Os desafios à implantação do modelo de gestão dos recursos hídricos estabelecidos pela lei 9.4333

This article objectified to identify the main challenges to the implementation of the system of management of the water features established by Law 9.433/97, in special the restrictive factors to the installation of Committees of Basin and Hidric Resources Agencies and the challenges to the implementation and management of the basin plans, of the charge and the grant for the hydric resources uses. The analysis is based in the South Paraiba river case, beyond the experience in other countries. The reflections on the gotten information had led to the conclusion of that the magnifying and change of the institucional base of decision, the integration of the entities of water features, the institucional qualification and technique, the social mobilization, the decentralization of the financial features, the integration of the management in frontier basins and the implementation of management systems based in the consensus are the biggest challenges to the execulte of the federal law.

Águas: campo organizacional poder e sistema de informações. O CEIVAP como protótipo da gestão de recursos hídricos no Brasil

O modelo descentralizado, participativo e integrado de gestão de recursos hídricos que se ordena em função das bacias hidrográficas demanda um grande esforço de todos os atores envolvidos na gestão. Para compreendê-lo é essencial considerar os antecedentes históricos, os marcos legais, o arcabouço jurídico e o ferramental tecnológico moderno (sistemas de informações) que definem a representação das esferas governamentais, dos usuários de grande porte e da sociedade civil na gestão. Utilizando a teoria institucional, o conceito de campo organizacional e a tecnologia da informação, considerando sempre o poder como variável central da disputas sociais, este trabalho buscou, interpretando os discursos das entrevistas em profundidade e usando a literatura disponível, a descrição do desenvolvimento e da formação do campo formado em função do tema da gestão das águas. A escolha da teoria institucional permite obter uma visão mais abrangente do estudo das organizações, incorporando temas como valores e legitimação como elementos de sucesso das organizações em um campo. o trabalho conclui que há um campo organizacional da gestão de recursos hídricos nos moldes proposto pela teoria utilizada. Neste campo há questões centrais que dirigem a geração de valores. Este campo se completa com atores periféricos, representantes de discursos ainda não plenamente incorporados, mas que já demandam resposta dos atores centrais. A tecnologia, através dos sistemas de informações, ainda não contribui para qualquer alteração significativa na distribuição de poder no campo.

Entry strategies on an emerging market: Brazil: case studies of French cosmetics companies in Brazil

Este trabalho envolve as estrategias de entrada sobre um mercado emergente, o mercado brasileiro. Os estudos de casos que apoiam o assunto são de empresas francesas do setor de cosméticos. Uma revisão da literatura sobre o assunto sera comparada com os resultados dos estudos de caso. Isso para conduzir numa observação do estado atual das caractéristicos de instalação no mercado brasileiro deste setor para empresas estrangeiras de tamanho médio. O estudo da literatura que já existe sobre o assunto se concentra sobre varias problemáticas conectadas com a problemática geral: as razões para internacionalizar, o modo de entrada, os obstáculos encontrados, as estrategias especificais e as adaptações do marketing mix. Depois este trabalho se concentra sobre tres empresas francesas representativas das problematicas atuais do setor : Norlessi, LaboBio e Plains Cosmetics. Os estudos de caso são sustentados por entrevistas e coleção de dados de varios origens, descrevedo mas precisamente na parte de methodologia. Depois será feito uma cross-analysis tentando comparar as conclusões do estudo empirico e do estudo literário. As conclusões finais tem como objetivo de ser uma observação objetiva do raciocinio das empresas consideradas sobre as problemáticas escolhidas.

Estado e participação pública em questões ambientais urbanas

Nessa tese relaciona-se a problemática ambiental com a problemática social tal como esta se apresenta em áreas urbanas de sociedades do Sul, particularmente no Brasil. Faz-se um esforço de não confundí-las, apontando suas especificidades e as possibilidades, que a primeira traduz, no sentido de repensar, em termos teóricos, o planejamento e a gestão das cidades. Discute-se o papel do Estado capitalista nessas sociedades, enquanto mediador de conflitos sociais resultantes de políticas públicas excludentes. Discute-se ainda o significado, limites e possibilidades da participação pública na definição e/ou implementação de tais políticas e o papel que a educação ambiental pode assumir neste sentido. Apresenta-se dois estudos de caso tratando da degradação ambiental de bacias hidrográficas localizadas na Região Metropolitana de São Paulo, nos quais a participação pública tem se dado em algum nível, contribuindo para a tomada de decisões. Num caso, esta se dá numa conjuntura política onde as decisões tecnocráticas são determinantes; em outro, está relacionada com a tentativa, por parte do Estado, de implantação de uma gestão mais democrática, que implica no diálogo deste com as organizações civis visando a realização de negociações.

Produtividade às custas de assédio moral: a indústria bancária sob a ótica dos trabalhadores do setor

Esta pesquisa avaliou o fenômeno assédio moral no Banco Credit S.A., considerando de que maneira esta prática se revela no ambiente de trabalho, seus efeitos físicos e psicológicos e, por fim, a repercussão psicossocial do assédio moral no ambiente organizacional dessa empresa; acrescentando que a nomenclatura dada a este Banco é fictícia, uma vez que não obtivemos autorização formal desta instituição apontada como objeto de estudo da pesquisa. As conclusões são baseadas numa pesquisa etnográfica qualitativa através de entrevistas semi-estruturadas, com relatos de 10 (dez) respondentes, empregados do Banco Credit S.A., acerca do fenômeno assédio moral. Como forma de validação dos dados captados foi aplicada uma pesquisa etnográfica virtual, de cunho quantitativo a 103 (cento e três) respondentes, todos empregados dessa instituição, através do survey. Por fim, foi realizada uma entrevista com o Presidente do BancáRio - Sindicato dos Bancários do Rio de Janeiro, ator social apto a descrever o fenômeno assédio moral no setor bancário holisticamente, ajuizando assim, as análises relativas ao perfil do Banco Credit S.A., sobretudo àquelas semelhantes ou divergentes do senso comum. Os tópicos da discussão estão circunscritos a partir dos anos 80-90 quando se dá a estabilização da economia brasileira, através da implantação do plano real, no governo FHC. Nesse contexto, o setor bancário passou por um processo de reestruturação produtiva, marcado pelas privatizações e a adoção de novas formas de gestão que resultaram em conflitos no ambiente de trabalho. Essas modificações levaram a uma ruptura nos processos das transaçoes bancárias, reconfigurando o setor, se estabelendo de forma cristalizada admitindo assim, o assédio moral como uma pratica corriqueira e institucionalizada. Esta pesquisa conclui que, diante deste cenário o assédio moral revelou-se um fenômeno corriqueiro que foi incorporado à cultura organizacional desta empresa como mecanismo de punição aos empregados que não atingem as metas estabelecidas. O clima organizacional do Banco Credit S.A. é tenso e propício as práticas de assédio moral; que esse fenômeno reduz a capacidade produtiva do empregado, induzindo ao aumento de custos com improdutividade e baixa eficiência para o próprio banco. O assédio moral, nas relações entre os empregados do banco Credit S.A. se revela mais comumente de forma vertical descendente, sua prática é fortemente percebida pelos empregados desta instituição.

O Acordo Antecipado de Preços – APA como solução para reduzir a insegurança jurídica na aplicação das regras de Preço de Transferência no Brasil

O presente trabalho monográfico é baseado fundamentalmente na comparação da legislação estrangeira e nos potenciais conflitos trazido pela doutrina brasileira na instituição de outros mecanismos de solução de controvérsias administrativos, já em operação no Brasil. Objetivando verificar a possibilidade de aplicação do Acordo Antecipado de Preços no direito brasileiro. Para tanto é verificado se o APA é uma forma eficiente de solução das inseguranças trazidas pela aplicabilidade das regras de preços de transferência em virtude da natureza específica das transações operacionalizadas entre pessoas vinculadas.

Diversidade Ictiofaunística e Ecologia reprodutiva de uma espécie nativa de peixe da Bacia Piranhas-Assu, RN

The Caatinga biome is rich in endemic fish species fauna. The present study the results of fish faunal surveys conducted in the hydrographic basin of Piranhas-Assu of the Brazilian Caatinga biome. The fish samples collected were distributed in four orders (Characiformes, Perciformes, Siluriformes and Synbranchiformes), 11 families (Characidae, Curimatidae, Auchenipteridae, Anostomidae, Prochilodontidae, Erythrinidae, Cichlidae, Sciaenidae, Heptapteridae, Loricariidae, Synbranchidae) and 22 species, of which 17 are endemic and five have been introduced from other basins. The order Characiformes was the most representative in number of species (46,35% ) followed by Perciformes (35,38%), Siluriformes (17,44%) and Synbranchiformes (0,5%). The Nile tilapia, Oreochomis niloticus, the only exotic species, was most expressive in number of individuals (24.92%) followed by the native species piau preto, Leporinus piau (18,77 %). Considering the relative frequency of occurrence of the 22 species, 13 were constant, five were accessory and four were occasional. This study investigated the reproductive ecology of an endemic fish black piau, Leporinus piau from the Marechal Dutra reservoir, Acari, Rio Grande do Norte. Samplings were done on a monthly basis from January to December 2009, and a total of 211 specimens were captured. The environmental parameters such as rainfall, temperature, pH, electrical conductivity and dissolved oxygen of water were recorded. The sampled population showed a slight predominance of males (55%), however females were larger and heavier. Both sexes of L. piau showed positive allometric growth, indicating a higher increase of weight than length. The first sexual maturation of males occurred at smaller size, with 16.5 cm in total length than females (20.5 cm). During the reproductive period, the condition factor and gonadosomatic index (GSI) of L. piau were negatively correlated. This species has large oocytes with a high mean fecundity of 54.966 with synchronous oocyte development and total spawning

Avaliação da influência do nacl em pastas de cimento portland para cimentação de poços de petróleo em zonas evaporíticas

One of the major current challenges for oilwell companies is the extraction of oil from evaporitic zones, also known as pre-salt basins. Deep reservoirs are found under thick salt layers formed from the evaporation of sea water. Salt layers seal the flow of oil from underneath rock formations, which store hydrocarbons and increase the probability of success in oil and gas exploration. Oilwells are cemented using Portland-based slurries to promote mechanical stability and zonal isolation. For pre-salt oilwells, NaCl must be added to saturate the cement slurries, however, the presence of salt in the composition of slurries affects their overall behavior. Therefore, the objective of the present study was to evaluate the effect of the addition of 5 to 25% NaCl on selected properties of Portland-based slurries. A series of tests were carried out to assess the rheological behavior, thickening time, free water and ultrassonic compressive strength. In addition, the slurries were also characterized by thermal analysis, X ray diffraction and scanning electron microscopy. The results showed that the addition of NaCl affected the thickening time of the slurries. NaCl contents up to 10% shortened the thickening time of the slurries. On the other hand, concentrations in excess of 20% not only extended the thickening time, but also reduced the strength of hardened slurries. The addition of NaCl resulted in the formation of a different crystalline phase called Friedel´s salt, where free chlorine is bonded to tricalcium aluminate

Influência da adição do NaCl e KCl em sistemas de pastas contendo sílica para poços de petróleo em zonas evaporíticas e carbonáticas

One of the major challenges faced nowadays by oil companies is the exploration of pre-salt basins. Thick salt layers were formed in remote ages as a consequence of the evaporation of sea water containing high concentrations of NaCl and KCl. Deep reservoirs can be found below salt formations that prevent the outflow of oil, thus improving the success in oil prospection. The slurries used in the cement operations of salt layers must be adequate to the properties of those specific formations. At the same time, their resulting properties are highly affected by the contamination of salt in the fresh state. It is t herefore important to address the effects of the presence of salt in the cement slurries in order to assure that the well sheath is able to fulfill its main role to provide zonal isolation and mechanical stability. In this scenario, the objective of the present thesis work was to evaluate the effect of the presence of NaCl and KCl premixed with cement and 40% silica flour on the behavior of cement slurries. Their effect in the presence of CO2 was also investigated. The rheological behavior of slurries containing NaCl and KCl was evaluated along with their mechanical strength. Thermal and microstructural tests were also carried out. The results revealed that the presence of NaCl and KCl affected the pozzolanic activity of silica flour, reducing the strength of the hardened slurries containing salt. Friedel´s salt was formed as a result of the bonding between free Cl- and tricalcium aluminate. The presence of CO2 also contributed to the degradation of the slurries as a result of a process of carbonation/bicarbonataion

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Aplicação de termogravimetria acoplada à espectrometria de massas para caracterização de petróleo e determinação da curva de evolução de gás sulfídrico

With the new discoveries of oil and gas, the exploration of fields in various geological basins, imports of other oils and the development of alternative fuels, more and more research labs have evaluated and characterized new types of petroleum and derivatives. Therefore the investment in new techniques and equipment in the samples analysis to determine their physical and chemical properties, their composition, possible contaminants, especification of products, among others, have multiplied in last years, so development of techniques for rapid and efficient characterization is extremely important for a better economic recovery of oil. Based on this context, this work has two main objectives. The first one is to characterize the oil by thermogravimetry coupled with mass spectrometry (TG-MS), and correlate these results with from other types of characterizations data previously informed. The second is to use the technique to develop a methodology to obtain the curve of evaluation of hydrogen sulfide gas in oil. Thus, four samples were analyzed by TG-MS, and X-ray fluorescence spectrometry (XRF). TG results can be used to indicate the nature of oil, its tendency in coke formation, temperatures of distillation and cracking, and other features. It was observed in MS evaluations the behavior of oil main compounds with temperature, the points where the volatilized certain fractions and the evaluation gas analysis of sulfide hydrogen that is compared with the evaluation curve obtained by Petrobras with another methodology

Estudo paramétrico da injeção de vapor em reservatórios delgados

Exploration of heavy oil reservoirs is increasing every year in worldwide, because the discovery of light oil reservoirs is becoming increasingly rare. This fact has stimulated the research with the purpose of becoming viable, technically and economically, the exploration of such oil reserves. In Brazil, in special in the Northeast region, there is a large amount of heavy oil reservoir, where the recovery by the so called secondary methods Water injection or gas injection is inefficient or even impracticable in some reservoirs with high viscosity oils (heavy oils). In this scenario, steam injection appears as an interesting alternative for recover of these kinds of oil reservoirs. Its main mechanism consists of oil viscosity reduction through steam injection, increasing reservoir temperature. This work presents a parametric simulation study of some operational and reservoir variables that had influence on oil recovery in thin reservoirs typically found in Brazilian Northeast Basins, that use the steam injection as improved oil recovery method. To carry out simulations, it was used the commercial software STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modeling Group) version 2007.11. Reservoirs variables studied were horizontal permeability, vertical and horizontal permeability ratio, water zone and pay zone thickness ratio, pay zone thickness and thermal conductivity of the rock. Whereas, operational parameters studied were distance between wells and steam injection rate. Results showed that reservoir variables that had more influence on oil recovery were horizontal permeability and water zone and pay zone thickness ratio. In relation to operational variables, results showed that short distances between wells and low steam injection rates improved oil recovery

Estudo paramétrico da recuperação de petróleo pesado por aquecimento eletromagnético resistivo

Electrical resistive heating (ERH) is a thermal method used to improve oil recovery. It can increase oil rate and oil recovery due to temperature increase caused by electrical current passage through oil zone. ERH has some advantage compared with well-known thermal methods such as continuous steam flood, presenting low-water production. This method can be applied to reservoirs with different characteristics and initial reservoir conditions. Commercial software was used to test several cases using a semi-synthetic homogeneous reservoir with some characteristics as found in northeast Brazilian basins. It was realized a sensitivity analysis of some reservoir parameters, such as: oil zone, aquifer presence, gas cap presence and oil saturation on oil recovery and energy consumption. Then it was tested several cases studying the electrical variables considered more important in the process, such as: voltage, electrical configurations and electrodes positions. Energy optimization by electrodes voltage levels changes and electrical settings modify the intensity and the electrical current distribution in oil zone and, consequently, their influences in reservoir temperature reached at some regions. Results show which reservoir parameters were significant in order to improve oil recovery and energy requirement in for each reservoir. Most significant parameters on oil recovery and electrical energy delivered were oil thickness, presence of aquifer, presence of gas cap, voltage, electrical configuration and electrodes positions. Factors such as: connate water, water salinity and relative permeability to water at irreducible oil saturation had low influence on oil recovery but had some influence in energy requirements. It was possible to optimize energy consumption and oil recovery by electrical variables. Energy requirements can decrease by changing electrodes voltages during the process. This application can be extended to heavy oil reservoirs of high depth, such as offshore fields, where nowadays it is not applicable any conventional thermal process such as steam flooding