Three-level inverter fed open-end winding IM drive with common mode voltage elimination and reduced power device count

A three-level space phasor generation scheme with common mode elimination and with reduced power device count is proposed for an open end winding induction motor in this paper. The open end winding induction motor is fed by the three-level inverters from both sides. Each two level inverter is formed by cascading two two-level inverters. By sharing the bottom inverter for the two three-level inverters on either side, the power device count is reduced. The switching states with zero common mode voltage variation are selected for PWM switching so that there is no alternating common mode voltage in the pole voltages as well as in phase voltages. Only two isolated DC-links, with half the voltage rating of a conventional three-level neutral point clamped inverter, are needed for the proposed scheme.

Futility and the law: Knowledge, practice and attitudes of doctors in end of life care

Despite the potential harm to patients (and others) and the financial cost of providing futile treatment at the end of life, this practice occurs. This article reports on empirical research undertaken in Queensland that explores doctors’ perceptions about the law that governs futile treatment at the end of life, and the role it plays in medical practice. The findings reveal that doctors have poor knowledge of their legal obligations and powers when making decisions about withholding or withdrawing futile treatment at the end of life; their attitudes towards the law were largely negative; and the law affected their clinical practice and had or would cause them to provide futile treatment.

Neutral-point balancing of neutral-point-clamped three-level inverter with a front end switched rectifier DC source for the full modulationn range

A switched rectifier DC voltage source three-level neutral-point-clamped (NPC) converter topology is proposed here to alleviate the inverter from capacitor voltage balancing in three-level drive systems. The proposed configuration requires only one DC link with a voltage of half of that needed in a conventional NPC inverter. To obtain a rated DC link voltage, the rectifier DC source is alternately connected in parallel to one of the two series capacitors using two switches and two diodes with device voltage ratings of half the total DC bus voltage. The frequency at which the voltage source is switched is independent of the inverter and will not affect its operation since the switched voltage source in this configuration balances the capacitors automatically. The proposed configuration can also be used as a conventional two-level inverter in the lower modulation index range, thereby increasing the reliability of the drivesystem. A space-vector-based PWM scheme is used to verify this proposed topology on a laboratory system.

Suomalaisten yritysten vapaaehtoinen sosiaalinen vastuu : Sidosryhmäviitekehys yritysten ja ulkoisten sidosryhmien edustajien näkemyksissä

Corporate social responsibility (CSR) is no longer only an issue of companies but a concern shared by e.g. the European Union, the International Labour Organization, labour market organizations and many others. This thesis examines what kind of voluntary corporate social responsibility exceeding the minimum level set in the legislation can be expected from the Finnish companies. The research was based on the interviews of some representatives of Finnish companies and of external stakeholders. Earlier Finnish empirical research on the topic has solely analysed the stakeholder thinking and the ethics of the views of the company representatives. The views of the external stakeholders brought ht up a much more versatile perspective on the voluntary corporate social responsibility of the companies. That is the particular surplus value of this research. This research, founded on stakeholder thinking, evaluated what kind of starting points and ideas on responsibility the views of the representatives of the companies and the external stakeholders were based on the voluntary social responsibility. Furthermore, the research also investigated how their views about the corporate social responsibility indicated the benefits achieved on the cooperative actions with different partners - for example companies, communities and public administration. To fulfil the aims of the research, the following questions were used as part tasks in mapping the basic foundations and starting points expressed by the representatives of the companies and the external stakeholders: 1) How do laws, directions concerning social responsibility of companies, and opinions and demands of the stakeholders guide and affect the voluntary corporate social responsibility? 2) How can companies assume voluntary corporate social responsibility in addition to their core functions and without compromising their profitability, and how does, for example, the tightening competition affect the possibility of taking responsibility? 3) What kind of ethic and moral foundations is the corporate social responsibility based on? 4) What kind of roles can companies have in securing and promoting the well-being of citizens in Finland and on the global market as one subsystem of the society? The views on the voluntary corporate social responsibility of nine big companies, one medium-sized company and one small company, all considered responsible pioneer companies, were studied with surveys and half-structured theme interviews between 2003 and 2004. The research proceeded as a theory-bounded study. The empirical material and the previous stakeholder thinking theories (Takala 2000b, Vehkaperä 2003) guided the thesis and worked abductively in interplay with each other during the research process. (Tuomi, Sarajärvi 2002.) The aims and the methods of the research and the themes of the interviews were defined on the basis of that information. The aims of the research were surveyed qualitatively with the strategy of a multiple case study. Representatives from nine big peer companies and nine external stakeholders were interviewed with half-structured themes between 2004 and 2005. The external stakeholders and the peer companies were chosen with the "thinking" of theoretical replication by Yin, according to which the views of the representatives of those groups would differ from those of the pioneer companies and also from those of each others. The multiple case study supports analysing the internal cohesion of the views of different groups and comparing their differences, and it supports theoretical evaluation and theory-building as well. (Yin 2003.) Another reason for choosing the external stakeholders was their known cooperation with companies. The spoken argumentations of the company and stakeholder representatives on the voluntary social responsibility of the companies were analysed and interpreted in the first place with an analytic discourse analysis, and the argumentations were classified allusively into the stakeholder discourses in three of the part tasks. In the discourse analysis, argumentations of the speech is seen to be intervowen with cultural meanings. (Jokinen, Juhila 1999.) The views of the representatives of the pioneer companies and the external stakeholders were more stakeholder-orientated than the views of the representatives of the peer companies. For the most part, the voluntary corporate social responsibility was seemingly targeted on single, small cooperation projects of the companies and external stakeholders. The pioneer companies had more of those projects, and they were participating in the projects more actively than the peer companies were. The significant result in this research was the notion that, in particular, the representatives of the pioneer companies and external stakeholders did not consider employing and paying taxes to be enough of reciprocal corporate social responsibility. However, they still wanted to preserve the Finnish welfare model, and the interviewees did not wish major changes in the present legislation or the social agreements. According to this study, the voluntary corporate social responsibility is motivated by ethical utilitarianism which varied from very narrow to very wide in relation to benefits achieved by companies and stakeholders (Velasquez 2002, Lagerspetz 2004). Compared with the peer companies, more of the representatives of the pioneer companies and of external stakeholders estimated that companies in their decision-making and operations considered not only the advantages and the benefits of the owners and other internal stakeholders, but also those of the external stakeholders and of the whole society. However, all interviewees expressed more or less strongly that the economic responsibility guides the voluntary responsible actions of the companies in the first place. This kind of utilitarian foundation of behaviour appeared from this research was named as business-orientated company moral. This thesis also presents a new voluntary corporate social responsibility model with four variables on the stakeholder discourses and their distinctive characteristics. The utilitarian motivation of a company s behaviour on their operations has been criticized on the grounds that the end justifies the means. It has also been stated that it is impossible to evaluate the benefits of the utilitarian type of actions to the individuals and the society. It is expected however that companies for their part promote the material and immaterial well-being of the individuals on the global, national and local markets. The expectations are so strong that if companies do not take into account the ethical and moral values, they can possibly suffer significant financial losses. All stakeholders, especially consumers, can with their own choices promote the responsible behaviour of the companies. Key words: voluntary corporate social responsibility, external stakeholders, corporate citizenship, ethics and morality, utilitarianism, stakeholder discourses, welfare society, globalisation

Vaikuttavuusyhteiskunta : Sosiaalisten olojen arvostelusta vaikutusten todentamiseen

Evaluation practices have pervaded the Finnish society and welfare state. At the same time the term effectiveness has become a powerful organising concept in welfare state activities. The aim of the study is to analyse how the outcome-oriented society came into being through historical processes, to answer the question of how social policy and welfare state practices were brought under the governance of the concept of effectiveness . Discussions about social imagination, Michel Foucault s conceptions of the history of the present and of governmentality, genealogy and archaeology, along with Ian Hacking s notions of dynamic nominalism and styles of reasoning, are used as the conceptual and methodological starting points for the study. In addition, Luc Boltanski s and Laurent Thévenot s ideas of orders of worth , regimes of evaluation in everyday life, are employed. Usually, evaluation is conceptualised as an autonomous epistemic culture and practice (evaluation as epistemic practice), but evaluation is here understood as knowledge-creation processes elementary to different epistemic practices (evaluation in epistemic practices). The emergence of epistemic cultures and styles of reasoning about the effectiveness or impacts of welfare state activities are analysed through Finnish social policy and social work research. The study uses case studies which represent debates and empirical research dealing with the effectiveness and quality of social services and social work. While uncertainty and doubts over the effects and consequences of welfare policies have always been present in discourses about social policy, the theme has not been acknowledged much in social policy research. To resolve these uncertainties, eight styles of reasoning about such effects have emerged over time. These are the statistical, goal-based, needs-based, experimental, interaction-based, performance measurement, auditing and evidence-based styles of reasoning. Social policy research has contributed in various ways to the creation of these epistemic practices. The transformation of the welfare state, starting at the end of 1980s, increased market-orientation and trimmed public welfare responsibilities, and led to the adoption of the New Public Management (NPM) style of leadership. Due to these developments the concept of effectiveness made a breakthrough, and new accountabilities with their knowledge tools for performance measurement and auditing and evidence-based styles of reasoning became more dominant in the ruling of the welfare state. Social sciences and evaluation have developed a heteronomous relation with each other, although there still remain divergent tendencies between them. Key words: evaluation, effectiveness, social policy, welfare state, public services, sociology of knowledge

Stor Anna, Liten Anna och tio andra personporträtt : Om innehållsliga och språkliga mönster i en mediegenres kvinnobeskrivningar

The aim of this licentiate thesis is to analyse how femininity is constructed in twelve portrait interviews of women in the dailies Dagens Nyheter (Stockholm) and Hufvudstadsbladet (Helsinki) in September 1996, and to explore the portrait interview as a media genre. The qualitative analysis has a feminist and constructionist perspective and is connected to critical text analysis. It was carried out on two levels: first, femininity is identified on the linguistic level by choice of words, and second on the level of content (topical motifs/themes). The portrait interview as a genre constitutes a third dimension in the analysis: The aim is not towards the identification of femininity, but rather towards the identification of the portrait interview a relatively unexplored media genre. References (Swedish: omtal) to the principal character (or protagonist) are traced mainly through reference chains which consist of names, pronouns and substantive phrases. The interviewees were referred to by their full names in Dagens Nyheter (with the exception of the oldest and youngest interviewees, both of whom were mainly referred to by their first names), while the style of reference varied more in Hufvudstadsbladet. The position of the principal character was also analysed through her relation in the text to minor characters from her working life and from her private life. These minor characters maintained their subordinate positions in all of the portraits except that of the youngest principal character, in which the subsidiary voices became at least as strong as the voice of the principal character. Three frequently-recurring topical motifs occurred in the portraits: The first involved explanations for the principal character s success divided into three categories, agent, affect and ambition, the second concerned using journeys or trips as symbols for turning points in life, and the third referred to the ambiguity in the contradiction between private (family/other private life) and public (work) life. This ambiguity is connected to the portrait interview as a text type (genre) which features conclusions at the end of portraits, which in turn is characteristic of reportage. However, the analysis showed that the conclusions of the portrait interviews often also included elements of ambiguity. This was evident in the contradictions be14 tween private and public life that arose in the portrait interviews that focused on these two spheres. The portraits that focused on the principal character s public life showed ambiguity on a more general level concerning questions about being a woman and having a profession, and they often ended with a description of some details of her private life. The women in the portraits were all constructed as being successful, in terms of having achieved direct success, reflective success or success in the form of life wisdom. The women of direct success were described as ambitious individuals with no sidetracks on their life paths, while those of reflective success were described as active heroines who had received help from different agents, who could use their affects as enriching ingredients in life, but who in the end had control over their own lives (life stories). The elderly women were constructed as having achieved life wisdom and their portraits were focused upon the past. The portrait interview as a genre is characterised by journalistic freedom (in relation to the more strict news genre), by a now room (Swedish nurum ) where the journalist meets the principal character (usually via spoken dialogue that she or he transforms into written text to be read by a mass-media audience) and by the relatively closed structure of the portrait. The portrait is relatively independent in relation to the news genre and in relation to the context of what has previously been written, what is being written at the time and what will be written in the future the principal character does not need to belong to the newspaper s usual gallery of actors. Furthermore, the principal character is constructed as being independent in relation to the subsidiary characters and other media actors. The conflict is within the principal character herself and within her life story, unlike the news genre in which equal actors are in conflict with each other. The portrait is also independent in relation to the news lifespan; the publishing timetable is not as strict as in the news genre, but is still dependent on the factors initiating the portrait. The enclosures consist of a raw analysis of two of twelve portrait interviews and of copies of all portraits.

Thermal sresses in afinite solid cylinder due to steady temperature variation along the curved and end surface

An exact solution for determining the thermal stresses in a finite short cylinder due to an axisymmetric steady temperature field along the curved surface has been given. It is shown that a part of the solution obtained for this problem can be used to determine the thermal stresses in a finite solid cylinder heated over the end surfaces. Numerical results for a finite cylinder symmetrically heated over a portion on the curved surface and heated over the complete end surfaces have been given.

Thermal stresses in a finite hollow cylinder due to an axisymmetric temperature field at the end surface

A three-dimensional exact solution for determining the thermal stresses in a finite hollow cylinder subject to a steady state axisymmetric temperature field over one of its end surfaces has been given. Numerical results for a hollow cylinder, having lenght to outer diameter ratio equal to one and inner to outer diameter ratio equal to 0.75, subjected to a symmetric temperature variation over the end surfaces of the cylinder have been given.

Thermal stresses in a finite solid cylinder due to an axisymmetric temperature field at the end surface.

A three-dimensional rigorous solution for determining thermal stresses in a finite solid cylinder due to a steady state axisymmetric temperature field over one of its end surfaces is given. Numerical results for a solid cylinder having a length to diameter ratio equal to one and subjected to a symmetric temperature variation over half the radius of the cylinder at the end surfaces are included. These results have been compared with the results of the approximate solution given by W. Nowacki.

Polypyrimidine tract-binding protein interacts with coxsackievirus B3 RNA and influences its translation

We have investigated the possible role of trans-acting factors interacting with the untranslated regions (UTRs) of coxsackievirus B3 (CVB3) RNA. We show here that polypyrimidine tract-binding protein (PTB) binds specifically to both 5' and 3' UTRs, but with different affinity. We have demonstrated that PTB is a bona fide internal ribosome entry site (IRES) trans-acting factor (ITAF) for CVB3 RNA by characterizing the effect of partial silencing of FIB ex vivo in He La cells. Furthermore, IRES activity in BSC-1 cells, which are reported to have a very low level of endogenous FIB, was found to be significantly lower than that in He La cells. Additionally, we have mapped the putative contact points of PTB on the 5' and 3' UTRs by an RNA toe-printing assay. We have shown that the 3' UTR is able to stimulate CVB3 IRES-mediated translation. Interestingly, a deletion of 15 nt at the 5' end or 14 rut at the 3' end of the CVB3 3' UTR reduced the 3' UTR-mediated enhancement of IRES activity ex vivo significantly, and a reduced interaction was shown with PTB. It appears that the FIB protein might help in circularization of the CVB3 RNA by bridging the ends necessary for efficient translation of the viral RNA.

A model Integrating the Facilities Management Process with the Building End User’s Business Process (ProFacil)

The ProFacil model is a generic process model defined as a framework model showing the links between the facilities management process and the building end user’s business process. The purpose of using the model is to support more detailed process modelling. The model has been developed using the IDEF0 modelling method. The ProFacil model describes business activities from the generalized point of view as management-, support-, and core processes and their relations. The model defines basic activities in the provision of a facility. Examples of these activities are “operate facilities”, “provide new facilities”, “provide re-build facilities”, “provide maintained facilities” and “perform dispose of facilities”. These are all generic activities providing a basis for a further specialisation of company specific FM activities and their tasks. A facilitator can establish a specialized process model using the ProFacil model and interacting with company experts to describe their company’s specific processes. These modelling seminars or interviews will be done in an informal way, supported by the high-level process model as a common reference.

End-User Attitudes Towards EDM Use in Construction Project Work: Case Study

This article reports on a cross-sectional case study of a large construction project in which Electronic document management (EDM) was used. Attitudes towards EDM from the perspective of individual end users were investigated. Responses from a survey were combined with data from system usage log files to obtain an overview of attitudes prevalent in different user segments of the total population of 334 users. The survey was followed by semi-structured interviews with representative users. A strong majority of users from all segments of the project group considered EDM as a valuable aid in their work processes, despite certain functional limitations of the system used and the complexity of the information mass. Based on the study a model describing the key factors affecting end user EDM adoption is proposed. The model draws on insight from earlier studies of EDM enabled projects and theoretical frameworks on technology acceptance and success of information systems, as well as the insights gained from the case study.

Document page layout analysis using Harris corner points

Extraction of text areas from the document images with complex content and layout is one of the challenging tasks. Few texture based techniques have already been proposed for extraction of such text blocks. Most of such techniques are greedy for computation time and hence are far from being realizable for real time implementation. In this work, we propose a modification to two of the existing texture based techniques to reduce the computation. This is accomplished with Harris corner detectors. The efficiency of these two textures based algorithms, one based on Gabor filters and other on log-polar wavelet signature, are compared. A combination of Gabor feature based texture classification performed on a smaller set of Harris corner detected points is observed to deliver the accuracy and efficiency.

Acoustic emission technique for leak detection in an end shield of a pressurised heavy water reactor

This paper discusses a successful application of the Acoustic Emission Technique (AET) for the detection and location of leak paths present on an inaccessible side of an end shield of a Pressurised Heavy Water Reactor (PHWR). The methodology was based on the fact that air- and water-leak AE signals have different characteristic features. Baseline data was generated from a sound end shield of a PHWR for characterising the background noise. A mock-up end shield system with saw-cut leak paths was used to verify the validity of the methodology. It was found that air-leak signals under pressurisation (as low as 3 psi) could be detected by frequency domain analysis. Signals due to air leaks from various locations of defective end shield were acquired and analysed. It was possible to detect and locate leak paths. The presence of detected leak paths was further confirmed by an alternative test.