Zusammenhang zwischen Architektur und Reproduktionssystem verdeutlichen sollten. Interessanterweise sind die einzigen Merkmale, die miteinander einhergehen, Protogynie und die graduelle Abnahme männlicher Blüten mit steigender Doldenordnung. Alle anderen Merkmale variieren unabhängig voneinander und erzeugen auf vielen verschiedenen Wegen immer wieder das gleiche Funktionsmuster, das als ‚breeding syndrome‘ der Apioideae gedeutet werden kann. Die Arbeit leistet einen wichtigen Beitrag zum Verständnis der Blütenstände der Apiaceen und darüber hinaus zu morphologischer Variation in ‚unspezialisierten‘ Reproduktionssystemen. Offensichtlich liegt in den Apioideen der Selektionsdruck auf der Aufrechterhaltung der generalisistischen Bestäubung und überprägt alle morphologisch-phylogenetischen Merkmalsvarianten.

Spatial and temporal characterisation of ground deformation recorded by geodetic techniques

A critical point in the analysis of ground displacements time series is the development of data driven methods that allow the different sources that generate the observed displacements to be discerned and characterised. A widely used multivariate statistical technique is the Principal Component Analysis (PCA), which allows reducing the dimensionality of the data space maintaining most of the variance of the dataset explained. Anyway, PCA does not perform well in finding the solution to the so-called Blind Source Separation (BSS) problem, i.e. in recovering and separating the original sources that generated the observed data. This is mainly due to the assumptions on which PCA relies: it looks for a new Euclidean space where the projected data are uncorrelated. The Independent Component Analysis (ICA) is a popular technique adopted to approach this problem. However, the independence condition is not easy to impose, and it is often necessary to introduce some approximations. To work around this problem, I use a variational bayesian ICA (vbICA) method, which models the probability density function (pdf) of each source signal using a mix of Gaussian distributions. This technique allows for more flexibility in the description of the pdf of the sources, giving a more reliable estimate of them. Here I present the application of the vbICA technique to GPS position time series. First, I use vbICA on synthetic data that simulate a seismic cycle (interseismic + coseismic + postseismic + seasonal + noise) and a volcanic source, and I study the ability of the algorithm to recover the original (known) sources of deformation. Secondly, I apply vbICA to different tectonically active scenarios, such as the 2009 L'Aquila (central Italy) earthquake, the 2012 Emilia (northern Italy) seismic sequence, and the 2006 Guerrero (Mexico) Slow Slip Event (SSE).

Mortality from road traffic accidents in Switzerland: longitudinal and spatial analyses

Road traffic accidents (RTA) are an important cause of premature death. We examined socio-demographic and geographical determinants of RTA mortality in Switzerland by linking 2000 census data to RTA mortality records 2000-2005 (ICD-10 codes V00-V99). Data from 5.5 million residents aged 18-94 years, 1744 study areas, and 1620 RTA deaths were analyzed, including 978 deaths (60.4%) in motor vehicle occupants, 254 (15.7%) in motorcyclists, 107 (6.6%) in cyclists, and 259 (16.0%) in pedestrians. Weibull survival models and Bayesian methods were used to calculate hazard ratios (HR), and standardized mortality ratios (SMR) across study areas. Adjusted HR comparing women with men ranged from 0.04 (95% CI 0.02-0.07) in motorcyclists to 0.43 (95% CI 0.32-0.56) in pedestrians. There was a u-shaped relationship with age in motor vehicle occupants and motorcyclists. In cyclists and pedestrians, mortality increased after age 55 years. Mortality was higher in individuals with primary education (HR 1.53; 95% CI 1.29-1.81), and higher in single (HR 1.24; 95% CI 1.05-1.46), widowed (HR 1.31; 95% CI 1.05-1.65) and divorced individuals (HR 1.62; 95% CI 1.33-1.97), compared to persons with tertiary education or married persons. The association with education was particularly strong for pedestrians (HR 1.87; 95% CI 1.20-2.91). RTA mortality increased with decreasing population density of study areas for motor vehicle occupants (test for trend p<0.0001) and motorcyclists (p=0.0021) but not for cyclists (p=0.39) or pedestrians (p=0.29). SMR standardized for socio-demographic and geographical variables ranged from 82 to 190. Prevention efforts should aim to reduce inequities across socio-demographic and educational groups, and across geographical areas, with interventions targeted at high-risk groups and areas, and different traffic users, including pedestrians.

Spatial and functional relationships between air conduits and blood capillaries in the pulmonary gas exchange tissue of adult and developing chickens

The documented data regarding the three-dimensional structure of the air capillaries (ACs), the ultimate sites of gas exchange in the avian lung is contradictory. Further, the mode of gas exchange, described as cross-current has not been clearly elucidated. We studied the temporal and spatial arrangement of the terminal air conduits of the chicken lung and their relationship with the blood capillaries (BCs) in embryos as well as the definitive architecture in adults. Several visualization techniques that included corrosion casting, light microscopy as well as scanning and transmission electron microscopy were used. Two to six infundibulae extend from each atrium and give rise to numerous ACs that spread centrifugally. Majority of the ACs are tubular structures that give off branches, which anastomose with their neighboring cognates. Some ACs have globular shapes and a few are blind-ending tapering tubes. During inauguration, the luminal aspects of the ACs are characterized by numerous microvillus-like microplicae, which are formed during the complex processes of cell attenuation and canalization of the ACs. The parabronchial exchange BCs, initially inaugurated as disorganized meshworks, are reoriented via pillar formation to lie predominantly orthogonal to the long axes of the ACs. The remodeling of the retiform meshworks by intussusceptive angiogenesis essentially accomplishes a cross-current system at the gas exchange interface in the adults, where BCs form ring-like patterns around the ACs, thus establishing a cross-current system. Our findings clarify the mode of gas exchange in the parabronchial mantle and illuminate the basis for the functional efficiency of the avian lung.

Socio-Spatial Relationships in Dairy Cows

Farm animals may serve as models for evaluating social networks in a controlled environment. We used an automated system to track, at fine temporal and spatial resolution (once per minute, +/- 50 cm) every individual in six herds of dairy cows (Bos taurus). We then analysed the data using social network analyses. Relationships were based on non-random attachment and avoidance relationships in respect to synchronous use and distances observed in three different functional areas (activity, feeding and lying). We found that neither synchrony nor distance between cows was strongly predictable among the three functional areas. The emerging social networks were tightly knit for attachment relationships and less dense for avoidance relationships. These networks loosened up from the feeding and lying area to the activity area, and were less dense for relationships based on synchronicity than on median distance with respect to node degree, relative size of the largest cluster, density and diameter of the network. In addition, synchronicity was higher in dyads of dairy cows that had grown up together and shared their last dry period. This last effect disappeared with increasing herd size. Dairy herds can be characterized by one strongly clustered network including most of the herd members with many non-random attachment and avoidance relationships. Closely synchronous dyads were composed of cows with more intense previous contact. The automatic tracking of a large number of individuals proved promising in acquiring the data necessary for tackling social network analyses.

Spatial assessment of carbon stocks of living vegetation at the national level in Lao PDR

The international mechanism for Reducing Greenhouse Gas Emissions from Deforestation and Forest Degradation (REDD) supposedly offers new opportunities for combining climate mitigation, conservation of the environment, and socio-economic development for development countries. In Laos REDD is abundantly promoted by the government and development agencies as a potential option for rural development. Yet, basic information for carbon management is missing: to date no knowledge is available at the national level on the quantities of carbon stored in the Lao landscapes. In this study we present an approach for spatial assessment of vegetation-based carbon stocks. We used Google Earth, Landsat and MODIS satellite imagery and refined the official national land cover data to assess carbon stocks. Our study showed that more than half (52%) of carbon stock of Laos is stored in natural forests, but that 70% of this stock is located outside of national protected areas. On the basis of two carbon-centered land use scenarios we calculated that between 30 and 40 million tons of carbon could be accumulated in shifting cultivation areas; this is less than 3% of the existing total stock. Our study suggests that the main focus of REDD in Laos should be on the conservation of existing carbon stocks, giving highest priority to the prevention of deforestation outside of national protected areas.

Debris-flow activity in abandoned channels of the Manival torrent reconstructed with LiDAR and tree-ring data

Hydrogeomorphic processes are a major threat in many parts of the Alps, where they periodically damage infrastructure, disrupt transportation corridors or even cause loss of life. Nonetheless, past torrential activity and the analysis of areas affected during particular events remain often imprecise. It was therefore the purpose of this study to reconstruct spatio-temporal patterns of past debris-flow activity in abandoned channels on the forested cone of the Manival torrent (Massif de la Chartreuse, French Prealps). A Light Detecting and Ranging (LiDAR) generated Digital Elevation Model (DEM) was used to identify five abandoned channels and related depositional forms (lobes, lateral levees) in the proximal alluvial fan of the torrent. A total of 156 Scots pine trees (Pinus sylvestris L.) with clear signs of debris flow events was analyzed and growth disturbances (GD) assessed, such as callus tissue, the onset of compression wood or abrupt growth suppression. In total, 375 GD were identified in the tree-ring samples, pointing to 13 debris-flow events for the period 1931–2008. While debris flows appear to be very common at Manival, they have only rarely propagated outside the main channel over the past 80 years. Furthermore, analysis of the spatial distribution of disturbed trees contributed to the identification of four patterns of debris-flow routing and led to the determination of three preferential breakout locations. Finally, the results of this study demonstrate that the temporal distribution of debris flows did not exhibit significant variations since the beginning of the 20th century.

INTEGRATION D’UN OBSERVATOIRE URBAIN SUR GOOGLE MAPS : Cas des infrastructures de la santé de la ville de Douala Cameroun

The spectacular advances computer science applied to geographic information systems (GIS) in recent times has favored the emergence of several technological solutions. These developments have given rise to enormous opportunities for digital management of the territory. Among the technological solutions, the most famous Google Maps offers free online mapping dynamic exhaustive of the Maps. In addition to meet the enormous needs of urban indicators geotagged information, we did work on this project “Integration of an urban observatory on Google Maps.” The problem of geolocation in the urban observatory is particularly relevant in the sense that there is currently no data (descriptive and geographical) reliable on the urban sector; we must stick to extrapolate from data old and obsolete. This helps to curb the effectiveness of urban management to make difficult investment programming and to prevent the acquisition of knowledge to make cities engines of growth. The use of a geolocation tool coupled to the data would allow better monitoring of indicators Our project's objective is to develop an interactive map server (WebMapping) which map layer is formed from the resources of the Google Maps servers and match information from the field to produce maps of urban equipment and infrastructure of a city data to the client's request To achieve this goal, we will participate in a study of a GPS location of strategic sites in our core sector (health facilities), on the other hand, using information from the field, we will build a postgresql database that will link the information from the field to map from Google Maps via KML scripts and PHP appropriate. We will limit ourselves in our work to the city of Douala Cameroon with the sectors of health facilities with the possibility of extension to other areas and other cities. Keywords: Geographic Information System (GIS), Thematic Mapping, Web Mapping, data mining, Google API.

Genomic Data Reveal a Complex Making of Humans

In the last few years, two paradigms underlying human evolution have crumbled. Modern humans have not totally replaced previous hominins without any admixture, and the expected signatures of adaptations to new environments are surprisingly lacking at the genomic level. Here we review current evidence about archaic admixture and lack of strong selective sweeps in humans. We underline the need to properly model differential admixture in various populations to correctly reconstruct past demography. We also stress the importance of taking into account the spatial dimension of human evolution, which proceeded by a series of range expansions that could have promoted both the introgression of archaic genes and background selection.