A Review on the Challenges for Increased Production of Castor

Castor (Ricinus communis L.) is one of the oldest cultivated crops, but currently it represents only 0.15% of the vegetable oil produced in the world. Castor oil is of continuing importance to the global specialty chemical industry because it is the only commercial source of a hydroxylated fatty acid. Castor also has tremendous future potential as an industrial oilseed crop because of its high seed oil content (more than 480 g kg(-1)), unique fatty acid composition (900 g kg(-1) of ricinoleic acid), potentially high oil yields (1250-2500 L ha(-1)), and ability to be grown under drought and saline conditions. The scientific literature on castor has been generated by a relatively small global community of researchers over the past century. Much of this work was published in dozens of languages in journals that are not easily accessible to the scientific community. This review was conducted to provide a compilation of the most relevant historic research information and define the tremendous future potential of castor. The article was prepared by a group of 22 scientists from 16 institutions and eight countries. Topics discussed in this review include: (i) germplasm, genetics, breeding, biotic stresses, genome sequencing, and biotechnology; (ii) agronomic production practices, diseases, and abiotic stresses; (iii) management and reduction of toxins for the use of castor meal as both an animal feed and an organic fertilizer; (iv) future industrial uses of castor including renewable fuels; (v) world production, consumption, and prices; and (vi) potential and challenges for increased castor production.

Production of a new generation of leptons in hadronic collisions

The contribution is studied of vector boson fusion processes to the production of a heavy charged lepton accompanied by its neutral partner at multi-TeV hadronic colliders. It is shown that vector boson fusion dominates over the usual quark-antiquark fusion mechanism for a very heavy lepton and high energies. © 1986.

Characterization of a monoclonal antibody recognizing mast cells

Immunohistochemical screening for monoclonal antibodies prepared by immunization of mice with a rat osteoblastic cell population led to identification of one antibody that reacted against a small population of cells present in the soft connective tissue compartment of 21 days fetal rat calvaria. The morphology of the cells and the immunohistochemical staining characteristics (a distinct intracellular granular pattern) suggested that the antibody might be reacting specifically against mast cells. We used combined histochemistry and immunohistochemistry to further characterize this antibody, designated RCJ102. Cryosections containing calvaria bone, soft connective tissues and skin were prepared from the top of the head of 21 days fetal rats, and from adult rats cryosections of lung, muscle, adipose tissue and small intestine were prepared. Some sections were labelled by indirect immunofluorescence with RCJ102; corresponding sections were labelled histochemically with toluidine blue. There was a direct correspondence between mast cells identified histochemically and cells labelling with RCJ102 in all tissues except intestine, in which the mast cell detectable by histochemistry were not labelled by RCJ102. These results suggest that the RCJ102 antibody will be a valuable new reagent for further elucidation of the heterogeneity described between connective tissue and intestinal mucosal mast cells.

Signal and backgrounds for the single production of scalar and vector leptoquarks at the CERN LHC

We perform a detailed analysis of the potentiality of the CERN Large Hadron Collider to study the single production of leptoquarks via pp→e±q→ leptoquark →e± q, with e± generated by the splitting of photons radiated by the protons. Working with the most general SU(2)L⊗U( 1 )Y invariant effective Lagrangian for scalar and vector leptoquarks, we analyze in detail the leptoquark signals and backgrounds that lead to a final state containing an e± and a hard jet with approximately balanced transverse momenta. Our results indicate that the LHC will be able to discover leptoquarks with masses up to 2-3 TeV, depending on their type, for Yukawa couplings of the order of the electromagnetic one.

Thermal behaviour and analytical study of the production of TiSnOx from the mixed 8-hydroxyquinolinates

Solubility and pH precipitation studies were carried out to obtain the binuclear complex {[TiO(C9H6NO)2][Sn(C9H6NO) 2]} involving 8-hydroxyquinoline as chelating agent. The compound, the individual mononuclear complexes and their physical mixture were evaluated by means of techniques such as TG, DTA, elemental analysis, X-ray diffraction, IR spectroscopy. The properties of the original compounds and also the thermoanalytical conditions exerted a great influence on the degree of crystallinity and on the crystalline phase of the mixed oxide obtained as final product of the thermal decomposition.

Seed production of species belonging to the palm collection of the FCAV-UNESP, Jaboticabal, state of Sao Paulo, Brazil

The seed production of fully developed specimens belonging to the palm collection of the Experimental Nursery of the FCAV-UNESP was observed. This paper gives information useful for nursery growers: average fruit weight, seed germination, procedures for sowing, time of fruit harvest and possibility of seed storage. At the nursery, the time until the first seedling emerged has varied, according to the species, from one to more than ten months. For better germination, fruits must be collected when completely mature; the fleshy mesocarp must be removed before sowing. Seed storage for a few months has been possible for some species, by removing the fleshy mesocarp, drying the seeds in shade, treating them with a fungicide, packing them in plastic bags and maintaining the seed lots at 20°C. These results agree with reports about some other species and general recommendations of the related literature.

Single production of leptoquarks at the Fermilab Tevatron

We study single production of first generation leptoquarks in association with e± at the Fermilab Tevatron. We focus our attention on final states exhibiting an e+e- pair and jets, and perform a detailed analysis of the signal and background. The single leptoquark production cross section depends on the leptoquark Yukawa coupling to lepton-quark pairs and we show that the study of this mode can extend considerably the leptoquark search for a large range of these couplings. In fact, for Yukawa couplings of electromagnetic strength, the combined results of the Tevatron experiments can exclude the existence of leptoquarks with masses up to 260-285 (370-425) GeV at the run I (run II), depending on their type. ©2000 The American Physical Society.

Direct signals for large extra dimensions in the production of fermion pairs at linear colliders

We analyze the potential of the next generation of e+e- linear colliders to search for large extra dimensions via the production of fermion pairs in association with Kaluza-Klein gravitons (G), i.e., e+e- →ff̃G. This process leads to a final state exhibiting a significant amount of missing energy in addition to acoplanar lepton or jet pairs. We study in detail this reaction using the full tree level contributions due to the graviton emission and the standard model backgrounds. After choosing the cuts to enhance the signal, we show that a linear collider with a center-of-mass energy of 500 GeV will be able to probe quantum gravity scales from 0.96 (0.86) up to 4.1 (3.3) TeV at a 2 (5)σ level, depending on the number of extra dimensions. ©2001 The American Physical Society.

Solid state production of thermostable pectinases from thermophilic Thermoascus aurantiacus

Pectin lyase (Pl) and polygalacturonase (Pg) production by Thermoascus aurantiacus 179-5 was carried out by means of solid-state determination using orange bagasse and wheat bran as a carbon sources. Pg and Pl had optimum activity at pH 5.0 and 10.5 respectively. Maximal activity of the enzymes were determined at 65 °C. Pg was stable in the acidic to neutral pH range and at 60 °C for 1 h. whereas Pl was stable at acidic pH and at 60 °C for 5 h. © 2002 Elsevier Science Ltd. All rights reserved.

Influence of organic fertilisation on leaves and essential oil production of Ocimum gratissimum L.

The experiment was installed in Lageado Experimental Farm with aim to verify the influence of organic fertilisation (0, 4, 8 and 12 kg of manure/m2 - with four replications) on leaves and essential oil production of Ocimum gratissimum. The harvesting was done twice (May - autumn and August - winter), and the leaves were separated for extraction of essential oil by Clevenger apparatus. The leaf production and oil content were calculated on dry mass basis. The results showed no statistical difference for organic fertilisation, although significant difference was verified for seasons. The main constituents of essential oil were eugenol and 1,8-cineole. The amount of the eugenol was higher in autumn, while the presence of other components including 1,8-cineole, β-selinene and trans-caryophyllene were more dominant at wintertime.

Production of Nile tilapia Oreochromis niloticus and freshwater prawn Macrobrachium rosenbergii stocked at different densities in polyculture systems in Brazil

The effect of stocking prawns Macrobrachium rosenbergii at increasing densities in ponds with Nile tilapia Oreochromis niloticus reared at low density was evaluated. Twelve 0.01-ha earthen ponds were stocked with 1 tilapia/m2 and 0, 2, 4, or 6 post-larvae prawn/m2. Three replicates were randomly assigned to each prawn density. Postlarval prawns were stocked a week prior to tilapia juveniles and both were harvested 175 d after the beginning of the experiment. Tilapia final average weight, survival, production, and food conversion rates did not differ significantly among treatments (P > 0.05); the averages were 531 g. 67%, 3,673 kg/ha, and 1.91, respectively. Prawn survival rates did not differ for the three stocking densities (mean 90%). However, final weight and production were significantly different (P < 0.05) as follows: 34.0, 23.0, and 14.7 g and 639, 909, and 818 kg/ha, respectively for 2, 4, and 6 prawns/m2 densities. Stocking densities up to 6 prawn/m2 did not affect tilapia production and required neither additional feeding nor significant changes in management. The polyculture system allowed an increase in total production with the same amount of supplied feed, thus improving the system sustainability.

Photoelectrocatalytic production of active chlorine on nanocrystalline titanium dioxide thin-film electrodes

The production of chlorine and hypochlorite is of great economical and technological interest due to their large-scale use in many kinds of commercial applications. Yet, the current processes are not without problems such as inevitable side reactions and the high cost of production. This work reports the photoelectrocatalytic oxidation of chloride ions to free chlorine as it has been investigated by using titanium dioxide (TiO2) and several metal-doped titanium dioxide (M-TiO2) material electrodes. An average concentration of 800 mg L-1 of free chlorine was obtained in an open-air reactor using a TiO2 thin-film electrode biased at +1.0 V (SCE) and illuminated by UV light. The M-doped electrodes have performed poorly compared with the pure TiO2 counterpart. Test solutions containing 0.05 mol L-1 NaCl pH 2.0-4.0 were found to be the best conditions for fast production of free chlorine. A complete investigation of all parameters that influence the global process of chlorine production by the photoelectrocatalytic method such as applied potential, concentration of NaCl, pH solution, and time is presented in detail. In addition, photocurrent vs potential curves and the reaction order are also discussed.

Grazing time and milk production of crossbred cows in a rotational area of Elephant grass and Tanzania grass

This study was carried out in January of two consecutive years. The objective was to evaluate the grazing time, the grazing rate and the milk production of crossbred cows, managed in two rotational grazing areas, one with elephant grass (Pennisetum purpureum Schum. cv. Guaçu) and another one with Tanzania grass (Panicum maximum Jacq. cv. Tanzania), both with natural shade in the rest area. The experiment was divided in two phases, the first with 12 cows that remained day and night in the paddock and were milked twice a day. In the second phase 15 cows were observed and remained 10.43 hours in the paddock during the day, and were kept in a corral during the night. Each cow was observed every 15 minutes. Grass specie had no effect on milk production in the two phases of the experiment. The grazing time was 564 and 474 minutes and the grazing rate was 28.7 and 24.4 minutes/hour for the Elephant grass and Tanzania grass, respectively, in first phase. In the second phase,the grazing time was 461 and 426 minutes and the grazing rate was 42.7 and 39.4 minutes/hour for the Elephant grass and Tanzania grass, respectively. Correlations were observed (P<0.01) between grazing rate and the minimum temperature (-0.68), the maximum temperature (-0.76), the relative humidity (0.44) and the THI (-0.76).

Production of CGTase by a bacillus Alkalophilic CGII strain isolated from wastewater of a manioc flour industry

GCTase production by a new strain of Bacillus alkalophillc CGII isolated from Brazilian wastewater of manioc flour industry was examined. The growth medium used was composed by 1.5% starch, 1.5% nitrogen and 1% Na 2CO3. Higher activity was obtained with starch, maltodextrin and galactose. When glucose was added to the medium, no enzyme production was observed. High enzyme activity and growth were reached when aeration was increased (88.6 U/mL). The enzyme characterization showed an optimum pH and temperature 8.0 and 55°C for starch hydrolyses, respectively. Mg+ and Ca++ showed small activation; however, Hg + and Cu+ showed a strong enzyme inhibition.

Production of Ti-35Nb alloy by powder metallurgy for aerospace application

Titanium and its alloys provide high strength-to-weight ratios, good fatigue strength and increased corrosion resistance compared with others materials. Its acceptance in aerospace has been limited by costs considerations such as high cost of raw material, high buy-to-fly ratios and expensive machining operations. Significant cost reductions can be obtained by vacuum sintering and powder metallurgy (P/M) techniques by producing near net shapes and consequently minimizing material waste and machining time. The Ti 35Nb alloy exhibit a low modulus of elasticity. Stemming from the unique combination of high strength, low modulus of elasticity and low density, this alloy is intrinsically more resistant to shock and explosion damages than most other engineering materials. Samples were produced by mixing of initial metallic powders followed by uniaxial and cold isostatic pressing with subsequent densification by sintering between 900 and 1600 °C, in vacuum. Sintering behavior was studied by means of dilatometry. Sintered samples were characterized for phase composition, microstructure and microhardness by X-ray diffraction, scanning electron microscopy and Vickers indentation, respectively. Density was measured by Archimedes method. Copyright © 2004 Society of Automotive Engineers, Inc.