Avaliação da persistência de microrganismos patogênicos em solo cultivado com eucalipto e fertilizado com lodo de esgoto sanitário

Pós-graduação em Ciência Florestal - FCA

Desempenho de gotejadores usando efluente de esgoto tratado para irrigação

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Processo de produção de composto orgânico derivado de resíduos industriais com aplicação no cultivo de alface

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Inclusão de cana-de-açúcar triturada em biodigestores abastecidos com dejetos de bovinos de corte confinado

The objective of this study was toevaluatethe effect of the co-digestion of triturated sugarcane with beef cattlerfeddlotmanure in continuous digestorsin the amount and quality of biogas and biofertilizer. To do so, the work was divided in three steps. The first and the second part lasted30 days each and evaluated the effect of the additionof 7% of triturated sugarcane in agreement with the followingtreatments:treatment, the digestors were supplied with a mixture of 0,250 kg of manure and 1,750 kg of water ;treatment 2, the digestors were supplied with a mixture of 0,250 kg of manure, 1,610 kg of water, and 0,140 kg of triturated sugarcane. To The third period lasted 30 days and evaluated the effect of adding 3.5% of sugarcane crushed. The data analyses was performed with randomized designusing SAS®program with level of significance of 5%. The digesters with sugarcane produced in the first period respectively 0.79, 0.0127, and 0.102 m3of total production, of biogas production per kilogram of substrate, and of total production per kilogram of manure versus 0.5, 0.0081, and 0.065 m3from the control treatment, respectively..In the thirdperiod,each variable had a total production of 0.76, 0.123, and 0.98 m3and the control treatment yielded 0.51, 0.065, and 0.0082 m3.In the second period,the total production per kilogram of solidand of volatile solids added were higher in the digesters without sugarcane (0.0093 and 0.438 m3) when compared to the digesters that had additionof 7% of cane(0.271 and 0.336 m3).

Effect of natural antimicrobials on microbiological and sensorial quality of fresh-cut cantaloupe melon

The effect of different natural antimicrobials on the microbiological and sensorial quality of fresh-cut Cantaloupe melons stored up to 10 days at 5°C was examined. Pieces of melon were washed for 1 min at 5ºC in water (control), vanillin (1000 mg/L and 2000 mg/L) or cinnamic acid (148.16 mg/L and 296.32 mg/L). Other antimicrobial treatments consisted of packaging the pieces of melon with an antimicrobial pad which contained cinnamic acid (148.16 mg/L and 296.32 mg/L). After 10 days of storage, significant differences among antimicrobials treatments and water treatment were found. In water treatment, the psychrotroph load was 3.63 ± 0.09 log cfu g-1 meanwhile on all antimicrobial treatments the values ranged from 3.04 ±0.13 log cfu g-1 to 3.28±0.1 log cfu g-1. Mesophilic growth in the control treatment averaged 6.79±0.06 log cfu g-1 meanwhile on antimicrobial treatments the counts were from 5.15±0.01 log cfu g-1 to 5.30±0.03 log cfu g-1. Total coliform levels were 7.8±0.1 log cfu g-1 when melon was washed in water, followed by washing with cinnamon (296.32 mg/L) at 6.5 log cfu g-1 and for the rest of the treatments were around 5.5 log cfu g-1. The treatments did not display differences among mould and yeast growth after 10 days of storage. The sensorial quality decreased throughout storage. However, at the end of storage, the scores ranged between 6.5 and 7, above the minimum level for marketability (level 5). Sensorial panelist noted a ‘sweet’ taste when vanillin was used as sanitizer. In all antimicrobial treatments, no relation was found between a higher dose and a higher microbial reduction. So, vanillin at 1000 mg/L in water or cinnamic acid at 148.16 mg/L provided in water dip or as a pad inside the trays could be optimal natural sanitizers to substitute the use of chlorine in fresh-cut products as Cantaloupe melon.

Avaliação do soro de leite como coagulante do látex de borracha natural

Pós-graduação em Ciência dos Materiais - FEIS

Agua de reuso e seu efeito sobre parâmetros fisiológicos em manjericão (Ocimum basilicum L.)

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Agua de reuso e seu efeito sobre parâmetros fisiológicos em manjericão (Ocimum basilicum L.)

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Optimization of in situ derivatization SPME by experimental design for GC-MS multi-residue analysis of pharmaceutical drugs in wastewater

This paper presents the development of a procedure, which enables the analysis of nine pharmaceutical drugs in wastewater using gas chromatography-mass spectrometry (GC-MS) associated with solid-phase microextraction (SPME) for the sample preparation. Experimental design was applied to optimize the in situ derivatization and the SPME extraction conditions. Ethyl chloroformate (ECF) was employed as derivatizing agent and polydimethylsiloxane-divinylbenzene (PDMS-DVB) as the SPME fiber coating. A fractional factorial design was used to evaluate the main factors for the in situ derivatization and SPME extraction. Thereafter, a Doehlert matrix design was applied to find out the best experimental conditions. The method presented a linear range from 0.5 to 10 mu g/L, and the intraday and interday precision were lower than 16%. Applicability of the method was verified from real influent and effluent samples of a wastewater treatment plant, as well as from samples of an industry wastewater and a river.

Use of Gas Diffusion Electrode for the In Situ Generation of Hydrogen Peroxide in an Electrochemical Flow-By Reactor

Hydrogen peroxide is a powerful oxidant that finds application in several areas, but most particularly in the treatment of industrial wastewaters. The aim of the present study was to investigate the effects of applied potential and electrolyte flow conditions on the in situ generation of hydrogen peroxide in an electrochemical flow-by reactor with a gas diffusion electrode (GDE). The electrolyses were performed in an aqueous acidic medium using a GDE constructed with conductive black graphite and polytetrafluoroethylene (80:20 w/w). Under laminar flow conditions (flow rate = 50 L/h), hydrogen peroxide was formed in a maximum yield of 414 mg/L after 2 h at -2.25 V vs Pt //Ag/AgCl (global rate constant = 3.1 mg/(L min); energy consumption = 22.1 kWh/kg). Under turbulent flow (300 L/h), the maximum yield obtained was 294 mg/L after 2 h at -1.75 V vs Pt//Ag/AgCl (global rate constant = 2.5 mg/ (L min); energy consumption = 30.1 kWh/kg).

Unexpected toxicity decrease during photoelectrochemical degradation of atrazine with NaCl

This report shows an unexpected toxicity decrease during atrazine photoelectrodegradation in the presence of NaCl. Atrazine is a pesticide classified as endocrine disruptor occurring in industrial effluents and agricultural wastewaters. We therefore studied the effects of the degradation method, electrochemical and electrochemical photo-assisted, and of the supporting electrolyte, NaCl and Na2SO4, on the residual toxicity of treated atrazine solutions. We also studied the toxicity of treated atrazine solutions using Results show that at initial concentration of 20 mg L-1, atrazine was completely removed in up to 30 min using 10 mA cm(-2) electrolysis in NaCl medium, regardless of the electrochemical method used. The total organic carbon removal by the photo-assisted method was 82% with NaCl and 95% with Na2SO4. The solution toxicity increased during sole electrochemical treatment in NaCl, as expected. However, the toxicity unexpectedly decreased using the photo-assisted method. This finding is a major discovery because electrochemical treatment with NaCl usually leads to the formation of toxic chlorine-containing organic degradation by-products.

Microcystis aeruginosa lipids as feedstock for biodiesel synthesis by enzymatic route

The cyanobacterium Microcystis aeruginosa strain NPCD-1, isolated from sewage treatment plant and characterized as a non-microcystin producer by mass spectrometry and molecular analysis, was found to be a source of lipid when cultivated in ASM-1 medium at 25 degrees C under constant white fluorescent illumination (109 mu mol photon m(-2) s(-1)). In these conditions, biomass productivity of 46.92 +/- 3.84 mg L-1 day(-1) and lipid content of 28.10 +/- 1.47% were obtained. Quantitative analysis of fatty acid methyl esters demonstrated high concentration of saturated fatty acids (50%), palmitic (24.34%) and lauric (13.21%) acids being the major components. The remaining 50% constituting unsaturated fatty acids showed higher concentrations of oleic (26.88%) and linoleic (12.53%) acids. The feasibility to produce biodiesel from this cyanobacterial lipid was demonstrated by running enzymatic transesterification reactions catalyzed by Novozym (R) 435 and using palm oil as feedstock control. Batch experiments were carried out using tert-butanol and iso-octane as solvent. Results showed similarity on the main ethyl esters formed for both feedstocks. The highest ethyl ester concentration was related to palmitate and oleate esters followed by laurate and linoleate esters. However, both reaction rates and ester yields were dependent on the solvent tested. Total ethyl ester concentrations varied in the range of 44.24-67.84 wt%, corresponding to ester yields from 80 to 100%. Iso-octane provided better solubility and miscibility, with ester yield of 98.10% obtained at 48 h for reaction using the cyanobacterium lipid, while full conversion was achieved in 12 h for reaction carried out with palm oil. These results demonstrated that cyanobacterial lipids from M. aeruginosa NPCD-1 have interesting properties for biofuel production. (c) 2012 Elsevier B.V. All rights reserved.

DESENVOLVIMENTO E AVALIAÇÃO DE ELETRODOS DE DIFUSÃO GASOSA (EDG) PARA GERAÇÃO DE H2O2 IN SITU E SUA APLICAÇÃO NA DEGRADAÇÃO DO CORANTE REATIVO AZUL 19

DEVELOPMENT AND EVALUATION OF GAS DIFFUSION ELECTRODES (GDE) FOR GENERATION OF H2O2 IN SITU AND THEIR APPLICATION IN THE DEGRADATION OF REACTIVE BLUE 19 DYE. This work reports the development of GDE for electrogeneration of H2O2 and their application in the degradation process of Reactive Blue 19 dye. GDE produced by carbon black with 20% polytetrafluoroethylene generated up to 500 mg L-1 of H2O2 through the electrolysis of acidic medium at -0.8 V vs Ag/AgCl. Reactive Blue 19 dye was degraded most efficiently with H2O2 electrogenerated in the presence of Fe(II) ions, leading to removal of 95% of the original color and 39% of TOC at -0.8 V vs Ag/AgCl.

Phenol degradation in an anaerobic fluidized bed reactor packed with low density support materials

The objective of this research was to study phenol degradation in anaerobic fluidized bed reactors (AFBR) packed with polymeric particulate supports (polystyrene - PS, polyethylene terephthalate - PET, and polyvinyl chloride - PVC). The reactors were operated with a hydraulic retention time (HRT) of 24 h. The influent phenol concentration in the AFBR varied from 100 to 400 mg L-1, resulting in phenol removal efficiencies of similar to 100%. The formation of extracellular polymeric substances yielded better results with the PVC particles; however, deformations in these particles proved detrimental to reactor operation. PS was found to be the best support for biomass attachment in an AFBR for phenol removal. The AFBR loaded with PS was operated to analyze the performance and stability for phenol removal at feed concentrations ranging from 50 to 500 mg L-1. The phenol removal efficiency ranged from 90-100%.

Anion dopant effects on the structure and performance of polyethersulfone membranes

In this work, the effect of various casting solution salt dopants with similar cations, but different anions: (NaPO3)(6), Na2SO4, Na2CO3, NaCl, and NaF, on the morphology and performance of polyethersulfone ultrafiltration membranes was evaluated. The phase inversion process was used to produce all membranes using an 18% polyethersulfone in n-methylpyrrolidone casting solution and water as the non-solvent. Scanning electron microscopy (SEM) images of the membrane cross-section and surface pores were used to determine the specific anion effects on membrane morphology. The SEM images depicted significant changes to the membrane internal structure and pore size with respect to the type and concentration of the casting solution anion dopant. Membrane permeability, molecular weight cut-off, alginate retention, and susceptibility to fouling were evaluated using ultrapure water dead-end and ultrapure water, aqueous polyethylene glycol, aqueous sodium alginate, and natural surface water cross-flow filtration tests. Among the anions evaluated, hexametaphosphate doped at 1% w/w to the polymer resulted in the membrane with highest dead-end permeability at 490 LMH-bar (2- to 3-fold greater than the control), greatest alginate retention at 96.5%, and lowest susceptibility to fouling. The significant increase in membrane performance indicates that the hexametaphosphate anion has great potential to be used as a membrane casting solution dopant. It was also clearly demonstrated that membrane pore morphological characteristics can be effectively used to predict drinking water treatment performance. (C) 2012 Elsevier B.V. All rights reserved.