Decomposing school and school-type efficiency

This paper puts forward a Data Envelopment Analysis (DEA) approach to decomposing a pupil's under-attainment at school. Under-attainment is attributed to the pupil, the school and the type of funding regime under which the school operates. A pupil-level analysis is used firstly on a within school and secondly on a between school basis, grouping schools by type such as state-funded, independent and so on. Overall measures of each pupil's efficiency are thus disentangled into pupil, school and school-type efficiencies. This approach provides schools with a set of efficiency measures, each one conveying different information. © 2001 Elsevier Science B.V.

21-residue peptide's dynamics at and between elementary structural transitions

Elementary conformational changes of the backbone of a 21-residue peptide A5(A3RA)3A are studied using molecular dynamics simulations in explicit water. The processes of the conformational transitions and the regimes of stationary fluctuations between them are investigated using minimal perturbations of the system. The perturbations consist of a few degrees rotation of the velocity of one of the systems' atoms and keep the system on the same energy surface. It is found that (i) the system dynamics is insignificantly changed by the perturbations in the regimes between the transitions; (ii) it is very sensitive to the perturbations just before the transitions that prevents the peptide from making the transitions; and (iii) the perturbation of any atom of the system, including distant water molecules is equally effective in preventing the transition. The latter implies strongly collective dynamics of the peptide and water during the transitions.

Knowledge acquisition in international strategic alliances among Malaysian manufacturing firms

This thesis examines the process of knowledge acquisition by Malaysian manufacturing firms through their involvement in international strategic alliances. The strategic alliances can be with or without equity involvement. Firms involved with a foreign partner with equity involvement are joint venture firms while non-equity involvement are firms that engaged in contractual agreements. Using empirical evidence from 65 international alliances gathered through a survey conducted in high-technology manufacturing sectors, several factors that influence the process of knowledge acquisition are examined. The factors are: learning capacity, experience, goals, active involvement and accessibility to the foreign knowledge. Censored regression analysis and ordered probit analysis are used to analyse the effects of these factors on knowledge acquisition and its determinant parts, and the effects of knowledge acquisition and its determinants on the performance of the alliances. A second questionnaire gathered evidence relating to the factors, which encouraged tacit knowledge transfer between the foreign and Malaysian partners in international alliances. The key findings of the study are: knowledge acquisition in international strategic alliances is influenced by five determining factors; learning capacity, experience, articulated goals, active involvement and accessibility; new technology knowledge, product development knowledge and manufacturing process knowledge are influenced differently by the determining factors; knowledge acquisition and its determinant factors have a significant impact on the firm’s performance; cultural differences tend to moderate the effect on the firm’s performance; acquiring tacit knowledge is not only influenced by the five determinant factors but also by other factors, such as dependency, accessibility, trust, manufacturing control, learning methods and organisational systems; Malaysian firms involved in joint ventures tend to acquire more knowledge than those involved in contractual agreements, but joint ventures also exhibit higher degrees of dependency than contractual agreements; and the presence of R&D activity in the Malaysian partner encourages knowledge acquisition, but the amount of R&D expenditure has no effect on knowledge acquisition.

A combinatorial approach to the chemical synthesis and biological evaluation of 3,4,5-trisubstiituted furan-2(5H)-ones

Many important natural products contain the furan-2(5H)-one structure. The structure of this molecule lends itself to manipulation using combinatorial techniques due to the presence of more than one site for the attachment of different suhstituents. By developing different reaction schemes at the three sites available for attachment on the furan-2(5H)-one scaffold, combinatorial chemistry techniques can be employed to assemble libraries of novel furan 2(5H)-ones. These libraries can then be entered into various biological screening programmes. This approach will enable a vast diversity or compounds to be examined, in the hope or finding new biologically active Iead structures. The work in this thesis has investigated the potential that combinatorial chemistry has in the quest for new biologically active lead structures based on the furan-2(5H)-one structure. Different reactions were investigated with respect to their suitability for inclusion in a library. Once sets of reactions at the various sites had been established, the viability of these reactions in the assembly of combinatorial libraries was investigated. Purification methods were developed, and the purified products entered into suitable biological screening tests. Results from some of these tests were optimised using structure activity relationships, and the resulting products re-screened. The screening tests performed were for anticancer and antimicrobial activity, cholecystokinin (CCK-B) antagonism and anti-inflammatory activity (in the quest for novel cyclo-oxygenase (COX-2) selective non-steroidal anti-inflammatory drugs). It has been shown that many reactions undergone by the furan-2(5H)-one structure are suitable for the assembly of a combinatorial library. Investigation into the assembly of different libraries has been carried out with initial screening results included. From this work, further investigation into combinatorial library assembly and structure activity relationships of screened reaction products can be undertaken.

Properties and performance of polymer modified cements and mortars

Polymer modified cements and mortars have become popular for use as patch repair materials. General evidence suggests that these materials offer considerable improvements compared to traditional mortars although the mechanisms for this are not fully understood. This work elucidates the factors which govern some properties and performance of different polymer systems. In view of the wide range of commercial systems available, investigations concentrated on the use of three of the most commonly available groups of polymers. These were: (1) Styrene Butadiene Rubber (SBR), (2) Acrylics and, (3) Ethylene Vinyl Acetates (EVA). The later two were in the form of both emulsions and redispersible powders. Experiments concentrated on: (1) Rheological behaviour of polymer modified cement pastes; (2) Workability of polymer modified mortars; (3) Influence of curing conditions on the pore size distribution and diffusion of chloride ions; (4) Bond strength of polymer modified cement and mortar patches; and (5) Microscopic examination and semi-quantitative analyses of the bulk and interfacial microstructures. The following main conclusions were reached: (1) The addition of polymer emulsions have a considerable influence on the workability of fresh cement pastes, the extent of this depending on the type of system used. (2) The rheological parameters of fresh polymer modified mortars can be established using a two-point workability test which may be used when comparing the properties of different systems at constant workability. (3) Curing conditions affect the properties of polymer modified systems and a wet/dry curing regime was essential for good adhesion of these materials to mortar substrates. (4) In contrast, the wet/dry curing regime resulted in a curing affected zone at the surface of patch materials. This can result in a much coarser pore structure and enhanced diffusion of e.g. chloride ions. (5) The microstructure of polymer modified systems was very different compared with the unmodified cement/mortar and varied depending on curing conditions.

Energy saving and solar electricity in fan-ventilated greenhouses

Greenhouse cultivation is an energy intensive process therefore it is worthwhile to introduce energy saving measures and alternative energy sources. Here we show that there is scope for energy saving in fan ventilated greenhouses. Measurements of electricity usage as a function of fan speed have been performed for two models of 1.25 m diameter greenhouse fans and compared to theoretical values. Reducing the speed can cut the energy usage per volume of air moved by more than 70%. To minimize the capital cost of low-speed operation, a cooled greenhouse has been built in which the fan speed responds to sunlight such that full speed is reached only around noon. The energy saving is about 40% compared to constant speed operation. Direct operation of fans from solar-photovoltaic modules is also viable as shown from experiments with a fan driven by a brushless DC motor. On comparing the Net Present Value costs of the different systems over a 10 year amortization period (with and without a carbon tax to represent environmental costs) we find that sunlight-controlled system saves money under all assumptions about taxation and discount rates. The solar-powered system, however, is only profitable for very low discount rates, due to the high initial capital costs. Nonetheless this system could be of interest for its reliability in developing countries where mains electricity is intermittent. We recommend that greenhouse fan manufacturers improve the availability of energy-saving designs such as those described here.

Fabrication of high quality optical coherence tomography (OCT) calibration artefacts using femtosecond inscription

Optical coherence tomography (OCT) is a non-invasive three-dimensional imaging system that is capable of producing high resolution in-vivo images. OCT is approved for use in clinical trials in Japan, USA and Europe. For OCT to be used effectively in a clinical diagnosis, a method of standardisation is required to assess the performance across different systems. This standardisation can be implemented using highly accurate and reproducible artefacts for calibration at both installation and throughout the lifetime of a system. Femtosecond lasers can write highly reproducible and highly localised micro-structured calibration artefacts within a transparent media. We report on the fabrication of high quality OCT calibration artefacts in fused silica using a femtosecond laser. The calibration artefacts were written in fused silica due to its high purity and ability to withstand high energy femtosecond pulses. An Amplitude Systemes s-Pulse Yb:YAG femtosecond laser with an operating wavelength of 1026 nm was used to inscribe three dimensional patterns within the highly optically transmissive substrate. Four unique artefacts have been designed to measure a wide variety of parameters, including the points spread function (PSF), modulation transfer function (MTF), sensitivity, distortion and resolution - key parameters which define the performance of the OCT. The calibration artefacts have been characterised using an optical microscope and tested on a swept source OCT. The results demonstrate that the femtosecond laser inscribed artefacts have the potential of quantitatively and qualitatively validating the performance of any OCT system.

Measuring economies of horizontal and vertical integration in the US electric power industry:how costly is unbundling?

This research employs econometric analysis on a cross section of American electricity companies in order to study the cost implications associated with unbundling the operations of integrated companies into vertically and/or horizontally separated companies. Focusing on the representative sample average firm, we find that complete horizontal and vertical disintegration resulting in the creation of separate nuclear, conventional, and hydro electric generation companies as well as a separate firm distributing power to final consumers, results in a statistically significant 13.5 percent increase in costs. Maintaining a horizontally integrated generator producing nuclear, conventional, and hydro electric generation while imposing vertical separation by creating a stand alone distribution company, results in a lower but still substantial and statistically significant cost penalty amounting to an 8.1 % increase in costs relative to a fully integrated structure. As these results imply that a vertically separated but horizontally integrated generation firm would need to reduce the costs of generation by 11% just to recoup the cost increases associated with vertical separation, even the costs associated with just vertical unbundling are quite substantial. Our paper is also the first academic paper we are aware of that systematically considers the impact of generation mix on vertical, horizontal, and overall scope economies. As a result, we are able to demonstrate that the estimated cost of unbundling in the electricity sector is substantially influenced by generation mix. Thus, for example, we find evidence of strong vertical integration economies between nuclear and conventional generation, but little evidence for vertical integration benefits between hydro generation and the distribution of power. In contrast, we find strong evidence suggesting the presence of substantial horizontal integration economies associated with the joint production of hydro generation with nuclear and/or conventional fossil fuel generation. These results are significant because they indicate that the cost of unbundling the electricity sector will differ substantially in different systems, meaning that a blanket regulatory policy with regard to the appropriateness of vertical and horizontal unbundling is likely to be inappropriate.

Competitive edge through operations management

A view has emerged within manufacturing and service organizations that the operations management function can hold the key to achieving competitive edge. This has recently been emphasized by the demands for greater variety and higher quality which must be set against a background of increasing cost of resources. As nations' trade barriers are progressively lowered and removed, so producers of goods and service products are becoming more exposed to competition that may come from virtually anywhere around the world. To simply survive in this climate many organizations have found it necessary to improve their manufacturing or service delivery systems. To become real ''winners'' some have adopted a strategic approach to operations and completely reviewed and restructured their approach to production system design and operations planning and control. The articles in this issue of the International journal of Operations & Production Management have been selected to illustrate current thinking and practice in relation to this situation. They are all based on papers presented to the Sixth International Conference of the Operations Management Association-UK which was held at Aston University in June 1991. The theme of the conference was "Achieving Competitive Edge" and authors from 15 countries around the world contributed to more than 80 presented papers. Within this special issue five topic areas are addressed with two articles relating to each. The topics are: strategic management of operations; managing change; production system design; production control; and service operations. Under strategic management of operations De Toni, Filippini and Forza propose a conceptual model which considers the performance of an operating system as a source of competitive advantage through the ''operation value chain'' of design, purchasing, production and distribution. Their model is set within the context of the tendency towards globalization. New's article is somewhat in contrast to the more fashionable literature on operations strategy. It challenges the validity of the current idea of ''world-class manufacturing'' and, instead, urges a reconsideration of the view that strategic ''trade-offs'' are necessary to achieve a competitive edge. The importance of managing change has for some time been recognized within the field of organization studies but its relevance in operations management is now being realized. Berger considers the use of "organization design", ''sociotechnical systems'' and change strategies and contrasts these with the more recent idea of the ''dialogue perspective''. A tentative model is suggested to improve the analysis of different strategies in a situation specific context. Neely and Wilson look at an essential prerequisite if change is to be effected in an efficient way, namely product goal congruence. Using a case study as its basis, their article suggests a method of measuring goal congruence as a means of identifying the extent to which key performance criteria relating to quality, time, cost and flexibility are understood within an organization. The two articles on production systems design represent important contributions to the debate on flexible production organization and autonomous group working. Rosander uses the results from cases to test the applicability of ''flow groups'' as the optimal way of organizing batch production. Schuring also examines cases to determine the reasons behind the adoption of ''autonomous work groups'' in The Netherlands and Sweden. Both these contributions help to provide a greater understanding of the production philosophies which have emerged as alternatives to more conventional systems -------for intermittent and continuous production. The production control articles are both concerned with the concepts of ''push'' and ''pull'' which are the two broad approaches to material planning and control. Hirakawa, Hoshino and Katayama have developed a hybrid model, suitable for multistage manufacturing processes, which combines the benefits of both systems. They discuss the theoretical arguments in support of the system and illustrate its performance with numerical studies. Slack and Correa's concern is with the flexibility characteristics of push and pull material planning and control systems. They use the case of two plants using the different systems to compare their performance within a number of predefined flexibility types. The two final contributions on service operations are complementary. The article by Voss really relates to manufacturing but examines the application of service industry concepts within the UK manufacturing sector. His studies in a number of companies support the idea of the ''service factory'' and offer a new perspective for manufacturing. Harvey's contribution by contrast, is concerned with the application of operations management principles in the delivery of professional services. Using the case of social-service provision in Canada, it demonstrates how concepts such as ''just-in-time'' can be used to improve service performance. The ten articles in this special issue of the journal address a wide range of issues and situations. Their common aspect is that, together, they demonstrate the extent to which competitiveness can be improved via the application of operations management concepts and techniques.

Involving the family in higher education:do they really matter?

In an ever-changing higher education (HE) environment, institutions are seeing the involvement of parents in students' education increasing. This may partly be due to tuition fees and the introduction of deferred variable tuition fees ("top-up fees") from 2006, and also because of the increased number of students choosing to remain in the family home for the duration of their studies. Many students see their families as the most important source of motivation and advice right through from school age to when they make decisions about HE. In the light of this increase in involvement, institutions need to provide information about, and access to, university to ensure that families are fully prepared and able to support their children throughout the university experience. In recognition of the vital role parents play, the Involving the Family project focuses on parents or key family members from groups currently under-represented in HE in order to increase their awareness and understanding of HE. This article evaluates research undertaken to investigate the views, perceptions and key concerns held by minority ethnic parents with regards to their children and participation in HE. The article then details how these results were utilised in the development of the Involving the Family project.

Outsourcing:assessing the risks and benefits for organisations, sectors and nations

Purpose - This research aims to assess the risks and benefits of outsourcing for organisations, sectors and nations. The literature on outsourcing contains little evidence of research on holistic issues of its impact at systems levels beyond the firm, notably sectors and nations. Design/methodology/approach - A Delphi study with senior strategists from private and public sectors captured perspectives and specific observations on benefits and risks of outsourcing. Emergent issues on outsourcing policy, strategy and decision-making processes were synthesised into a framework for analysing factors associated with outsourcing. Findings - The findings suggest that a more holistic view of outsourcing is needed, linking local, organisational issues with sector and national level actions and outcomes. In this way, aggregate risks and benefits can be assessed at different systems levels. Research limitations/implications - Future research might address the motivations for outsourcing; currently there is little research evidence to assess whether outsourcing is a mechanism for failing to solve internal problems, and moving responsibility and risk out of the firm. Additionally most outsourcing research to date has concentrated on an activity either being "in" or "out"; there is little research exploring the circumstances in which mixed models might be appropriate. Practical implications - The framework provides an aid to research and an aide memoire for managers considering outsourcing. Originality/value - This paper contributes to knowledge on understanding of outsourcing at different systems levels, particularly highlighting the implications of outsourcing for sectors and nations. Previously most research has focused at the level of the firm or dyadic relationship. © Emerald Group Publishing Limited.

Parametric study of femtosecond inscription of microstructures for OCT artefact fabrication

As optical coherence tomography (OCT) becomes widespread, validation and characterization of systems becomes important. Reference standards are required to qualitatively and quantitatively measure the performance between difference systems. This would allow the performance degradation of the system over time to be monitored. In this report, the properties of the femtosecond inscribed structures from three different systems for making suitable OCT characterization artefacts (phantoms) are analyzed. The parameter test samples are directly inscribed inside transparent materials. The structures are characterized using an optical microscope and a swept-source OCT. The high reproducibility of the inscribed structures shows high potential for producing multi-modality OCT calibration and characterization phantoms. Such that a single artefact can be used to characterize multiple performance parameters such the resolution, linearity, distortion, and imaging depths. © 2012 SPIE.

What can higher education contribute to improving social mobility in the UK?

At a time when the UK may slowly be emerging out of what, for many in higher education, has been a period of ‘unprecedented change’ (Universities UK, 2012) in which institutions have found themselves having to balance increases in student expectations and demands against decreases in funding and resources, this special edition focuses on an issue that is becoming ever-more important – that of the relationship between social mobility and higher education. Drawing upon the findings of the Higher Education Academy’s March 2013 Conference: What can higher education contribute to improving social mobility in the UK?, the six papers gathered here give between them a clear indication of the proactive and synergetic manner in which the sector is responding to the resource and funding challenges which it currently faces.

Tackling transition:the value of peer mentoring

This paper is aimed at those interested in the promotion of student retention in higher education; particularly those with an interest in peer mentoring as a means of student support. It critically discusses the results of an exploratory study analysing the perceptions of peer mentors and mentees within five universities in the United Kingdom. The aim of the study was to analyse how student peer mentoring can aid transition into university by focusing specifically on how senior students can support their junior counterparts in their first year at university. The paper discusses the results of a survey which was completed by 329 student peer mentors and mentees. Focusing on the benefits and outcomes of participation in Mentoring Programmes, the survey was distinctive in that it asked mentors and mentees similar questions. From a theoretical perspective, the paper contributes to debates about peer support in higher education showing that participation in such programmes can have positive outcomes from both social and pedagogic perspectives. Practically speaking, the results have important implications for Higher Education Institutions as the research highlights the importance of putting into place formally structured Peer Mentoring Programmes which facilitate student support at a time when new students are most at risk of ‘dropping out’.

The Automation of Adaptive Processes in the System of Distance Education and Knowledge Control

The article reveals a new technological approach to the creation of adaptive systems of distance learning and knowledge control. The use of the given technology helps to automate the learning process with the help of adaptive system. Developed with the help of the quantum approach of knowledge setting, a programming module-controller guarantees the support of students’ attention and the adaptation of the object language, and this helps to provide the effective interaction between learners and the learning system and to reach good results in the intensification of learning process.