Performance-based structural fire design and testing of structures

Fire incident in buildings is common in Hong Kong and this could lead to heavy casualties due to its high population density, so the fire safety design of the framed structure is an important research topic. This paper describes a computer tool for determination of capacity of structural safety against various fire scenarios and the well-accepted second-order direct plastic analysis is adopted for simulation of material yielding and buckling. A computer method is developed to predict structural behaviour of bare steel framed structures at elevated temperatures but the work can be applied to structures made of other materials. These effects of thermal expansion and material degradation due to heating are required to be considered in order to capture the actual behavior of the structure under fire. Degradation of material strength with increasing temperature is included by a set of temperature-stress-strain curves according to BS5950 Part 8 mainly, which implicitly allows for creep deformation. Several numerical and experimental verifications of framed structures are presented and compared against solutions by other researchers. The proposed method allows us to adopt the truly performance-based structural fire analysis and design with significant saving in cost and time.

Chasing the great Australian dream : definition of "an ideal home" among baby boomers

In Australia, the idea of home ownership or The Great Australian Dream is still perceived as the main achievement of every Australian’s life. Perception of an ideal home is changing over the decades. Each generation has special requirements criteria which foster their dwelling space. This research identifies and compares three generations’ (Baby Boomers, Generation X and Generation Y) demographics, special requirements and perceptions regarding their ideal home. The examination of previous research and literature into the Queensland context reveals that the Baby Boomers population of people 65 and older is currently 11.8% of the state population and is expected to grow to almost one quarter of the population by 2051. This is the highest growth rate among these three generations. Further analysis of these three generations’ status and requirements shows that aging is the most critical issue for the housing systems. This is especially the case for Baby Boomers due to their demand for support services and health care in the home. The study reveals that ‘ageing in place’, is a preferred option for the aged. This raises questions as to how well the housing system and neighbourhood environments are able to support ageing in place, and what aging factors should be taken into consideration when designing Baby boomer’s home to facilitate health and wellbeing. Therefore, this research designed a qualitative approach to investigate Australian Baby Boomers homes around Queensland, predominantly in the Brisbane area, using semi-structured interviews and observations. It aims to find out the level of satisfaction of Australian Baby Boomers with their current home and their preferences and requirements in light of their ideal home. The findings contribute new knowledge in the light of ideal home mechanisms. A set of strategies has been developed from the findings that may help improve the level of comfort, safety and satisfaction that Baby Boomers experience in their current and future homes.

Experimental and numerical characteristics of portable water-filled road safety barrier system under different impact conditions

This research has developed an innovative road safety barrier system that will enhance roadside safety. In doing so, the research developed new knowledge in the field of road crash mitigation for high speed vehicle impact involving plastic road safety barriers. This road safety barrier system has the required feature to redirecting an errant vehicle with limited lateral displacement. Research was carried out using dynamic computer simulation technique support by experimental testing. Future road safety barrier designers may use the information in this research as a design guideline to improve the performance and redirectional capability of the road safety barrier system. This will lead to better safety conditions on the roadways and potentially save lives.

An outcome evaluation of the ‘Skipper’ designated driver program

The general aim of designated driver programs is to reduce the level of drink driving by encouraging potential drink drivers to travel with a driver who has abstained from (or at least limited) consuming alcohol. Designated driver programs appear to be quite widespread around the world, however a limited number have been subject to rigorous evaluation. This paper reports results from an outcome evaluation of a designated driver program called ‘Skipper’, which was trialled in a provincial city in Queensland, Australia. The outcome evaluation included surveys three weeks prior to (baseline), four months following (1st follow-up), and 16 months following (2nd follow-up) the commencement of the trial in both the ‘intervention area’ (baseline, n = 202; 1st follow-up, n = 211; 2nd follow-up, n = 200) and a ‘comparison area’(baseline, n = 203; 1st follow-up, n = 199; 2nd follow-up, n = 201); and a comparison of random breath testing and crash data before and after the trial. The survey results indicate that awareness of the program in the intervention area was quite high four months following its introduction and that this was maintained at 16 months. The results also suggest that the ‘Skipper’ program and the related publicity had positive impacts on behaviour with an increase in the proportion of people participating in designated driver as a passenger. It is less clear, however, whether the ‘Skipper’ program impacted on other behaviours of interest, such as drink driving or involvement in alcohol-related crashes. Suggestions for further research and program improvement are discussed as well as limitations of the research.

Revolute joint approach to model joint mechanism in water-filled road safety barriers

Portable water-filled road barriers (PWFB) are roadside structures placed on temporary construction zones to separate work site from traffic. Recent changes in governing standards require PWFB to adhere to strict compliance in terms of lateral displacement and vehicle redirectionality. Actual PWFB test can be very costly, thus researchers resort to Finite Element Analysis (FEA) in the initial designs phase. There has been many research conducted on concrete barriers and flexible steel barriers using FEA, however not many was done pertaining to PWFB. This research probes a new technique to model joints in PWFB. Two methods to model the joining mechanism are presented and discussed in relation to its practicality and accuracy. Moreover, the study of the physical gap and mass of the barrier was investigated. Outcome from this research will benefit PWFB research and allow road barrier designers better knowledge in developing the next generation of road safety structures.

Impact and energy absorption of portable water-filled road safety barrier system fitted with foam

Portable water-filled barriers (PWFBs) are roadside appurtenances that are used to prevent errant vehicles from penetrating into temporary construction zones on roadways. A numerical model of the composite PWFB, consisting of a plastic shell, steel frame, water and foam was developed and validated against results from full scale experimental tests. This model can be extended to larger scale impact cases, specifically ones that include actual vehicle models. The cost-benefit of having a validated numerical model is significant and this allows the road barrier designer to conduct extensive tests via numerical simulations prior to standard impact tests Effects of foam cladding as additional energy absorption material in the PWFB was investigated. Different types of foam were treated and it was found that XPS foam was the most suitable foam type. Results from this study will aid PWFB designers in developing new generation of roadside structures which will provide enhanced road safety.

Effect of joint mechanism on vehicle redirectional capability of water-filled road safety barrier systems

Portable water-filled barriers (PWFBs) are roadside appurtenances that prevent vehicles from penetrating into temporary construction zones on roadways. PWFBs are required to satisfy the strict regulations for vehicle re-direction in tests. However, many of the current PWFBs fail to re-direct the vehicle at high speeds due to the inability of the joints to provide appropriate stiffness. The joint mechanism hence plays a crucial role in the performance of a PWFB system at high speed impacts. This paper investigates the desired features of the joint mechanism in a PWFB system that can re-direct vehicles at high speeds, while limiting the lateral displacement to acceptable limits. A rectangular “wall” representative of a 30 m long barrier system was modeled and a novel method of joining adjacent road barriers was introduced through appropriate pin-joint connections. The impact response of the barrier “wall” and the vehicle was obtained and the results show that a rotational stiffness of 3000 kNm/rad at the joints seems to provide the desired features of the PWFB system to re-direct impacting vehicles and restrict the lateral deflection. These research findings will be useful to safety engineers and road barrier designers in developing a new generation of PWFBs for increased road safety.

Team change climate : a group-level analysis of the relationships among change information and change participation, role stressors, and well-being

We explored whether teams develop shared perceptions regarding the quantity and quality of information and the extent of participation in decision making provided in an environment of continuous change. In addition, we examined whether change climate strength moderated relationships between change climate level and team outcomes. We examined relationships among aggregated change information and change participation and aggregated team outcomes, including two role stressors (i.e., role ambiguity and role overload) and two indicators of well-being (i.e., quality of worklife and distress). Questionnaires were distributed in an Australian law enforcement agency and data were used from 178 teams. Structural equation modelling analyses, controlling for a marker variable, were conducted to examine the main effects of aggregated change information and aggregated change participation on aggregated team outcomes. Results provided support for a model that included method effects due to a marker variable. In this model, change information climate was significantly negatively associated with role ambiguity, role overload, and distress, and significantly positively associated with quality of worklife. Change participation climate was significantly positively associated with quality of worklife. Change climate strength did not moderate relationships among change climate level and team outcomes.

Self-labelling versus behavioural experience of workplace bullying : differences in sector- and industry-level prevalence and sources

This study reports on differences in self-labelling versus the behavioural experience of workplace bullying across sectors and industries for a sample of 6,406 Australian employees, as well as differences in source of workplace bullying. It was found that overall prevalence rates of workplace bullying were 2.9% (self-labelling method) and 4.0% (behavioural experience method). Exposure to workplace bullying was found to decrease with age. There was no significant difference between the public and private sectors, or among industries, in the prevalence of workplace bullying; however, two industries (Construction; Health and Community Services) showed a significantly higher rate of workplace bullying with the behavioural experience method compared to the self-labelling method. For the overall sample, the most prevalent source of workplace bullying was reported to be coworkers (49.1%), followed by clients (35.7%), and then supervisors (27.4%). Subordinates were rated as the source in 7.9% of cases. Closer examination of source as a function of sector and industry revealed a number of significant differences specific to sectors and industries, highlighting the need for tailored approaches for managing workplace bullying.

Young and Well CRC: Engaging young people as research partners

This paper presents the outcomes of an international collaboration between researchers and young people in Australia and the United States, using participatory design to engage young people as research partners in the collaborative development of a conceptual framework for the Online WellBeing Center (OWBC), a repository of evidence-based mental health tools focused on mental health promotion and the prevention of mental illness developed as part of Young and Well Cooperative Research Centre. Eighteen participants (nine in Australia and nine in USA) were involved as key partners through a series of participatory design workshops to develop the framework for the OWBC. Key objectives of the collaboration included an increased understanding of: how to recruit young people to be part of an international project team collaborating remotely; how to use new technologies to manage communication and maintain engagement; how to apply principles of participatory research to create a youth informed research project; how to develop an international stakeholder partnership to ensure relevancy in value systems, cultural orientation and project outcomes. Recommendations included guidelines for how others can establish international collaborations that integrate young people as active project participants.

Ray's Night Out

Research Background: The proliferation of technologically-based interventions and mHealth in particular have led to a need for innovative, relevant and engaging ways of presenting health messages to young people using technology. ‘Ray’s Night Out’ is a mobile health application co-designed with young people by an interdisciplinary team of researchers at Queensland University of Technology. Research Questions: The design, research, development and evaluation of ‘Ray’s Night Out’ addressed a number of research questions from across the fields of Psychology and Interactive and Visual Design. The specific design research questions addressed were: How can a mobile intervention be best designed to promote young people’s safety and wellbeing and minimise harm when consuming alcohol on a typical night out? Specifically, how can principles of interactive and visual design be effectively applied to develop innovative digital health communication solutions that empower young people as active participants in improving their health and wellbeing? Research Contribution: Innovation The mobile app, as a digital artifact, represents a new way of engaging young people in the issue of alcohol consumption and the pacing and self-care behaviours through unique interaction, visual and interface designs which resulted from the participant-led and iterative design research process. The design of the specific interactive and visual features of the app informed by participatory design data and by health research present a novel approach to preventing young people in crossing the ‘stupid line’ on a typical night out. Research Significance: The significance of the design research component within the larger interdisciplinary practices that have informed ‘Ray’s Night Out’ (e.g. field of psychology, reported through journal articles and other related outcomes), is the unique visual and interactive presentation of participant data and health concepts within the app interface and interaction design which improves and increases young people’s engagement with the health messages it contains. The global quality standard is further demonstrated by the launch on Apple iTunes: https://itunes.apple.com/us/app/rays-night-out/id978589497?mt=8 This demonstrates the application meets the high professional requirements for global release and international standards set by Apple AppStore.

Australia lawyer well-being : workplace demands, resources and the impact of time-billing targets

The purpose of the present study was to examine the types of workplace demands and resources experienced by full-time Australian lawyers, and the prevalence of a range of psychological outcomes. The study further focussed on the impact of time-billing targets on lawyers’ experience of these variables. Participants were 384 full-time Australian lawyers who completed an online questionnaire distributed by their Australian State or Territory Law Society. Analysis revealed that emphasis on profits within the workplace was the highest perceived demand, and the perception of social value in their work was the highest available resource. The results indicated that 37% of participants displayed Moderate to Extremely Severe depressive symptoms, and 35% were a positive screen for hazardous or harmful drinking. A series of three multivariate analyses of variance revealed significant differences between non-billers, low-to-moderate billers and high billers, with high billers experiencing greater demands, fewer resources and poorer psychological outcomes. The practical applications of these results for the legal profession are discussed.

Occupational health psychology

In this chapter, the occupational stress process and implications for the management of occupational health and safety in organisations are discussed. The chapter begins by introducing occupational stress as a process by which stressors (e.g. time pressure) result in strains (e.g. ill health). The consequences of stress, to both the individual and the organisation are discussed, and several key sources of occupational stress are also described. Theories of occupational stress that attempt to explain how stressors lead to strain and also describe different job resources (e.g. autonomy, support, and security) that can alleviate the detrimental effects of occupational stressors are then presented. The management of occupational stress at both the individual and organisational levels is also discussed. In the subsequent section, work-life balance and various ways work impacts on life and vice versa are described. The management of work-life conflict and the effectiveness of initiatives designed to address imbalance between work and life are then discussed. Finally, occupational health and safety is described with a particular focus on primary prevention as well as the legislative frameworks that guide psychosocial risk management in Australian organisations.

Can the use of quality assurance tools reduce the impact of surgical complications on the well-being of obstetricians and gynaecologists in Australia and New Zealand?

Background While adverse events primarily affect the patient, surgeons involved can also experience considerable distress. Aims The aim of the survey was to assess the impact of complications on the day-to-day life, work and health of Australian and New Zealand obstetricians and gynaecologists and to evaluate existing support systems and coping strategies. Methods A 43-question survey on self-assessment, quality assurance (QA) tools, impact of complications on individuals’ health and relationships, and support available was emailed to fellows, trainees, subspecialists and subspecialty trainees of the Royal Australian and New Zealand College of Obstetrics and Gynaecology (RANZCOG). We collected 606 responses from a target population of 2296 (response rate 26.3%). Results When complications occur, sleep was affected of 80%, family and social relationships of 55% and physical health of 48% of respondents. The major sources of support were from colleagues (83%), family (82%) and medical defence organisations (73%), with professional bodies perceived as providing least support. Nearly 80% of respondents felt the need to talk to someone they trust during times of complications. Overall, 100% of respondents used at least one QA tool (62% used two, 26% three and 9% four QA strategies). There were significant differences between respondent groups in use of the QA tools. Conclusions Surgical complications have a significant impact on the well-being of Australian and New Zealand obstetricians and gynaecologists. Existing support comes from colleagues and family, but structured, unbiased support for surgeons from a professional source is urgently warranted.

Improving safety for driverless city vehicles : real-time communication and decision making

This paper elaborates on the Cybercars-2 Wireless Communication Framework for driverless city vehicles, which is used for Vehicle-to-Vehicle and Vehicle-to-Infrastructure communication. The developed framework improves the safety and efficiency of driverless city vehicles. Furthermore, this paper also elaborates on the vehicle control software architecture. On-road tests of both the communication framework and its application for real-time decision making show that the communication framework is reliable and useful for improving the safe operation of driverless city vehicles.