Identification of genes associated with local aggressiveness and metastatic behavior in soft tissue tumors

Soft tissue tumors represent a group of neoplasia with different histologic and biological presentations varying from benign, locally confined to very aggressive and metastatic tumors. The molecular mechanisms responsible for such differences are still unknown. The understanding of these molecular alterations mechanism will be critical to discriminate patients who need systemic treatment from those that can be treated only locally and could also guide the development of new drugs` against this tumors. Using 102 tumor samples representing a large spectrum of these tumors, we performed expression profiling and defined differentially expression genes that are likely to be involved in tumors that are locally aggressive and in tumors with metastatic potential. We described a set of 12 genes (SNRPD3, MEGF9, SPTAN-1, AFAP1L2, ENDOD1, SERPIN5, ZWINTAS, TOP2A, UBE2C, ABCF1, MCM2, and ARL6IP5) showing opposite expression when these two conditions were compared. These genes are mainly related to cell-cell and cell-extracellular matrix interactions and cell proliferation and might represent helpful tools for a more precise classification and diagnosis as well as potential drug targets.

Influence diagnostics in Birnbaum-Saunders nonlinear regression models

We consider the issue of assessing influence of observations in the class of Birnbaum-Saunders nonlinear regression models, which is useful in lifetime data analysis. Our results generalize those in Galea et al. [8] which are confined to Birnbaum-Saunders linear regression models. Some influence methods, such as the local influence, total local influence of an individual and generalized leverage are discussed. Additionally, the normal curvatures for studying local influence are derived under some perturbation schemes. We also give an application to a real fatigue data set.

Calculating Flash Point Numbers from Molecular Structure: An Improved Method for Predicting the Flash Points of Acyclic Alkanes

We report a novel method for calculating flash points of acyclic alkanes from flash point numbers, N(FP), which can be calculated from experimental or calculated boiling point numbers (Y(BP)) with the equation N(FP) = 1.020Y(BP) - 1.083 Flash points (FP) are then determined from the relationship FP(K) = 23.369N(FP)(2/3) + 20.010N(FP)(1/3) + 31.901 For it data set of 102 linear and branched alkanes, the correlation of literature and predicted flash points has R(2) = 0.985 and an average absolute deviation of 3.38 K. N(FP) values can also be estimated directly from molecular structure to produce an even closer correspondence of literature and predicted FP values. Furthermore, N(FP) values provide a new method to evaluate the reliability of literature flash point data.

Structure of polyaniline formed in different inorganic porous materials: A spectroscopic study

In this work, the electronic and structural characterization of polyaniline (PANI) formed in cavities of zeolites Y (ZY) and Mordenite (MOR) and montmorillonite (MMT) clay having Cu(II) as oxidant agent are presented. The formation of PANI and its structure is analyzed by Resonance Raman, UV-Vis-NIR, FT-IR and N K XANES techniques. In all cases the structure of PANT formed is different from the ""free"" polymer. The presence of azo bonds linked to phenazine-like rings are observed only for PANI-MMT composites, independent of the kind of oxidant agent employed in the synthesis. The presence of Cu(II) ions leads to the formation of Phenosafranine-like rings. The presence of these phenazine-like rings in the structure of confined PANT chains can also contribute to the enhancement of the thermal stability observed for all composites. (C) 2008 Elsevier Ltd. All rights reserved.

Simple Method to Evaluate and to Predict Flash Points of Organic Compounds

Flash points (T(FP)) of organic compounds are calculated from their flash point numbers, N(FP), with the relationship T(FP) = 23.369N(FP)(2/3) + 20.010N(FP)(1/3) + 31.901. In turn, the N(FP) values can be predicted from boiling point numbers (Y(BP)) and functional group counts with the equation N(FP) = 0.974Y(BP) + Sigma(i)n(i)G(i) + 0.095 where G(i) is a functional group-specific contribution to the value of N(FP) and n(i) is the number of such functional groups in the structure. For a data set consisting of 1000 diverse organic compounds, the average absolute deviation between reported and predicted flash points was less than 2.5 K.

Soda-Treated Sisal/Polypropylene Composites

Treated sisal fibers were used as reinforcement of polypropylene (PP) composites, with maleic anhydride-grafted PP (MAPP) as coupling agent. The composites were made by melting processing of PP with the fiber in a heated roller followed by multiple extrusions in a single-screw extruder. Injection molded specimens were produced for the characterization of the material. In order to improve the adhesion between fiber and matrix and to eliminate odorous substances, sisal fibers were treated with boiling water and with NaOH solutions at 3 and 10 wt.%. The mechanical properties of the composites were assessed by tensile, bend and impact tests. Additionally, the morphology of the composites and the adhesion at he fiber-matrix interface were analyzed by SEM. The fiber treatment led to very light and odorless materials, with yields of 95, 74 and 62 wt.% for treatments with hot water, 3 and 10 wt.% soda solution respectively. Fiber treatment caused an appreciable change in fiber characteristics, yet the mechanical properties under tensile and flexural tests were not influenced by that treatment. Only the impact strength increased in the composites with alkali-treated sisal fibers.

Characterization of the raw essential oil eugenol extracted from Syzygium aromaticum L.

Eugenol is the main volatile compound extracted oil from clove bud, Syzygium aromaticum L., and used in traditional medicine, as a bactericide, fungicide, anesthetic, and others. Its extraction was performed using hydrodistillation which is the most common extraction technique. Its components and thermal behavior were evaluated using gas chromatography (GC) and differential scanning calorimetry (DSC), which provide a better characterization of these natural compounds. This extracted product was compared to the standard eugenol results. The GC results suggested similar to 90% eugenol was found in the total extracted oil, and some of its boiling characteristics were 270.1 A degrees C for peak temperature and 244.1 J g(-1) for the enthalpy variation.

Att vårda patienter i rättspsykiatrisk vård som uppvisar självskadebeteende : sjuksköterskors erfarenheter och upplevelser

Deliberate self harm as defined pathologically as well as socially is becoming an increasing phenomenon within forensic psychiatry. Nurses working with patients who have self harm behaviour and are confined to forensic psychiatry face different challenges which affect their feelings and attitudes in different ways, in their nursing practice. Purpose: To explore nurses’ experiences of caring for patients who suffer from deliberate self harm behaviour and are confined to forensic psychiatry. Method: Qualitative semi- structured interview s from eight nurses working within the forensic psychiatric clinic. Interviews were analysed by using a qualitative content analysis. Results: They worked strategically and emphasized the importance of teamwork, good communication and urged for the need to get necessary education, staff focused tutoring and patient focused therapy. Conclusion: Need for necessary education, patient focused therapy and staff focused tutor is needed to empower staff working with patients who are confined within forensic psychiatry and suffer from deliberate self harm behaviour.

Vem är den ekonomiske brottslingen? : En jämförelse mellan länder och brottstyper

Who is the economic criminal? A comparison between countries and types of crime In white collar crime research two particularly competing definitions (Sutherland versus the Revisionists) have dominated the field during the last two decades. Sutherland’s definition states that the sociodemographic profile is homogeneous (entrepreneur with high education and high or regular income), despite type of white collar crime or context. The definition given by the Revisionists states that white collar criminals’ demographic profile is heterogeneous (everyone can be convicted for white collar crime). As a consequence of this divided definitional approach we have a contradictive outcome of who the white collar criminal is. Our purpose is to investigate the qualification of the two definitions by analyzing heterogeneity/ homogeneity based on crime type and national context. The investigation is based on seven countries from the EES 2004 (European Social Survey). We use four types of crime. The results show a rather homogeneous demographic profile but there is also a certain substantial heterogeneity depending on kinds of crime and context. The results altogether indicate that the Revisionists’ definition is more correct in its description of the white collar criminal than Sutherland’s definition. The demographic profile of the white collar criminal seems to be more complex than a profile confined to just one social category would be and the contextual factor has an impact on the variety of the demographic profile. An important task for future research is to hold the door open for further demographic investigations depending on the type of crime and country that the study is based on. 

Genrestratifiering och massmedias neutralisering av kritiken mot ADHD : Ett kunskapssociologiskt perspektiv

Genre stratification and the mass media’s neutralization of the critique of ADHD: A sociology of knowledge perspective This study examines how the Swedish mass media has dealt with the opposition against the neuropsychiatric diagnosis ADHD (Attention Deficit Hyperactivity Disorder). Drawing on empirical data from eight of the largest newspapers in Sweden (n=778 articles) the study focuses on the scientific controversy of DAMP, 2000–2006. DAMP (Dysfunction in Attention, Motor Control and Perception) is a diagnostic term denoting difficulties similar to ADHD, and which was used in Sweden at the time of the controversy. The study uncovers the ideological role played by the mass media during the DAMP-controversy, and demonstrates the significance of genre. While the spokespersons for DAMP/ADHD were given exclusive and systematic access to the news genre, the forum of fact-production in the mass media, the critics of DAMP/ADHD were confined to arguing and expressing their opinions in the debate genre. Based on the various effects of genre differences a comprehensive analytical tool for the sociology of knowledge, called genre stratification, is developed in the study 

Adiabatic propagation in potential structures

In this work the adiabatic approximation is applied to the propagation of matter waves in confined geometries like those experimentally realized in recent atom optical experiments. Adiabatic propagation along a channel is assumed not to mix the various transverse modes. Nonadiabatic corrections arise from the potential squeezing and bending. Here we investigate the effect of the former. Detailed calculations of two-dimensional propagation are carried out both exactly and in an adiabatic approximation. This offers the possibility to analyze the validity of adiabaticity criteria. A semiclassical (sc) approach, based on the sc Massey parameter is shown to be inadequate, and the diffraction due to wave effects must be included separately. This brings in the Fresnel parameter well known from optical systems. Using these two parameters, we have an adequate understanding of adiabaticity on the system analyzed. Thus quantum adiabaticity must also take cognizance of the intrinsic diffraction of matter waves.

Statistical bound of genetic solutions to quadratic assignment problems

Quadratic assignment problems (QAPs) are commonly solved by heuristic methods, where the optimum is sought iteratively. Heuristics are known to provide good solutions but the quality of the solutions, i.e., the confidence interval of the solution is unknown. This paper uses statistical optimum estimation techniques (SOETs) to assess the quality of Genetic algorithm solutions for QAPs. We examine the functioning of different SOETs regarding biasness, coverage rate and length of interval, and then we compare the SOET lower bound with deterministic ones. The commonly used deterministic bounds are confined to only a few algorithms. We show that, the Jackknife estimators have better performance than Weibull estimators, and when the number of heuristic solutions is as large as 100, higher order JK-estimators perform better than lower order ones. Compared with the deterministic bounds, the SOET lower bound performs significantly better than most deterministic lower bounds and is comparable with the best deterministic ones. 

Choreographic exploration of physical duress: motivation for and responses to exhaustion (a project in performance)

What motivates someone to dance until they are exhausted, sweaty, boiling hot and out of breath? I myself, recalling experiences when I have danced so hard I've nearly fainted, remember how exhilarating that motivation can be. But why? Why is that at all pleasant? Of course, I had several of my own explanations, but I was also interested in doing some scientific research on exhaustion. This question was of ample depth to become the basis of my project.

Mapeamento e caracterização geomecânica das unidades geotécnicas de solos oriundos dos granitos, gnaisses e migmatitos de Porto Alegre

O trabalho consta do estudo do meio físico geotécnico do município de Porto Alegre visando a identificação e caracterização de unidades geotécnias, formadas por associações de solos com características físico-morfológicas e origem semelhantes. As unidades geotécnicas são definidas por um estudo de escritório baseado em levantamentos geológicos, pedológicos, topográficos e geográficos e também com o auxílio de fotografias aéreas, acompanhado de uma investigação de campo com a amostragem de perfis das diferentes unidades estimadas. Uma carta com a ocorrência das unidades geotécnicas e com a representação das estruturas geológicas de maior importância geotécina é construída. Destaque é dado ás unidades geotécnicas de solos subtropicais oriundos dos granitos, gnaisses e migmatitos. E executada uma avaliação das características físicas (mineralogia, granulometria, plasticidade, e índices físicos) e propriedades geotécnicas (compressibilidade, colapsividade e resistência ao cisalhamento) dos solos dos principais horizontes de perfis típicos destas unidades. São utilizados ensaios de caracterização, análises mineralógicas de rochas por lâminas delgadas, análises mineralógicas de argilas por meio de difratograma de raio X, ensaios de compressão confinada e ensaios de cisalhamento direto. Os resultados são apresentados em função dos principais horizontes de solos das unidades geotécnicas , são eles horizontes saprolíticos, formados por solo residual que ainda apresentam minerais primários e vestígios estruturais da rocha de origem e horizontes superficiais muitas das vezes laterizados. A análise foi feita à luz dos processos de formação e dos decorrentes fatores que determinam o comportamento geotécnico destes solos de intemperismo subtropical.

Comportamento do aco inoxidavel ABNT 304 a corrosao-sob-tensao em solucoes aquosas neutras de nacl a temperatura de ebulicao utilizando a tecnica de carga constante

Estudou-se o comportamento do aço inoxidável ABNT 304 à corrosão-sob-tensão (C.S.T.) em soluções aquosas com 0,1%, 3,5% e 20% de NaCl, na temperatura de 103°C, através de ensaios de carga constante. Com auxílio das técnicas e conceitos de Mecânica de Fratura Linear Elástica e das análises eletroquímicas procurou-se encontrar as condições em que ocorre C.S.T. no sistema aço inoxidável austenítico/solução aquosa de NaCl a 103°C. Utilizou-se o corpo-de-prova do tipo dupla viga em balanço (T-notch double cantilever beam: TN-DCB), com intuito de observar a influência do fator de intensidade de tensão, concentração da solução e potencial eletroquímico. Estimou-se o valor do fator de intensidade de tensão limite (KICST) e a velocidade de propagação das trincas; também foram analisadas outras importantes características em termos mecanísticos. Definiu-se faixas de potenciais e valores de intensidade de tensão a partir dos quais ocorre o surgimento de trincas por C.S.T.. Fêz-se análises metalográficas dos corpos-de-prova onde se pode constatar trincas transgranulares bem típicas do fenômeno de C.S.T.. Foram feitos alguns testes em solução aquosa saturada de MgCl2, em ebulição, para se comparar as diferentes soluções quanto ao fenômeno de C.S.T.. Alterou-se as dimensões do corpo-de-prova para avaliar a orientação da propagação das trincas por C.S.T..