Governance mode vs. governance fit: Performance implications of make-or-ally choices for product innovation in the worldwide aircraft industry, 1942-2000

We examine the impact of governance mode and governance fit on performance in make-or-ally decisions. We argue that while horizontal collaboration and autonomous governance have direct and countervailing performance implications, the alignment of make-or-ally choices with the focal firm's resource endowment and the activity's resource requirements leads to better performance. Data on the aircraft industry show that relative to aircraft developed autonomously, collaborative aircraft exhibit greater sales but require longer time-to-market. However, governance fit increases unit sales and reduces time-to-market. We contribute to the alliance and economic organization literatures. (Copyright © 2013 John Wiley & Sons, Ltd.)

Screening of breast lesions: a comparative study between mammography, B-mode ultrasonography, sonoelastography and histological results

Objective To compare the capacity of mammography, sonoelastography, B-mode ultrasonography and histological analysis to differentiate benign from malignant breast lesions. Materials and Methods A total of 12 histopathologically confirmed breast lesions were documented. The lesions were assessed by means of mammography, B-mode ultrasonography and sonoelastography, and histopathological analysis was utilized as a gold standard. Sensitivity and specificity were calculated. A receiver operating characteristic (ROC) curve was constructed to evaluate the diagnostic performance of the mentioned techniques. Results Sensitivity and specificity in the differentiation between benign and malignant lesions were respectively 100% and 50% for mammography, 100% and 71% for B-mode ultrasonography, and 67% and 83% for sonoelastography. The area under the ROC curve was calculated for the three imaging modalities and corresponded to 0.792 for mammography, 0.847 for B-mode ultrasonography, and 0.806 for sonoelastography. Conclusion Sonoelastography demonstrated higher specificity and lower sensitivity as compared with mammography and B-mode ultrasonography. On the other hand, B-mode ultrasonography had the largest area under the ROC curve. Sonoelastography has demonstrated to be a promising technique to detect and evaluate breast lesions, and could potentially reduce the number of unnecessary biopsies.

Mode et costume au fil du temps

pour un aperçu voir dossier de presse http://www.svha-vd.ch/fileadmin/user_upload/PDF/rhv123_dossier_presse_leger.pdf

Expanding to institutionally different countries. Reasons, Firm International Experience, and Entry Mode Choice

We examine entry mode choice and its consequences when a multinational enterprise (MNE) expands into an institutionally different country. We argue that discussions of entry mode should distinguish between informal (e.g., culture) and formal (e.g., laws) institutions, and should take into account not just the home country of the MNE and its distance to the focal host country, but the MNE's overall footprint and experience across the world in general, especially in countries with an institutional structure that is similar to that of the focal host country. Specifically, we argue that firms with experience in countries with different informal institutions will be more likely to enter via acquisitions than firms without such experience, that such experience will not matter as much in the case of formal institutions, and that such firms will exit more quickly when they enter via equity alliances than through full acquisitions. We also distinguish between balanced and unbalanced alliances and argue that balanced alliances will be more enduring, but only when the host country is culturally (not legally) different from the other countries where the MNE has experience. Our arguments suggest that entry mode should be conditioned on a firm's experience in other markets, and that intercountry differences in formal versus informal institutions have distinct influences on entry mode.

Financement et mode d'organisation des hôpitaux suisses : revue du recueil législatif de 1991 à 2009

Le financement des établissements de soins a connu dans le courant de l'année 2007 d'importants changements législatifs. De l'introduction de la tarification à l'activité sur la base des diagnostic-related groups (DRG) à la mise en concurrence directe des hôpitaux, qu'ils appartiennent au secteur public ou au secteur privé, de l'ingérence de la Confédération dans la planification hospitalière (jusque là domaine réservé des Cantons) à la mise au premier plan des critères de qualité dans l'évaluation des établissements hospitaliers, les exemples ne manquent pas pour illustrer le changement conceptuel auquel nous assistons. L'auteur de ces lignes, privilégiant l'approche historique à l'approche normative, s'est demandé quels étaient les prémices de ce changement législatif et s'est confronté aux différents textes qui ont émaillé les débats de ces vingt dernières années, qu'ils émanent du pouvoir exécutif (messages aux chambres fédérales, ordonnances d'application) ou du pouvoir législatif (textes de loi) afin d'en dégager la cohérence politique. Ce mémoire suit donc une ligne strictement chronologique. Il s'inspire des différents travaux parlementaires. A la lecture de ces textes, il apparaît que, pour les parlementaires, la question du financement des hôpitaux n'est qu'une partie, parfois essentielle, parfois accessoire, selon les époques et l'amplitude du champ d'application du document législatif, du financement des soins par l'assurance-maladie. Les grands principes qui régissent l'assurance-maladie s'appliquent donc nécessairement au financement des hôpitaux. Pour cette raison, il est apparu judicieux à l'auteur de ces lignes de ne pas séparer les deux problèmes et de se plonger dans un premier temps dans les débats qui ont eu cours lors de l'adoption de la nouvelle loi sur l'assurance-maladie (LAMaI) en 1994. [Auteur, p. 5]

Mode of interaction of the Gαo subunit of heterotrimeric G proteins with the GoLoco1 motif of Drosophila Pins is determined by guanine nucleotides.

Drosophila GoLoco motif-containing protein Pins is unusual in its highly efficient interaction with both GDP- and the GTP-loaded forms of the α-subunit of the heterotrimeric Go protein. We analysed the interactions of Gαo in its two nucleotide forms with GoLoco1-the first of the three GoLoco domains of Pins-and the possible structures of the resulting complexes, through combination of conventional fluorescence and FRET measurements as well as through molecular modelling. Our data suggest that the orientation of the GoLoco1 motif on Gαo significantly differs between the two nucleotide states of the latter. In other words, a rotation of the GoLoco1 peptide in respect with Gαo must accompany the nucleotide exchange in Gαo. The sterical hindrance requiring such a rotation probably contributes to the guanine nucleotide exchange inhibitor activity of GoLoco1 and Pins as a whole. Our data have important implications for the mechanisms of Pins regulation in the process of asymmetric cell divisions.

Quantitative performance of a quadrupole-orbitrap-MS in targeted LC-MS determinations of small molecules.

High-resolution mass spectrometry (HRMS) has been associated with qualitative and research analysis and QQQ-MS with quantitative and routine analysis. This view is now challenged and for this reason, we have evaluated the quantitative LC-MS performance of a new high-resolution mass spectrometer (HRMS), a Q-orbitrap-MS, and compared the results obtained with a recent triple-quadrupole MS (QQQ-MS). High-resolution full-scan (HR-FS) and MS/MS acquisitions have been tested with real plasma extracts or pure standards. Limits of detection, dynamic range, mass accuracy and false positive or false negative detections have been determined or investigated with protease inhibitors, tyrosine kinase inhibitors, steroids and metanephrines. Our quantitative results show that today's available HRMS are reliable and sensitive quantitative instruments and comparable to QQQ-MS quantitative performance. Taking into account their versatility, user-friendliness and robustness, we believe that HRMS should be seen more and more as key instruments in quantitative LC-MS analyses. In this scenario, most targeted LC-HRMS analyses should be performed by HR-FS recording virtually "all" ions. In addition to absolute quantifications, HR-FS will allow the relative quantifications of hundreds of metabolites in plasma revealing individual's metabolome and exposome. This phenotyping of known metabolites should promote HRMS in clinical environment. A few other LC-HRMS analyses should be performed in single-ion-monitoring or MS/MS mode when increased sensitivity and/or detection selectivity will be necessary.

The internal wave field in Sau reservoir : Observation and modeling of a third vertical mode

Water withdrawal from Mediterranean reservoirs in summer is usually very high. Because of this, stratification is often continuous and far from the typical two-layered structure, favoring the excitation of higher vertical modes. The analysis of wind, temperature, and current data from Sau reservoir (Spain) shows that the third vertical mode of the internal seiche (baroclinic mode) dominated the internal wave field at the beginning of September 2003. We used a continuous stratification two-dimensional model to calculate the period and velocity distribution of the various modes of the internal seiche, and we calculated that the period of the third vertical mode is ;24 h, which coincides with the period of the dominating winds. As a result of the resonance between the third mode and the wind, the other oscillation modes were not excited during this period

Tietoliikenteen tulevaisuuden näkymiä - Etelä-Karjala 2018

Tekniikan kehitys menee vauhdilla eteenpäin ja uusi verkkotekniikoita syntyy koko ajan. Haasteita tuottavat sopivien verkkotekniikoiden löytäminen käyttöön tietylle alueelle ja joissakin tapauksissa joudutaan tyytymään kompromissiratkaisuihin. Lyhyen kantaman langattomat kommunikaatioteknologiat soveltuvat esimerkiksi haja-asutusalueille ja saaristoon, mikäli perinteisen kuidun vetäminen niille alueille ei ole mahdollista. Tässä työssä tuodaan esille niitä langallisia ja langattomia tekniikoita, jotka ovat tällä hetkellä tai tulevaisuudessa merkityksellisiä Etelä-Karjalan kannalta. Osa tekniikoista voi jäädä kokonaan pois käytöstä kymmenen vuoden sisällä tai ne voivat yhdistyä ja muuttaa muotoaan. Työn tuloksena syntyneen kartoituksen perusteella saadaan visio siitä, miltä Etelä-Karjalan tilanne näyttää vuonna 2018. Nyt on jo tiedossa Soneran puhelinlankaverkon alasajo lähivuosina ja kuidun vetäminen viemäriin viemäröintitöiden yhteydessä. Tulevaisuuden kaistankäyttötarpeet ja erilaisten palvelujen lisääntyminen edesauttavat viihdepalveluiden tarjonnan monipuolistumista. Open Access ja triple-play ovat tulevaisuuden termejä. Viihteen lisäksi myös muilla eri osa-alueilla kuten työelämässä, sairaaloissa ja kouluissa on tarvetta laajakaistaisille monipalveluille.

Paperin ominaisuuksiin vaikuttaminen kuitulajeilla ja valmistuksen osaprosesseilla

Työn tarkastellaan massalaatujen valmistusmenetelmiä ja paperinvalmistuksen osaprosesseja pitäen silmällä massalaadun ja jälkikäsittelyn vaikutusta paperin optisiin ja reologisiin ominaisuuksiin. Pääpaino oli käytössä olevilla prosesseilla, mutta myös muutaman viimeisen vuosikymmenen aikaisiin valmistusmenetelmiin tutustuttiin suppeasti. Koska asiakkaat ja kuluttajat vaativat yhä vaaleampia, kestävämpiä ja lujempia papereita, on tärkeää kyetä tunnistamaan eri osa-prosessit, joilla voidaan vaikuttaa näihin ominaisuuksiin. Asiakaslähtöisyyden ohella prosessien pitää nykyisten tiukkojen päästömääräysten vuoksi pyrkiä ympäristöystävälliseen liiketoimintaan. Myös keräyspaperin käytöstä on säädetty asetus, jonka mukaan keräyspaperin pitää päätyä ensisijaisesti uusiopaperin raaka-aineeksi. Ympäristövaatimukset ja kierrätyskuidun käyttö antavatkin omat haasteensa hyvien optisten ja reologisten ominaisuuksien saavuttamisessa.

Studies of Liquid-liquid Separation in Fibre Coalescer

This thesis focuses on fibre coalescers whose efficiency is based on the surface properties/characteristics. They have the ability to preferentially wet or interact with one or more of the fluids to be separated. Thus, the interfacial phenomena governing the separation efficiency of the coalescers is investigated depending on physical factors such as flowrates, phase ratios and coalescer packing density. Design of process equipment to produce and separate of the emulsions was carried out.The experimentation was carried out to test the separation efficiency of the coalescing medias, namely fibreglass, polyester I and polyester II. The performances of the coalescing medias were assessed via droplet size information. In conclusion, the objectives (design of process equipment and experimentation) were achieved. Fibre glass was the best coalescing media, next was polyester I and then finally polyester II. Droplets sizes increased with decreased flowrates and increased packing density of the coalescer. Phase ratio had effect on the droplet sizes of the feed but had no effect on the coalescence of droplets of the feed.

Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials

A thermodynamically consistent damage model for the simulation of progressive delamination under variable mode ratio is presented. The model is formulated in the context of the Damage Mechanics. The constitutive equation that results from the definition of the free energy as a function of a damage variable is used to model the initiation and propagation of delamination. A new delamination initiation criterion is developed to assure that the formulation can account for changes in the loading mode in a thermodynamically consistent way. The formulation proposed accounts for crack closure effets avoiding interfacial penetration of two adjacent layers aftercomplete decohesion. The model is implemented in a finite element formulation. The numerical predictions given by the model are compared with experimental results

Eliminació d'artefactes en EGG mitjançant l'ús de la Multivariate Empirical Mode Decomposition

La tècnica de l’electroencefalograma (EEG) és una de les tècniques més utilitzades per estudiar el cervell. En aquesta tècnica s’enregistren els senyals elèctrics que es produeixen en el còrtex humà a través d’elèctrodes col•locats al cap. Aquesta tècnica, però, presenta algunes limitacions a l’hora de realitzar els enregistraments, la principal limitació es coneix com a artefactes, que són senyals indesitjats que es mesclen amb els senyals EEG. L’objectiu d’aquest treball de final de màster és presentar tres nous mètodes de neteja d’artefactes que poden ser aplicats en EEG. Aquests estan basats en l’aplicació de la Multivariate Empirical Mode Decomposition, que és una nova tècnica utilitzada per al processament de senyal. Els mètodes de neteja proposats s’apliquen a dades EEG simulades que contenen artefactes (pestanyeigs), i un cop s’han aplicat els procediments de neteja es comparen amb dades EEG que no tenen pestanyeigs, per comprovar quina millora presenten. Posteriorment, dos dels tres mètodes de neteja proposats s’apliquen sobre dades EEG reals. Les conclusions que s’han extret del treball són que dos dels nous procediments de neteja proposats es poden utilitzar per realitzar el preprocessament de dades reals per eliminar pestanyeigs.