Offset-print mottling measurement using machine vision

Mottling is one of the key defects in offset-printing. Mottling can be defined as unwanted unevenness of print. In this work, diameter of a mottle spot is defined between 0.5-10.0 mm. There are several types of mottling, but the reason behind the problem is still not fully understood. Several commercial machine vision products for the evaluation of print unevenness have been presented. Two of these methods used in these products have been implemented in this thesis. The one is the cluster method and the other is the band-pass method. The properties of human vision system have been taken into account in the implementation of these two methods. An index produced by the cluster method is a weighted sum of the number of found spots, and an index produced by band-pass method is a weighted sum of coefficients of variations of gray-levels for each spatial band. Both methods produce larger indices for visually poor samples, so they can discern good samples from the poor ones. The difference between the indices for good and poor samples is slightly larger produced by the cluster method. 11 However, without the samples evaluated by human experts, the goodness of these results is still questionable. This comparison will be left to the next phase of the project.

The high-speed induction motor: calculating the effects of solid-rotor material on machine characteristics

A method for the analysis of high-speed solid-rotor induction motors in presented. The analysis is based on a new combination of the three dimensional linear method and the transfer matrix method. Both saturation and finite length effects are taken into account. The active region of the solid rotor is divided into saturated and unsaturated parts. The time dependence is assumed to be sinusoidal and phasor quantities are used in the solution. The method is applied to the calculation of smooth solid rotors manufactured of different materials. Six rotor materials are tested: three construction steels, pure iron, a cobaltiron alloy and an aluminium alloy. The results obtained by the method agree fairly well with the measurement quantities.

Versatility of field theory motivated nuclear effective Lagrangian approach

We analyze the results for infinite nuclear and neutron matter using the standard relativistic mean field model and its recent effective field theory motivated generalization. For the first time, we show quantitatively that the inclusion in the effective theory of vector meson self-interactions and scalar-vector cross-interactions explains naturally the recent experimental observations of the softness of the nuclear equation of state, without losing the advantages of the standard relativistic model for finite nuclei.

High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design

Within the latest decade high-speed motor technology has been increasingly commonly applied within the range of medium and large power. More particularly, applications like such involved with gas movement and compression seem to be the most important area in which high-speed machines are used. In manufacturing the induction motor rotor core of one single piece of steel it is possible to achieve an extremely rigid rotor construction for the high-speed motor. In a mechanical sense, the solid rotor may be the best possible rotor construction. Unfortunately, the electromagnetic properties of a solid rotor are poorer than the properties of the traditional laminated rotor of an induction motor. This thesis analyses methods for improving the electromagnetic properties of a solid-rotor induction machine. The slip of the solid rotor is reduced notably if the solid rotor is axially slitted. The slitting patterns of the solid rotor are examined. It is shown how the slitting parameters affect the produced torque. Methods for decreasing the harmonic eddy currents on the surface of the rotor are also examined. The motivation for this is to improve the efficiency of the motor to reach the efficiency standard of a laminated rotor induction motor. To carry out these research tasks the finite element analysis is used. An analytical calculation of solid rotors based on the multi-layer transfer-matrix method is developed especially for the calculation of axially slitted solid rotors equipped with wellconducting end rings. The calculation results are verified by using the finite element analysis and laboratory measurements. The prototype motors of 250 – 300 kW and 140 Hz were tested to verify the results. Utilization factor data are given for several other prototypes the largest of which delivers 1000 kW at 12000 min-1.

Theory of mind impairment in patients with behavioural variant fronto-temporal dementia (bv-FTD) increases caregiver burden.

BACKGROUND: Theory of mind (ToM), the capacity to infer the intention, beliefs and emotional states of others, is frequently impaired in behavioural variant fronto-temporal dementia patients (bv-FTDp); however, its impact on caregiver burden is unexplored. SETTING: National Institute of Neurological Disorders and Stroke, National Institutes of Health. SUBJECTS: bv-FTDp (n = 28), a subgroup of their caregivers (n = 20) and healthy controls (n = 32). METHODS: we applied a faux-pas (FP) task as a ToM measure in bv-FTDp and healthy controls and the Zarit Burden Interview as a measure of burden in patients' caregivers. Patients underwent structural MRI; we used voxel-based morphometry to examine relationships between regional atrophy and ToM impairment and caregiver burden. RESULTS: FP task performance was impaired in bv-FTDp and negatively associated with caregiver burden. Atrophy was found in areas involved in ToM. Caregiver burden increased with greater atrophy in left lateral premotor cortex, a region associated in animal models with the presence of mirror neurons, possibly involved in empathy. CONCLUSION: ToM impairment in bv-FTDp is associated with increased caregiver burden.

Could machine learning improve the prediction of pelvic nodal status of prostate cancer patients? Preliminary results of a pilot study.

We tested and compared performances of Roach formula, Partin tables and of three Machine Learning (ML) based algorithms based on decision trees in identifying N+ prostate cancer (PC). 1,555 cN0 and 50 cN+ PC were analyzed. Results were also verified on an independent population of 204 operated cN0 patients, with a known pN status (187 pN0, 17 pN1 patients). ML performed better, also when tested on the surgical population, with accuracy, specificity, and sensitivity ranging between 48-86%, 35-91%, and 17-79%, respectively. ML potentially allows better prediction of the nodal status of PC, potentially allowing a better tailoring of pelvic irradiation.

Brightness of multilayer boards

A good appearance of a package enhances the sale of the product. The packing gives information about the content and instructions for the usage. In this master’s thesis, the optical properties of multilayer packaging board is studied. Especially means of increasing brightness of the multilayer board are evaluated. In the literature part, the effect of different factors on optical properties of a multilayer board are evaluated with the help of light scattering and absorption coefficients. The Kubelka-Munk theory can be used also in modelling brightness of the multilayer board. A large variety of different process factors, chemical aids and machine variables affect optical properties of board. In the experimental part, different methods to increase brightness of a 3-layer board were evaluated. It was discovered that brightness variation of broke (30 % share of the center layer pulp) have only minor influence on brightness of the board. The brightness variation must be high, roughly 9 % in order to alter brightness of the board by 1 %. Higher brightness can be achieved by bleaching the pulp, which holds the largest share of the center layer pulp. Here, 2,6 % increase in brightness of the pulp (60 % share of the center layer pulp) increased brightness of the board by 1 %. In a trial run at a board machine, there was no indication of decreased bulk of the board due to extended bleaching of the pulp. With pulp dyeing appearance and optical properties of a multilayer board can be influenced. By using bluish dyes the natural yellowness of pulps can be decreased and impression of whiteness is then increased. Brightness may deteriorate though, because of increasing light absorption of the dyed pulps. When the yellowness comes from the center layer pulp, the dye should be introduced there. Then the brightness decreasing effect of the dye decreases brightness of the board less. It was noticed that it is more important to maintain brightness of the top layer than brightness of the center layer, because the top layer pulp affects on brightness of the board the most. By introducing fillers into the top layer of a multilayer board it is possible to increase brightness of the board. Fillers with the highest light scattering increased the brightness of the board the most. Increasing light scattering increases brightness and also opacity. Higher opacity in the top layer decreases also the darkening effect of the center layer. Calcinated kaolin and PCC was found to increase the light scattering of the top layer the most at the filler comparison. Introducing fillers into the top layer of multilayer board may decrease bulk and modulus of elasticity of the top layer. This could lead to deteriorated bending stiffness.

Radanohjaimen suunnittelu leveille päällystyskoneille

Radanohjaimia käytetään radan poikkisuuntaiseen paikoitukseen sekä oskillointiin ja ne ovat osa paperinvalmistuslinjojen radanhallintajärjestelmiä. Oikein suunnitellulla ja sijoitetulla radanohjaimella voidaan estää haitallisten ratasiirtymien esiintyminen, pienentää hylkymateriaalin määrää sekä parantaa rullauksen laatua. Ohjausperiaatteet sekä niihin liittyvä laitetekniikka on tunnettu jo vuosikymmenten ajan, joskin todelliset radanohjaustarpeet ja -laitteet ovat tähän asti rajoittuneet paino-, tekstiili- ja metalliteollisuudessa käytössä oleville kapeille radoille. Tämän työn tavoitteena oli selvittää 5… 12 metriä leveälle, modernissa päällystyskoneessa kulkevalle paperiradalle soveltuvat ohjausperiaatteet sekä muodostaa radan todennäköisimpiin vauriomuotoihin perustuvat suunnittelukriteerit kahdelle erityyppiselle ohjainkonstruktiolle. Yksitelainen, taivuttava radanohjain soveltuu kohteisiin, joissa ohjainta edeltää suhteellisen pitkä vapaa ratavienti. Kaksitelainen, taittava radanohjain on puolestaan sijoitettavissa huomattavasti lyhyempään ratavientiin. Radanohjauksen teoria pohjautuu pitävän telan ja radan väliseen kohtisuoran tulokulman periaatteeseen, jonka perusteella mikä tahansa yhdensuuntaisuuspoikkeama kahden telan välillä johtaa radan poikkisuuntaiseen siirtymään. Tämän periaatteen pohjalta voidaan dynaamista ohjaustilannetta approksimoida staattisin menetelmin sekä muodostaa kireysmuutoksiin ja aaltoiluun perustuvat geometrian mitoitusperiaatteet ohjaimen ympäristön ratavienneille. Nopean ohjauksen toteutus edellyttää radanohjaimen liikkeen olevan nivelen ympäri tapahtuvaa yhdistettyä translaatio- ja rotaatioliikettä. Ohjainkonstruktiot suunnitellaan siten, että teorian mukaiset optimaaliset liikeradat toteutuvat vaaditulla ohjausnopeudella. Suunnittelua ohjaavat tuotteille asetetut lujuus- ja värähtelykriteerit sekä aiheeseen liittyvät koneturvallisuusstandardit. Konstruointi suoritetaan järjestelmällisen tuotesuunnitteluprosessin vaiheiden ja menetelmien mukaisesti.

What can ecosystems learn? Expanding evolutionary ecology with learning theory.

BACKGROUND: The structure and organisation of ecological interactions within an ecosystem is modified by the evolution and coevolution of the individual species it contains. Understanding how historical conditions have shaped this architecture is vital for understanding system responses to change at scales from the microbial upwards. However, in the absence of a group selection process, the collective behaviours and ecosystem functions exhibited by the whole community cannot be organised or adapted in a Darwinian sense. A long-standing open question thus persists: Are there alternative organising principles that enable us to understand and predict how the coevolution of the component species creates and maintains complex collective behaviours exhibited by the ecosystem as a whole? RESULTS: Here we answer this question by incorporating principles from connectionist learning, a previously unrelated discipline already using well-developed theories on how emergent behaviours arise in simple networks. Specifically, we show conditions where natural selection on ecological interactions is functionally equivalent to a simple type of connectionist learning, 'unsupervised learning', well-known in neural-network models of cognitive systems to produce many non-trivial collective behaviours. Accordingly, we find that a community can self-organise in a well-defined and non-trivial sense without selection at the community level; its organisation can be conditioned by past experience in the same sense as connectionist learning models habituate to stimuli. This conditioning drives the community to form a distributed ecological memory of multiple past states, causing the community to: a) converge to these states from any random initial composition; b) accurately restore historical compositions from small fragments; c) recover a state composition following disturbance; and d) to correctly classify ambiguous initial compositions according to their similarity to learned compositions. We examine how the formation of alternative stable states alters the community's response to changing environmental forcing, and we identify conditions under which the ecosystem exhibits hysteresis with potential for catastrophic regime shifts. CONCLUSIONS: This work highlights the potential of connectionist theory to expand our understanding of evo-eco dynamics and collective ecological behaviours. Within this framework we find that, despite not being a Darwinian unit, ecological communities can behave like connectionist learning systems, creating internal conditions that habituate to past environmental conditions and actively recalling those conditions. REVIEWERS: This article was reviewed by Prof. Ricard V Solé, Universitat Pompeu Fabra, Barcelona and Prof. Rob Knight, University of Colorado, Boulder.

Handbook of life design : from practice to theory and from theory to practice

Our lives and careers are becoming ever more unpredictable. The "life-design paradigm" described in detail in this ground-breaking handbook helps counselors and others meet people's increasing need to develop and manage their own lives and careers. Life-design interventions, suited to a wide variety of cultural settings, help individuals become actors in their own lives and careers by activating, stimulating, and developing their personal resources. This handbook first addresses life-design theory, then shows how to apply life designing to different age groups and with more at-risk people, and looks at how to train life-design counselors

Design of flywheel generator for a diesel hybrid working machine

The aim of this work is to design a flywheel generator for a diesel hybrid working machine. In this work we perform detailed design of a generator. Mobile machines are commonly used in industry: road building machines, three harvesting machines, boring machines, trucks and other equipment. These machines work with a hydraulic drive system. This system provides good service property and high technical level. Manufacturers of mobile machines tend to satisfy all requirements of customers and modernized drive system. In this work also a description of the frequency inverter is present. Power electronics system is one of the basic parts for structures perform in the project.