Processed 2 minutes-averaged continuous VM-ADCP (vessel-mounted Acoustic Doppler Current Profiler) profiles during POLARSTERN cruise ANT-XXVIII/3

This data set was obtained during the R. V. POLARSTERN cruise ANT-XXVIII/3. Current velocities were measured nearly continuously when outside territorial waters along the ship's track with a vessel-mounted TRD Instruments' 153.6-kHz Ocean Surveyor ADCP. The transducers were located 11 m below the water line and were protected against ice floes by an acoustically transparent plastic window. The current measurements were made using a pulse of 2s and vertical bin length of 4 m. The ship's velocity was calculated from position fixes obtained by the Global Positioning System (GPS). Heading, roll and pitch data from the ship's gyro platforms and the navigation data were used to convert the ADCP velocities into earth coordinates. Accuracy of the ADCP velocities mainly depends on the quality of the position fixes and the ship's heading data. Further errors stem from a misalignment of the transducer with the ship's centerline. The ADCP data were processed using the Ocean Surveyor Sputum Interpreter (OSSI) software developed by GEOMAR Helmholtz-Zentrum für Ozeanforschung Kiel. The averaging interval was set to 120 seconds. The reference layer was set to bins 5 to 16 avoiding near surface effects and biases near bin 1. Sampling interval setting: 2s; Number of bins: 80; Bin length: 4m; Pulse length: 4m; Blank beyond transmit length: 4m. Data processing setting: Top reference bin: 5; Bottom reference bin: 16; Average: 120s; Misalignment amplitude: 1.0276 +/- 0.1611, phase: 0.8100 +/- 0.7190. The precision for single ping and 4m cell size reported by TRDI is 0.30m/s. Resulting from the single ping precision and the number of pings (most of the time 36) during 120seconds the velocity accuracy is nearly 0.05m/s. (Velocity accuracy = single ping precision divided by square root of the number of pings).

Explorando a execução de técnicas estendidas no oboé encontradas em quatro peças contemporâneas

This dissertation presents an investigation of the evolutionary process of extended oboe techniques, through literary analysis and practical research. The objective of this work is to provide assistance to oboists interested in learning these techniques. Additionally, this work encourages the student, through the process of experimentation, to explore the questions that may arise around the aesthetics of sound, the concept of gesture as an additional visual and aural element in music, and the collaboration and “real-time” creation processes. Discussed within the work, are the relationship between the instrument (the oboe) and extended techniques, and two possible definitions of extended techniques, provided by Luk Vaes (2009) and Gardner Read (1993). Also explored are the how and why some composers have utilized extended techniques in their compositions, including brief discussions relating to extended techniques in real-time composition (improvisation), extended techniques and technological resources, theatrical gesture as an extended technique, and suggestions of how musicians might approach theatrical gestures in performance. Four works were visited: “I Know This Room So Well” – Lisa Bielawa (2007-9); “Four Pieces for Oboe and Piano” – Ernst Krenek (1966); “In Freundschaft” – Karlheinz Stockhausen (1978); “Atem” – Mauricio Kagel (1969-70); and an exploration of the difficulties and solutions associated with each extended technique found within these pieces, was carried out. The following founding works on extended oboe techniques were used, as a basis for research: books - Heinz Holliger’s Pro Musica Nova (1972); Gardner Read’s Compendium of Modern Instrumental Techniques (1993); Peter Veale & Claus-Steffen Mahnkopf’s The Techniques of Oboe Playing (1994); and Libby Van Cleve’s Oboe Unbound: Contemporary Techniques (2004); and articles - Nora Post’s “Monophonic sound resources for the oboe: Part I – Timbre” (1984), “Part II- Pitch and other techniques” (1984), and “Multiphonics for the oboe” (1982).

Sociophonetic deception: the elements of vocal disguise

The focus of my research is vocal disguise within forensic linguistics. Specifically, I answer the question of what individuals are most likely to do with their voice when they do not want to be recognized by a listener. I also focus on whether specific sociolinguistic characteristics – gender and place of origin – have an effect on the disguise choices that individuals make. My research has found that participants show a preference for altering pitch and/or duration across conditions, as well as taking on a foreign accent. Gender and origin were found to be significant for respect to differences in duration, and significance was also found between origin and pitch. These results suggest that disguise might contain elements of style shifting, and that a speaker's choice is more systematic than random.

Active suspension development based on energy analysis

This research focuses on developing active suspension optimal controllers for two linear and non-linear half-car models. A detailed comparison between quarter-car and half-car active suspension approaches is provided for improving two important scenarios in vehicle dynamics, i.e. ride quality and road holding. Having used a half-car vehicle model, heave and pitch motion are analyzed for those scenarios, with cargo mass as a variable. The governing equations of the system are analysed in a multi-energy domain package, i.e., 20-Sim. System equations are presented in the bond-graph language to facilitate calculation of energy usage. The results present optimum set of gains for both ride quality and road holding scenarios are the gains which has derived when maximum allowable cargo mass is considered for the vehicle. The energy implications of substituting passive suspension units with active ones are studied by considering not only the energy used by the actuator, but also the reduction in energy lost through the passive damper. Energy analysis showed less energy was dissipated in shock absorbers when either quarter-car or half-car controllers were used instead of passive suspension. It was seen that more energy could be saved by using half-car active controllers than the quarter-car ones. Results also proved that using active suspension units, whether quarter-car or half-car based, under those realistic limitations is energy-efficient and suggested.

A mathematical model for the maneuvering simulation of a propelled SPAR vessel

To predict the maneuvering performance of a propelled SPAR vessel, a mathematical model was established as a path simulator. A system-based mathematical model was chosen as it offers advantages in cost and time over full Computational Fluid Dynamics (CFD) simulations. The model is intended to provide a means of optimizing the maneuvering performance of this new vessel type. In this study the hydrodynamic forces and control forces are investigated as individual components, combined in a vectorial setting, and transferred to a body-fixed basis. SPAR vessels are known to be very sensitive to large amplitude motions during maneuvers due to the relatively small hydrostatic restoring forces. Previous model tests of SPAR vessels have shown significant roll and pitch amplitudes, especially during course change maneuvers. Thus, a full 6 DOF equation of motion was employed in the current numerical model. The mathematical model employed in this study was a combination of the model introduced by the Maneuvering Modeling Group (MMG) and the Abkowitz (1964) model. The new model represents the forces applied to the ship hull, the propeller forces and the rudder forces independently, as proposed by the MMG, but uses a 6DOF equation of motion introduced by Abkowitz to describe the motion of a maneuvering ship. The mathematical model was used to simulate the trajectory and motions of the propelled SPAR vessel in 10˚/10˚, 20˚/20˚ and 30˚/30˚ standard zig-zag maneuvers, as well as turning circle tests at rudder angles of 20˚ and 30˚. The simulation results were used to determine the maneuverability parameters (e.g. advance, transfer and tactical diameter) of the vessel. The final model provides the means of predicting and assessing the performance of the vessel type and can be easily adapted to specific vessel configurations based on the generic SPAR-type vessel used in this study.

Modelagem e análise dinâmica de um sistema de conversão de energia eólica dotado de gerador síncrono de imã permanente utilizando a plataforma ATP

Human development requires a broad balance between ecological, social and economic factors in order to ensure its own sustainability. In this sense, the search for new sources of energy generation, with low deployment and operation costs, which cause the least possible impact to the environment, has been the focus of attention of all society segments. To do so, the reduction in exploration of fossil fuels and the encouragement of using renewable energy resources for distributed generation have proved interesting alternatives to the expansion of the energy matrix of various countries in the world. In this sense, the wind energy has acquired an increasingly significant role, presenting increasing rates of power grid penetration and highlighting technological innovations such as the use of permanent magnet synchronous generators (PMSG). In Brazil, this fact has also been noted and, as a result, the impact of the inclusion of this source in the distribution and sub-transmission power grid has been a major concern of utilities and agents connected to Brazilian electrical sector. Thus, it is relevant the development of appropriate computational tools that allow detailed predictive studies about the dynamic behavior of wind farms, either operating with isolated load, either connected to the main grid, taking also into account the implementation of control strategies for active/reactive power generation and the keeping of adequate levels of voltage and frequency. This work fits in this context since it comprises mathematical and computational developments of a complete wind energy conversion system (WECS) endowed with PMSG using time domain techniques of Alternative Transients Program (ATP), which prides itself a recognized reputation by scientific and academic communities as well as by electricity professionals in Brazil and elsewhere. The modeling procedures performed allowed the elaboration of blocks representing each of the elements of a real WECS, comprising the primary source (the wind), the wind turbine, the PMSG, the frequency converter, the step up transformer, the load composition and the power grid equivalent. Special attention is also given to the implementation of wind turbine control techniques, mainly the pitch control responsible for keeping the generator under the maximum power operation point, and the vector theory that aims at adjusting the active/reactive power flow between the wind turbine and the power grid. Several simulations are performed to investigate the dynamic behavior of the wind farm when subjected to different operating conditions and/or on the occurrence of wind intensity variations. The results have shown the effectiveness of both mathematical and computational modeling developed for the wind turbine and the associated controls.

"Double Rainbow," "Appalachiana," and "'The Invisible Mass': Exploring Compositional Technique in Alfred Schnittke's Second Symphony"

This dissertation consists of three distinct components: (1) “Double Rainbow,” a notated composition for an acoustic ensemble of 10 instruments, ca. 36 minutes. (2) “Appalachiana”, a fixed-media composition for electro-acoustic music and video, ca. 30 minutes, and (3) “'The Invisible Mass': Exploring Compositional Technique in Alfred Schnittke’s Second Symphony”, an analytical article.

(1) Double Rainbow is a ca. 36 minute composition in four movements scored for 10 instruments: flute, Bb clarinet (doubling on bass clarinet), tenor saxophone (doubling on alto saxophone), french horn, percussion (glockenspiel, vibraphone, wood block, 3 toms, snare drum, bass drum, suspended cymbal), piano, violin, viola, cello, and double bass. Each of the four movements of the piece explore their own distinct character and set of compositional goals. The piece is presented as a musical score and as a recording, which was extensively treated in post-production.

(2) Appalachiana, is a ca. 30 minute fixed-media composition for music and video. The musical component was created as a vehicle to showcase several approaches to electro-acoustic music composition –fft re-synthesis for time manipulation effects, the use of a custom-built software instrument which implements generative approaches to creating rhythm and pitch patterns, using a recording of rain to create rhythmic triggers for software instruments, and recording additional components with acoustic instruments. The video component transforms footage of natural landscapes filmed at several locations in North Carolina, Virginia, and West Virginia into a surreal narrative using a variety of color, lighting, distortion, and time-manipulation video effects.

(3) “‘The Invisible Mass:’ Exploring Compositional Technique in Alfred Schnittke’s Second Symphony” is an analytical article that focuses on Alfred Schnittke’s compositional technique as evidenced in the construction of his Second Symphony and discussed by the composer in a number of previously untranslated articles and interviews. Though this symphony is pivotal in the composer’s oeuvre, there are currently no scholarly articles that offer in-depth analyses of the piece. The article combines analyses of the harmony, form, and orchestration in the Second Symphony with relevant quotations from the composer, some from published and translated sources and others newly translated by the author from research at the Russian State Library in St. Petersburg. These offer a perspective on how Schnittke’s compositional technique combines systematic geometric design with keen musical intuition.

Fabrication of sub-10 nm lamellar structures by solvent vapour annealing of block copolymers

Fabrication of nanoscale patterns through the bottom-up approach of self-assembly of phase-separated block copolymers (BCP) holds promise for nanoelectronics applications. For lithographic applications, it is useful to vary the morphology of BCPs by monitoring various parameters to make “from lab to fab” a reality. Here I report on the solvent annealing studies of lamellae forming polystyrene-blockpoly( 4-vinylpyridine) (PS-b-P4VP). The high Flory-Huggins parameter (χ = 0.34) of PS-b-P4VP makes it an ideal BCP system for self-assembly and template fabrication in comparison to other BCPs. Different molecular weights of symmetric PS-b-P4VP BCPs forming lamellae patterns were used to produce nanostructured thin films by spin-coating from mixture of toluene and tetrahydrofuran(THF). In particular, the morphology change from micellar structures to well-defined microphase separated arrangements is observed. Solvent annealing provides a better alternative to thermal treatment which often requires long annealing periods. The choice of solvent (single and dual solvent exposure) and the solvent annealing conditions have significant effects on the morphology of films and it was found that a block neutral solvent was required to realize vertically aligned PS and P4VP lamellae. Here, we have followed the formation of microdomain structures with time development at different temperatures by atomic force microscopy (AFM). The highly mobilized chains phase separate quickly due to high Flory-Huggins (χ) parameter. Ultra-small feature size (~10 nm pitch size) nanopatterns were fabricated by using low molecular weight PSb- P4VP (PS and P4VP blocks of 3.3 and 3.1 kg mol-1 respectively). However, due to the low etch contrast between the blocks, pattern transfer of the BCP mask is very challenging. To overcome the etch contrast problem, a novel and simple in-situ hard mask technology is used to fabricate the high aspect ratio silicon nanowires. The lamellar structures formed after self-assembly of phase separated PS-b-P4VP BCPs were used to fabricate iron oxide nanowires which acted as hard mask material to facilitate the pattern transfer into silicon and forming silicon nanostructures. The semiconductor and optical industries have shown significant interest in two dimensional (2D) molybdenum disulphide (MoS2) as a potential device material due to its low band gap and high mobility. However, current methods for its synthesis are not ‘fab’ friendly and require harsh environments and processes. Here, I also report a novel method to prepare MoS2 layered structures via self-assembly of a PS-b-P4VP block copolymer system. The formation of the layered MoS2 was confirmed by XPS, Raman spectroscopy and high resolution transmission electron microscopy.

Nanowires for 3d silicon interconnection – low temperature compliant nanowire-polymer film for z-axis interconnect

Semiconductor chip packaging has evolved from single chip packaging to 3D heterogeneous system integration using multichip stacking in a single module. One of the key challenges in 3D integration is the high density interconnects that need to be formed between the chips with through-silicon-vias (TSVs) and inter-chip interconnects. Anisotropic Conductive Film (ACF) technology is one of the low-temperature, fine-pitch interconnect method, which has been considered as a potential replacement for solder interconnects in line with continuous scaling of the interconnects in the IC industry. However, the conventional ACF materials are facing challenges to accommodate the reduced pad and pitch size due to the micro-size particles and the particle agglomeration issue. A new interconnect material - Nanowire Anisotropic Conductive Film (NW-ACF), composed of high density copper nanowires of ~ 200 nm diameter and 10-30 µm length that are vertically distributed in a polymeric template, is developed in this work to tackle the constrains of the conventional ACFs and serves as an inter-chip interconnect solution for potential three-dimensional (3D) applications.

Hermes, a Concerto for Violoncello and Orchestra

This thesis consists of a large composition for violoncello and orchestra, together with an analytical paper in which I discuss my compositional techniques and some of their historical antecedents. The composition draws on the genres of imaginary musical theater, the symphonic poem, and the concerto. It was also inspired by the story of Hermes, the messenger god from Greek mythology. While the myth partially informs the compositional structure, the work is ultimately meant to showcase the versatility of the cello, the coloristic range of the orchestra (in some cases emulating the orchestral styles of previous composers), the balance of cello and orchestra together, and the eclectic invocation of many compositional techniques separately and simultaneously. These techniques encompass set theory (the use of unordered pitch collections), polytonality, and serialism. It is composed in a post-romantic style.

Seawater carbonate chemistry and biological processes of sand dollars Dendraster excentricus during experiments, 2011

Reduction in global ocean pH due to the uptake of increased atmospheric CO2 is expected to negatively affect calcifying organisms, including the planktonic larval stages of many marine invertebrates. Planktonic larvae play crucial roles in the benthic-pelagic life cycle of marine organisms by connecting and sustaining existing populations and colonizing new habitats. Calcified larvae are typically denser than seawater and rely on swimming to navigate vertically structured water columns. Larval sand dollars Dendraster excentricus have calcified skeletal rods supporting their bodies, and propel themselves with ciliated bands looped around projections called arms. Ciliated bands are also used in food capture, and filtration rate is correlated with band length. As a result, swimming and feeding performance are highly sensitive to morphological changes. When reared at an elevated PCO2 level (1000 ppm), larval sand dollars developed significantly narrower bodies at four and six-arm stages. Morphological changes also varied between four observed maternal lineages, suggesting within-population variation in sensitivity to changes in PCO2 level. Despite these morphological changes, PCO2 concentration alone had no significant effect on swimming speeds. However, acidified larvae had significantly smaller larval stomachs and bodies, suggesting reduced feeding performance. Adjustments to larval morphologies in response to ocean acidification may prioritize swimming over feeding, implying that negative consequences of ocean acidification are carried over to later developmental stages.

Design of Transparent Conducting Electrodes and Surface Relief Gratings for Plasmonic Polymer Solar Cells

As the concept of renewable energy becomes increasingly important in the modern society, a considerable amount of research has been conducted in the field of organic photovoltaics in recent years. Although organic solar cells generally have had lower efficiencies compared to silicon solar cells, they have the potential to be mass produced via solution processing. A common polymer solar cell architecture relies on the usage of P3HT (electron donor) and PCBM (electron acceptor) bulk heterojunction. One of the main issues with this configuration is that in order to compensate for the high exciton recombination rate, the photoactive layer is often made very thin (on the order of 100 $%). This results in low solar cell photocurrents due to low absorption. This thesis investigates a novel method of light trapping by coupling surface plasmons at the electrode interface via surface relief gratings, leading to EM field enhancements and increased photo absorption. Experimental work was first conducted on developing and optimizing a transparent electrode of the form &'()/+,/&'() to replace the traditional ITO electrode since the azopolymer gratings cannot withstand the high temperature processing of ITO films. It was determined that given the right thickness profiles and deposition conditions, the MAM stack can achieve transmittance and conductivity similar to ITO films. Experimental work was also conducted on the fabrication and characterization of surface relief gratings, as well as verification of the surface plasmon generation. Surface relief gratings were fabricated easily and accurately via laser interference lithography on photosensitive azopolymer films. Laser diffraction studies confirmed the grating pitch, which is dependent on the incident angle and wavelength of the writing beam. AFM experiments were conducted to determine the surface morphology of the gratings, before and after metallic film deposition. It was concluded that metallic film deposition does not significantly alter the grating morphologies.

Design of Transparent Conducting Electrodes and Surface Relief Gratings for Plasmonic Polymer Solar Cells

As the concept of renewable energy becomes increasingly important in the modern society, a considerable amount of research has been conducted in the field of organic photovoltaics in recent years. Although organic solar cells generally have had lower efficiencies compared to silicon solar cells, they have the potential to be mass produced via solution processing. A common polymer solar cell architecture relies on the usage of P3HT (electron donor) and PCBM (electron acceptor) bulk heterojunction. One of the main issues with this configuration is that in order to compensate for the high exciton recombination rate, the photoactive layer is often made very thin (on the order of 100 $%). This results in low solar cell photocurrents due to low absorption. This thesis investigates a novel method of light trapping by coupling surface plasmons at the electrode interface via surface relief gratings, leading to EM field enhancements and increased photo absorption. Experimental work was first conducted on developing and optimizing a transparent electrode of the form &'()/+,/&'() to replace the traditional ITO electrode since the azopolymer gratings cannot withstand the high temperature processing of ITO films. It was determined that given the right thickness profiles and deposition conditions, the MAM stack can achieve transmittance and conductivity similar to ITO films. Experimental work was also conducted on the fabrication and characterization of surface relief gratings, as well as verification of the surface plasmon generation. Surface relief gratings were fabricated easily and accurately via laser interference lithography on photosensitive azopolymer films. Laser diffraction studies confirmed the grating pitch, which is dependent on the incident angle and wavelength of the writing beam. AFM experiments were conducted to determine the surface morphology of the gratings, before and after metallic film deposition. It was concluded that metallic film deposition does not significantly alter the grating morphologies.

Investigating Multiple Roles of Vocal Confidence in Persuasion

Although persuasion often occurs via oral communication, it remains a comparatively understudied area. This research tested the hypothesis that changes in three properties of voice influence perceptions of speaker confidence, which in turn differentially affects attitudes according to different underlying psychological processes that the Elaboration Likelihood Model (ELM, Petty & Cacioppo, 1984), suggests should emerge under different levels of thought. Experiment 1 was a 2 (Elaboration: high vs. low) x 2 (Vocal speed: increased speed vs. decreased speed) x 2 (Vocal intonation: falling intonation vs. rising intonation) between participants factorial design. Vocal speed and vocal intonation influenced perceptions of speaker confidence as predicted. In line with the ELM, under high elaboration, confidence biased thought favorability, which in turn influenced attitudes. Under low elaboration, confidence did not bias thoughts but rather directly influenced attitudes as a peripheral cue. Experiment 2 used a similar design as Experiment 1 but focused on vocal pitch. Results confirmed pitch influenced perceptions of confidence as predicted. Importantly, we also replicated the bias and cue processes found in Experiment 1. Experiment 3 investigated the process by which a broader spectrum of speech rate influenced persuasion under moderate elaboration. In a 2 (Argument quality: strong vs. weak) x 4 (Vocal speed: extremely slow vs. moderately slow vs. moderately fast vs. extremely fast) between participants factorial design, results confirmed the hypothesized non-linear relationship between speech rate and perceptions of confidence. In line with the ELM, speech rate influenced persuasion based on the amount of processing. Experiment 4 investigated the effects of a broader spectrum of vocal intonation on persuasion under moderate elaboration and used a similar design as Experiment 3. Results indicated a partial success of our vocal intonation manipulation. No evidence was found to support the hypothesized mechanism. These studies show that changes in several different properties of voice can influence the extent to which others perceive them as confident. Importantly, evidence suggests different vocal properties influence persuasion by the same bias and cue processes under high and low thought. Evidence also suggests that under moderate thought, speech rate influences persuasion based on the amount of processing.

On a first-name basis: Englishization and naming in Flanders

Following and contributing to the ongoing shift from more structuralist, system-oriented to more pragmatic, socio-cultural oriented anglicism research, this paper verifies to what extent the global spread of English affects naming patterns in Flanders. To this end, a diachronic database of first names is constructed, containing the top 75 most popular boy and girl names from 2005 until 2014. In a first step, the etymological background of these names is documented and the evolution in popularity of the English names in the database is tracked. Results reveal no notable surge in the preference for English names. This paper complements these database-driven results with an experimental study, aiming to show how associations through referents are in this case more telling than associations through phonological form (here based on etymology). Focusing on the socio-cultural background of first names in general and of Anglo-American pop culture in particular, the second part of the study specifically reports on results from a survey where participants are asked to name the first three celebrities that leap to mind when hearing a certain first name (e.g. Lana, triggering the response Del Rey). Very clear associations are found between certain first names and specific celebrities from Anglo-American pop culture. Linking back to marketing research and the social turn in onomastics, we will discuss how these celebrities might function as referees, and how social stereotypes surrounding these referees are metonymically attached to their first names. Similar to the country-of-origin-effect in marketing, these metonymical links could very well be the reason why parents select specific “celebrity names”. Although further attitudinal research is needed, this paper supports the importance of including socio-cultural parameters when conducting onomastic research.