Weighted fairness with MCR guarantee and a general-purpose explicit rate allocation algorithm for ATM ABR service

In this paper, weighted fair rate allocation for ATM available bit rate (ABR) service is discussed with the concern of the minimum cell rate (MCR). Weighted fairness with MCR guarantee has been discussed recently in the literature. In those studies, each ABR virtual connection (VC) is first allocated its MCR, then the remaining available bandwidth is further shared among ABR VCs according to their weights. For the weighted fairness defined in this paper, the bandwidth is first allocated according to each VC's weight; if a VC's weighted share is less than its MCR, it should be allocated its MCR instead of the weighted share. This weighted fairness with MCR guarantee is referred to as extended weighted (EXW) fairness. Certain theoretical issues related to EXW, such as its global solution and bottleneck structure, are first discussed in the paper. A distributed explicit rate allocation algorithm is then proposed to achieve EXW fairness in ATM networks. The algorithm is a general-purpose explicit rate algorithm in the sense that it can realise almost all the fairness principles proposed for ABR so far whilst only minor modifications may be needed.

Fair flow control of ABR service by per-VC virtual queuing

In this paper, a rate-based flow control scheme based upon per-VC virtual queuing is proposed for the Available Bit Rate (ABR) service in ATM. In this scheme, each VC in a shared buffer is assigned a virtual queue, which is a counter. To achieve a specific kind of fairness, an appropriate scheduler is applied to the virtual queues. Each VC's bottleneck rate (fair share) is derived from its virtual cell departure rate. This approach of deriving a VC's fair share is simple and accurate. By controlling each VC with respect to its virtual queue and queue build-up in the shared buffer, network congestion is avoided. The principle of the control scheme is first illustrated by max–min flow control, which is realised by scheduling the virtual queues in round-robin. Further application of the control scheme is demonstrated with the achievement of weighted fairness through weighted round robin scheduling. Simulation results show that with a simple computation, the proposed scheme achieves the desired fairness exactly and controls network congestion effectively.

Embracing Philosophy and Raising the Standard of Pre-service Teacher Education Programs

In this chapter, a rationale is developed for incorporating philosophy into teacher training programs as a means of both preparing quality teachers for the 21st century and meeting the expectations detailed in the professional standards established by the statutory authority that regulates the profession in Queensland, the Queensland College of Teaching is presented. Furthermore, in-service teachers from Buranda State School, a Brisbane primary school that has been successfully teaching philosophy to its students for over 10 years, shares their experiences of teaching philosophy and how it has enhanced student learning and the quality of teaching and professionalism of the teachers. Finally, the implications of embedding philosophy into teacher training programs are explored in terms of developing the personal integrity of beginning teachers.

The Patches program : supporting the development of Malaysian pre-service teachers' academic literacy

The Patches program involves Malaysian pre-service teachers working closely with Australian pre-service teachers on a series of academic and intercultural communication tasks. A recurring problem for international students is the challenge to develop social relationships with Australian students. Similarly, it is often difficult for Australian students to step outside their accustomed social worlds to establish relationships with international students. The Patches Program supported rich cross-cultural social and academic exchanges among the students facilitating the development of students' academic literacy skills, their knowledge of self and knowledge of learning, and their skills in cross-cultural communication.

Modelling complex resource requirements in Business Process Management Systems

Real-world business processes are resource-intensive. In work environments human resources usually multitask, both human and non-human resources are typically shared between tasks, and multiple resources are sometimes necessary to undertake a single task. However, current Business Process Management Systems focus on task-resource allocation in terms of individual human resources only and lack support for a full spectrum of resource classes (e.g., human or non-human, application or non-application, individual or teamwork, schedulable or unschedulable) that could contribute to tasks within a business process. In this paper we develop a conceptual data model of resources that takes into account the various resource classes and their interactions. The resulting conceptual resource model is validated using a real-life healthcare scenario.

Wavelet based approaches and high resolution methods for complex process models

Many industrial processes and systems can be modelled mathematically by a set of Partial Differential Equations (PDEs). Finding a solution to such a PDF model is essential for system design, simulation, and process control purpose. However, major difficulties appear when solving PDEs with singularity. Traditional numerical methods, such as finite difference, finite element, and polynomial based orthogonal collocation, not only have limitations to fully capture the process dynamics but also demand enormous computation power due to the large number of elements or mesh points for accommodation of sharp variations. To tackle this challenging problem, wavelet based approaches and high resolution methods have been recently developed with successful applications to a fixedbed adsorption column model. Our investigation has shown that recent advances in wavelet based approaches and high resolution methods have the potential to be adopted for solving more complicated dynamic system models. This chapter will highlight the successful applications of these new methods in solving complex models of simulated-moving-bed (SMB) chromatographic processes. A SMB process is a distributed parameter system and can be mathematically described by a set of partial/ordinary differential equations and algebraic equations. These equations are highly coupled; experience wave propagations with steep front, and require significant numerical effort to solve. To demonstrate the numerical computing power of the wavelet based approaches and high resolution methods, a single column chromatographic process modelled by a Transport-Dispersive-Equilibrium linear model is investigated first. Numerical solutions from the upwind-1 finite difference, wavelet-collocation, and high resolution methods are evaluated by quantitative comparisons with the analytical solution for a range of Peclet numbers. After that, the advantages of the wavelet based approaches and high resolution methods are further demonstrated through applications to a dynamic SMB model for an enantiomers separation process. This research has revealed that for a PDE system with a low Peclet number, all existing numerical methods work well, but the upwind finite difference method consumes the most time for the same degree of accuracy of the numerical solution. The high resolution method provides an accurate numerical solution for a PDE system with a medium Peclet number. The wavelet collocation method is capable of catching up steep changes in the solution, and thus can be used for solving PDE models with high singularity. For the complex SMB system models under consideration, both the wavelet based approaches and high resolution methods are good candidates in terms of computation demand and prediction accuracy on the steep front. The high resolution methods have shown better stability in achieving steady state in the specific case studied in this Chapter.

An evaluation methodology for the tangible and intangible assets of city-regions : the 6K1C framework

Together with hard and soft networks tangible and intangible regional assets play an important role in the knowledge-based development of competing city-regions. The aim of this paper, therefore, is to investigate the best ways of managing invaluable tangible and intangible assets of city-regions. The paper explores the importance of asset management of city-regions by giving special emphasis on their knowledge asset base. This paper develops and introduces a theoretical framework to conceptualise a new approach to articulate the strategic planning mechanism, so called the 6K1C framework. The 6K1C framework is part of the strategic planning process of continuous improvement of overall public sector performance. The framework provides a proactive check-list approach integrated for managing and harnessing tangible and intangible assets of the post-industrial city-regions.

Evaluation on service quality of railway timetable

From the business viewpoint, the railway timetable is a list of the products presented by the railway transportation operators to the customers, specifying the schedules of all the train services on a railway line or network. In order to evaluate the quality of the train service schedules, a number of indices are proposed in this paper. These indices primarily take the passengers’ needs, such as waiting time, transfer time and transport capacity into consideration. Delay rate is usually used in post-evaluation. In this study, we propose to give an evaluation on the probability that the scheduled train services are likely to be delayed and the recovery ability of the timetable after delay has occurred. The evaluation identifies the possible problems in the services, such as excessive waiting time, non-seamless transfer, and high possibility of delay. This paper also discusses the improvement of these problems through certain adjustments on the timetable. The indices for evaluation and the adjustment method on timetable are then applied to a case study on the Hu-Ning-Hang railway in China, followed by the discussions of the merits of the proposed indices for timetable evaluation and possible improvement.

Centrally supported online surveys for research at QUT

We describe the introduction, service growth, benefits and holistic support approach of a centrally supported universitywide online survey tool for researchers at QUT. The online survey service employs the Key Survey software, and has grown into a significant service for QUT researchers since being introduced in 2009. Key benefits of the approach include the ability of QUT to handle important issues relating to data such as security, privacy, integrity, archiving & disposal. The service also incorporates a workflow process that enhances the institution’s ability to ensure survey quality control through controlled approval and pilot testing before any survey is widely released. An important issue is that a tool like this can make it very easy to do very poor research very quickly while creating lots of data, due to the absence of a rigorous methodology designed to reduce errors and collect accurate, comprehensive, timely data. With this in mind, a holistic approach to service provision and support has been taken, which has included the introduction of an integrated system of seminars, tools and workshops to get researchers thinking about the quality of their research while becoming operational quickly. The system of seminars, workshops, checks and approvals we have put in place at QUT is designed to ensure better quality outcomes for QUT’s research and the individual researchers concerned.

The impact of socialisation on graduates’ public service motivation : a mixed method study

There is a renaissance of interest in public service motivation in public management research. Moynnihan and Pandey (2007) assert that public service motivation (PSM) has significant practical relevance as it deals with the relationship between motivation and the public interest. There is a need to explore employee needs generated by public service motivation in order to attract and retain a high calibre cadre of public servants (Gabris & Simo, 1995). Such exploration is particularly important beyond the American context which has dominated the literature to date (Taylor, 2007; Vandenabeele, Scheepers, & Hondeghem, 2006; Vandenabeele & Van de Walle, 2008).

Nonprofit organizational and work unit identification and the occupational stress process

Research investigating the transactional approach to the work stressor-employee adjustment relationship has described many negative main effects between perceived stressors in the workplace and employee outcomes. A considerable amount of literature, theoretical and empirical, also describes potential moderators of this relationship. Organizational identification has been established as a significant predictor of employee job-related attitudes. To date, research has neglected investigation of the potential moderating effect of organizational identification in the work stressor-employee adjustment relationship. On the basis of identity, subjective fit and sense of belonging literature it was predicted that higher perceptions of identification at multiple levels of the organization would mitigate the negative effect of work stressors on employee adjustment. It was expected, further, that more proximal, lower order identifications would be more prevalent and potent as buffers of stressors on strain. Predictions were tested with an employee sample from five organizations (N = 267). Hierarchical moderated multiple regression analyses revealed some support for the stress-buffering effects of identification in the prediction of job satisfaction and organizational commitment, particularly for more proximal (i.e., work unit) identification. These positive stress-buffering effects, however, were present for low identifiers in some situations. The present study represents an extension of the application of organizational identity theory by identifying the effects of organizational and workgroup identification on employee outcomes in the nonprofit context. Our findings will contribute to a better understanding of the dynamics in nonprofit organizations and therefore contribute to the development of strategy and interventions to deal with identity-based issues in nonprofits.

Cultural influences on IS service quality perceptions

While Information services function’s (ISF) service quality is not a new concept and has received considerable attention for over two decades, cross-cultural research of ISF’s service quality is not very mature. The author argues that the relationship between cultural dimensions and the ISF’s service quality dimensions may provide useful insights for how organisations should deal with different cultural groups. This paper will show that ISF’s service quality dimensions vary from one culture to another. The study adopts Hofstede’s (1980, 1991) typology of cultures and the “zones of tolerance” (ZOT) service quality measure reported by Kettinger & Lee (2005) as the primary commencing theory-base. In this paper, the author hypothesised and tested the influences of culture on users’ service quality perceptions and found strong empirical support for the study’s hypotheses. The results of this study indicate that as a result of their cultural characteristics, users vary in both their overall service quality perceptions and their perceptions on each of the four dimensions of ZOT service quality.

Clone Detection in Repositories of Business Process Models

Business process model repositories capture precious knowledge about an organization or a business domain. In many cases, these repositories contain hundreds or even thousands of models and they represent several man-years of effort. Over time, process model repositories tend to accumulate duplicate fragments, as new process models are created by copying and merging fragments from other models. This calls for methods to detect duplicate fragments in process models that can be refactored as separate subprocesses in order to increase readability and maintainability. This paper presents an indexing structure to support the fast detection of clones in large process model repositories. Experiments show that the algorithm scales to repositories with hundreds of models. The experimental results also show that a significant number of non-trivial clones can be found in process model repositories taken from industrial practice.

Co-creation in business service lifecycle management

Co-creation between customers and providers has recently gained more attention by business service providers as a promising endeavour. The different perspectives of co-creation - innovation, sourcing and marketing - are well deployed. From a provider’s point of view, the question of how to manage business services with respect to co-creation is vitally important. However, service engineering and service lifecycle management typically take a mostly internal, closed-loop approach, although a logical implication of acknowledging the value co-creation perspective on “service” would be to leverage customer and other stakeholder competences to the full extent. This paper aims at reconciling the perspectives of co-creation and makes a contribution by analysing where and how co-creation can be effectively utilised throughout the various stages of a generic business service lifecycle. The result will be a framework guiding companies in using co-creation when managing their business services.

Online service delivery models : an international comparison in the public sector

Governments around the world are facing the challenge of responding to increased expectations by their customers with regard to public service delivery. Citizens, for example, expect governments to provide better and more efficient electronic services on the Web in an integrated way. Online portals have become the approach of choice in online service delivery to meet these requirements and become more customer-focussed. This study describes and analyses existing variants of online service delivery models based upon an empirical study and provides valuable insights for researchers and practitioners in government. For this study, we have conducted interviews with senior management representatives from five international governments. Based on our findings, we distinguish three different classes of service delivery models. We describe and characterise each of these models in detail and provide an in-depth discussion of the strengths and weaknesses of these approaches.