Losartan potassium dissolution test for drug release evaluation in pharmaceutical capsules using HPLC and UV spectrophotometry

This work describes the development and validation of a dissolution test for 50 mg losartan potassium capsules using HPLC and UV spectrophotometry. A 2(4) full factorial design was carried out to optimize dissolution conditions and potassium phosphate buffer, pH 6.8 as dissolution medium, basket as apparatus at the stirring speed of 50 rpm and time of 30 min were considered adequate. Both dissolution procedure and analytical methods were validated and a statistical analysis showed that there are no significant differences between HPLC and spectrophotometry. Since there is no official monograph, this dissolution test could be applied for quality control routine.

Development of new dissolution test and HPLC-RP method for anti-parasitic ornidazole coated tablets

This work aimed the development and validation of a new dissolution test for ornidazole coated tablets. The dissolution conditions were determined after testing Sink conditions, dissolution medium, apparatus, stirring speed, 24 h stability and medium filtration influence. The best conditions were paddle at a stirring speed of 75 rpm and 900 mL of 0.1 M HCl. A new HPLC quantification method was developed and validated. The dissolution test and quantification method showed to be adequate for their purposes and could be applied for quality control of ornidazole coated tablets, since there is no official monograph.

Development and validation of a dissolution test with reversed-phase liquid chromatography analysis for rupatadine in tablet dosage forms

A dissolution test for in vitro evaluation of tablet dosage forms containing 10 mg of rupatadine was developed and validated by RP-LC. A discriminatory dissolution method was established using apparatus paddle at a stirring rate of 50 rpm with 900 mL of deaerated 0.01 M hydrochloric acid. The proposed method was validated yielding acceptable results for the parameters evaluated, and was applied for the quality control analysis of rupatadine tablets, and to evaluate the formulation during an accelerated stability study. Moreover, quantitative analyses were also performed, to compare the applicability of the RP-LC and the LC-MS/MS methods.

Terbinafine: optimization of a LC method for quantitative analysis in pharmaceutical formulations and its application for a tablet dissolution test

A simple liquid chromatographic method was optimized for the quantitative determination of terbinafine in pharmaceutical hydroalcoholic solutions and tablets, and was also employed for a tablet dissolution test. The analysis was carried out using a RP-C18 (250 mm × 4.6 mm, 5 μm) Vertical® column, UV-Vis detection at 254 nm, and a methanol-water (95:5, v/v) mobile phase at a flow-rate of 1.2 mL min-1. Method validation investigated parameters such as linearity, precision, accuracy, robustness and specificity, which gave results within the acceptable range. The tablets dissolution was quite fast: 80% of the drug was dissolved within 15 min.

Development and validation of a dissolution test for diltiazem hydrochloride in immediate release capsules

This work describes the development and validation of a dissolution test for 60 mg of diltiazem hydrochloride in immediate release capsules. The best dissolution in vitro profile was achieved using potassium phosphate buffer at pH 6.8 as the dissolution medium and paddle as the apparatus at 50 rpm. The drug concentrations in the dissolution media were determined by UV spectrophotometry and HPLC and a statistical analysis revealed that there were significant differences between HPLC and spectrophotometry. This study illustrates the importance of an official method for the dissolution test, since there is no official monograph for diltiazem hydrochloride in capsules.

Development and validation of a dissolution test for primaquine/polyethylene oxide matrix tablets

A simple, precise, specific, repeatable and discriminating dissolution test for primaquine (PQ) matrix tablets was developed and validated according to ICH and FDA guidelines. Two UV assaying methods were validated for determination of PQ released in 0.1 M hydrochloric acid and water media. Both methods were linear (R²>0.999), precise (R.S.D.<1.87%) and accurate (97.65-99.97%). Dissolution efficiency (69-88%) and equivalence of formulations (f2) was assessed in different media and apparatuses (basket/100 rpm and paddle/50 rpm) tested. Discriminating condition was 900 mL aqueous medium, basket at 100 rpm and sampling times at 1, 4 and 8 h. Repeatability (R.S.D.<2.71%) and intermediate precision (R.S.D.<2.06%) of dissolution method were satisfactory.

Propuesta de un test para determinar el conocimiento conceptual de estudiantes universitarios sobre la constante de equilibrio químico y su aplicación en estudiantes españoles

This article outlines a procedure that was used to develop a written test for evaluating the conceptual knowledge of chemical equilibrium constant among university students. The concepts in the subject matter were carefully defined through propositional statements. Students' understanding of the topic was determined through interviews. These data were used to produce nine multiple choice questions. Each question was designed to identify misconceptions related to the chemical equilibrium constant. The test was evaluated by foure associate professors and was administred to a total of 196 spanish university students. This test has a Cronbach's alpha reliability of 0.63 and its content validity values ranged from 3.7 to 5.

Analysis of the nucleotide sequence of the coat protein and 3'-untranslated region of two Brazilian Potato virus Y isolates

Two Brazilian Potato virus Y (PVY) isolates were biologically characterized as necrotic (PVY-NBR) and common (PVY-OBR) based upon symptoms on test plants. Additional characterization was performed by sequencing a cDNA corresponding to the 3' terminal region of the viral genome. The sequence consisted of 195 nucleotides (nt) coding part of the nuclear inclusion body b (NIb) gene, 804 nt of the coat protein (CP) gene, and 328 nt (PVY-OBR) or 326 nt (PVY-NBR) of the 3'-untranslated region (UTR). Translation of the sequence resulted in one single open reading frame with part of the NIb and a CP of 267 amino acids. The two isolates shared 95.1% similarity in the CP amino acid sequence. The CP and the 3'-UTR sequence of the Brazilian isolates were compared to those of other PVY isolates previously reported and unrooted phylogenetic trees were constructed. The trees revealed a separation of two distinct clusters, one comprising most of the common strains and the other comprising the necrotic strains. PVY-OBR was clustered in the common group and PVY-NBR in the necrotic one.

Luottamuksen ilmeneminen alueellisissa yhteistyöverkostoissa

Appearance of trust in regional, co-operative networks In our times, the value of social networks has been widely acknowledged. One can say that it is important for private persons to get networked, whilst it is even a must for companies and organizations in business life. This doctor's thesis examines three co-operative regional networks. Networks are located in Western Uusimaa (Länsi-Uusimaa) region in southernmost Finland, and they had both public organizations and private companies as participants (later called ‘players’). Initially, all of them were co-financed from public funds, and two of them are still operational while writing this. The main target of these networks has been to act as learning networks. The learning network stands for an ensemble of research and development units and workplaces constituting a common forum for learning. The main focus in this study has been on qualitative and structural characteristics of the networks, and how they are relating with intrinsic trust. In addition to the development of trust, it has been studied, at what level organizational learning within the networks takes place, and lastly, what kind of factors facilitate the development of social capital. The theoretical framework for the study is built on analysing trust and social capital. It is a 'mission impossible' to find single definitions for such major concepts. In this study, from the research questions' point of view it has been more relevant to concentrate on the aspects of networking and the relationships between the participating organizations. The total view in this study is very network-centric, and therefore those theories which have similar point of view have been prioritized. Such is the theory about structural holes by Ronald S. Burt (1992). It has been widely applied; especially his views on constraints affecting players in networks. The purpose of this study has not been to create new theories or to analyse and compare thoroughly the existing theoretical trends. Instead, the existing theories have provided the study with conceptual tools, which have been utilized for supporting the empirical results. The aim has been to create an explanatory case study consisting relevant discussion on the relationship between the network characteristics and the appearance of trust. The conceptual categorization for confidence vs. trust created by Niklas Luhmann (1979) is another important theoretical building block. In most cases, co-operation in networks is initiated by people already trusting in each other and willing to work together. However, personal trust is not sufficient in the long run to sustain the co-operation within the network: more abstract systemic trust described by Luhmann must also emerge. In the networks with different structures and at different development phases, these forms of trust appear at different levels. In this study, Luhmann’s systemic trust as a term has been replaced by the concept of 'trust in network as a system'. Structural characteristics of a network (density, centrality, structural holes etc.) have been selected to explain the creation of social capital and trust. The ability to adapt new information is essential for the development of social capital. Qualitative analysis for development phase has been used, and the Learning Network Maturity Test by Leenamaija Otala (2000) and her work have been applied. Thus, the qualitative characteristics and the structural characteristics of the networks are utilized together, when the creation of social capital and appearance of trust are assessed. Social Network Analysis, questionnaires and interviews have been the research methods. Quantitative and qualitative data have been combined. There is a similarity in viewpoints to research data with Extensive Case Study method, in which different cases are searched by exploring various cases and comparing certain common features between them and generic models. Development of trust, social capital and organizational learning has been explained in the study by comparing the networks in hand. Being a case study, it doesn't have targets to provide with general results and findings like conventional surveys. However, in this work phenomena and mechanisms related to them are interpreted from the empirical data. Key finding of this study is that the networks with high structural equality and clear target setting enable building trust to the network as a system. When systemic trust is present, e.g. changes in personnel involved in the co-operation won't hinder the network from remaining operational. On the other hand, if the players are not well motivated to co-operate, if the network is extremely centralized structurally, or if the network has players holding very much more beneficial position compared to the others, systemic trust won't develop: trust tends to remain at the personal level, and is directed to some players only. Such networks won't generate results and benefits to its players, and most probably they won’t live very long. In other words, learning networks cannot solely be based on willingness to learn, but also on willingness to co-operate.

Study of ligand-based virtual screening tools in computer-aided drug design

Virtual screening is a central technique in drug discovery today. Millions of molecules can be tested in silico with the aim to only select the most promising and test them experimentally. The topic of this thesis is ligand-based virtual screening tools which take existing active molecules as starting point for finding new drug candidates. One goal of this thesis was to build a model that gives the probability that two molecules are biologically similar as function of one or more chemical similarity scores. Another important goal was to evaluate how well different ligand-based virtual screening tools are able to distinguish active molecules from inactives. One more criterion set for the virtual screening tools was their applicability in scaffold-hopping, i.e. finding new active chemotypes. In the first part of the work, a link was defined between the abstract chemical similarity score given by a screening tool and the probability that the two molecules are biologically similar. These results help to decide objectively which virtual screening hits to test experimentally. The work also resulted in a new type of data fusion method when using two or more tools. In the second part, five ligand-based virtual screening tools were evaluated and their performance was found to be generally poor. Three reasons for this were proposed: false negatives in the benchmark sets, active molecules that do not share the binding mode, and activity cliffs. In the third part of the study, a novel visualization and quantification method is presented for evaluation of the scaffold-hopping ability of virtual screening tools.

Virulence and rep-PCR analysis of Pyricularia grisea isolates from two Brazilian upland rice cultivars

The phenotypic and genetic diversity of 77 isolates of Pyricularia grisea collected from two upland rice cultivars, Maravilha and Primavera, was studied. Isolates exhibiting compatible reaction to cv.Primavera were incompatible to cv.Maravilha and vice versa, with the exception of six isolates that were compatible to both cultivars. The virulence of isolates from cv. Maravilha on 32 test genotypes of rice was significantly higher (t = 9.09, p < 0.0001) than the isolates from cv.Primavera. A phenogram constructed from virulence data showed two main groups, one constituted mainly of isolates from cv.Primavera (97.6%) and the other of isolates from cv.Maravilha (91.17%). Rep-PCR analysis of isolates using two primers designed from sequences of Pot2 showed that isolates could be clustered broadly into two groups. The average similarity within a cluster of isolates from cv.Primavera was significantly greater than the average similarity among the isolates of cv.Maravilha (t = 5.37, p < 0.0001). There was close correspondence between clusters based on PCR and virulence data (r = 0.48, p < 0.011). The results showed that isolates of P. grisea were cultivar specific and had low phenotypic and genetic diversity.

Test automation scheme for LTE core network element

Modern sophisticated telecommunication devices require even more and more comprehensive testing to ensure quality. The test case amount to ensure well enough coverage of testing has increased rapidly and this increased demand cannot be fulfilled anymore only by using manual testing. Also new agile development models require execution of all test cases with every iteration. This has lead manufactures to use test automation more than ever to achieve adequate testing coverage and quality. This thesis is separated into three parts. Evolution of cellular networks is presented at the beginning of the first part. Also software testing, test automation and the influence of development model for testing are examined in the first part. The second part describes a process which was used to implement test automation scheme for functional testing of LTE core network MME element. In implementation of the test automation scheme agile development models and Robot Framework test automation tool were used. In the third part two alternative models are presented for integrating this test automation scheme as part of a continuous integration process. As a result, the test automation scheme for functional testing was implemented. Almost all new functional level testing test cases can now be automated with this scheme. In addition, two models for integrating this scheme to be part of a wider continuous integration pipe were introduced. Also shift from usage of a traditional waterfall model to a new agile development based model in testing stated to be successful.