Heat Activated Prestressing of Shape Memory Alloys for Active Confinement of Concrete Sections

This paper presents the results from the experimental investigation on heat activated prestressing of Shape Memory Alloy (SMA) wires for active confinement of concrete sections. Active confinement of concrete is found to be much more effective than passive confinement which becomes effective only when the concrete starts to dilate. Active confinement achieved using conventional prestressing techniques often faces many obstacles due to practical limitations. A class of smart materials that has recently drawn attention in civil engineering is the super elastic SMA which has the ability to undergo reversible hysteretic shape change known as the shape memory effect. The shape memory effect of SMAs can be utilized to develop a convenient prestressing technique for active confinement of concrete sections.
In this study a series of experimental tests are conducted to study Heat Activated Prestress (HAP) in SMAs. Three different types of tests are conducted with different loading protocol to determine parameters such as HAP, residual strain after heating and range of strain that can be used for effective active confinement after HAP. Test results show a maximum HAP of about 500 MPa can be achieved after heating and approximately 450MPa is retained at 25oC in specimens pre-strained by 6%. A substantial amount of strain recovery upon unloading and after heating the SMA wires is recorded. About 2.5% elastic strain recovery upon unloading from 6% strain level is observed. In the specimen pre-strained by 6%, a total of 4% strain is recovered when unloaded after heating. A strain range of 3% is found available for effective confinement after HAP. Test results demonstrate that SMAs have unique features that can be intelligently employed in many civil engineering applications including active confinement of concrete sections.

Peace by Piece: (Re) imagining Division in Belfast’s Contested Spaces through Memory

This paper investigates processes and actions of diversifying memories of division in Northern Ireland’s political conflict known as the Troubles. Societal division is manifested in its built fabric and territories that have been adopted by predominant discourses of a fragmented society in Belfast; the unionist east and the nationalist west. The aim of the paper is to explore current approaches in planning contested spaces that have changed over time, leading to success in many cases. The argument is that divided cities, like Belfast, feature spatial images and memories of division that range from physical, clear-cut segregation to manifested actions of violence and have become influential representations in the community’s associative memory. While promoting notions of ‘re-imaging’ by current councils demonstrates a total erasure of the Troubles through cleansing its local collective memory, there yet remains an attempt to communicate a different tale of the city’s socio-economic past, to elaborate its supremacy for shaping future lived memories. Yet, planning Belfast’s contested areas is still suffering from a poor understanding of the context and its complexity against overambitious visions. 

Corrosion Fatigue Behaviour of Laser-welded Shape Memory NiTi Wires in a Simulated Body Fluid

Corrosion fatigue is a fracture process as a consequence of synergistic interactions between the material structure, corrosive environment and cyclic loads/strains. It is difficult to be detected and can cause unexpected failure of engineering components in use. This study reveals a comparison of corrosion fatigue behaviour of laser-welded and bare NiTi wires using bending rotation fatigue (BRF) test coupled with a specifically-designed corrosion cell. The testing medium was Hanks’ solution (simulated body fluid) at 37.5 oC. Electrochemical impedance spectroscopic (EIS) measurement was carried out to monitor the change of corrosion resistance of sample during the BRF test at different periods of time. Experiments indicate that the laser-welded NiTi wire would be more susceptible to the corrosion fatigue attack than the bare NiTi wire. This study can serve as a benchmark for the product designers and engineers to understand the corrosion fatigue behaviour of the NiTi laser weld joint and determine the fatigue life safety factor for NiTi medical devices/implants involving laser welding in the fabrication process.

Energy Optimization of Memory Intensive Parallel Workloads

Energy consumption is an important concern in modern multicore processors. The energy consumed by a multicore processor during the execution of an application can be minimized by tuning the hardware state utilizing knobs such as frequency, voltage etc. The existing theoretical work on energy minimization using Global DVFS (Dynamic Voltage and Frequency Scaling), despite being thorough, ignores the time and the energy consumed by the CPU on memory accesses and the dynamic energy consumed by the idle cores. This article presents an analytical energy-performance model for parallel workloads that accounts for the time and the energy consumed by the CPU chip on memory accesses in addition to the time and energy consumed by the CPU on CPU instructions. In addition, the model we present also accounts for the dynamic energy consumed by the idle cores. The existing work on global DVFS for parallel workloads shows that using a single frequency for the entire duration of a parallel application is not energy optimal and that varying the frequency according to the changes in the parallelism of the workload can save energy. We present an analytical framework around our energy-performance model to predict the operating frequencies (that depend upon the amount of parallelism) for global DVFS that minimize the overall CPU energy consumption. We show how the optimal frequencies in our model differ from the optimal frequencies in a model that does not account for memory accesses. We further show how the memory intensity of an application affects the optimal frequencies.

ALMA-resolved salt emission traces the chemical footprint and inner wind morphology of VY Canis Majoris

(abreviated) We aim to study the inner-wind structure (R<250 Rstar) of the well-known red supergiant VY CMa. We analyse high spatial resolution (~0".24x0".13) ALMA Science Verification (SV) data in band 7 in which four thermal emission lines of gaseous sodium chloride (NaCl) are present at high signal-to-noise ratio. For the first time, the NaCl emission in the inner wind region of VY CMa is spatially resolved. The ALMA observations reveal the contribution of up to four different spatial regions. The NaCl emission pattern is different compared to the dust continuum and TiO2 emission already analysed from the ALMA SV data. The emission can be reconciled with an axisymmetric geometry, where the lower density polar/rotation axis has a position angle of ~50 degrees measured from north to east. However, this picture can not capture the full morphological diversity, and discrete mass ejection events need to be invoked to explain localized higher-density regions. The velocity traced by the gaseous NaCl line profiles is significantly lower than the average wind terminal velocity, and much slower than some of the fastest mass ejections, signalling a wide range of characteristic speeds for the mass loss. Gaseous NaCl is detected far beyond the main dust condensation region. Realising the refractory nature of this metal halide, this hints at a chemical process preventing all NaCl from condensing onto dust grains. We show that in the case of the ratio of the surface binding temperature to the grain temperature being ~50, only some 10% of NaCl remains in gaseous form, while for lower values of this ratio thermal desorption efficiently evaporates NaCl. Photodesorption by stellar photons seems not to be a viable explanation for the detection of gaseous NaCl at 220 Rstar from the central star, and instead, we propose shock-induced sputtering driven by localized mass ejection events as alternative.

Managed Acceleration for In-Memory Database Analytic Workloads

In-Memory Databases (IMDBs), such as SAP HANA, enable new levels of database performance by removing the disk bottleneck and by compressing data in memory. The consequence of this improved performance means that reports and analytic queries can now be processed on demand. Therefore, the goal is now to provide near real-time responses to compute and data intensive analytic queries. To facilitate this, much work has investigated the use of acceleration technologies within the database context. While current research into the application of these technologies has yielded positive results, they have tended to focus on single database tasks or on isolated single user requests. This paper uses SHEPARD, a framework for managing accelerated tasks across shared heterogeneous resources, to introduce acceleration into an IMDB. Results show how, using SHEPARD, multiple simultaneous user queries all receive speed-up by using a shared pool of accelerators. Results also show that offloading analytic tasks onto accelerators can have indirect benefits for other database workloads by reducing contention for CPU resources.

Does final demand for energy in Portugal exhibit long memory

In this paper, we measure the degree of fractional integration in final energy demand in Portugal using an ARFIMA model with and without adjustments for seasonality. We consider aggregate energy demand as well as final demand for petroleum, electricity, coal, and natural gas. Our findings suggest the presence of long memory in all of the energy demand variables, that the series are stationary, although the mean reversion process will be slower than in the typical short run processes. These results have important implications for the design of energy policies. The effects of temporary policy shocks on final energy demand will tend to disappear slowly. This means that even transitory shocks have long lasting effects. Given the temporary nature of these effects, however, permanent effects require permanent policies. This is unlike what would be suggested by the more standard but much more limited unit root approach, which would incorrectly indicate that even transitory policies would have permanent effects.

Present, imagination and memory in Zakes Mda and Mia Couto

Apesar de marcadas por contextos históricos e culturais distintos, é possível observar nas obras de dois dos autores mais significativos da África do Sul e de Moçambique, Zakes Mda e Mia Couto respectivamente, perspectivas semelhantes no que diz respeito à recuperação das memórias históricoculturais e à sua contribuição para a construção e compreensão das identidades pós-coloniais. Através da ficção, Zakes Mda e Mia Couto combinam a ligação da História a factos concretos com a necessidade de revelação associada à memória, criando assim espaços importantes para a discussão de algumas das mais complexas questões colocadas às identidades pós-coloniais. Para além dos contextos políticos, culturais e históricos que caracterizam e distinguem as literaturas sul-africana e moçambicana, tanto Zakes Mda como Mia Couto assumem nas suas obras a necessidade de analisar as identidades pós-coloniais contemporâneas dos dois países através da recuperação das suas memórias históricas.

Ferroelectric : CNTs structures fabrication for advanced functional nano devices

This work is about the combination of functional ferroelectric oxides with Multiwall Carbon Nanotubes for microelectronic applications, as for example potential 3 Dimensional (3D) Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Miniaturized electronics are ubiquitous now. The drive to downsize electronics has been spurred by needs of more performance into smaller packages at lower costs. But the trend of electronics miniaturization challenges board assembly materials, processes, and reliability. Semiconductor device and integrated circuit technology, coupled with its associated electronic packaging, forms the backbone of high-performance miniaturized electronic systems. However, as size decreases and functionalization increases in the modern electronics further size reduction is getting difficult; below a size limit the signal reliability and device performance deteriorate. Hence miniaturization of siliconbased electronics has limitations. On this background the Road Map for Semiconductor Industry (ITRS) suggests since 2011 alternative technologies, designated as More than Moore; being one of them based on carbon (carbon nanotubes (CNTs) and graphene) [1]. CNTs with their unique performance and three dimensionality at the nano-scale have been regarded as promising elements for miniaturized electronics [2]. CNTs are tubular in geometry and possess a unique set of properties, including ballistic electron transportation and a huge current caring capacity, which make them of great interest for future microelectronics [2]. Indeed CNTs might have a key role in the miniaturization of Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Moving from a traditional two dimensional (2D) design (as is the case of thin films) to a 3D structure (based on a tridimensional arrangement of unidimensional structures) will result in the high reliability and sensing of the signals due to the large contribution from the bottom electrode. One way to achieve this 3D design is by using CNTs. Ferroelectrics (FE) are spontaneously polarized and can have high dielectric constants and interesting pyroelectric, piezoelectric, and electrooptic properties, being a key application of FE electronic memories. However, combining CNTs with FE functional oxides is challenging. It starts with materials compatibility, since crystallization temperature of FE and oxidation temperature of CNTs may overlap. In this case low temperature processing of FE is fundamental. Within this context in this work a systematic study on the fabrication of CNTs - FE structures using low cost low temperature methods was carried out. The FE under study are comprised of lead zirconate titanate (Pb1-xZrxTiO3, PZT), barium titanate (BaTiO3, BT) and bismuth ferrite (BiFeO3, BFO). The various aspects related to the fabrication, such as effect on thermal stability of MWCNTs, FE phase formation in presence of MWCNTs and interfaces between the CNTs/FE are addressed in this work. The ferroelectric response locally measured by Piezoresponse Force Microscopy (PFM) clearly evidenced that even at low processing temperatures FE on CNTs retain its ferroelectric nature. The work started by verifying the thermal decomposition behavior under different conditions of the multiwall CNTs (MWCNTs) used in this work. It was verified that purified MWCNTs are stable up to 420 ºC in air, as no weight loss occurs under non isothermal conditions, but morphology changes were observed for isothermal conditions at 400 ºC by Raman spectroscopy and Transmission Electron Microscopy (TEM). In oxygen-rich atmosphere MWCNTs started to oxidized at 200 ºC. However in argon-rich one and under a high heating rate MWCNTs remain stable up to 1300 ºC with a minimum sublimation. The activation energy for the decomposition of MWCNTs in air was calculated to lie between 80 and 108 kJ/mol. These results are relevant for the fabrication of MWCNTs – FE structures. Indeed we demonstrate that PZT can be deposited by sol gel at low temperatures on MWCNTs. And particularly interesting we prove that MWCNTs decrease the temperature and time for formation of PZT by ~100 ºC commensurate with a decrease in activation energy from 68±15 kJ/mol to 27±2 kJ/mol. As a consequence, monophasic PZT was obtained at 575 ºC for MWCNTs - PZT whereas for pure PZT traces of pyrochlore were still present at 650 ºC, where PZT phase formed due to homogeneous nucleation. The piezoelectric nature of MWCNTs - PZT synthesised at 500 ºC for 1 h was proved by PFM. In the continuation of this work we developed a low cost methodology of coating MWCNTs using a hybrid sol-gel / hydrothermal method. In this case the FE used as a proof of concept was BT. BT is a well-known lead free perovskite used in many microelectronic applications. However, synthesis by solid state reaction is typically performed around 1100 to 1300 ºC what jeopardizes the combination with MWCNTs. We also illustrate the ineffectiveness of conventional hydrothermal synthesis in this process due the formation of carbonates, namely BaCO3. The grown MWCNTs - BT structures are ferroelectric and exhibit an electromechanical response (15 pm/V). These results have broad implications since this strategy can also be extended to other compounds of materials with high crystallization temperatures. In addition the coverage of MWCNTs with FE can be optimized, in this case with non covalent functionalization of the tubes, namely with sodium dodecyl sulfate (SDS). MWCNTs were used as templates to grow, in this case single phase multiferroic BFO nanorods. This work shows that the use of nitric solvent results in severe damages of the MWCNTs layers that results in the early oxidation of the tubes during the annealing treatment. It was also observed that the use of nitric solvent results in the partial filling of MWCNTs with BFO due to the low surface tension (<119 mN/m) of the nitric solution. The opening of the caps and filling of the tubes occurs simultaneously during the refluxing step. Furthermore we verified that MWCNTs have a critical role in the fabrication of monophasic BFO; i.e. the oxidation of CNTs during the annealing process causes an oxygen deficient atmosphere that restrains the formation of Bi2O3 and monophasic BFO can be obtained. The morphology of the obtained BFO nano structures indicates that MWCNTs act as template to grow 1D structure of BFO. Magnetic measurements on these BFO nanostructures revealed a week ferromagnetic hysteresis loop with a coercive field of 956 Oe at 5 K. We also exploited the possible use of vertically-aligned multiwall carbon nanotubes (VA-MWCNTs) as bottom electrodes for microelectronics, for example for memory applications. As a proof of concept BiFeO3 (BFO) films were in-situ deposited on the surface of VA-MWCNTs by RF (Radio Frequency) magnetron sputtering. For in situ deposition temperature of 400 ºC and deposition time up to 2 h, BFO films cover the VA-MWCNTs and no damage occurs either in the film or MWCNTs. In spite of the macroscopic lossy polarization behaviour, the ferroelectric nature, domain structure and switching of these conformal BFO films was verified by PFM. A week ferromagnetic ordering loop was proved for BFO films on VA-MWCNTs having a coercive field of 700 Oe. Our systematic work is a significant step forward in the development of 3D memory cells; it clearly demonstrates that CNTs can be combined with FE oxides and can be used, for example, as the next 3D generation of FERAMs, not excluding however other different applications in microelectronics.

Narrative Personae and Visual Signs: Reading Leonard’s intimate photo-memoir. a/b: Auto/Biography Studies.

: In this paper, I look at Joanne Leonard’s Being in Pictures and engage in a critical dialogue with an assemblage of visual and textual narratives that comprise her intimate photo memoir. In doing this I draw on Hannah Arendt’s take on narratives as tangible traces of uniqueness and plurality, political traits par excellence in the cultural histories of the human condition. Being aware of my role as a reader/viewer/interpreter of a woman artist’s auto/biographical narratives, I move beyond dilemmas of representation or questions of unveiling “the real Leonard”. The artist is instead configured as a narrative persona, whose narratives respond to three interrelated themes of inquiry, namely the visualization of spatial technologies, vulnerability and the gendering of memory. Key words: gendered memories, narrative persona, spatial technologies, photo memoir, vulnerability

The work of memory: embodiment, materiality and home in Jeanne Bouvier’s autobiographical writings

In this paper I follow trails in the memory of work by reading the books and papers of Jeanne Bouvier, a French seamstress, ardent trade-unionist and passionate writer, who left a rich body of labour literature including four published historical studies, as well as the memoirs of her life, work and struggles. Work, action and creativity are three interrelated planes on which Bouvier situates herself, while memory and imagination are interwoven in the way she seeks to understand herself in the world with others. What emerges as a particularly striking theme from Bouvier’s papers is a material matrix of mnemonic and imaginary practices, wherein bodies, places and objects are entangled in the narrative constitution of the self of the woman worker/writer.

Le rapport aux traces écrites en situation d'évaluation de lecture de textes narratifs brefs le cas d'élèves au deuxième cycle du secondaire

La présente recherche porte sur les traces écrites laissées par des élèves de quatrième secondaire sur leur texte en situation de préparation à une évaluation sommative. Compte tenu des milieux d'où ils proviennent et de leurs connaissances antérieures, force est de constater que les compétences en lecture de ces élèves sont très variables et ont des conséquences importantes non seulement dans leur cours de français, mais aussi dans toutes les autres matières: plus les élèves avancent dans leur cheminement scolaire, plus les enseignants leur demandent de lire des textes longs et complexes. Pourtant, force est de constater que les résultats en lecture des élèves de quatrième et cinquième secondaire restent faibles. De nombreuses études ont démontré que la lecture de textes narratifs mobilise tous les aspects de la lecture et augmente les compétences générales à lire. Pour les enseignants de français, une façon courante d'évaluer la lecture au deuxième cycle du secondaire est donc de distribuer un texte narratif bref (conte, nouvelle, extrait de roman) à l'avance aux élèves et de leur suggérer d'y laisser des traces écrites de leur réflexion ou des stratégies utilisées, dans le but de favoriser leur compréhension et leur interprétation du texte. Ces traces peuvent prendre la forme, par exemple, de soulignements, de surlignements, d'annotations dans les marges, de schémas. Toutefois, peu de recherches scientifiques se sont attardées aux opinions, aux conceptions et aux pratiques des élèves lorsqu'il s'agit de se préparer à une évaluation de la sorte. Notre recherche, exploratoire et descriptive, vise deux objectifs spécifiques: premièrement, décrire l'investissement, les opinions et attitudes, les conceptions et le mode d'investissement d'élèves de quatrième secondaire et, deuxièmement, décrire les relations entre ces quatre dimensions afin de dresser un portrait global du rapport des élèves aux traces écrites lors de leur préparation à une évaluation de lecture. Pour ce faire, nous avons privilégié une collecte de données en trois phases: après avoir passé, à un échantillon de 41 élèves volontaires, des questionnaires présentant des items à coter sur une échelle de Likert, nous avons observé les textes sur lesquels des traces de leur travail de préparation étaient visibles. Pour finir, nous avons rencontré quatre de ces élèves en entrevue semi-dirigées, choisis en fonction de leurs réponses aux questionnaires et du type de traces qu'ils avaient laissées. Pour augmenter la validité des résultats, les données recueillies à chacune des phases [ont] été croisées afin d'obtenir un maximum d'informations sur le rapport des élèves aux traces écrites. Les résultats obtenus montrent que, malgré le fait que les élèves ont des perceptions généralement assez positives du recours aux traces écrites, les traces qu'ils laissent généralement sur leurs textes sont peu pertinentes dans la mesure où elles ne contribuent pas, pour la plupart, à établir des liens essentiels à la compréhension globale du texte narratif, comme les liens de causalité. Les entrevues nous apprennent que certains élèves ont effectivement l'impression que certaines traces écrites sont plus pertinentes que d'autres, mais qu'ils ignorent souvent lesquelles et comment y recourir pendant leur lecture. Le rapport aux traces écrites est complexe, dépend de la situation et varie d'un individu à l'autre en fonction de plusieurs facteurs contextuels: les expériences et connaissances antérieures de l'élève, la résistance du texte imposé et les contacts avec les pairs. Tous ces facteurs influencent l'élève dans ce qu'il pense, ce qu'il ressent et ce qu'il fait lors de la préparation à une évaluation de lecture.

Electrical characterization of metal-oxide-polymer devices for non-volatile memory applications

The objective of this thesis is to study the properties of resistive switching effect based on bistable resistive memory which is fabricated in the form of Al2O3/polymer diodes and to contribute to the elucidation of resistive switching mechanisms. Resistive memories were characterized using a variety of electrical techniques, including current-voltage measurements, small-signal impedance, and electrical noise based techniques. All the measurements were carried out over a large temperature range. Fast voltage ramps were used to elucidate the dynamic response of the memory to rapid varying electric fields. The temperature dependence of the current provided insight into the role of trapped charges in resistive switching. The analysis of fast current fluctuations using electric noise techniques contributed to the elucidation of the kinetics involved in filament formation/rupture, the filament size and correspondent current capabilities. The results reported in this thesis provide insight into a number of issues namely: (i) The fundamental limitations on the speed of operation of a bi-layer resistive memory are the time and voltage dependences of the switch-on mechanism. (ii) The results explain the wide spread in switching times reported in the literature and the apparently anomalous behaviour of the high conductance state namely the disappearance of the negative differential resistance region at high voltage scan rates which is commonly attributed to a “dead time” phenomenon which had remained elusive since it was first reported in the ‘60s. (iii) Assuming that the current is filamentary, Comsol simulations were performed and used to explain the observed dynamic properties of the current-voltage characteristics. Furthermore, the simulations suggest that filaments can interact with each other. (iv) The current-voltage characteristics have been studied as a function of temperature. The findings indicate that creation and annihilation of filaments is controlled by filling and neutralizing traps localized at the oxide/polymer interface. (v) Resistive switching was also studied in small-molecule OLEDs. It was shown that the degradation that leads to a loss of light output during operation is caused by the presence of a resistive switching layer. A diagnostic tool that predicts premature failure of OLEDs was devised and proposed. Resistive switching is a property of oxides. These layers can grow in a number of devices including, organic light emitting diodes (OLEDs), spin-valve transistors and photovoltaic devices fabricated in different types of material. Under strong electric fields the oxides can undergo dielectric breakdown and become resistive switching layers. Resistive switching strongly modifies the charge injection causing a number of deleterious effects and eventually device failure. In this respect the findings in this thesis are relevant to understand reliability issues in devices across a very broad field.

Joaquim Rodrigo:a contínua reinvenção da pintura

Tese de doutoramento, História (História da Arte), Universidade de Lisboa, Faculdade de Letras, 2014