Investigation of aspect ratio of hole drilling from micro to nanoscale via focused ion beam fine milling

Holes with different sizes from microscale to nanoscale were directly fabricated by focused ion beam (FIB) milling in this paper. Maximum aspect ratio of the fabricated holes can be 5:1 for the hole with large size with pure FIB milling, 10:1 for gas assistant etching, and 1:1 for the hole with size below 100 nm. A phenomenon of volume swell at the boundary of the hole was observed. The reason maybe due to the dose dependence of the effective sputter yield in low intensity Gaussian beam tail regions and redeposition. Different materials were used to investigate variation of the aspect ratio. The results show that for some special material, such as Ni-Be, the corresponding aspect ratio can reach 13.8:1 with Cl₂ assistant etching, but only 0.09:1 for Si(100) with single scan of the FIB.

Micro-layered-photolithography for Micro-Fabrication and Micro-Molding

A novel process based on the principle of layered photolithography has been proposed and tested for making real three-dimensional micro-structures. An experimental setup was designed and built for doing experiments on this micro-fabrication process. An ultraviolet (UV) excimer laser at the wavelength of 248 nm was used as the light source and a single piece of photo-mask carrying a series of two dimensional (2D) patterns sliced from a three dimensional (3D) micro-part was employed for the photolithography process. The experiments were conducted on the solidification of liquid photopolymer from single layer to multiple layers. The single-layer photolithography experiments showed that certain photopolymers could be applied for the 3D micro-fabrication, and solid layers with sharp shapes could be formed from the liquid polymer identified. By using a unique alignment technique, multiple layers of photolithography was successfully realized for a micro-gear with features at 60 microns. Electroforming was also conducted for converting the photopolymer master to a metal cavity of the micro-gear, which proved that the process is feasible for micro-molding.

Plasma polymerization of C[subscript 4]F[subscript 8] thin film on high aspect ratio silicon molds

High aspect ratio polymeric micro-patterns are ubiquitous in many fields ranging from sensors, actuators, optics, fluidics and medical. Second generation PDMS molds are replicated against first generation silicon molds created by deep reactive ion etching. In order to ensure successful demolding, the silicon molds are coated with a thin layer of C[subscript 4]F[subscript 8] plasma polymer to reduce the adhesion force. Peel force and demolding status are used to determine if delamination is successful. Response surface method is employed to provide insights on how changes in coil power, passivating time and gas flow conditions affect plasma polymerization of C[subscript 4]F[subscript 8].

Process Variability in Micro-Embossing

A promising technique for the large-scale manufacture of micro-fluidic devices and photonic devices is hot embossing of polymers such as PMMA. Micro-embossing is a deformation process where the workpiece material is heated to permit easier material flow and then forced over a planar patterned tool. While there has been considerable, attention paid to process feasibility very little effort has been put into production issues such as process capability and eventual process control. In this paper, we present initial studies aimed at identifying the origins and magnitude of variability for embossing features at the micron scale in PMMA. Test parts with features ranging from 3.5- 630 µm wide and 0.9 µm deep were formed. Measurements at this scale proved very difficult, and only atomic force microscopy was able to provide resolution sufficient to identify process variations. It was found that standard deviations of widths at the 3-4 µm scale were on the order of 0.5 µm leading to a coefficient of variation as high as 13%. Clearly, the transition from test to manufacturing for this process will require understanding the causes of this variation and devising control methods to minimize its magnitude over all types of parts.

The Inertio-Elastic Planar Entry Flow of Low-Viscosity Elastic Fluids in Micro-fabricated Geometries

The non-Newtonian flow of dilute aqueous polyethylene oxide (PEO) solutions through microfabricated planar abrupt contraction-expansions is investigated. The contraction geometries are fabricated from a high-resolution chrome mask and cross-linked PDMS gels using the tools of soft-lithography. The small length scales and high deformation rates in the contraction throat lead to significant extensional flow effects even with dilute polymer solutions having time constants on the order of milliseconds. The dimensionless extra pressure drop across the contraction increases by more than 200% and is accompanied by significant upstream vortex growth. Streak photography and videomicroscopy using epifluorescent particles shows that the flow ultimately becomes unstable and three-dimensional. The moderate Reynolds numbers (0.03 ≤ Re ≤ 44) associated with these high Deborah number (0 ≤ De ≤ 600) microfluidic flows results in the exploration of new regions of the Re-De parameter space in which the effects of both elasticity and inertia can be observed. Understanding such interactions will be increasingly important in microfluidic applications involving complex fluids and can best be interpreted in terms of the elasticity number, El = De/Re, which is independent of the flow kinematics and depends only on the fluid rheology and the characteristic size of the device.

Educating an iPod generation: undergraduate attitudes, experiences and understanding of vodcast and podcast use

ognyline) There is an increasing pressure on university staff to provide ever more information and resources to students. This study investigated student opinions on (audio) podcasts and (video) vodcasts and how well they met requirements and aided learning processes. Two experiments within the Aston University looked at student opinion on, and usage of, podcasts and vodcasts for a selection of their psychology lectures.

El micro: un deporte de todos y para todos

Según estudios realizados por la Federación Colombiana de Fútbol de Salón, en Colombia existen al menos 1.2 millones de jugadores de este deporte, de los cuales una cuarta parte (300.000, aproximadamente) se encuentra en Bogotá. Tan sólo en la capital del país se juegan en un fin de semana más de 2.000 partidos oficiales y su liga es una de las más competitivas a nivel nacional. A continuación presento tres crónicas que retratarán de cerca la popularidad del microfútbol en la ciudad de Bogotá. Son más de 50 años de un deporte que llegó al país gracias al doctor Jaime Arroyave Rendón pero que en cuarenta minutos se reinventa en los pies de los ‘micreros’ bogotanos.

Tor: the second generation onion router

This is the original Dingledine et al's Tor paper. Please consider it required reading.

INFO6003 (2013) Tor: the second generation onion router -- Paper

This is the original Dingledine et al's Tor paper. Please consider it required reading.

Dynamic Document Generation from Semantic Web Data

This talk will present an overview of the ongoing ERCIM project SMARTDOCS (SeMAntically-cReaTed DOCuments) which aims at automatically generating webpages from RDF data. It will particularly focus on the current issues and the investigated solutions in the different modules of the project, which are related to document planning, natural language generation and multimedia perspectives. The second part of the talk will be dedicated to the KODA annotation system, which is a knowledge-base-agnostic annotator designed to provide the RDF annotations required in the document generation process.

Intro to Matlab for Oceanography: Micro-lectures

This is a collection of 12 micro-lectures, to be used by students in advance of practical sessions. Durations range for 3 min to 10 min. Topics include: ****** 1. Introduction ****** 2. Data classes ****** 3. Matrices ****** 4. Getting help ****** 5. Index notation ****** 6. 1- and 2-dimensional data ****** 7. 3-dimensional data ****** 8. Booleans (True/False) ****** 9. Designing a programme (Algorithms) ****** 10. Flow control: If-then statements ****** 11. Flow control: For-do loops ****** 12. Making nicer figures ******

Data-Driven Text Generation using Neural Networks & Provenance is Complicated and Boring — Is there a solution?

Title: Data-Driven Text Generation using Neural Networks Speaker: Pavlos Vougiouklis, University of Southampton Abstract: Recent work on neural networks shows their great potential at tackling a wide variety of Natural Language Processing (NLP) tasks. This talk will focus on the Natural Language Generation (NLG) problem and, more specifically, on the extend to which neural network language models could be employed for context-sensitive and data-driven text generation. In addition, a neural network architecture for response generation in social media along with the training methods that enable it to capture contextual information and effectively participate in public conversations will be discussed. Speaker Bio: Pavlos Vougiouklis obtained his 5-year Diploma in Electrical and Computer Engineering from the Aristotle University of Thessaloniki in 2013. He was awarded an MSc degree in Software Engineering from the University of Southampton in 2014. In 2015, he joined the Web and Internet Science (WAIS) research group of the University of Southampton and he is currently working towards the acquisition of his PhD degree in the field of Neural Network Approaches for Natural Language Processing. Title: Provenance is Complicated and Boring — Is there a solution? Speaker: Darren Richardson, University of Southampton Abstract: Paper trails, auditing, and accountability — arguably not the sexiest terms in computer science. But then you discover that you've possibly been eating horse-meat, and the importance of provenance becomes almost palpable. Having accepted that we should be creating provenance-enabled systems, the challenge of then communicating that provenance to casual users is not trivial: users should not have to have a detailed working knowledge of your system, and they certainly shouldn't be expected to understand the data model. So how, then, do you give users an insight into the provenance, without having to build a bespoke system for each and every different provenance installation? Speaker Bio: Darren is a final year Computer Science PhD student. He completed his undergraduate degree in Electronic Engineering at Southampton in 2012.

De lo micro a lo macro prudencial: Un análisis de la supervisión bancaria desde la econometría espacial

La crisis que se desató en el mercado hipotecario en Estados Unidos en 2008 y que logró propagarse a lo largo de todo sistema financiero, dejó en evidencia el nivel de interconexión que actualmente existe entre las entidades del sector y sus relaciones con el sector productivo, dejando en evidencia la necesidad de identificar y caracterizar el riesgo sistémico inherente al sistema, para que de esta forma las entidades reguladoras busquen una estabilidad tanto individual, como del sistema en general. El presente documento muestra, a través de un modelo que combina el poder informativo de las redes y su adecuación a un modelo espacial auto regresivo (tipo panel), la importancia de incorporar al enfoque micro-prudencial (propuesto en Basilea II), una variable que capture el efecto de estar conectado con otras entidades, realizando así un análisis macro-prudencial (propuesto en Basilea III).

New Generation Antidepressants in Painful Diabetic Neuropathy

The incidence of diabetic neuropathy increases with the duration of diabetes and the degree of hyperglycaemia. Pain is one of the most common and incapacitating symptoms of diabetic neuropathy and its pharmacological control is complex. The effectiveness of antidepressive agents has been described in different types of neuropathic pain, but their effectiveness, when used as analgesics in painful diabetic neuropathy, still remains controversial. Objective: To review the possible role of new-generation antidepressive agents in the treatment of pain in diabetic peripheral neuropathy. This work has thus consisted of a meta-analysis for determining which antidepressive agent had the best analgesic potential in managing pain in patients suffering from painful diabetic neuropathy. Methods: This search covered the Cochrane, MEDLINE, EMBASE and LILACS databases, between January 2000 and August 2007. The following information was obtained from each article: criteria for diagnosing diabetic neuropathy, patients' age average, antidepressant drug received and dose, sample size, duration of the disease and treatment follow-up, outcome measurement, evaluation of pain and rescue medication. Results: A combined RR: 1.67 (95% CI 1.38 - 2.02) was obtained; this result indicated that the antidepressive agent duloxetine, was effective for controlling pain in diabetic neuropathy. The corresponding NNT for Duloxetine was established, according to our interests; NNT = 6 (95% CI 5- 8) for achieving greater than 50% analgesia in patients suffering from painful diabetic neuropathy. Discussion: Antidepressive agents are frequently employed in the specific case of diabetic neuropathy; their analgesic benefit has been demonstrated.