Insecticidal activity of chemical constituents from Aristolochia pubescens against Anticarsia gemmatalis larvae

Acetone and ethanol extracts of the tubercula and several compounds isolated from Aristolochia pubescens (Willd) were bioassayed on velvebean caterpillars, Anticarsia gemmatalis (Hubner), for evaluation of the insecticidal activities. of the extracts subjected to bioassay, the acetone extract showed the highest activity. (-)-Cubebin did not show activity against soybean caterpillars, whereas aristolochic acid and ent-kaur-15-en-17-ol increased the larval period. These compounds, and (+)-eudesmin and (+)-sesamin, reduced the viability of this period, giving rise to malformed adults. These extracts and compounds are therefore potential botanical insecticide agents for the control of velvetbean caterpillars in soybean crops. (C) 2003 Society of Chemical Industry.

Study of the morphological alterations to enamel and dentin in human and bovine teeth after irradiation with Er : YAG laser

Objective: the purpose of this study is to make use of scanning electron microscopy in order to comparatively analyze the morphological alterations to human and bovine enamel and dentin. Earlier data: Many a morphological study involving Er:YAG laser can be found in the literature. Still, not a single study comparing the effects of this infrared laser in human and bovine teeth has been reported. Materials and Methods: Thirty-two slices of human and bovine enamel and dentin were evenly divided into four groups. With the exception of the control group, the samples were irradiated with Er:YAG laser, focused at a distance of 12 mm and a 10-Hz frequency, with 150, 250, and 350 mJ of output energy per pulse for 10 seconds. After irradiation all specimens were observed under a scanning electron microscope. Results: There was practically no morphological difference for those samples that underwent 150 mJ/pulse irradiation. The dentin exposed to 250 mJ had a few open dentinal tubules. These were seen in enamel after a 350 mJ irradiation, in which the energy was able to reach the dentin. Conclusions: the breadth of this study allows us to state that the pattern between the species grew more heterogenous as the energy density was increased and that irradiation with 150 mJ/pulse resulted in greater likeness in human and bovine enamel and dentin.

Estimativa do Tamanho da Primeira Maturação Sexual da Rã - Touro, Rana catesbeiana, no Sistema Anfigranja de Criação Intensiva

The objective of this research was to study the basic aspects of bullfrog reproduction in Anfigranja system from June 1989 to July 1990. For the 1493 animals involved in this experiment (657 males and 836 females) biometrical data were obtained (weight, length and tympanum diameter) and developmental stages of gonads were determined. Female sizes at first maturation were 10,33 cm and 109,78 g and for males it was around 8,09 cm; all males above 45 g were already in the maturation process. The relationship between tympanum diameter and body length (RTC) was considered a good index for male maturation.

SCANNING ELECTRON-MICROSCOPY OF THE RHODNIUS-NEGLECTUS (HEMIPTERA) LABIAL SALIVARY-GLANDS AFTER STARVATION

Labial salivary glands are found in the majority of insects. They are relatively large, extend back into the thorax, and in Rhodnius, they are cherry red in color due to a pigment derived from traces of hemoglobin absorbed form the gut. In most insects they are acinous shaped, with long excretion channels that present differentiated regions which from salivary reservoirs. The glands may be relatively simple or complexly branched and convoluted. In Rhodnius they are described as being unilobed with no traces of division. The main duct leaves the gland at its anterior extremity. The acini have different kinds of cells but all of them are seen as sources of secretion. Our material has a different shape due to the fact that the animals spent 20 days under starvation conditions. New data are also obtained through treatment with collagenase and HCl. The importance of the study of these glands lies in the fact that it will further understanding of the transmission of Chagas' disease.

Ultrastructural and histochemical examination of alveolar bone at the pressure areas of rat molars submitted to continuous orthodontic force

It is usually believed that repair in alveolar bone during orthodontic movement occurs after decreasing of force. However, we have recently observed signs of repair in previously resorbed cementum from human teeth exposed to continuous forces. In order to test the hypothesis that bone resorption and deposition occur concomitantly at the pressure areas, a continuous 15 cN force was applied in a buccal direction to upper first molars from eight 2.5-month-old male Wistar rats for 3 d (n=4) and 7 d (n=4). As a control, two additional rats did not have their molars moved. Maxillae were fixed in 2% glutaraldehyde + 2.5% formaldehyde, under microwave irradiation, decalcified in ethylenediaminetetraacetic acid, and processed for transmission electron microscopy. Specimens from one rat from each group were processed for tartrate-resistant acid phosphatase (TRAP) histochemistry. At both the times studied, the alveolar bone surface at the pressure areas showed numerous TRAP-positive osteoclasts, which were apposed to resorption lacunae. In addition, osteoblasts with numerous synthesis organelles were present in the neighboring areas overlying an organic matrix. Thus, this study provides evidence that the application of continuous forces produces concomitant bone resorption and formation at the pressure areas in rat molars.

Epstein-Barr virus (EBV) nuclear antigen (EBNA)-4 mutation in EBV-associated malignancies in three different populations

Different ethnic groups with a high human leukocyte antigen (HLA)-A11 prevalence have been shown to experience a high rate of Epstein-Barr virus (EBV) infection, EBV-associated malignancies, and Epstein-Barr nuclear antigen (EBNA)-4 mutations. The epitopes 393-408 and 416-424 of EBNA-4 are major antigenic epitopes that elicit an HLA-A11 cytotoxic T lymphocyte (CTL) response to EBV infection. Mutations selectively involving one or more nucleotide residues in these epitopes affect the antigenicity of EBNA-4, because the mutant EBV strains are not recognized by the HLA-A11-restricted CTLs. To investigate these mutations in common EBV-associated malignancies occurring in different populations, we studied the mutation rate of epitopes 393-408 and 416-424 of EBNA-4 in 25 cases of EBV-associated Hodgkin's disease (HD), nine cases of AIDS-related non-Hodgkin's lymphoma, and 37 cases of EBV-associated gastric carcinoma (GC) from the United States, Brazil, and Japan. We found one or more mutations in these two epitopes in 50% (6/12) of United States HD, 15% (2/13) of Brazilian HD, 50% (6/12) United States GC and 28% (7/25) Japanese GC, and 22% (2/9) of United States AIDS-lymphoma. Similar mutations were found in 30% (3/10) of United States reactive, 0% (0/6) of Brazilian reactive, and 25% (2/8) Japanese reactive tissues. The most frequent amino acid substitutions were virtually identical to those seen in previously reported isolates from EBV-associated nasopharyngeal carcinomas and Burkitt's lymphomas occurring in high prevalence HLA-A11 regions. However, only 2/28 (7%) mutations occurred in HLA-A11-positive patients. Our studies suggest that: 1) EBNA-4 mutations are a common phenomenon in EBV-associated HD, GC, and AIDS-lymphoma; 2) the mutation rate does not vary in these geographic areas and ethnic groups; 3) EBNA-4 mutations in EBV-associated United States and Brazilian HD, United States and Japanese GC, and United States AIDS lymphomas are not related to patients' HLA-A11 status.

Placentation in the capybara (Hydrochaerus hydrochaeris), agouti (Dasyprocta aguti) and paca (Agouti paca)

Placentae of three hystricimorph rodents-capybara, agouti and paca-were examined by conventional histology, immunohistochemistry for cytokeratin and vimentin, and TUNEL staining. The placentae were divided into lobules of labyrinthine syncytium separated by interlobular and marginal trophoblast. The subplacenta comprised cytotrophoblasts, supported on lamellae of allantoic mesoderm, and syncytiotrophoblast. The central excavation was still apparent in the definitive placenta of capybara. In agouti and paca, the decidua of the junctional zone formed a mesoplacenta comprising a capsule and a pedicle. Towards term the pedicle formed a tenuous attachment between placenta and uterine wall comprising a few maternal vessels surrounded by degraded tissue. In paca placenta, it was shown by TUNEL staining that breakdown of this tissue occurred by apoptosis. The visceral yolk sac was highly villous and, in agouti, the yolk sac villi were extremely long. Lateral to its attachment to the placenta, the fetal surface was covered with non-vascular yolk sac endoderm. A layer of spongiotrophoblast cells was interposed between the endoderm and the marginal trophoblast. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Expression of beta-human chorionic gonadotropin (beta-hCG) in non-trophoblastic elements of transitional cell carcinoma of the bladder: possible relationship with the prognosis.

Transitional cell carcinoma (TCC) of the bladder is a neoplasm with variability in its clinical behavior. Although there are several studies correlating stage and ABO isoantigen expression with invasiveness, there is no single predictor factor to assess the potential invasiveness, especially in the low grade, non-invasive TCC. In the present study we evaluated the correlation of histological grade plus stage and the expression of beta human chorionic gonadotropin (beta-hCG), in 100 cases of TCC, with the clinical behavior. These features were correlated with tumor progression in patients with at least two years of follow up. We observed more aggressiveness in G4 group (high grade and invasive) (93% had tumor progression) when compared to G1 group (low grade and superficial) (11% had tumor progression). However in 25.5% of the TCC cases (groups G2: low grade and invasive and G3: high grade and superficial) the clinical behavior was intermediate, showing some limitation in using grading and staging only, as a predictive factor. There was an expression of beta-hCG in 21.4% of the cases in up to 25% of the tumor cells without any trophoblastic morphology. These beta-hCG producing TCC had a strong correlation with aggressiveness: 39.1% and 12.8% of the TCC expressed beta-hCG with and without tumor progression, respectively.

Degradabilidade ruminal do amido de silagem de milho, farelo de soja e sorgo grão, em bovinos da raça Nelore

Four Bos indicus (Nellore) ruminally-fistulated animals, averaging 36 months of age and 520 kg, were used in a randomized block design to study the ruminal degradability of starch in corn silage, soybean meal, and sorghum grain. The experimental diets consisted of two levels of concentrate (18 and 39%) plus corn silage. The concentrate ingredients used were soybean meal, cottonseed meal, corn grain, and sorghum grain. The degradation rate of sorghum grain increased 40.2% in diet 2 . The potential degradability of starch (PDS) was similar in the two diets. There was no difference between the two diets in the effective degradability of starch (EDS) in corn silage. There was a significant increase of 26.5% in the EDS of starch in sorghum grain with the increase of level of concentrate in the diet, and considering the lag time in the calculation. The starch level estimated in this study was lower than the values cited in the literature, probably due to different laboratory methods for determining the starch content in feedstuffs. Previous studies suggested using a minimum of 6 incubation intervals between 2 and 24 hours.

X̄ Charts with Variable Parameters

Varying the parameters of the X̄ chart has been explored extensively in recent years. In this paper, we extend the study of the X̄ chart with variable parameters to include variable action limits. The action limits establish whether the control should be relaxed or not. When the X̄ falls near the target, the control is relaxed so that there will be more time before the next sample and/or the next sample will be smaller than usual. When the X̄ falls far from the target but not in the action region, the control is tightened so that there is less time before the next sample and/or the next sample will be larger than usual. The goal is to draw the action limits wider than usual when the control is relaxed and narrower than usual when the control is tightened. This new feature then makes the X̄ chart more powerful than the CUSUM scheme in detecting shifts in the process mean.

Dental implants: Surface modification of cp-Ti using plasma spraying and the deposition of hydroxyapatite

The commercial pure titanium (cp-Ti) is currently being used with great success in dental implants. In this work we investigate how the cp-Ti implants can be improved by modifying the metal surface morphology, on which a synthetic material with properties similar to that of the inorganic part of the bone, is deposited to facilitate the bone/implant bonding. This synthetic material is the hydroxyapatite, HA, a calcium-phosphate ceramic. The surface modification consists in the application of a titanium oxide (TiO2) layer, using the thermal aspersion - plasma spray technique, with posterior deposition of HA, using the biomimetic method. The X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray (EDX) and Diffuse Reflectance Infrared Fourier Transform (DRIFT) techniques have been used for characterizing phases, microstructures and morphologies of the coatings. The TiO2 deposit shows a mixture of anatase, rutilo and TiO2-x phases, and a porous and laminar morphology, which facilitate the HA deposition. After the thermal treatment, the previously amorphous structured HA coating, shows a porous homogeneous morphology with particle size of about 2-2.5 μm, with crystallinity and composition similar to that of the biological HA.

A method for the digital image analysis of ceramic grains based on shape factor segmentation

A very simple and robust method for ceramics grains quantitative image analysis is presented. Based on the use of optimal imaging conditions for reflective light microscopy of bulk samples, a digital image processing routine was developed for shading correction, noise suppressing and contours enhancement. Image analysis was done for grains selected according to their concavities, evaluated by perimeter ratio shape factor, to avoid consider the effects of breakouts and ghost boundaries due to ceramographic preparation limitations. As an example, the method was applied for two ceramics, to compare grain size and morphology distributions. In this case, most of artefacts introduced by ceramographic preparation could be discarded due to the use of perimeter ratio exclusion range.

The influence of the sintering system on PMN properties

PMN powder samples with PbO excess of 0, 1,2 and 3% were submitted to the pressing and sintering at 1200°C for 4h with a heating rate of 3°C/min. A new sintering system, developed at our laboratories, was used. It allows obtaining more information on the sintering process. The sintered samples in the new system were compared to sintered samples in the C system. The microstructure, dielectric properties and the effect of the PbO excess in different sintering systems were compared. The N system permitted to obtain a ceramic with better properties, such density, dielectric constant and very homogeneous microstructure.

Spectroscopic studies of SnO2 doped with Cr, Co or Nb

SnO2 ceramics doped with different amounts of Co, Cr or Nb were investigated using visible and infrared spectroscopy at room temperature. Based on the observed d-d transitions the valence states of incorporated dopants were determined. Values of the optical band-gap were calculated in all samples. The infrared spectra of the samples displayed variations in the position, relative intensity and width of the bands, which were attributed to the presence of dopants.

Water table effects on bean yield and nitrate distribution in the soil profile

In order to evaluate the bean yield under different water table levels as well as the moisture and nitrate distribution in the soil profile, a field experiment was carried out at the experimental area from the College of Agronomic Sciences - UNESP, Botucatu, SP, Brazil. Beans were grown in field lysimeters and subjected to five water table depths:30; 40; 50; 60 and 70 cm. The moisture in the soil profile was gravimetrically determined through samples obtained at 10; 20; 30; 40; 50; 60 and 70cm of depth. The water table depths of 30cm and 40cm showed the highest productivities (3,228.4 kg.ha-1 and 3,422.1 kg.ha-1, respectively), showing no statistical differences between each other. The highest productivity was related to the two most elevated water table levels (30 and 40cm), which provided the highest moisture average values on basis of volume in the soil profile (33.3 e 31%) as well as the consumptive use of water (416 and 396 mm). The nitrate content during the bean cycle at the extraction depth of 60cm has been under the safe drinking limit of 10 mg.1-1 for water table depths of 30; 40; 50 and 60cm, showing the denitrification effectiveness as a way of controlling water table from nitrate pollution. The water table handling allowed the attainment of high bean productivity levels, as well as the reduction of the nitrate level.