A system verification strategy based on the BST infrastructure

A good verification strategy should bring near the simulation and real functioning environments. In this paper we describe a system-level co-verification strategy that uses a common flow for functional simulation, timing simulation and functional debug. This last step requires using a BST infrastructure, now widely available on commercial devices, specially on FPGAs with medium/large pin-counts.

Backside-surface imprinting as a new strategy to generate specific plastic antibody materials

A backside protein-surface imprinting process is presented herein as a novel way to generate specific synthetic antibody materials. The template is covalently bonded to a carboxylated-PVC supporting film previously cast on gold, let to interact with charged monomers and surrounded next by another thick polymer. This polymer is then covalently attached to a transducing element and the backside of this structure (supporting film plus template) is removed as a regular “tape”. The new sensing layer is exposed after the full template removal, showing a high density of re-binding positions, as evidenced by SEM. To ensure that the templates have been efficiently removed, this re-binding layer was cleaned further with a proteolytic enzyme and solution washout. The final material was named MAPS, as in the back-side reading of SPAM, because it acts as a back-side imprinting of this recent approach. It was able to generate, for the first time, a specific response to a complex biomolecule from a synthetic material. Non-imprinted materials (NIMs) were also produced as blank and were used as a control of the imprinting process. All chemical modifications were followed by electrochemical techniques. This was done on a supporting film and transducing element of both MAPS and NIM. Only the MAPS-based device responded to oxLDL and the sensing layer was insensitive to other serum proteins, such as myoglobin and haemoglobin. Linear behaviour between log(C, μg mL−1) versus charged tranfer resistance (RCT, Ω) was observed by electrochemical impedance spectroscopy (EIS). Calibrations made in Fetal Calf Serum (FCS) were linear from 2.5 to 12.5 μg mL−1 (RCT = 946.12 × log C + 1590.7) with an R-squared of 0.9966. Overall, these were promising results towards the design of materials acting close to the natural antibodies and applied to practical use of clinical interest.

Is mental practice an effective adjunct therapeutic strategy for upper limb motor restoration after stroke? A systematic review and meta- analysis

Stroke is one of the most common conditions requiring rehabilitation, and its motor impairments are a major cause of permanent disability. Hemiparesis is observed by 80% of the patients after acute stroke. Neuroimaging studies showed that real and imagined movements have similarities regarding brain activation, supplying evidence that those similarities are based on the same process. Within this context, the combination of mental practice (MP) with physical and occupational therapy appears to be a natural complement based on neurorehabilitation concepts. Our study seeks to investigate if MP for stroke rehabilitation of upper limbs is an effective adjunct therapy. PubMed (Medline), ISI knowledge (Institute for Scientific Information) and SciELO (Scientific Electronic Library) were terminated on 20 February 2015. Data were collected on variables as follows: sample size, type of supervision, configuration of mental practice, setting the physical practice (intensity, number of sets and repetitions, duration of contractions, rest interval between sets, weekly and total duration), measures of sensorimotor deficits used in the main studies and significant results. Random effects models were used that take into account the variance within and between studies. Seven articles were selected. As there was no statistically significant difference between the two groups (MP vs control), showed a - 0.6 (95% CI: -1.27 to 0.04), for upper limb motor restoration after stroke. The present meta-analysis concluded that MP is not effective as adjunct therapeutic strategy for upper limb motor restoration after stroke.

Crowdsourcing innovation: a strategy to leverage enterprise innovation

Innovation is recognized by academics and practitioners as an essential competitive enabler for any company to survive, to remain competitive and to grow. Investments in tasks of R&D have not always brought the expected results. But that doesn't mean that the outcomes would not be useful to other companies of the same business area or even from another area. Thus, there is much knowledge already available in the market that can be helpful to some and profitable to others. So, the ideas and expertise can be found outside a company's boundaries and also exported from within. Information, knowledge, experience, wisdom is already available in the millions of the human beings of this planet, the challenge is to use them through a network to produce new ideas and tips that can be useful to a company with less costs. This was the reason for the emergence of the area of crowdsourcing innovation. Crowdsourcing innovation is a way of using the Web 2.0 tools to generate new ideas through the heterogeneous knowledge available in the global network of individuals highly qualified and with easy access to information and technology. So, a crowdsourcing innovation broker is an organization that mediates the communication and relationship between the seekers - companies that aspire to solve some problem or to take advantage of any business opportunity - with a crowd that is prone to give ideas based on their knowledge, experience and wisdom. This paper makes a literature review on models of open innovation, crowdsourcing innovation, and technology and knowledge intermediaries, and discusses this new phenomenon as a way to leverage the innovation capacity of enterprises. Finally, the paper outlines a research design agendafor explaining crowdsourcing innovation brokering phenomenon, exploiting its players, main functions, value creation process, and knowledge creation in order to define a knowledge metamodel of such intermediaries.

Everis’ Internationalization strategy to the Nordic market

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Strategy definition of a new business opportunity in mobile-casual gaming: Partnership between Nmusic and Rovio Entertainment Ltd.

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Internationalization Plan - How can UniPlaces improve its customer acquisition strategy in the London market?

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Strategy of Logoplaste in Mozambique's flexible plastic packaging industry

Logoplaste is a specialist in operating in-house industrial sites for manufacturing rigid plastic packaging containers. In developing countries, especially in Africa, the low income of consumers does not allow a widespread adoption of products typically sold in rigid plastic containers. In these countries the flexible packages are usually adopted as they allow for better ratios of cost/litter of product, particularly in smaller packages. Should Logoplaste offer this type of technology in order to expand into developing countries?

Enhancing and implementing a pairs trading strategy

This paper designs a pairs trading model with the intent to identify existing profitable market opportunities to invest, i.e. traditionally strong correlated stocks that have diverged from its historical norm. It comprises a broad literature review on this strategy whose relevant findings (strategy improvements) are contemplated in the model. The authors combine the statistical results of the model with a backtesting analysis in order to provide guidance on the best investment opportunities.

Internationalization strategy of Skypro Shoes to Japan

Skypro is a footwear brand targeted at the aviation professionals’ niche market, explored by the Portuguese microenterprise Abotoa Lda..The saturation of the Portuguese market led Skypro to expand to different worldwide countries and to be a footwear supplier of Airlines from the USA, Qatar or Australia, among others. Abotoa aims for its 2014’s exports to represent around 80% of total sales and this Internationalization Plan for Japan represents the possibility of further exploring the Asian market. Japan appears as the 2nd worldwide footwear importer and the 5th footwear consumer, with a high purchasing power – GDP per capita (PPP). This country possesses two enormous Airlines (ANA and JAL) that employ more than 15000 on-board personnel, the world’s 4th busiest Airport in 2013 (Tokyo’s Haneda International Airport) and a geographic structure with more than 6500 islands, implying high frequency of aerial transportation in the medium-run. These aspects make Japan an adequate country to invest in. At the course of this Work Project, trustworthy recommendations are provided for the current state of Abotoa and for the introduction and implementation of this Internationalization Plan. These findings strongly suggest that Skypro should indeed penetrate Japan’s market.

FPC current marketing strategy

Direct Research Internship Course

Indoor location-based analytics systems: Portuguese market compettive assessment and entry procing strategy of BIPs' technology in Sonae Sierra Shopping malls stores

This project attempts to provide an in-depth competitive assessment of the Portuguese indoor location-based analytics market, and to elaborate an entry-pricing strategy for Business Intelligence Positioning System (BIPS) implementation in Portuguese shopping centre stores. The role of industry forces and company’s organizational resources platform to sustain company’s competitive advantage was explored. A customer value-based pricing approach was adopted to assess BIPS value to retailers and maximize Sonae Sierra profitability. The exploratory quantitative research found that there is a market opportunity to explore every store area types with tailored proposals, and to set higher-than-tested membership fees to allow a rapid ROI, concluding there are propitious conditions for Sierra to succeed in BIPS store’s business model in Portugal.

Credit default swap (CDS) prediction model & trading strategy

This project focuses on the study of different explanatory models for the behavior of CDS security, such as Fixed-Effect Model, GLS Random-Effect Model, Pooled OLS and Quantile Regression Model. After determining the best fitness model, trading strategies with long and short positions in CDS have been developed. Due to some specifications of CDS, I conclude that the quantile regression is the most efficient model to estimate the data. The P&L and Sharpe Ratio of the strategy are analyzed using a backtesting analogy, where I conclude that, mainly for non-financial companies, the model allows traders to take advantage of and profit from arbitrages.

Internationalization strategy of Quinta dos Termos to Canada

Quinta dos Termos, a Portuguese winery, currently faces the need to expand internationally due to difficulties in distributing its current production in Portugal. This work project will analyze the firm’s characteristics, its development in the Portuguese market and the value proposition it offers. A market analysis will also be performed prior to evaluating the internationalization need of Quinta dos Termos. The Canadian market will be assessed as an opportunity to expand internationally by evaluating factors supporting that strategy; namely the market attractiveness, the most adequate implementation plan and a competitive analysis to better understand the success expectations in the market.