Shewhart's control charts and process capability ratio applied to a sewage treatment station

The current study used statistical methods of quality control to evaluate the performance of a sewage treatment station. The concerned station is located in Cascavel city, Paraná State. The evaluated parameters were hydrogenionic potential, settleable solids, total suspended solids, chemical oxygen demand and biochemical oxygen demand in five days. Statistical analysis was performed through Shewhart control charts and process capability ratio. According to Shewhart charts, only the BOD(5.20) variable was under statistical control. Through capability ratios, we observed that except for pH the sewage treatment station is not capable to produce effluents under characteristics that fulfill specifications or standard launching required by environmental legislation.

Yield of cotton/cowpea and sunflower/cowpea crop rotation systems during the reclamation process of a saline-sodic soil

The objective of this study was to evaluate the use of subsoiling, gypsum and organic matter associated with the cultivation of cotton, sunflower and cowpea in crop rotation, seeking the reclamation and use of a saline-sodic soil. The treatments were arranged in a randomized block design in split plots with four replications, during two crop cycles (2009/2010 and 2010/2011). The plots were formed by the treatments: T1. Subsoiling (S); T2. S + 20 Mg ha-1 of gypsum; T3. S + 40 Mg ha-1 of organic matter; T4. S + 10 Mg ha-1 of gypsum + 20 Mg ha-1 of organic matter; T5. S + 20 Mg ha-1 of gypsum + 40 Mg ha-1 of organic matter and the sub-plots consisted of the cotton-cowpea (C/CP) and sunflower-cowpea (S/CP) crop rotation. The use of gypsum and organic matter contributed to decrease the soil salinity and sodicity. Cotton was not affected by the treatments, while the sunflower crop was favored by the application of amendments only in the second production cycle. Higher yields of cowpea in T5 treatment, during the 2009/2010 cycle, are indicative that higher doses of gypsum and organic matter applied in this treatment accelerate the reclamation process. For other treatments with amendment application there was a beneficial effect for this crop only in the second cycle, when the values of productivity were similar to T5.

Spray adjuvant characteristics affecting agricultural spraying drift

This study defined the main adjuvant characteristics that may influence or help to understand drift formation process in the agricultural spraying. It was evaluated 33 aqueous solutions from combinations of various adjuvants and concentrations. Then, drifting was quantified by means of wind tunnel; and variables such as percentage of droplets smaller than 50 μm (V50), 100 μm (V100), diameter of mean volume (DMV), droplet diameter composing 10% of the sprayed volume (DV0.1), viscosity, density and surface tension. Assays were performed in triplicate, using Teejet XR8003 flat fan nozzles at 200 kPa (medium size droplets). Spray solutions were stained with Brilliant Blue Dye at 0.6% (m/ v). DMV, V100, viscosity cause most influence on drift hazardous. Adjuvant characteristics and respective methods of evaluation have applicability in drift risk by agricultural spray adjuvants.

Color change and quality response of ‘lane late’ orange submitted to degreening process

This study aimed at evaluating the effects of ethylene on peel color and compositional changes in ‘Lane late’ orange stored under refrigerated and ambient conditions. Physiologically mature, but green-peeled, oranges were exposed to ethylene gas under room temperature and high relative humidity for 24 hours. Storage chamber was ventilated with fresh air after 12 hours to mitigate consequences derived from fruit respiration. Both nondestructive analysis, such as peel color (hue angle, chromaticity, and brightness) and weight loss, and destructive ones (soluble solids, titratable acidity, pH, soluble solids to acidity ratio, and puncture force) were performed upon harvest, after degreening, and every three days during eighteen days in storage. Experiment was carried out using an entirely randomized design with thirty replications for nondestructive and four replications for destructive analyses, in a split plot scheme. Exposure to ethylene ensured a golden yellow peel for both fruit stored under ambient and refrigerated conditions. High relative humidity, associated with low temperature prevented fruit from losing moisture. Fruit exposure to ethylene did not affect weight loss, soluble solids, titratable acidity, pH, soluble solids, acidity ratio, or puncture force.

Designing and manufacturing of a soybean harvest residue picker

ABSTRACT Soy harvest matches seasons with shortage of dry matter supply for ruminant feeding in most Brazilian soy-growing areas. Agricultural machinery-producing companies must have market perception, observing new opportunities and developing equipment to meet costumers’ needs. This paper aims to design, build, and test a device to collect soybean crop residues from the combine cleaning mechanism, consisting mainly of vegetable straw (chaff), and the other plant parts (stems) remain being deposited onto the ground. For equipment designing, we made use of the architectural design methodology proposed in the reference model for the agricultural machinery development process. The equipment was designed and built following the proposed methodology, then installed and put into operation in a John Deere 1165 combine. After initial testing and few adjustments, the device showed satisfactory chaff-collecting performance. The equipment consists of a screw conveyor assembled transversely to the combine and a centrifugal fan assembled on the side. The collected chaff is dumped into a trailer towed by tractor.

AGRICULTURAL MACHINERY AND IMPLEMENTS DESIGN PROCESS: GUIDELINES FOR SMALL AND MID-SIZED BUSINESSES

ABSTRACT This study aims at presenting the process of machine design and agricultural implements by means of a reference model, formulated with the purpose of explaining the development activities of new products, serving as a guideline to coach human resources and to assist in formalizing the process in small and medium-sized businesses (SMB), i.e. up to 500 employees. The methodology used included the process modeling, carried out from case studies in the SMB, and the study of reference models in literature. The modeling formalism used was based on the IDEF0 standard, which identifies the dimensions required for the model detailing: input information; activities; tasks; knowledge domains; mechanisms; controls and information produced. These dimensions were organized in spreadsheets and graphs. As a result, a reference model with 27 activities and 71 tasks was obtained, distributed over four phases of the design process. The evaluation of the model was carried out by the companies participating in the case studies and by experts, who concluded that the model explains the actions needed to develop new products in SMB.

KINETICS OF MASS LOSS OF ARABICA COFFEE DURING ROASTING PROCESS

ABSTRACT Roasting is one of the most complex coffee processing steps due to simultaneous transfers of heat and mass. During this process, beans lose mass because of fast physical and chemical changes that will set color and flavor of the commercial coffee beverage. Therefore, we aimed at assessing the kinetics of mass loss in commercially roasted coffee beans according to heating throughout the processing. For that, we used samples of 350-g Arabica coffee processed grains with water content of 0.1217 kga kg-1, in addition to a continuous roaster with firing gas. The roaster had initial temperatures of 285, 325, 345 and 380 °C, decreasing during the process up to 255, 285, 305 and 335 °C respectively. Mass loss was calculated by the difference between grain weight before and after roasting. We observed a linear variation directly dependent on roaster temperature. For each temperature during the process was obtained a constant mass loss rate, which was reported by the Arrhenius model with r2 above 0.98. In a roaster in non-isothermal conditions, the required activation energy to start the mass loss in a commercial coffee roasting index was 52.27 kJ mol -1.

Application of electrokinetic Fenton process for the remediation of soil contaminated with HCB

Electrokinetic remediation coupled with Fenton oxidation, widely called as Electrokinetic Fenton process is a potential soil remediation technique used for low permeable soil. The applicability of the process has been proved with soil contaminated with a wide range of organic compounds from phenol to the most recalcitrant ones such as PAHs and POPs. This thesis summarizes the major findings observed during an Electrokinetic Fenton Process study conducted for the remediation of low permeable soil contaminated with HCB, a typical hydrophobic organic contaminant. Model low permeable soil, kaolin, was artificially contaminated with HCB and subjected to Electrokinetic Fenton treatments in a series of laboratory scale batch experiments. The use of cyclodextrins as an enhancement agent to mobilize the sorbed contaminant through the system was investigated. Major process hindrances such as the oxidant availability and treatment duration were also addressed. The HCB degradation along with other parameters like soil pH, redox and cumulative catholyte flow were analyzed and monitored. The results of the experiments strengthen the existing knowledge on electrokinetic Fenton process as a promising technology for the treatment of soil contaminated with hydrophobic organic compounds. It has been demonstrated that HCB sorbed to kaolin can be degraded by the use of high concentrations of hydrogen peroxide during such processes. The overall system performances were observed to be influenced by the point and mode of oxidant delivery. Furthermore, the study contributes to new knowledge in shortening the treatment duration by adopting an electrode polarity reversal during the process.

Process approach in quality management - Case: ECO process development in EMS industry

The aim of the thesis was to study quality management with process approach and to find out how to utilize process management to improve quality. The operating environment of organizations has changed. Organizations are focusing on their core competences and networking with suppliers and customers to ensure more effective and efficient value creation for the end customer. Quality management is moving from inspection of the output to prevention of problems from occurring in the first place and management thinking is changing from functional approach to process approach. In the theoretical part of the thesis, it is studied how to define quality, how to achieve good quality, how to improve quality, and how to make sure the improvement goes on as never ending cycle. A selection of quality tools is introduced. Process approach to quality management is described and compared to functional approach, which is the traditional way to manage operations and quality. The customer focus is also studied, and it is presented, that to ensure long term customer commitment, organization needs to react to changing customer requirements and wishes by constantly improving the processes. In the experimental part the theories are tested in a process improvement business case. It is shown how to execute a process improvement project starting from defining the customer requirements, continuing to defining the process ownership, roles and responsibilities, boundaries, interfaces and the actual process activities. The control points and measures are determined for the process, as well as the feedback and corrective action process, to ensure continual improvement can be achieved and to enable verification that customer requirements are fulfilled.

Modelling of calciner in post-combustion carbon capture process

Climate change has given an impetus to research and developed new technologies to reduce significantly carbon dioxide emissions in energy production in the developed countries. The major pollution source, fossil fuels, will be used as an energy source for many decades, which provides the demand for carbon capture and storage technologies. Over recent years many new technologies has been developed and one of the most promising is calcium-looping in post-combustion carbon capture process, which use carbonation-calcination cycle to capture carbon dioxide from the flue gas of a combustion process. First pilot plant for calcium-looping process has been built in Oviedo, Spain. In this study, a three-dimensional model has been created for the calciner, which is one of the two fluidized bed reactors needed for the process. The calciner is a regenerator where the captured carbon dioxide is removed from the calcium material and then collected after the reactor. Thesis concentrates in creating the calciner 3D-model frame with CFB3D-program and testing the model with two different example cases. Used input parameters and calciner geometry are Oviedo pilot plant design parameters. The calculation results give information about the process and show that pilot plant calciner should perform as planned. This Master’s Thesis is done in participation to EU FP7 project CaOling.

Earnings management in the process of preparing corporate financial reports

Earnings management (EM) literature examines managers’ use of judgment in financial reporting and in structuring transactions to alter financial reports for a specific reason. Mainstream EM literature strongly concentrates on statistical research methodologies and it is driven by positive accounting theory. Although EM occurs in the process of preparing corporate financial reports, that process has so far largely remained a “black box” in prior literature. The purpose of this study is to analyze what EM is, how and why it unfolds and how it is intertwined in the process of preparing corporate financial reports. In order to meet the needs of the study, a qualitative case study method will be used. The contribution of this study is threefold. First, it indicates that the concept of EM is not as unam-biguous as the prior literature has assumed. I find that EM is socially constructed and more open to interpretation than absolutely dichotomous conception given by previous studies. Second, this study contributes to our knowledge of the role and the importance of actors involved in conducting EM, indicating that EM is much more actor-dependent than the prior literature has assumed. Third, this study broadens our knowledge base with regard to the processes and potential for EM in academic research.

Requirements management process

Vaatimustenhallinnan alue on hyvin kompleksinen. Sen terminologia on moninaista ja samat termit voivat tarkoittaa eri asioita eri ihmisille. Tämän työn tarkoituksena on selkeyttää vaatimustenhallinnan aluetta. Se vastaa kysymyksiin kuten, mitä vaatimustenhallinta on ja miten sitä voidaan tehdä. Työ keskittyy vaatimusten analysoinnin ja validoinnin alueisiin, joten tältä osin se vastaa myös tarkempiin kysymyksiin kuten, miten koottujen vaatimusten jäljitettävyyttä, dokumentointia, analysointia ja validointia voidaan tehdä. Tämän työn kautta vaatimustenhallinta voidaan esitellä yritykselle ja sen eri osat voivat saada saman käsityksen vaatimustenhallinnasta. Tutkimus esittelee vaatimustenhallinnan prosessina, joka pitää sisällään vaatimusten jäljitettävyyden, vaatimusten dokumentoinnin, vaatimusten muutoksenhallinnan ja vaatimusmäärityksen. Vaatimusmääritys voidaan edelleen jakaa vaatimusten koostamiseen, analysointiin ja neuvotteluun sekä validointiin. Työssä esitellään geneerinen vaatimustenhallinnan prosessimalli. Mallin avulla näytetään, että vaatimustenhallinta on jatkuva prosessi, jossa kaikki aktiviteetit ovat kytköksissä toisiinsa. Näitä aktiviteettejä suoritetaan enemmän tai vähemmän samanaikaisesti. Malli esitetään geneerisessä muodossa, jotta se olisi hyödynnettävissä systeemi- ja tuotekehitys projekteissa sekä sisäisissä kehitysprojekteissa. Se kertoo, että vaatimukset tulisi jalostaa niin aikaisin, kuin mahdollista, jotta muutoksien määrä kehitystyön myöhemmissä vaiheissa voitaisiin minimoida. Jotkin muutokset eivät ole vältettävissä, joten muutoksenhallinnan tueksi tulisi kehittää jäljitettävyyskäsikirja ja jäljitettävyyskäytännöt. Vaatimustenhallintaa tarkastellaan meneillään olevassa kehitysprojektissa. Tarkastelussa tutkitaan, mitä vaatimustenhallinnan toimintatapoja sekä analysointi- ja validointimetodeja käytetään ja mitä voitaisiin tehdä vaatimustenhallinnan parantamiseksi projektissa.

A Bridge Builder or a Raconteur? How Japan Manoeuvres the Global Development Discourse within the TICAD Process

Japan has been a major actor in the field of development cooperation for five decades, even holding the title of largest donor of Official Development Assistance (ODA) during the 1990s. Financial flows, however, are subject to pre-existing paradigms that dictate both donor and recipient behaviour. In this respect Japan has been left wanting for more recognition. The dominance of the so called ‘Washington Consensus’ embodied in the International Monetary Fund (IMF) and the World Bank has long circumvented any indigenous approaches to development problems. The Tokyo International Conference on African Development (TICAD) is a development cooperation conference that Japan has hosted since 1993 every five years. As the main organizer of the conference Japan has opted for the leading position of African development. This has come in the wake of success in the Asian region where Japan has called attention to its role in the so called ‘Asian Miracle’ of fast growing economies. These aspirations have enabled Japan to try asserting itself as a major player in directing the course of global development discourse using historical narratives from both Asia and Africa. Over the years TICAD has evolved into a continuous process with ministerial and follow-up meetings in between conferences. Each conference has produced a declaration that stipulates the way the participants approach the question of African development. Although a multilateral framework, Japan has over the years made its presence more and more felt within the process. This research examines the way Japan approaches the paradigms of international development cooperation and tries to direct them in the context of the TICAD process. Supplementing these questions are inquiries concerning Japan’s foreign policy aspirations. The research shows that Japan has utilized the conference platform to contest other development actors and especially the dominant forces of the IMF and the World Bank in development discourse debate. Japan’s dominance of the process is evident in the narratives found in the conference documents. Relative success has come about by remaining consistent as shown by the acceptance of items from the TICAD agenda in other forums, such as the G8. But the emergence of new players such as China has changed the playing field, as they are engaging other developing countries from a more equal level.