BioMet®Tools: from modeling and simulation to product design and development

BioMet®Tools is a set of software applications developed for the biometrical characterization of voice in different fields as voice quality evaluation in laryngology, speech therapy and rehabilitation, education of the singing voice, forensic voice analysis in court, emotional detection in voice, secure access to facilities and services, etc. Initially it was conceived as plain research code to estimate the glottal source from voice and obtain the biomechanical parameters of the vocal folds from the spectral density of the estimate. This code grew to what is now the Glottex®Engine package (G®E). Further demands from users in medical and forensic fields instantiated the development of different Graphic User Interfaces (GUI’s) to encapsulate user interaction with the G®E. This required the personalized design of different GUI’s handling the same G®E. In this way development costs and time could be saved. The development model is described in detail leading to commercial production and distribution. Study cases from its application to the field of laryngology and speech therapy are given and discussed.

Runtime variability for dynamic reconfiguration in wireless sensor network product lines

Runtime variability is a key technique for the success of Dynamic Software Product Lines (DSPLs), as certain application demand reconfiguration of system features and execution plans at runtime. In this emerging research work we address the problem of dynamic changes in feature models in sensor networks product families, where nodes of the network demand dynamic reconfiguration at post-deployment time.

Configuration management and product lines to enhance the replication process in software engineering

This research is concerned with the experimental software engineering area, specifically experiment replication. Replication has traditionally been viewed as a complex task in software engineering. This is possibly due to the present immaturity of the experimental paradigm applied to software development. Researchers usually use replication packages to replicate an experiment. However, replication packages are not the solution to all the information management problems that crop up when successive replications of an experiment accumulate. This research borrows ideas from the software configuration management and software product line paradigms to support the replication process. We believe that configuration management can help to manage and administer information from one replication to another: hypotheses, designs, data analysis, etc. The software product line paradigm can help to organize and manage any changes introduced into the experiment by each replication. We expect the union of the two paradigms in replication to improve the planning, design and execution of further replications and their alignment with existing replications. Additionally, this research work will contribute a web support environment for archiving information related to different experiment replications. Additionally, it will provide flexible enough information management support for running replications with different numbers and types of changes. Finally, it will afford massive storage of data from different replications. Experimenters working collaboratively on the same experiment must all have access to the different experiments.

Using configuration management and product line software paradigms to support the experimentation process in software engineering.

There is no empirical evidence whatsoever to support most of the beliefs on which software construction is based. We do not yet know the adequacy, limits, qualities, costs and risks of the technologies used to develop software. Experimentation helps to check and convert beliefs and opinions into facts. This research is concerned with the replication area. Replication is a key component for gathering empirical evidence on software development that can be used in industry to build better software more efficiently. Replication has not been an easy thing to do in software engineering (SE) because the experimental paradigm applied to software development is still immature. Nowadays, a replication is executed mostly using a traditional replication package. But traditional replication packages do not appear, for some reason, to have been as effective as expected for transferring information among researchers in SE experimentation. The trouble spot appears to be the replication setup, caused by version management problems with materials, instruments, documents, etc. This has proved to be an obstacle to obtaining enough details about the experiment to be able to reproduce it as exactly as possible. We address the problem of information exchange among experimenters by developing a schema to characterize replications. We will adapt configuration management and product line ideas to support the experimentation process. This will enable researchers to make systematic decisions based on explicit knowledge rather than assumptions about replications. This research will output a replication support web environment. This environment will not only archive but also manage experimental materials flexibly enough to allow both similar and differentiated replications with massive experimental data storage. The platform should be accessible to several research groups working together on the same families of experiments.

The facility manager architect : the social responsability as an added value.

From the very first steps to execute a building, it is essential to analyze its life cycle. Similarly, we should consider the life cycle when projecting an urban intervention. Professionals of the Facility Management take part in construction projects, developing and managing DBFMO projects (Design, Build, Finance, Maintenance & Operate). Whatever the nature of the promoter is – private or public – promoters are leaders in projects of responsible management of spaces, whether these are work spaces, leisure spaces or residential spaces. They know and identify with the company and its performance, its values and its needs. These professionals give sustainable solutions in the life cycle of buildings (offices and housing), new ways to work and initiatives of innovations linked to current social changes: technology, social networks, and new habits. Concepts where innovation is essential should consider responsible values. Social, economic and sustainable aspects have to associate with the management performed by a Facilities Manager when considering the three groups of stakeholders with which it is linked: economic (shareholders), contractual (users), non-contractual (neighborhoods, organizations, etc.). Marcus Vitruvius Pollio, at the beginning of his book "The Ten Books on Architecture" describes and argues how the distribution in buildings must always adapt to their inhabitants. Let us build cities and buildings with responsible criteria, bearing in mind all its users and the needs of each one of them. Not to mention the need to adapt to future requirements with minimum cost and maximum profitability. These needs, under responsible management, are competencies developed by a Facilities Manager in his day to day. He cares and takes over the entire life cycle of buildings and their surroundings. This work is part of the PhD project whose main aim is to study the added value to the architectural profession when social responsibility criteria are applied in his/her role as Facility Manager.

La responsabilidad social como valor añadido del facilities manager en la gestión del patrimonio inmobiliario

Resulta difícil definir una profesión que surge por la necesidad de adaptar los espacios de trabajo a las nuevas tendencias de las organizaciones, a la productividad, a las nuevas tecnologías que continúan modificando y facilitando desde las últimas décadas el modo y forma de trabajar. Mucho más complicado resulta definir una profesión casi invisible. Cuando todo funciona en un edificio, en un inmueble, en un activo. Todo está correcto. He ahí la dificultad de su definición. Lo que no se ve, no se valora. Las reuniones, las visitas, un puesto de trabajo, una sala de trabajo, una zona de descanso. La climatización, la protección contra incendios, la legionela, el suministro eléctrico, una evacuación. La organización, sus necesidades, su filosofía. Los informes, los análisis, las mejoras. Las personas, el espacio, los procesos, la tecnología. En la actualidad, todo se asocia a su coste. A su rentabilidad. En la difícil tarea de realizar el proyecto de un edificio, participan multitud de aspectos que deben estar perfectamente organizados. El arquitecto proyecta y aúna en el proyecto: pasado (experiencia), presente (tendencias) y futuro (perdurabilidad). Y es en ese momento, cuando al considerar el futuro del edificio, su perdurabilidad, hace que su ciclo de vida sea criterio fundamental al proyectar. Que deba considerarse desde el primer esbozo del proyecto. Para que un edificio perdure en el tiempo existen gran número de factores condicionantes. Empezando por su uso apropiado, su nivel de actividad, pasando por las distintas propiedades que pueda tener, y terminando por los responsables de su mantenimiento en su día a día. Esa profesión invisible, es la disciplina conocida como Facility Management. Otra disciplina no tan novedosa –sus inicios fueron a finales del siglo XIX-, y que en la actualidad se empieza a valorar en gran medida es la Responsabilidad Social. Todo lo que de forma voluntaria, una organización realiza por encima de lo estrictamente legal con objeto de contribuir al desarrollo sostenible (económico, social y medio ambiental). Ambas disciplinas destacan por su continuo dinamismo. Reflejando la evolución de distintas inquietudes: • Personas, procesos, espacios, tecnología • Económica, social, medio-ambiental Y que sólo puede gestionarse con una correcta gestión del cambio. Elemento bisagra entre ambas disciplinas. El presente trabajo de investigación se ha basado en el estudio del grado de sensibilización que existe para con la Responsabilidad Social dentro del sector de la Facility Management en España. Para ello, se han estructurado varios ejercicios con objeto de analizar: la comunicación, el marco actual normativo, la opinión del profesional, del facilities manager. Como objetivo, conocer la implicación actual que la Responsabilidad Social ejerce en el ejercicio de la profesión del Facilities Manager. Se hace especial hincapié en la voluntariedad de ambas disciplinas. De ahí que el presente estudio de investigación realice dicho trabajo sobre elementos voluntarios y por tanto sobre el valor añadido que se obtiene al gestionar dichas disciplinas de forma conjunta y voluntaria. Para que una organización pueda desarrollar su actividad principal –su negocio-, el Facilities Manager gestiona el segundo coste que esta organización tiene. Llegando a poder ser el primero si se incluye el coste asociado al personal (nóminas, beneficios, etc.) Entre el (70 – 80)% del coste de un edificio a lo largo de toda su vida útil, se encuentra en su periodo de explotación. En la perdurabilidad. La tecnología facilita la gestión, pero quien gestiona y lleva a cabo esta perdurabilidad son las personas en los distintos niveles de gestión: estratégico, táctico y operacional. En estos momentos de constante competencia, donde la innovación es el uniforme de batalla, el valor añadido del Facilities Manager se construye gestionando el patrimonio inmobiliario con criterios responsables. Su hecho diferenciador: su marca, su reputación. ABSTRACT It comes difficult to define a profession that emerges due to the need of adapting working spaces to new organization’s trends, productivity improvements and new technologies, which have kept changing and making easier the way that we work during the last decades. Defining an invisible profession results much more complicated than that, because everything is fine when everything works in a building, or in an asset, properly. Hence, there is the difficulty of its definition. What it is not seen, it is not worth. Meeting rooms, reception spaces, work spaces, recreational rooms. HVAC, fire protection, power supply, legionnaire’s disease, evacuation. The organization itself, its needs and its philosophy. Reporting, analysis, improvements. People, spaces, process, technology. Today everything is associated to cost and profitability. In the hard task of developing a building project, a lot of issues, that participate, must be perfectly organized. Architects design and gather/put together in the project: the past (experience), the present (trends) and the future (durability). In that moment, considering the future of the building, e. g. its perdurability, Life Cycle turn as the key point of the design. This issue makes LCC a good idea to have into account since the very first draft of the project. A great number of conditioner factors exist in order to the building resist through time. Starting from a suitable use and the level of activity, passing through different characteristics it may have, and ending daily maintenance responsible. That invisible profession, that discipline, is known as Facility Management. Another discipline, not as new as FM –it begun at the end of XIX century- that is becoming more and more valuable is Social Responsibility. It involves everything a company realizes in a voluntary way, above legal regulations contributing sustainable development (financial, social and environmentally). Both disciplines stand out by their continuous dynamism. Reflecting the evolution of different concerning: • People, process, spaces, technology • Financial, social and environmentally It can only be managed from the right change management. This is the linking point between both disciplines. This research work is based on the study of existing level of increasing sensitivity about Social Responsibility within Facility Management’s sector in Spain. In order to do that, several –five- exercises have been studied with the purpose of analyze: communication, law, professional and facility manager’s opinions. The objective is to know the current implication that Social Responsibility has over Facility Management. It is very important the voluntary part of both disciplines, that’s why the present research work is focused over the voluntary elements and about the added value that is obtained managing the before named disciplines as a whole and in voluntary way. In order a company can develop his core business/primary activities, facility managers must operate the second largest company budget/cost centre. Being the first centre cost if we considerer human resources’ costs included (salaries, incentives…) Among 70-80% building costs are produced along its operative life. Durability Technology ease management, but people are who manage and carry out this durability, within different levels: strategic, tactic and operational. In a world of continuing competence, where innovation is the uniform for the battle, facility manager’s added value is provided managing company’s real estate with responsibility criteria. Their distinguishing element: their brand, their reputation.

Model-to-Code transformation from product-line architecture models to aspectJ

Software Product Line Engineering has significant advantages in family-based software development. The common and variable structure for all products of a family is defined through a Product-Line Architecture (PLA) that consists of a common set of reusable components and connectors which can be configured to build the different products. The design of PLA requires solutions for capturing such configuration (variability). The Flexible-PLA Model is a solution that supports the specification of external variability of the PLA configuration, as well as internal variability of components. However, a complete support for product-line development requires translating architecture specifications into code. This complex task needs automation to avoid human error. Since Model-Driven Development allows automatic code generation from models, this paper presents a solution to automatically generate AspectJ code from Flexible-PLA models previously configured to derive specific products. This solution is supported by a modeling framework and validated in a software factory.

FPLA: a modeling framework for describing flexible software product line architecture

Nowadays, Software Product Line (SPL) engineering [1] has been widely-adopted in software development due to the significant improvements that has provided, such as reducing cost and time-to-market and providing flexibility to respond to planned changes [2]. SPL takes advantage of common features among the products of a family through the systematic reuse of the core-assets and the effective management of variabilities across the products. SPL features are realized at the architectural level in product-line architecture (PLA) models. Therefore, suitable modeling and specification techniques are required to model variability. In fact, architectural variability modeling has become a challenge for SPLE due to the fact that PLA modeling requires not only modeling variability at the level of the external architecture configuration (see [3,4] literature reviews), but also at the level of internal specification of components [5]. In addition, PLA modeling requires preserving the traceability between features and PLAs. Finally, it is important to take into account that PLA modeling should guide architects in modeling the PLA core assets and variability, and in deriving the customized products. To deal with these needs, we present in this demonstration the FPLA Modeling Framework.

Providing a consensus definition for the term "Smart Product"

The term "Smart Product" has become commonly used in recent years. This is because there has been an increasing interest in these kinds of products as part of the consumer goods industry, impacting everyday life and industry. Nevertheless, the term "Smart Product" is used with different meanings in different contexts and application domains. The use of the term "Smart Product" with different meanings and underlying semantics can create important misunderstandings and dissent. The aim of this paper is to analyze the different definitions of Smart Product available in the literature, and to explore and analyze their commonalities and differences, in order to provide a consensus definition that satisfies, and can therefore be used by, all parties. To embrace the identified definitions, the concept of "Smart Thing" is introduced. The methodology used was a systematic literature review. The definition is expressed as an ontology.

Agile Product Inception: Framework Analysis and Support

In this dissertation, after testing that neither the definition of Agile methodologies, nor the current tools that support them, such as Scrum or XP, gave guidance for stages of software development prior to the definition of the first interaction of development; we proceeded to study the state of the art of Inception techniques, that is, techniques to deal with this early phase of the project, that would help guide its development. From the analysis of these Inception techniques, we defined what we considered as the essential properties of an Inception framework. With that list at hand, it was found that no current Inception framework supported all the features, also, we found that it did not exist, either, any software application on the market that did it. Finally, after checking the above gaps, we defined the Inception framework "Agile Incepti-ON", with all the practices necessary to meet the requirements specified above. In addition to this, a software application was developed to support the practices defined in the Inception framework, called "Agile Dojo".

The usefulness of Usability and User Experience evaluation methods on an e-Learning platform development from a developer's perspective: A case study

The development of a web platform is a complex and interdisciplinary task, where people with different roles such as project manager, designer or developer participate. Different usability and User Experience evaluation methods can be used in each stage of the development life cycle, but not all of them have the same influence in the software development and in the final product or system. This article presents the study of the impact of these methods applied in the context of an e-Learning platform development. The results show that the impact has been strong from a developer's perspective. Developer team members considered that usability and User Experience evaluation allowed them mainly to identify design mistakes, improve the platform's usability and understand the end users and their needs in a better way. Interviews with potential users, clickmaps and scrollmaps were rated as the most useful methods. Finally, these methods were considered unanimously very useful in the context of the entire software development, only comparable to SCRUM meetings and overcoming the rest of involved factors.

A proposal for a modular and application-aware autonomic manager of private cloud infrastructures

Recientemente, el paradigma de la computación en la nube ha recibido mucho interés por parte tanto de la industria como del mundo académico. Las infraestructuras cloud públicas están posibilitando nuevos modelos de negocio y ayudando a reducir costes. Sin embargo, una compañía podría desear ubicar sus datos y servicios en sus propias instalaciones, o tener que atenerse a leyes de protección de datos. Estas circunstancias hacen a las infraestructuras cloud privadas ciertamente deseables, ya sea para complementar a las públicas o para sustituirlas por completo. Por desgracia, las carencias en materia de estándares han impedido que las soluciones para la gestión de infraestructuras privadas se hayan desarrollado adecuadamente. Además, la multitud de opciones disponibles ha creado en los clientes el miedo a depender de una tecnología concreta (technology lock-in). Una de las causas de este problema es la falta de alineación entre la investigación académica y los productos comerciales, ya que aquella está centrada en el estudio de escenarios idealizados sin correspondencia con el mundo real, mientras que éstos consisten en soluciones desarrolladas sin tener en cuenta cómo van a encajar con los estándares más comunes o sin preocuparse de hacer públicos sus resultados. Con objeto de resolver este problema, propongo un sistema de gestión modular para infraestructuras cloud privadas enfocado en tratar con las aplicaciones en lugar de centrarse únicamente en los recursos hardware. Este sistema de gestión sigue el paradigma de la computación autónoma y está diseñado en torno a un modelo de información sencillo, desarrollado para ser compatible con los estándares más comunes. Este modelo divide el entorno en dos vistas, que sirven para separar aquello que debe preocupar a cada actor involucrado del resto de información, pero al mismo tiempo permitiendo relacionar el entorno físico con las máquinas virtuales que se despliegan encima de él. En dicho modelo, las aplicaciones cloud están divididas en tres tipos genéricos (Servicios, Trabajos de Big Data y Reservas de Instancias), para que así el sistema de gestión pueda sacar partido de las características propias de cada tipo. El modelo de información está complementado por un conjunto de acciones de gestión atómicas, reversibles e independientes, que determinan las operaciones que se pueden llevar a cabo sobre el entorno y que es usado para hacer posible la escalabilidad en el entorno. También describo un motor de gestión encargado de, a partir del estado del entorno y usando el ya mencionado conjunto de acciones, la colocación de recursos. Está dividido en dos niveles: la capa de Gestores de Aplicación, encargada de tratar sólo con las aplicaciones; y la capa del Gestor de Infraestructura, responsable de los recursos físicos. Dicho motor de gestión obedece un ciclo de vida con dos fases, para así modelar mejor el comportamiento de una infraestructura real. El problema de la colocación de recursos es atacado durante una de las fases (la de consolidación) por un resolutor de programación entera, y durante la otra (la online) por un heurístico hecho ex-profeso. Varias pruebas han demostrado que este acercamiento combinado es superior a otras estrategias. Para terminar, el sistema de gestión está acoplado a arquitecturas de monitorización y de actuadores. Aquella estando encargada de recolectar información del entorno, y ésta siendo modular en su diseño y capaz de conectarse con varias tecnologías y ofrecer varios modos de acceso. ABSTRACT The cloud computing paradigm has raised in popularity within the industry and the academia. Public cloud infrastructures are enabling new business models and helping to reduce costs. However, the desire to host company’s data and services on premises, and the need to abide to data protection laws, make private cloud infrastructures desirable, either to complement or even fully substitute public oferings. Unfortunately, a lack of standardization has precluded private infrastructure management solutions to be developed to a certain level, and a myriad of diferent options have induced the fear of lock-in in customers. One of the causes of this problem is the misalignment between academic research and industry ofering, with the former focusing in studying idealized scenarios dissimilar from real-world situations, and the latter developing solutions without taking care about how they f t with common standards, or even not disseminating their results. With the aim to solve this problem I propose a modular management system for private cloud infrastructures that is focused on the applications instead of just the hardware resources. This management system follows the autonomic system paradigm, and is designed around a simple information model developed to be compatible with common standards. This model splits the environment in two views that serve to separate the concerns of the stakeholders while at the same time enabling the traceability between the physical environment and the virtual machines deployed onto it. In it, cloud applications are classifed in three broad types (Services, Big Data Jobs and Instance Reservations), in order for the management system to take advantage of each type’s features. The information model is paired with a set of atomic, reversible and independent management actions which determine the operations that can be performed over the environment and is used to realize the cloud environment’s scalability. From the environment’s state and using the aforementioned set of actions, I also describe a management engine tasked with the resource placement. It is divided in two tiers: the Application Managers layer, concerned just with applications; and the Infrastructure Manager layer, responsible of the actual physical resources. This management engine follows a lifecycle with two phases, to better model the behavior of a real infrastructure. The placement problem is tackled during one phase (consolidation) by using an integer programming solver, and during the other (online) with a custom heuristic. Tests have demonstrated that this combined approach is superior to other strategies. Finally, the management system is paired with monitoring and actuators architectures. The former able to collect the necessary information from the environment, and the later modular in design and capable of interfacing with several technologies and ofering several access interfaces.

Integración del software de los subsistemas manager, plataforma y determinación y control de actitud para satélite UPMSat-2

El proyecto UPMSat2 aborda el desarrollo de un micro-satélite que se usará como una plataforma de demostración tecnológica. La mayor parte del proyecto se desarrolla en el Instituto Ignacio de la Riva de la Universidad Politécnica de Madrid, con la colaboración de empresas del sector del espacio. La labor del grupo STRAST se centra en el desarrollo del software de vuelo y del sector de tierra del satélite. Este Trabajo Fin de Grado trata del desarrollo de algunos componentes del software embarcado en el satélite. Los componentes desarrollados son: Manager, Platform y ADCS. El Manager está encargado de dirigir el funcionamiento del satélite y, en concreto, de su modo de operación. El Platform se encarga de monitorizar el estado del satélite, para comprobar que el funcionamiento de los componentes de hardware es el adecuado. Finalmente, el ADCS (Attitude Determination and Control System) trata de asegurar que la posición del satélite, respecto a la tierra, es la adecuada. El desarrollo de este trabajo parte de un diseño existente, creado por alumnos previamente. El trabajo realizado ha consistido en mejorarlos con funcionalidad adicional y realizar una integración de estos subsistemas. El resultado es un sistema operativo, que incluye unas pruebas preliminares. Un trabajo futuro será la realización de pruebas exhaustivas,para validar el funcionamiento de los subsistemas desarrollados. El desarrollo de software se ha basado en un conjunto de tecnologías habituales en los sistemas empotrados de alta integridad. El diseño se ha realizado con la herramienta TASTE, que permite el uso de AADL. El lenguaje Ada se ha utilizado para la implementación, ya que es adecuado para este tipo de sistemas. En concreto, se ha empleado un subconjunto seguro del lenguaje para poder realizar análisis estático y para incrementar la predecibilidad de su comportamiento. La concurrencia se basa en el modelo de Ravenscar,que es conforme con los métodos de análisis de respuesta.

Utilizing the Internet of Things to promote energy awareness and efficiency at discrete production processes: Practices and methodology

El actual contexto de fabricación, con incrementos en los precios de la energía, una creciente preocupación medioambiental y cambios continuos en los comportamientos de los consumidores, fomenta que los responsables prioricen la fabricación respetuosa con el medioambiente. El paradigma del Internet de las Cosas (IoT) promete incrementar la visibilidad y la atención prestada al consumo de energía gracias tanto a sensores como a medidores inteligentes en los niveles de máquina y de línea de producción. En consecuencia es posible y sencillo obtener datos de consumo de energía en tiempo real proveniente de los procesos de fabricación, pero además es posible analizarlos para incrementar su importancia en la toma de decisiones. Esta tesis pretende investigar cómo utilizar la adopción del Internet de las Cosas en el nivel de planta de producción, en procesos discretos, para incrementar la capacidad de uso de la información proveniente tanto de la energía como de la eficiencia energética. Para alcanzar este objetivo general, la investigación se ha dividido en cuatro sub-objetivos y la misma se ha desarrollado a lo largo de cuatro fases principales (en adelante estudios). El primer estudio de esta tesis, que se apoya sobre una revisión bibliográfica comprehensiva y sobre las aportaciones de expertos, define prácticas de gestión de la producción que son energéticamente eficientes y que se apoyan de un modo preeminente en la tecnología IoT. Este primer estudio también detalla los beneficios esperables al adoptar estas prácticas de gestión. Además, propugna un marco de referencia para permitir la integración de los datos que sobre el consumo energético se obtienen en el marco de las plataformas y sistemas de información de la compañía. Esto se lleva a cabo con el objetivo último de remarcar cómo estos datos pueden ser utilizados para apalancar decisiones en los niveles de procesos tanto tácticos como operativos. Segundo, considerando los precios de la energía como variables en el mercado intradiario y la disponibilidad de información detallada sobre el estado de las máquinas desde el punto de vista de consumo energético, el segundo estudio propone un modelo matemático para minimizar los costes del consumo de energía para la programación de asignaciones de una única máquina que deba atender a varios procesos de producción. Este modelo permite la toma de decisiones en el nivel de máquina para determinar los instantes de lanzamiento de cada trabajo de producción, los tiempos muertos, cuándo la máquina debe ser puesta en un estado de apagada, el momento adecuado para rearrancar, y para pararse, etc. Así, este modelo habilita al responsable de producción de implementar el esquema de producción menos costoso para cada turno de producción. En el tercer estudio esta investigación proporciona una metodología para ayudar a los responsables a implementar IoT en el nivel de los sistemas productivos. Se incluye un análisis del estado en que se encuentran los sistemas de gestión de energía y de producción en la factoría, así como también se proporcionan recomendaciones sobre procedimientos para implementar IoT para capturar y analizar los datos de consumo. Esta metodología ha sido validada en un estudio piloto, donde algunos indicadores clave de rendimiento (KPIs) han sido empleados para determinar la eficiencia energética. En el cuarto estudio el objetivo es introducir una vía para obtener visibilidad y relevancia a diferentes niveles de la energía consumida en los procesos de producción. El método propuesto permite que las factorías con procesos de producción discretos puedan determinar la energía consumida, el CO2 emitido o el coste de la energía consumida ya sea en cualquiera de los niveles: operación, producto o la orden de fabricación completa, siempre considerando las diferentes fuentes de energía y las fluctuaciones en los precios de la misma. Los resultados muestran que decisiones y prácticas de gestión para conseguir sistemas de producción energéticamente eficientes son posibles en virtud del Internet de las Cosas. También, con los resultados de esta tesis los responsables de la gestión energética en las compañías pueden plantearse una aproximación a la utilización del IoT desde un punto de vista de la obtención de beneficios, abordando aquellas prácticas de gestión energética que se encuentran más próximas al nivel de madurez de la factoría, a sus objetivos, al tipo de producción que desarrolla, etc. Así mismo esta tesis muestra que es posible obtener reducciones significativas de coste simplemente evitando los períodos de pico diario en el precio de la misma. Además la tesis permite identificar cómo el nivel de monitorización del consumo energético (es decir al nivel de máquina), el intervalo temporal, y el nivel del análisis de los datos son factores determinantes a la hora de localizar oportunidades para mejorar la eficiencia energética. Adicionalmente, la integración de datos de consumo energético en tiempo real con datos de producción (cuando existen altos niveles de estandarización en los procesos productivos y sus datos) es esencial para permitir que las factorías detallen la energía efectivamente consumida, su coste y CO2 emitido durante la producción de un producto o componente. Esto permite obtener una valiosa información a los gestores en el nivel decisor de la factoría así como a los consumidores y reguladores. ABSTRACT In today‘s manufacturing scenario, rising energy prices, increasing ecological awareness, and changing consumer behaviors are driving decision makers to prioritize green manufacturing. The Internet of Things (IoT) paradigm promises to increase the visibility and awareness of energy consumption, thanks to smart sensors and smart meters at the machine and production line level. Consequently, real-time energy consumption data from the manufacturing processes can be easily collected and then analyzed, to improve energy-aware decision-making. This thesis aims to investigate how to utilize the adoption of the Internet of Things at shop floor level to increase energy–awareness and the energy efficiency of discrete production processes. In order to achieve the main research goal, the research is divided into four sub-objectives, and is accomplished during four main phases (i.e., studies). In the first study, by relying on a comprehensive literature review and on experts‘ insights, the thesis defines energy-efficient production management practices that are enhanced and enabled by IoT technology. The first study also explains the benefits that can be obtained by adopting such management practices. Furthermore, it presents a framework to support the integration of gathered energy data into a company‘s information technology tools and platforms, which is done with the ultimate goal of highlighting how operational and tactical decision-making processes could leverage such data in order to improve energy efficiency. Considering the variable energy prices in one day, along with the availability of detailed machine status energy data, the second study proposes a mathematical model to minimize energy consumption costs for single machine production scheduling during production processes. This model works by making decisions at the machine level to determine the launch times for job processing, idle time, when the machine must be shut down, ―turning on‖ time, and ―turning off‖ time. This model enables the operations manager to implement the least expensive production schedule during a production shift. In the third study, the research provides a methodology to help managers implement the IoT at the production system level; it includes an analysis of current energy management and production systems at the factory, and recommends procedures for implementing the IoT to collect and analyze energy data. The methodology has been validated by a pilot study, where energy KPIs have been used to evaluate energy efficiency. In the fourth study, the goal is to introduce a way to achieve multi-level awareness of the energy consumed during production processes. The proposed method enables discrete factories to specify energy consumption, CO2 emissions, and the cost of the energy consumed at operation, production and order levels, while considering energy sources and fluctuations in energy prices. The results show that energy-efficient production management practices and decisions can be enhanced and enabled by the IoT. With the outcomes of the thesis, energy managers can approach the IoT adoption in a benefit-driven way, by addressing energy management practices that are close to the maturity level of the factory, target, production type, etc. The thesis also shows that significant reductions in energy costs can be achieved by avoiding high-energy price periods in a day. Furthermore, the thesis determines the level of monitoring energy consumption (i.e., machine level), the interval time, and the level of energy data analysis, which are all important factors involved in finding opportunities to improve energy efficiency. Eventually, integrating real-time energy data with production data (when there are high levels of production process standardization data) is essential to enable factories to specify the amount and cost of energy consumed, as well as the CO2 emitted while producing a product, providing valuable information to decision makers at the factory level as well as to consumers and regulators.

GPS-PYMEs: Marco de Gestión de Proyectos para el desarrollo Seguro en PYMEs

En la actualidad no se concibe una empresa, por pequeña que esta sea, sin algún tipo de servicio TI. Se presenta para cada empresa el reto de emprender proyectos para desarrollar o contratar servicios de TI que soporten los diferentes procesos de negocio de la empresa. Por otro lado, a menos que los servicios de TI estén aislados de toda red, lo cual es prácticamente imposible en la actualidad, no existe un servicio o un proyecto que lo desarrolle garantizando el 100% de seguridad. Así la empresa maneja una dualidad entre desarrollar productos/servicios de TI seguros y el mantenimiento constante de sus servicios TI en estado seguro. La gestión de los proyectos para el desarrollo de los servicios de TI se aborda, en la mayoría de las empresas, aplicando distintas prácticas, utilizadas en otros proyectos y recomendadas, a tal efecto, por marcos y estándares con mayor reconocimiento. Por lo general, estos marcos incluyen, entre sus procesos, la gestión de los riesgos orientada al cumplimiento de plazos, de costes y, a veces, de la funcionalidad del producto o servicio. Sin embargo, en estas prácticas se obvian los aspectos de seguridad (confidencialidad, integridad y disponibilidad) del producto/servicio, necesarios durante el desarrollo del proyecto. Además, una vez entregado el servicio, a nivel operativo, cuando surge algún fallo relativo a estos aspectos de seguridad, se aplican soluciones ad-hoc. Esto provoca grandes pérdidas y, en ocasiones, pone en peligro la continuidad de la propia empresa. Este problema, se va acrecentando cada día más, en cualquier tipo de empresa y, son las PYMEs, por su la falta de conocimiento del problema en sí y la escasez de recursos metodológicos y técnicos, las empresas más vulnerables. Por todo lo anterior, esta tesis doctoral tiene un doble objetivo. En primer lugar, demostrar la necesidad de contar con un marco de trabajo que, integrado con otros posibles marcos y estándares, sea sencillo de aplicar en distintos tipos y envergaduras de proyectos, y que guíe a las PYMEs en la gestión de proyectos para el desarrollo seguro y posterior mantenimiento de la seguridad de sus servicios de TI. En segundo lugar, cubrir esta necesidad desarrollando un marco de trabajo que ofrezca un modelo de proceso genérico aplicable sobre distintos patrones de proyecto y una librería de activos de seguridad que sirva a las PYMEs de guía durante el proceso de gestión del proyecto para el desarrollo seguro. El modelo de proceso del marco propuesto describe actividades en los tres niveles organizativos de la empresa (estratégico, táctico y operativo). Está basado en el ciclo de mejora continua (PDCA) y en la filosofía Seguridad por Diseño, propuesta por Siemens. Se detallan las prácticas específicas de cada actividad, las entradas, salidas, acciones, roles, KPIs y técnicas aplicables para cada actividad. Estas prácticas específicas pueden aplicarse o no, a criterio del jefe de proyecto y de acuerdo al estado de la empresa y proyecto que se quiera desarrollar, estableciendo así distintos patrones de proceso. Para la validación del marco se han elegido dos PYMEs. La primera del sector servicios y la segunda del sector TIC. El modelo de proceso ha sido aplicado sobre un mismo patrón de proyecto que responde a necesidades comunes a ambas empresas. El patrón de proceso ha sido valorado en los proyectos elegidos en ambas empresas, antes y después de su aplicación. Los resultados del estudio, después de su aplicación en ambas empresas, han permitido la validación del patrón de proceso, en la mejora de la gestión de proyecto para el desarrollo seguro de TI en las PYMEs. ABSTRACT Today a company without any IT service is not conceived, even if it is small either. It presents the challenge for each company to undertake projects to develop or contract IT services that support the different business processes of the company. On the other hand, unless IT services are isolated from whole network, which is virtually impossible at present, there is no service or project, which develops guaranteeing 100% security. So the company handles a duality, develop products / insurance IT services and constant maintenance of their IT services in a safe state. The project management for the development of IT services is addressed, in most companies, using different practices used in other projects and recommended for this purpose by frameworks and standards with greater recognition. Generally, these frameworks include, among its processes, risk management aimed at meeting deadlines, costs and, sometimes, the functionality of the product or service. However, safety issues such as confidentiality, integrity and availability of the product / service, necessary for the project, they are ignored in these practices. Moreover, once the service delivered at the operational level, when a fault on these safety issues arise, ad-hoc solutions are applied. This causes great losses and sometimes threatens the continuity of the company. This problem is adding more every day, in any kind of business and SMEs are, by their lack of knowledge of the problem itself and the lack of methodological and technical resources, the most vulnerable companies. For all these reasons, this thesis has two objectives. Firstly demonstrate the need for a framework that integrated with other possible frameworks and standards, it is simple to apply in different types and wingspans of projects, and to guide SMEs in the management of development projects safely, and subsequent maintenance of the security of their IT services. Secondly meet this need by developing a framework that provides a generic process model applicable to project different patterns and a library of security assets, which serve to guide SMEs in the process of project management for development safe. The process model describes the proposed activities under the three organizational levels of the company (strategic, tactical and operational). It is based on the continuous improvement cycle (PDCA) and Security Design philosophy proposed by Siemens. The specific practices, inputs, outputs, actions, roles, KPIs and techniques applicable to each activity are detailed. These specific practices can be applied or not, at the discretion of the project manager and according to the state of the company and project that the company wants to develop, establishing different patterns of process. Two SMEs have been chosen to validate the frame work. The first of the services sector and the second in the ICT sector. The process model has been applied on the same pattern project that responds to needs common to both companies. The process pattern has been valued at the selected projects in both companies before and after application. The results of the study, after application in both companies have enabled pattern validation process, improving project management for the safe development of IT in SMEs.