993 resultados para Catastrophes (Geology)


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Pyrenees are an alpine chain with hercynian basement rocks that outcrop in a large area called the Axial Zone. These rocks have been involved in the alpine deformation events although their main structural features resulted from the Hercynian orogeny. A relevant characteristic of the Hercynian basement is a change in structural style in depth which has been commonly studied and interpreted in the Pallaresa Anticlinorium, in the Central Pyrenees. This anticlinorium is a complex hercynian structural unit whose southern part belongs to the suprastructure whereas the northern part corresponds mostly to a transition zone between the infrastructure and the suprastructure. Rocks of the suprastructure show a steeply dipping slaty cleavage as the dominant structure, which is overprinting folds and thrusts rarely going with pervasive deformation. The transition zone results from a slaty cleavage, very often close to the bedding, overprinted by one or two steep crenulation cleavages. A gradual boundary exists between both structural levels and it can be observed that the deformation developing slaty cleavage in the suprastructure grades to a crenulation foliation in the transition zone. The gradual character of that boundary, as seen in the northern end of the transition zone, suggests that the southern sharp boundary is not original. That boundary is interpreted as a northward dipping inverse fault, possibly with Alpine age. That fault causes a relative uplift of the rocks of the transition zone and gives this sharp boundary with the suprastructural levels. It provokes the asymmetry in the Pallaresa anticlinorium

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Miocene Paine Granite in the Torres del Paine Intrusive Complex, southern Chile, is an extraordinary example of an upper crustal mafic and granitic intrusion. The granite intruded as a series of three sheets, each one underplating the previous sheet along the top of the basal Paine Mafic Complex. High-precision U/Pb geochronology on single zircons using isotope dilution-thermal ionization mass spectrometry yields distinct ages of 12.59 +/- 0.02 Ma and 12.50 +/- 0.02 Ma, respectively, for the first and last sheet of the laccolith. This age relationship is consistent with field observations. The zircon ages define a time frame of 90 +/- 40 k.y. for the emplacement of a >2000-m-thick granite laccollith. These precise U-Pb zircon ages permit identification of the pulses in a 20 k.y. range. The data obtained for the Paine Granite fill the gap between 100 k.y. and 100-1000 yr pulses described in the literature for crustal magma chambers.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We present the results of a geological and geotechnical characterization of the metallurgic waste from the Sierra Minera de Cartagena-La Union. We have studied eight tailings dams from which we collected and analysed 42 samples of metallurgic waste. We measured grainsize distribution, the specific gravity of solid particles, plasticity index, permeability, both in situ and in the laboratory, direct shear characteristicsand moisture content. According to size distribution the tailings can be classified as sandy silt. Their plasticity index ranges from medium to nil. The internal friction angle varies between 28 and 42 degrees. Cohesion is between 0 and 2.2 t/m2. The specific gravity of the solid particles ranges widely from 1.8 to 4 g/cm3. The saturated hydraulic conductivity values vary between 1.3x 10-5 and 3.2x 10-9 m/s.The water content measured in situ shows that the degree of saturation remains relatively high despite low rainfall and high evaporation rates. Several tailings dams have failed. The leading causes of tailings-dam failure are: 1) slope instability; 2) overflow; 3) erosion; and 4) subsidence or collapse. The main factor leading to dam failure is that the tailings stored in the ponds are highly saturated

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Learning activities outside the classroom in Earth Sciences are considered fundamental to achieve an adequate level of knowledge. New pedagogical perspectives, structured in competency-based activities, provide a useful tool to improve the effectiveness of field geology classes. In this paper, we point out some general educational aspects, and we propose a curriculum design focused on accomplishing the competencies that go with fieldtrips in Geology courses

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We review methods to estimate the average crystal (grain) size and the crystal (grain) size distribution in solid rocks. Average grain sizes often provide the base for stress estimates or rheological calculations requiring the quantification of grain sizes in a rock's microstructure. The primary data for grain size data are either 1D (i.e. line intercept methods), 2D (area analysis) or 3D (e.g., computed tomography, serial sectioning). These data have been used for different data treatments over the years, whereas several studies assume a certain probability function (e.g., logarithm, square root) to calculate statistical parameters as the mean, median, mode or the skewness of a crystal size distribution. The finally calculated average grain sizes have to be compatible between the different grain size estimation approaches in order to be properly applied, for example, in paleo-piezometers or grain size sensitive flow laws. Such compatibility is tested for different data treatments using one- and two-dimensional measurements. We propose an empirical conversion matrix for different datasets. These conversion factors provide the option to make different datasets compatible with each other, although the primary calculations were obtained in different ways. In order to present an average grain size, we propose to use the area-weighted and volume-weighted mean in the case of unimodal grain size distributions, respectively, for 2D and 3D measurements. The shape of the crystal size distribution is important for studies of nucleation and growth of minerals. The shape of the crystal size distribution of garnet populations is compared between different 2D and 3D measurements, which are serial sectioning and computed tomography. The comparison of different direct measured 3D data; stereological data and direct presented 20 data show the problems of the quality of the smallest grain sizes and the overestimation of small grain sizes in stereological tools, depending on the type of CSD. (C) 2011 Published by Elsevier Ltd.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We present a georeferenced photomosaic of the Lucky Strike hydrothermal vent field (Mid-Atlantic Ridge, 37°18’N). The photomosaic was generated from digital photographs acquired using the ARGO II seafloor imaging system during the 1996 LUSTRE cruise, which surveyed a ~1 km2 zone and provided a coverage of ~20% of the seafloor. The photomosaic has a pixel resolution of 15 mm and encloses the areas with known active hydrothermal venting. The final mosaic is generated after an optimization that includes the automatic detection of the same benthic features across different images (feature-matching), followed by a global alignment of images based on the vehicle navigation. We also provide software to construct mosaics from large sets of images for which georeferencing information exists (location, attitude, and altitude per image), to visualize them, and to extract data. Georeferencing information can be provided by the raw navigation data (collected during the survey) or result from the optimization obtained from imatge matching. Mosaics based solely on navigation can be readily generated by any user but the optimization and global alignment of the mosaic requires a case-by-case approach for which no universally software is available. The Lucky Strike photomosaics (optimized and navigated-only) are publicly available through the Marine Geoscience Data System (MGDS, http://www.marine-geo.org). The mosaic-generating and viewing software is available through the Computer Vision and Robotics Group Web page at the University of Girona (http://eia.udg.es/_rafa/mosaicviewer.html)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The eclogite facies assemblage K-feldspar-jadeite-quartz in metagranites and metapelites from the Sesia-Lanzo Zone (Western Alps, Italy) records the equilibration pressure by dilution of the reaction jadeite + quartz = albite. The metapelites show partial transformation from a pre-Alpine assemblage of garnet (Alm(63)Prp(26)Grs(10))-K-feldspar-plagioclase-biotite +/- sillimanite to the Eo-Alpine high-pressure assemblage garnet (Alm(50)Prp(14)Grs(35))-jadeite (Jd(80-97)Di(0-4)Hd(0-8)Acm(0-7))=zoisite-phengite. Plagioclase is replaced by jadeite-zoisite-kyanite-K-feldspar-quartz and biotite is replaced by garnet-phengite or omphacite-kyanite-phengite. Equilibrium was attained only in local domains in the metapelites and therefore the K-feldspar-jadeite-quartz (KJQ) barometer was applied only to the plagioclase pseudomorphs and K-feldspar domains. The albite content of K-feldspar ranges from 4 to 11 mol% in less equilibrated assemblages from Val Savenca and from 4 to 7 mol% in the partially equilibrated samples from Monte Mucrone and the equilibrated samples from Montestrutto and Tavagnasco. Thermodynamic calculations on the stability of the assemblage K-feldspar-jadeite-quartz using available mixing data for K-feldspar and pyroxene indicate pressures of 15-21 kbar (+/- 1.6-1.9 kbar) at 550 +/- 50 degrees C. This barometer yields direct pressure estimates in high-pressure rocks where pressures are seldom otherwise fixed, although it is sensitive to analytical precision and the choice of thermodynamic mixing model for K-feldspar. Moreover, the KJQ barometer is independent of the ratio P-H2O/P-T. The inferred limiting a(H2O) for the assemblage jadeite-kyanite in the metapelites from Val Savenca is low and varies from 0.2 to 0.6.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

En el proceso de inversión de la función de directividad para la obtención de la longitud de falla y velocidad de mptura, en el caso de terremotos de magnitud media, es muy dificil obtener ambos parámetros independientemente y deben hacerse hipótesis sobre uno de los dos parámetros. Proponemos una solución a este problema mediante un proceso iterativo, que iniciamos con un valor hipotético de la velocidad de ruptura. El resultado final resulta ser independiente del valor de partida. Mediante este proceso hemos obtenido la longitud de falla y velocidad de ruptura de dos terremotos, el del 18-nov-1970, ocurrido en la Dorsal Oriental del Pacifico, y el del 4-jul-1966, ocurrido en la Dorsal Centro-Atlántica. Para el sismo del 18-nov-1970 los valores obtenidos en la b = (18 4- 1) km v = (2.3 f 0.1) kmls y para el sismo del 4-jul-1966 b = (19 f 2) km, v = (2.1 i 0.1) kmls. Las desviaciones tipicas de estos parámetros, del orden del 5-10 %, son inferiores a las obtenidas en trabajos previos.

Relevância:

10.00% 10.00%

Publicador:

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Not only are we excited that Team Archaeology is back for our third ride, we are energized to be part of a “Human and Natural History” partnership that allows us expanded opportunities to share the story of Iowa’s amazing past. Once again there will be archaeologists along for the ride, as well as at Expo and this year at roadside locations Day One, Five and Six. Don’t hesitate to ask about the history of the first people to travel this landscape as well as the stories of each generation that has contributed to what we know of ourselves today. We will also feature information about the landscape and natural resources of Iowa you will encounter along the route through our partnering colleagues specializing in geology, hydrology, and other earth sciences. Enjoy using this booklet as your guide to the week’s activities and please help yourself to free materials from our outreach booth about our shared past and the natural world we depend on. Ride smart, be safe, and when you get home, be sure to tell your friends and neighbors about Iowa archaeology!