Incidence of green soybean seeds as a function of environmental stresses during seed maturation

Hot and dry weather conditions during soybean [Glycine max (L.) Merrill] seed maturation can cause forced maturation of the seed, resulting in the production of high levels of green seed, which may be detrimental to seed germination. These stressful conditions were imposed on soybean plants during seed maturation to investigate the production of green seeds and seed quality. Plants of the CD 206 cultivar were grown in a greenhouse until the R5.5 growing stage and then transferred to phytotrons at R6 and R7.2 for stress induction. Plants were subjected to two temperature regimes, high (28ºC to 36ºC) and normal (19ºC to 26ºC), and four soil water availability conditions, control (adequate water supply), 30% gravimetric moisture (GM), 20% GM and no water supply. Seed were harvested at R9. Green seed percentages and 100-seed weights from the lower, middle and upper thirds of each plant were determined. Seed quality was assessed by germination, tetrazolium (viability and vigor) and electrical conductivity tests. Occurrence of green seed varied from 9% to 86%, depending on the severity of the stresses imposed. High temperature, coupled with no water supply at R6, resulted in a pronounced occurrence of green seeds. There was no difference in the percentage of green seeds among the plant segments. Seed quality was negatively affected by the incidence of green seeds. A procedure for screening soybean genotypes in a phytotron for their tolerance and/or susceptibility to the production of green seeds was developed.

Test of exudates color hues for evaluating the physiological potential of coffee (Coffea arabica L.) seeds

Coffee seeds have slow and irregular germination, losing fast their viability during storage, and the standard germination test of these seeds requires at least 30 days. Besides, the results may not reflect the actual physiological quality of these seeds. The objective of this work was to develop a fast and practical test for evaluating the viability of coffee seeds, which is based on the interpretation of different color hues of exudates from seeds. Coffee seeds of the cultivar Catuai 44 from six lots were submitted to germination, accelerated aging, and electrical conductivity tests. In the exudates color hue test, coffee seeds without the parchment and the silvery pellicle (four replications of 10 seeds each) were distributed on top of paper towels moistened and then maintained into a germinator, at 25 ºC for 24, 48, 72, 96, and 120 h. Three classes of color hues were established: colorless, light color hue, and dark color hue, assigning the values of 0, 1, and 3, for each class, respectively. The proposed exudates color hue test can be recommended for the fast assessment of viability for coffee seeds. The most promising results were obtained for seeds with 12% moisture content, after imbibition periods of 72, 96, and 120 h; and with 30% moisture content, after imbibition periods of 72 and 120 h.

Physiological maturity of eggplant seeds

Determination of seed physiological maturity and ideal moment for harvesting fruits to extract their seeds are important aspects to produce seeds with high quality. To identify the best period for harvesting eggplant fruits, associated with ideal resting period of the fruit for extracting seeds, an eggplant production field was installed in municipality of Ijaci, in the State of Minas Gerais, Southwestern Brazil. The fruits were harvested at periods of 49, 56, 63, 70, and 77 days after pollination (DAP). The seeds of fruits harvested in each period were manually extracted immediately after harvest or after a post-harvest resting period of seven days, under a shed. The physiological quality of seeds was assessed by tests of: germination percentage; germination and emergence speed indexes; and electrical conductivity; which were carried out in the Central Seed Laboratory, Federal University of Lavras. Electrophoretic analyses of isoenzymes: catalase (CAT); esterase (EST); superoxide dismutase (SOD); and peroxidase (PO), were also therein performed. Results of germination and vigor of seeds have showed that the best period for harvesting the fruit is around 70 DAP; and that seeds should be extracted immediately after harvest. Electrophoretic analysis of enzymes has showed immaturity for eggplant seeds, harvested after 49 DAP.

Influence of lignin content in soybean seed coat on the incidence of the storage fungus Aspergillus flavus

Seed quality may be affected by several factors, including permeability, color, and lignin content in the seed coat. This study aimed at evaluating influence of lignin content in the tegument of seed samples of six different soybean cultivars, in which half of each sample was inoculated with the fungus Aspergillus flavus, on the physical and physiological quality, and on the seed health, during 180 days storage period, under cold chamber with controlled conditions of temperature and RH. For that, at each interval of 60 days, samples were removed, and the physiological quality of these seeds was assessed by means of moisture and lignin contents; and by tests of seed health, germination, and electrical conductivity. The moisture content of seeds remained constant during all storage period. In the seed health test, it was found that inoculation was efficient, once the minimum incidence of the fungus in the inoculated seeds was 85%. In the germination test, there was a trend of reduction on percentage germination with the increase in storage period. However, there was an increase on electrical conductivity of seeds assessed. It was concluded that there is no interference of the lignin content in the seed coat on the resistance to infection by the fungus Aspergillus flavus, even after seed storage for a period of 180 days.

Kulutuselektroniikan akkujen tekniset ominaisuudet ja markkinaosuudet 2015

Työssä tutkittiin kirjallisuustyönä akkuteknologian nykytilaa ja markkinoita kulutuselektroniikan osalta. Työssä tehtiin myös katsaus potentiaalisiin tulevaisuuden akkuteknologioihin. Työssä havaittiin, että kulutuselektroniikassa ainoat suuresti käytetyt akkutyypit ovat nikkelimetallihybridi- (NiMH) ja litiumioniakut (Li-ion). Tärkeimpänä ominaisuutena kulutuselektroniikassa akuilla yleensä pidetään kapasiteettia, jossa Li-ion akut ovat selvästi parempia jopa kaksinkertaisen energiatiheyden takia. Li-ion akuilla voidaan saavuttaa myös moninkertainen käyttöikä lataussykleinä ja moninkertainen purkausvirta, riippuen käytetystä katodimateriaalista. NiMH akuilla etuna on lähinnä halvempi hinta ja parempi turvallisuus. Toisaalta myös pieni jännite voidaan laskea hyväksi puoleksi, koska NiMH akuilla voidaan korvata kertakäyttöisiä alkaliparistoja. Vuonna 2012 Li-ion akkuja myytiin kapasiteetissa mitattuna jopa kahdeksan kertaa enemmän kuin NiMH akkuja ja myyntimäärien ennustetaan myös kasvavan tulevaisuudessa. Liion akkujen myyntimääristä suurin osa oli kulutuselektroniikan käyttökohteisiin ja jopa kaksi kolmasosaa oli kannettavien tietokoneiden ja kännyköiden akkuja. Uusia akkuteknologioita ja Li-ion akkujen parannuksia on paljon kehitteillä, mutta suurimman potentiaalin ja myös suuret ongelmat kaupallistumiseen omaa litium-ilma akut. Lyhyemmällä aikavälillä potentiaalisia teknologioita ovat litium-rikki akut, sekä nykyisiin Li-ion akkuihin kehitteillä olevat anodimateriaalit kuten esim. pii ja alumiini/titaani, joiden ongelmiin on löydetty ratkaisuja nanoteknologiasta.

Peak Force Kelvin Probe Force Microscopy Investigation of ZrO2 Nanocomposites for Hygroelectricity Power Element

ZrO2 nanocomposites were investigated considering their perspective application in hygroelectric power elements. Scanning probe microscopy (SPM) techniques allowed to visualize the surface topography and electrical properties. In this work was compared spacial charge behaviour of sample in humid and dry air conditions. Also different SPM modes were compared. Kelvin probe force microscopy (KPFM) was applied to characterize the spacial charge distribution on surface of the sample. Measurements showed, that trapped charge is not dissipated and can be manipulated with low voltages. Humidity influence on the electric potential of the sample was shown.

Infrared spectroscopy of Mg-doped SrRuO3 thin films /

The reflectance of thin films of magnesium doped SrRu03(Mg-SR0) produced by pulsed laser deposition on SrTiOa (100) substrates has been measured at room temperature between 100 and 7500 cm~^. The films were chosen to have wide range of thickness, stoichiometry and electrical properties. As the films were very thin (less than 300 nm), and some were insulating the reflectance data shows structures due to both the film and the substrate. Hence, the data was analyzed using Kramers-Kronig constrained variational fitting (VDF) method to extract the real optical conductivity of the Mg-SRO films. Although the VDF technique is flexible enough to fit all features of the reflectance spectra, it seems that VDF could not eliminate the substrate's contribution from fllm conductivity results. Also the comparison of the two different programs implementing VDF fltting shows that this technique has a uniqueness problem. The optical properties are discussed in light of the measured structural and transport properties of the fllms which vary with preparation conditions and can be correlated with differences in stoichiometry. This investigation was aimed at checking the VDF technique and also getting answer to the question whether Mg^"*" substitutes in to Ru or Sr site. Analysis of our data suggests that Mg^+ goes to Ru site.

Passive Solar Building Design Using Genetic Programming

Passive solar building design is the process of designing a building while considering sunlight exposure for receiving heat in winter and rejecting heat in summer. The main goal of a passive solar building design is to remove or reduce the need of mechanical and electrical systems for cooling and heating, and therefore saving energy costs and reducing environmental impact. This research will use evolutionary computation to design passive solar buildings. Evolutionary design is used in many research projects to build 3D models for structures automatically. In this research, we use a mixture of split grammar and string-rewriting for generating new 3D structures. To evaluate energy costs, the EnergyPlus system is used. This is a comprehensive building energy simulation system, which will be used alongside the genetic programming system. In addition, genetic programming will also consider other design and geometry characteristics of the building as search objectives, for example, window placement, building shape, size, and complexity. In passive solar designs, reducing energy that is needed for cooling and heating are two objectives of interest. Experiments show that smaller buildings with no windows and skylights are the most energy efficient models. Window heat gain is another objective used to encourage models to have windows. In addition, window and volume based objectives are tried. To examine the impact of environment on designs, experiments are run on five different geographic locations. Also, both single floor models and multi-floor models are examined in this research. According to the experiments, solutions from the experiments were consistent with respect to materials, sizes, and appearance, and satisfied problem constraints in all instances.

Transport électrique dans les nanotubes de carbone et leurs dérivés fonctionnalisés

Les nanotubes de carbone forment une structure quasi-unidimensionnelle de diamètre nanométrique, dont les propriétés mécaniques et électroniques, en particulier leur remarquable conductivité électrique, présentent un grand potentiel pour la conception de dispositifs électroniques. Les nanotubes fonctionnalisés, c’est-à-dire dont la paroi a été chimiquement modifiée, présentent aussi un intérêt majeur pour leur mise en œuvre facilitée et pour la formation d’une interface active entre le nanotube et l’environnement, cette dernière étant essentielle pour la conception de nanocapteurs chimiques et biologiques. La présente thèse porte sur l’étude des mécanismes gouvernant le transport électrique dans les nanotubes de carbone et leurs dérivés fonctionnalisés. Les travaux, de nature expérimentale, ont été réalisés sur des dispositifs électroniques constitués d’un nanotube individuel monoparoi ou biparoi, additionné de groupes fonctionnels au besoin. En première partie, on s’intéresse à l’effet de la dimensionnalité sur les mécanismes d’injection des porteurs de charge au niveau des contacts électriques avec le nanotube. En seconde partie, on étudie l’effet de la fonctionnalisation covalente sur les propriétés de transport électrique des nanotubes, et on montre notamment que l’impact de l’addition des greffons varie fortement selon leur valence et qu’il est possible d’obtenir des nanotubes fonctionnalisés avec une bonne conductance. En troisième partie, on explore les phénomènes de saturation du courant et de claquage électrique survenant à haut voltage. Enfin, on discute de l’impact des résultats obtenus sur l’avancement de la compréhension des mécanismes de transport électrique dans les systèmes hautement confinés, ainsi que des perspectives fondamentales et technologiques ouvertes par ces travaux.

L’effet de la surexpression du récepteur de type 1 à l’angiotensine II sur les courants potassiques et calciques au niveau des oreillettes

Le système rénine-angiotensine est impliqué dans le remodelage structurel et électrique caractérisant la fibrillation auriculaire (FA). L’angiotensine II (ANG II) induit le développement de fibrose et d’hypertrophie au niveau des oreillettes, prédisposant à la FA. Or, les mécanismes électrophysiologiques par lesquels l’ANG II pourrait promouvoir la FA sont peu connus. L’objectif de ce projet de recherche est d’évaluer l’effet de l’ANG II sur les courants potassiques et calciques au niveau auriculaire indépendamment du remodelage structurel. Pour ce faire, nous avons utilisé la technique de patch-clamp avec un modèle de souris surexprimant le récepteur de type 1 à l’angiotensine II (AT1R) spécifiquement au niveau cardiaque. Pour distinguer les effets directs de la surexpression d’AT1R des effets induits par le remodelage cardiaque, nous avons étudié des souris âgées de 180 jours, qui présentent du remodelage structurel, et des souris âgées de 50 jours, qui n’en présentent pas. Des études précédentes sur ce modèle ont montré qu’au niveau des myocytes ventriculaires, l’ANG II réduit le courant potassique global (Ipeak) et rectifiant entrant (IK1) ainsi que le courant calcique de type L (ICaL). Ainsi, notre hypothèse est que l’ANG II modulera aussi ces courants au niveau auriculaire, pouvant ainsi augmenter l’hétérogénéité de repolarisation auriculaire et de ce fait le risque de développer et maintenir la FA. Nous avons observé une diminution significative de la densité d’IK1 dans l’oreillette gauche des souris transgéniques sans changement d’Ipeak. De plus, la densité d’ ICaL n’est pas réduite chez les souris transgéniques âgées de 50 jours. En conclusion, l’effet de l’ANG II sur les courants potassiques et calciques semble dépendre de la chambre cardiaque. En effet, nous savions que l’ANGII réduisait Ipeak, IK1 et ICaL au niveau ventriculaire, mais nos résultats ont montré qu’il ne les affectait pas directement au niveau des oreillettes. Ceci suggère des mécanismes de régulation impliquant des voies de signalisation distinctes selon les chambres cardiaques. Enfin, nos résultats montrant l’absence de l’influence directe de la surexpression d’AT1R sur les canaux K+ et Ca2+ au niveau des myocytes auriculaires renforcent l’importance d’approfondir nos connaissances sur les effets de l’angiotensine II sur le développement de la fibrose, sur le remodelage structurel et sur la conduction électrique cardiaque.

Engineering the Properties of Indium Sulfide for Thin Film Solar Cells by Doping

In the present work, structural, optical and electrical properties of indium sulfide are tuned by specific and controlled doping. Silver, tin, copper and chlorine were used as the doping elements. In2S3 thin films for the present study were prepared using a simple and low cost “Chemical Spray Pyrolysis (CSP)” technique. This technique is adaptable for large-area deposition of thin films in any required shape and facilitates easiness of doping and/or variation of atomic ratio. It involves spraying a solution, usually aqueous, containing soluble salts of the constituents of the desired compound onto a heated substrate. Doping process was optimized for different doping concentrations. On optimizing doping conditions, we tuned the structural, optical and electrical properties of indium sulfide thin films making them perform as an ideal buffer layer.

Luminescence studies of strontium sulphide based phosphors for display applications

This thesis has focused on the synthesis and analysis of some important phosphors (nano, bulk and thin film) for display applications. ACTFEL device with SrS:Cu as active layer was also fabricated.Three bulk phosphors: SrS:Cu,CI; SrS:Dy,Cl; and SrS:Dy,Cu,Cl were synthesized and their structural, optical and electrical properties were investigated. Special emphasis was given to, the analysis of the role of defects and charge compensating centers, on the structural changes of the host and hence the luminance. A new model describing the sensitizing behaviour of Cu in SrS:Dy,Cu,Cl two component phosphor was introduced. It was also found that addition of NH4CI as flux in SrS:Cu caused tremendous improvement in the structural and luminescence properties.A novel technique for ACTFEL phosphor deposition at low temperature was introduced. Polycrystalline films of SrS:Cu,F were synthesized at low temperature by concomitant evaporation of host and dopant by electron beam evaporation and thermal evaporatin methods.Copper doped strontium sulphide nanophosphor was synthesized for the first time. Improvement in the luminescence properties was observed in the nanophosphor with respect to it' s bulk counterpart.

Studies on underwater propagation development of programmable arrays

The thesis presented here includes the designing of underwater transducer arrays, taking into account the ‘interaction effects’ [30] among the closely packed radiators. Methods of minimizing the ‘interaction effects‘ by modifying the radiating aperture, are investigated. The need for this study arises as it is one of the important peculiar limitations that stands in the way of achieving maximum range of transmission of acoustic signals. Application of the modified array format for the generation of narrow beam low frequency sound waves, through nonlinear interactions, is discussed. Other techniques that can be advantageously exploited in array synthesis are also investigated

Magnetoresistance at artificial interfaces in the itinerant SrRuO3 ferromagnet

The magnetoresistance across interfaces in the itinerant ferromagnetic oxide SrRuO3 have been studied. To define appropriately the interfaces, epitaxial thin films have been grown on bicrystalline and laser-patterned SrTiO3 substrates. Comparison is made with results obtained on similar experiments using the double-exchange ferromagnetic oxide La2/3Sr1/3MnO3. It is found that in SrRuO3, interfaces induce a substantial negative magnetoresistance, although no traces of the low-field spin tunneling magnetoresistance are found. We discuss these results on the basis of the distinct degree of spin polarization in ruthenates and manganites and the different nature of the surface magnetic layer formed at interfaces.

Enhanced electron-electron correlations in nanometric epitaxial SrRuO3 epitaxial films

Epitaxial and fully strained SrRuO3 thin films have been grown on SrTiO3(100). At initial stages the growth mode is three-dimensional- (3D-)like, leading to a finger-shaped structure aligned with the substrate steps and that eventually evolves into a 2D step-flow growth. We study the impact that the defect structure associated with this unique growth mode transition has on the electronic properties of the films. Detailed analysis of the transport properties of nanometric films reveals that microstructural disorder promotes a shortening of the carrier mean free path. Remarkably enough, at low temperatures, this results in a reinforcement of quantum corrections to the conductivity as predicted by recent models of disordered, strongly correlated electronic systems. This finding may provide a simple explanation for the commonly observed¿in conducting oxides-resistivity minima at low temperature. Simultaneously, the ferromagnetic transition occurring at about 140 K, becomes broader as film thickness decreases down to nanometric range. The relevance of these results for the understanding of the electronic properties of disordered electronic systems and for the technological applications of SrRuO3¿and other ferromagnetic and metallic oxides¿is stressed.