Power Optimal Network-on-Chip Interconnect Design

A large part of today's multi-core chips is interconnect. Increasing communication complexity has made essential new strategies for interconnects, such as Network on Chip. Power dissipation in interconnects has become a substantial part of the total power dissipation. Techniques to reduce interconnect power have thus become a necessity. In this paper, we present a design methodology that gives values of bus width for interconnect links, frequency of operation for routers, in Network on Chip scenario that satisfy required throughput and dissipate minimal switching power. We develop closed form analytical expressions for the power dissipation, with bus width and frequency as variables and then use Lagrange multiplier method to arrive at the optimal values. We present a 4 port router in 90 nm technology library as case study. The results obtained from analysis are discussed.

Flow of a power law fluid in an annulus with porous walls

The steady flow of a power law fluid in annuli with porous walls is investigated. The solution for the axial velocity component is obtained as a power series in terms of the cross flow Reynolds number, the first term of the series giving the solution for the case of the solid wall annulus. The cross flow is restricted to be such that the rate of injection of fluid at one wall of the annulus is equal to the rate of suction at the other wall and also we have considered only very small values of the cross flow velocity. The velocity profiles are drawn for different values of n and for different gaps and the results are discussed in detail. The behaviour of the average flux, in different eases is also discussed.

Free convection heat transfer from vertical cylinders part I: Power law surface temperature variation

This paper reports on the investigations of laminar free convection heat transfer from vertical cylinders and wires whose surface temperature varies along the height according to the relation TW - T∞ = Nxn. The set of boundary layer partial differential equations and the boundary conditions are transformed to a more amenable form and solved by the process of successive substitution. Numerical solutions of the first approximated equations (two-point nonlinear boundary value type of ordinary differential equations) bring about the major contribution to the problem (about 95%), as seen from the solutions of higher approximations. The results reduce to those for the isothermal case when n=0. Criteria for classifying the cylinders into three broad categories, viz., short cylinders, long cylinders and wires, have been developed. For all values of n the same criteria hold. Heat transfer correlations obtained for short cylinders (which coincide with those of flat plates) are checked with those available in the literature. Heat transfer and fluid flow correlations are developed for all the regimes.

Emerging trends at the interface of chemistry and biology: Applications to the design of human therapeutics

This article describes recent developments in the design and implementation of various strategies towards the development of novel therapeutics using first principles from biology and chemistry. Strategies for multi-target therapeutics and network analysis with a focus on cancer and HIV are discussed. Methods for gene and siRNA delivery are presented along with challenges and opportunities for siRNA therapeutics. Advances in protein design methodology and screening are described, with a focus on their application to the design of antibody based therapeutics. Future advances in this area relevant to vaccine design are also mentioned.

Making sense of a transnational merger: Media texts and the (re)construction of power relations

In this study of symbolic power relations in a transnational merger, we suggest that the popular media can provide a significant arena for (re)constructing national identities and power in this kind of dramatic industrial restructuring, and are an under-utilized source of empirical data in research studies. Focusing on the press coverage of a recent Swedish-Finnish merger, we specify and illustrate a particular feature of discursive (re)construction of asymmetric power relations; superior (Swedish) and inferior (Finnish) national identities, which, we argue, are embedded in the history of colonization and domination between the two nations. The findings of the present study lead us to suggest that a lens taken from post-colonial theory is particularly useful in understanding the wider symbolic power implications of international industrial restructuring.

Language and the Circuits of Power in a Merging Multinational Corporation

We argue in this paper that corporate language policies have significant power implications that are easily overlooked. By drawing on previous work on power in organizations (Clegg, 1989), we examine the complex power implications of language policy decisions by looking at three levels of analysis: episodic social interaction, identity/subjectivity construction, and reconstruction of structures of domination. In our empirical analysis, we focus on the power implications of the choice of Swedish as the corporate language in the case of the recent banking sector merger between the Finnish Merita and the Swedish Nordbanken. Our findings show how language skills become empowering or disempowering resources in organizational communication, how these skills are associated with professional competence, and how this leads to the creation of new social networks. The case also illustrates how language skills are an essential element in the construction of international confrontation, lead to a construction of superiority and inferiority, and also reproduce post-colonial identities in the merging bank. Finally, we also point out how such policies ultimately lead to the reification of post-colonial and neo-colonial structures of domination in multinational corporations.

Language and the circuits of power in a merging multinational corporation

We argue in this paper that corporate language policies have significant power implications that are easily overlooked. By drawing on previous work on power in organizations (Clegg, 1989), we examine the complex power implications of language policy decisions by looking at three levels of analysis: episodic social interaction, identity/subjectivity construction, and reconstruction of structures of domination. In our empirical analysis, we focus on the power implications of the choice of Swedish as the corporate language in the case of the recent banking sector merger between the Finnish Merita and the Swedish Nordbanken. Our findings show how language skills become empowering or disempowering resources in organizational communication, how these skills are associated with professional competence, and how this leads to the creation of new social networks. The case also illustrates how language skills are an essential element in the construction of international confrontation, lead to a construction of superiority and inferiority, and also reproduce post-colonial identities in the merging bank. Finally, we also point out how such policies ultimately lead to the reification of post-colonial and neo-colonial structures of domination in multinational corporations.

Low Power continuous time common mode sensing for common mode feedback circuits

Continuous common mode feedback (CMFB) circuits having high input impedance and low distortion are proposed. The proposed circuits are characterized for 0.18 mu m CMOS process with 1.8 V supply. Simulation results indicate that the proposed common mode detector consumes no standby power and CMFB circuit consumes 27-34% less power than previous high swing CMFB circuits.

Moment-Matched Lognormal Modeling of Uplink Interference with Power Control and Cell Selection

We develop an alternate characterization of the statistical distribution of the inter-cell interference power observed in the uplink of CDMA systems. We show that the lognormal distribution better matches the cumulative distribution and complementary cumulative distribution functions of the uplink interference than the conventionally assumed Gaussian distribution and variants based on it. This is in spite of the fact that many users together contribute to uplink interference, with the number of users and their locations both being random. Our observations hold even in the presence of power control and cell selection, which have hitherto been used to justify the Gaussian distribution approximation. The parameters of the lognormal are obtained by matching moments, for which detailed analytical expressions that incorporate wireless propagation, cellular layout, power control, and cell selection parameters are developed. The moment-matched lognormal model, while not perfect, is an order of magnitude better in modeling the interference power distribution.

Three-Dimensional simulation of deformation fields underneath vickers indenter:Effects of power-law Plasticity

The effects of power-law plasticity (yield strength and strain hardening exponent) on the plastic strain distribution underneath a Vickers indenter was systematically investigated by recourse to three-dimensional finite element analysis, motivated by the experimental macro-and micro-indentation on heat-treated Al-Zn-Mg alloy. For meaningful comparison between simulated and experimental results, the experimental heat treatment was carefully designed such that Al alloy achieve similar yield strength with different strain hardening exponent, and vice versa. On the other hand, full 3D simulation of Vickers indentation was conducted to capture subsurface strain distribution. Subtle differences and similarities were discussed based on the strain field shape, size and magnitude for the isolated effect of yield strength and strain hardening exponent.

Essays on Stock Options, Incentives, and Managerial Action

Executive compensation and managerial behavior have received an increasing amount of attention in the financial economics literature since the mid 1970s. The purpose of this thesis is to extend our understanding of managerial compensation, especially how stock option compensation is linked to the actions undertaken by the management. Furthermore, managerial compensation is continuously and heatedly debated in the media and an emerging consensus from this discussion seems to be that there still exists gaps in our knowledge of optimal contracting. In Finland, the first executive stock options were introduced in the 1980s and throughout the last 15 years it has become increasingly popular for Finnish listed firms to use this type of managerial compensation. The empirical work in the thesis is conducted using data from Finland, in contrast to most previous studies that predominantly use U.S. data. Using Finnish data provides insight of how market conditions affect compensation and managerial action and provides an opportunity to explore what parts of the U.S. evidence can be generalized to other markets. The thesis consists of four essays. The first essay investigates the exercise policy of the executive stock option holders in Finland. In summary, Essay 1 contributes to our understanding of the exercise policies by examining both the determinants of the exercise decision and the markets reaction to the actual exercises. The second essay analyzes the factors driving stock option grants using data for Finnish publicly listed firms. Several agency theory based variables are found to have have explanatory power on the likelihood of a stock option grant. Essay 2 also contributes to our understanding of behavioral factors, such as prior stock return, as determinants of stock option compensation. The third essay investigates the tax and stock option motives for share repurchases and dividend distributions. We document strong support for the tax motive for share repurchases. Furthermore, we also analyze the dividend distribution decision in companies with stock options and find a significant difference between companies with and without dividend protected options. We thus document that the cutting of dividends found in previous U.S. studies can be avoided by dividend protection. In the fourth essay we approach the puzzle of negative skewness in stock returns from an altogether different angle than in previous studies. We suggest that negative skewness in stock returns is generated by management disclosure practices and find proof for this. More specifically, we find that negative skewness in daily returns is induced by returns for days when non-scheduled firm specific news is disclosed.

From Creative Ideas to New Emerging Ventures: Entrepreneurial Processes among Finnish Design Entrepreneurs

This study focuses on self-employed industrial designers and how they emerge new venture ideas. More specifically, this study strives to determine what design entrepreneurs do when they create new venture ideas, how venture ideas are nurtured into being, and how the processes are organized to bring such ideas to the market in the given industrial context. In contemporary times when the concern for the creative class is peaking, the research and business communities need more insight of the kind that this study provides, namely how professionals may contribute to their entrepreneurial processes and other agents’ business processes. On the one hand, the interviews underlying this study suggest that design entrepreneurs may act as reactive service providers who are appointed by producers or marketing parties to generate product-related ideas on their behalf. On the other hand, the interviews suggest that proactive behaviour that aims on generating own venture ideas, may force design entrepreneurs to take considerable responsibility in organizing their entrepreneurial processes. Another option is that they strive to bring venture ideas to the market in collaboration, or by passing these to other agents’ product development processes. Design entrepreneurs’ venture ideas typically emerge from design related starting points and observations. Product developers are mainly engaged with creating their own ideas, whereas service providers refer mainly to the development of other agents’ venture ideas. In contrast with design entrepreneurs, external actors commonly emphasize customer demand as their primary source for new venture ideas, as well as development of these in close interaction with available means of production and marketing. Consequently, design entrepreneurs need to address market demand since without sales their venture ideas may as well be classified as art. In case, they want to experiment with creative ideas, then there should be another source of income to support this typically uncertain and extensive process. Currently, it appears like a lot of good venture ideas and resources are being wasted, when venture ideas do not suite available production or business procedures. Sufficient communication between design entrepreneurs and other agents would assist all parties in developing production efficient and distributable venture ideas. Overall, the findings suggest that design entrepreneurs are often involved simultaneously in several processes that aim at emerging new product related ventures. Consequently, design entrepreneurship is conceptualized in this study as a dual process. This implies that design entrepreneurs can simultaneously be in charge of their entrepreneurial processes, as they operate as resources in other agents’ business processes. The interconnection between activities and agents suggests that these kinds of processes tend to be both complex and multifaceted to their nature.

Analysis of the performance characteristics of a two-inertia power transmission system with a plate clutch

The performance of a plate clutch in a two-inertia power transmission system is analysed assuming negligible compliance and using a piecewise linear function to represent the clutch torque characteristic. Expressions defining, for all linear segments of the clutch torque characteristic, dimensionless input and output velocities of the clutch and dimensionless slip period are presented. The use of these expressions in preparing design charts to aid analysis and design of the plate clutch is outlined.