Un sistema para la deteccion de antioxidantes volatiles comunmente emitidos desde especias y hierbas medicinales

An apparatus which allows the direct measurement of the antioxidant capacity of volatiles compounds emitted from some herbs and culinary spices is described. The device comprises: a sample chamber, a mixing chamber, a pump and, a detection system. Volatiles from Clove (Syzygium aromaticum (L.) Merr. & L.M. Perry) were purged and captured into a DPPH-containing solution and changes in the absorbance were recorded on-line. Linear response was observed when temperature was set between 30-53 ºC; nitrogen flow was 15 mL min-1 during 60 min; DPPH concentration was 20 µmol L-1 and a sample size (powdered Clove) ranged between 200-1000 mg.

Determining the location for a mobile device by utilization of local resources of the environment

The subject being analyzed of this Master’s Thesis is a development of a service that is used to define a current location of a mobile device. The service utilized data that is obtained from own GPS receiver in some possible cases and as well data from mobile devices which can be afforded for the current environment for acquisition of more precise position of the device. The computation environment is based on context of a mobile device. The service is implemented as an application for communicator series Nokia N8XX. The Master’s Thesis presents theoretical concept of the method and its practical implementation, architecture of the application, requirements and describes a process of its functionality. Also users’ work with application is presented and recommendations for possible future improvements are made.

Kompressoriyksiköiden mekaaninen kunnonhallinta

Kunnossapidon kuluista suurimman osan aiheuttavat koneiden ennakoimattomat rikkoutumiset ja niiden tuomat tuotannonpysäytykset. Kunnossapidon suunnitelmallisuutta ja vikojen ennustettavuutta pyritään parantamaan erilaisin kunnonvalvonnallisin keinoin. Havaitsemalla alkava vikaantuminen ajoissa ja seuraamalla sen kehittymistä luodaan mahdollisuus korjaustoimenpiteiden ja -ajankohdan hallittuun suunnitteluun ja tätä kautta kustannussäästöihin. Tässä työssä on tutkittu kompressoriyksiköiden (kaasuturbiini ja keskipakokompressori) ja niiden apulaitteiden kunnossapidon menetelmiä, niiden hyödynnettävyyttä sekä mahdollisuuksia kehittää mekaanista kunnonhallintaa. Työssä päädyttiin johtopäätökseen, että käytettävien menetelmien hyödynnettävyydessä on kehitettävää. Kunnonvalvonnan ohjeistuksia tarkennettiin vastaamaan tämän päivän tavoitteita. Todettiin myös, että värähtelynvalvontaan perustuva kunnonvalvontajärjestelmä soveltuu hyvin kompressoriyksiköiden kunnonvalvonnan järjestelmäksi. Värähtelynvalvontaan perustuva kunnonvalvontajärjestelmä luo mahdollisuuden turvallisen käyttöajan ennustamiseen. Kunnonvalvonnan kehittämisen ja käyttövarmuuden parantamisen kannalta jatkotutkimuksen tekeminen kompressoriyksiköiden mekaanistenlaitteiden turvallisen käyttöajan ennustamiseksi on perusteltua.

Hvordan øve hellige handlinger? : en profesjonsdidaktisk studie av øving av muntlige ferdigheter innenfor en norsk presteutdanning

How can the holy craft of liturgy be trained? A study of approaches to instruction in training oral skills within education of the Norwegian clergy The theme of this study is the competence of expression of clerics performing liturgies as part of their duties in the Norwegian Lutheran Church. The aim of the study is to find a teaching practice which can raise the competence in oral expression characteristic of the clergy profession. The teaching practice is explored and discussed within the context of the basic education of the clergy. The main thesis is formulated as a question: How can the holy craft of liturgy be trained? An underpinning of the study is that liturgical acts are holy, which gives these performances an aspect of otherness. This otherness constitutes a clear agreement between the students and the teacher, and between the professional and the employer. The pre-understanding of the researcher is that these liturgical oral acts are trainable, and that there is a need and a necessity to train in these skills. Three research questions are elaborated on in the explorative section of the study: • What is characteristic of a competence of expression connected to the profession? • How can this competence of expression connected to liturgical performance be developed? • What is the importance of this competence in the holy craft of liturgy for the development of a cohesive professional self-understanding? The study is based on a research and development project where the researcher as the teacher and students from one specific clergy education in Norway (MF) were the source of the empirical material. The empirical data came from practice with two external observers› logs on the coaching, video observations, of the teacher and the students› texts on the practice under study, which is liturgical performance. The researcher›s log and field notes also provide material for the analysis. This is a qualitative project and an arts education project carried out within an interpretative framework. The theoretical framework has three perspectives: a structural approach based on the system theory of Niklas Luhmann, an epistemological approach discussing forms of knowledge in practice or informing practice and an arts education approach. The results indicate that the competence in oral liturgical performance can be considered a trainable skill, and that this training can be understood as an arts education method of instruction based on meaningful communication, dramaturgical thinking and the development of authenticity. The main result from this study can be considered as articulating and sketching the contours of the field of knowledge where the students embody the meaning of the clergy profession ‒ and this articulation has an innovative potential as knowledge combining experience and theoretical understanding.

Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.

Preventive diagnosis of dairy cow lameness

This research aimed to develop a Fuzzy inference based on expert system to help preventing lameness in dairy cattle. Hoof length, nutritional parameters and floor material properties (roughness) were used to build the Fuzzy inference system. The expert system architecture was defined using Unified Modelling Language (UML). Data were collected in a commercial dairy herd using two different subgroups (H1 and H2), in order to validate the Fuzzy inference functions. The numbers of True Positive (TP), False Positive (FP), True Negative (TN), and False Negative (FN) responses were used to build the classifier system up, after an established gold standard comparison. A Lesion Incidence Possibility (LIP) developed function indicates the chances of a cow becoming lame. The obtained lameness percentage in H1 and H2 was 8.40% and 1.77%, respectively. The system estimated a Lesion Incidence Possibility (LIP) of 5.00% and 2.00% in H1 and H2, respectively. The system simulation presented 3.40% difference from real cattle lameness data for H1, while for H2, it was 0.23%; indicating the system efficiency in decision-making.

Ulkomaalaislupaprosessin läpäisyaikojen hallinta poliisilaitoksella

Tämä diplomityö käsittelee Lappeenrannan teknillisen yliopiston ja Etelä- Karjalan poliisilaitoksen yhteistä kehitysprojektia, jonka tavoitteena oli tuottaa käytäntöön vietävissä oleva kehittämissuunnitelma ulkomaalaislupa-asioiden läpäisyaikojen hallintaan. Kehitysalueita on pyritty löytämään poliisilaitoksen henkilöstön haastatteluilla ja prosessianalyyseilla. Työ sisältää teoriaosion määräaikahallinnasta, yleiskatsauksen ulkomaalaislupa-asioista Suomessa sekä selvityksen ulkomaalaislupa-asioiden tilanteesta Etelä-Karjalan poliisilaitoksella. Työssä muodostettiin kolme kehittämisteemaa: seurannan kehittäminen, prosessien ja työtapojen kehittäminen ja yhteistyön kehittäminen. Tärkein kehittämistoimi oli Excel-pohjaisen seurantajärjestelmän suunnittelu, rakentaminen ja käyttöönottaminen. Seurantajärjestelmää voidaan hyödyntää tehtävien päivittäisessä ohjauksessa, määräaikatavoitteiden toteutumisen seurannassa sekä tilannekuvan ylläpitämisessä. Tavoitetilanteessa seurantajärjestelmän avulla hallitaan tilannetta siten, että hallitsemattomia hakemusruuhkia ei synny. Hankkeesta saatuja kokemuksia tehtäväjonojen hallinnasta ja suorituskyvyn mittaamisesta voidaan ajatella hyödynnettävän myös muissa prosesseissa.

Tasasähkönjakeluverkon asiakaspäätelaitteen galvaanisen erotuksen toteuttaminen

Tässä työssä tutkitaan LLC resonanssipiirin soveltuvuutta galvaanisen erotuksen toteuttamiseen tasasähkönjakeluverkon asiakaspäätelaitteessa. Tarkastellaan resonanssipiirin ominaisuuksia ja aikaisempia käyttökohteita. Tutkitaan piirin soveltuvuutta vaihtosähkö sovellukseen ja esitellään piirin toimintaa, häviöitä ja ohjausta. Esitellään pulssin leveys moduloitu (PWM) ja pulssin tiheys moduloitu (PDM) invertteri sovellukset ja näiden toimintaa. Esitetään vielä parannusehdotuksia ja kytkentäkuvio kytkennän ominaisuuksien ja hyö-tysuhteen parantamiseksi. Tutkimuksessa selvisi, että suora PDM topologia ei sovellu tähän käyttötarkoitukseen suuren suodin induktanssin vuoksi. PWM invertteri topologia jännitteen tasasuuntauksella taas sopii sovellukseen ja tällä rakenteella on mahdollista tehdä galvaaninen erotus hyvinkin hyvällä hyötysuhteella. Pehmeän kytkennän aiheuttamien häviöiden tarkka määrittely simulointimallista on parhaimmillaankin vain suuntaa-antava, mutta tulokset olivat mielestäni oikein positiivisia. LLC resonanssipiirin toimintaa tutkittiin vain resonanssitaajuudella kytkettäessä, jolloin sen jännitevahvistusominaisuuksien hyödyntäminen jää tarkastelun ulko-puolelle.

Innovaatiotoiminnan nykytilan kartoittaminen - Case: Mikkelin ammattikorkeakoulu

Diplomityö on tehty Mikkelin ammattikorkeakoululle tavoitteenaan kartoittaa kyseisen organisaation innovaatiotoiminnan nykytila. Tunnistamalla innovaatiotoiminnan puutteet sekä hyvät käytännöt, voidaan toimintaa kehittää määrätietoisesti. Nykytilan kartoitus toteutettiin käytäntölähtöisen innovaatiotoiminnan näkökulmasta käsin. Työn teoreettinen tausta rakentuu ammattikorkeakoulujen TKI-toiminnan muutoksen, innovaatioiden ja innovaatiotoiminnan käytäntölähtöisyyden ympärille. Empiirinen aineisto kerättiin kyselytutkimuksen avulla, joka toteutettiin Mikkelin ammattikorkea-koulun henkilöstölle keväällä 2012. Tehdyssä tutkimuksessa oli kvalitatiivisen tutkimus-menetelmän lisäksi piirteitä kvantitatiivisesta tutkimusmenetelmästä, johtuen kyselyssä esitettyjen kysymysten luonteesta. Tutkimustulosten perusteella innovaatiotoiminnan nykytila ja siihen vaikuttavat tekijät kyettiin kuvaamaan. MAMKin innovaatiotoimintaan liittyvistä osa-alueista osassa käytännöt ja puitteet tukivat käytäntölähtöistä innovaatiotoimintaa, mutta myös selkeitä kehityskohteita havaittiin. Suurimmat kehityskohteet liittyivät sisäiseen verkostoitumiseen sekä henkilöstön ja opiskelijoiden innovaatiopotentiaalin täysimääräiseen hyödyntämiseen. Saatujen tulosten perusteella esitettiin keinoja innovaatiotoiminnan tehostamiseksi ja kehittämiseksi. Saadut tulokset ja niiden pohjalta annetut kehitysehdotukset luovat hyvät lähtökohdat Mikkelin ammattikorkeakoulun innovaatiotoiminnan kehittämiselle.

Knowledge sharing in intrafirm networks in organization

The objective of this study was research the shared knowledge and the means of sharing with the help of social network analysis. The purpose of this study was to give descriptive information to case-organization about its situational network status in different units. The premise of the study is the success of organizational competences and networks, especially when it comes to the sharing of knowledge. The research was accomplished in a TEKES –projects, Developing Network-Based Services – The Role of Competences and Networks COMNET –projects case-organization. Lappeenranta School of Business and the case-organization started the project in co-operation. The baseline for the study was organizational competencies and organizational networks as success factors, especially from the knowledge sharing’s point of view. The research was based on triangulation, which included pre-interviews, network analyses accomplished by Webropol –e-mail survey and qualitative interviews. The results indicated that regular unit meetings were experienced to be the most important method of knowledge sharing along with e-mailing, intranet and weekly bulletins. The co-operation between units was also experienced to be important when evaluating knowledge sharing and communication. The intrafirm network was experienced tight. Dispersed units and partly unclear means of information sharing were the biggest obstacles for information communication. Knowledge sharing, communication with others and trainings were seen important in the case-organization.

Novel Methods for Error Modeling and Parameter Identification of a Redundant Serial-Parallel Hybrid Robot

To obtain the desirable accuracy of a robot, there are two techniques available. The first option would be to make the robot match the nominal mathematic model. In other words, the manufacturing and assembling tolerances of every part would be extremely tight so that all of the various parameters would match the “design” or “nominal” values as closely as possible. This method can satisfy most of the accuracy requirements， but the cost would increase dramatically as the accuracy requirement increases. Alternatively, a more cost-effective solution is to build a manipulator with relaxed manufacturing and assembling tolerances. By modifying the mathematical model in the controller, the actual errors of the robot can be compensated. This is the essence of robot calibration. Simply put, robot calibration is the process of defining an appropriate error model and then identifying the various parameter errors that make the error model match the robot as closely as possible. This work focuses on kinematic calibration of a 10 degree-of-freedom (DOF) redundant serial-parallel hybrid robot. The robot consists of a 4-DOF serial mechanism and a 6-DOF hexapod parallel manipulator. The redundant 4-DOF serial structure is used to enlarge workspace and the 6-DOF hexapod manipulator is used to provide high load capabilities and stiffness for the whole structure. The main objective of the study is to develop a suitable calibration method to improve the accuracy of the redundant serial-parallel hybrid robot. To this end, a Denavit–Hartenberg (DH) hybrid error model and a Product-of-Exponential (POE) error model are developed for error modeling of the proposed robot. Furthermore, two kinds of global optimization methods, i.e. the differential-evolution (DE) algorithm and the Markov Chain Monte Carlo (MCMC) algorithm, are employed to identify the parameter errors of the derived error model. A measurement method based on a 3-2-1 wire-based pose estimation system is proposed and implemented in a Solidworks environment to simulate the real experimental validations. Numerical simulations and Solidworks prototype-model validations are carried out on the hybrid robot to verify the effectiveness, accuracy and robustness of the calibration algorithms.

Formal development and quantitative verification of dependable systems

-

Käytäntölähtöinen innovaatiotoiminta – Kaakkois-Suomen peliteollisuus

Tiede innovaatioiden synnyttäjänä on nykyisin ennemminkin oletus kuin totuus, ja monet innovaatiot syntyvät käytäntölähtöisten toimintojen kautta. Diplomityön päätavoitteena on määrittää käytäntölähtöinen innovaatiotoiminta. Tutkimus on toteutettu laadullisena case-tutkimuksena. Tutkimuksessa on haastateltu seitsemää pelinkehitysyritystä liittyen yritysten innovaatioprosesseihin ja käytäntölähtöiseen innovaatiotoimintaan. Lisäksi tutkimuksessa on haastateltu neljää voittoa tavoittelemattoman organisaation edustajaa Kymenlaakson innovaatiojärjestelmän nykytilasta. Teoriaosassa käydään läpi käytäntölähtöisen innovaation nykyisiä määritelmiä ja niihin liittyviä käsitteitä. Empiriaosassa esitetään haastatteluilla kerätyn aineiston analyysin perusteella tehdyt johtopäätökset. Teoria- ja empiriaosien avulla määritetään käytäntölähtöinen innovaatiotoiminta. Johtopäätöksissä määritetään käytäntölähtöisten innovaatioiden syntymekanismit ja lähteet. Lisäksi esitetään alueellisen innovaatiojärjestelmän asema käytäntölähtöisten innovaatioiden edistämisessä.

Switchable lanthanide fluorescence probes in homogenous molecular diagnostics

The number of molecular diagnostic assays has increased tremendously in recent years.Nucleic acid diagnostic assays have been developed, especially for the detection of human pathogenic microbes and genetic markers predisposing to certain diseases. Closed-tube methods are preferred because they are usually faster and easier to perform than heterogenous methods and in addition, target nucleic acids are commonly amplified leading to risk of contamination of the following reactions by the amplification product if the reactions are opened. The present study introduces a new closed-tube switchable complementation probes based PCR assay concept where two non-fluorescent probes form a fluorescent lanthanide chelate complex in the presence of the target DNA. In this dual-probe PCR assay method one oligonucleotide probe carries a non-fluorescent lanthanide chelate and another probe a light absorbing antenna ligand. The fluorescent lanthanide chelate complex is formed only when the non-fluorescent probes are hybridized to adjacent positions into the target DNA bringing the reporter moieties in close proximity. The complex is formed by self-assembled lanthanide chelate complementation where the antenna ligand is coordinated to the lanthanide ion captured in the chelate. The complementation probes based assays with time-resolved fluorescence measurement showed low background signal level and hence, relatively high nucleic acid detection sensitivity (low picomolar target concentration). Different lanthanide chelate structures were explored and a new cyclic seven dentate lanthanide chelate was found suitable for complementation probe method. It was also found to resist relatively high PCR reaction temperatures, which was essential for the PCR assay applications. A seven-dentate chelate with two unoccupied coordination sites must be used instead of a more stable eight- or nine-dentate chelate because the antenna ligand needs to be coordinated to the free coordination sites of the lanthanide ion. The previously used linear seven-dentate lanthanide chelate was found to be unstable in PCR conditions and hence, the new cyclic chelate was needed. The complementation probe PCR assay method showed high signal-to-background ratio up to 300 due to a low background fluorescence level and the results (threshold cycles) in real-time PCR were reached approximately 6 amplification cycles earlier compared to the commonly used FRET-based closed-tube PCR method. The suitability of the complementation probe method for different nucleic acid assay applications was studied. 1) A duplex complementation probe C. trachomatis PCR assay with a simple 10-minute urine sample preparation was developed to study suitability of the method for clinical diagnostics. The performance of the C. trachomatis assay was equal to the commercial C. trachomatis nucleic acid amplification assay containing more complex sample preparation based on DNA extraction. 2) A PCR assay for the detection of HLA-DQA1*05 allele, that is used to predict the risk of type 1 diabetes, was developed to study the performance of the method in genotyping. A simple blood sample preparation was used where the nucleic acids were released from dried blood sample punches using high temperature and alkaline reaction conditions. The complementation probe HLA-DQA1*05 PCR assay showed good genotyping performance correlating 100% with the routinely used heterogenous reference assay. 3) To study the suitability of the complementation probe method for direct measurement of the target organism, e.g., in the culture media, the complementation probes were applied to amplificationfree closed-tube bacteriophage quantification by measuring M13 bacteriophage ssDNA. A low picomolar bacteriophage concentration was detected in a rapid 20- minute assay. The assay provides a quick and reliable alternative to the commonly used and relatively unreliable UV-photometry and time-consuming culture based bacteriophage detection methods and indicates that the method could also be used for direct measurement of other micro-organisms. The complementation probe PCR method has a low background signal level leading to a high signal-to-background ratio and relatively sensitive nucleic acid detection. The method is compatible with simple sample preparation and it was shown to tolerate residues of urine, blood, bacteria and bacterial culture media. The common trend in nucleic acid diagnostics is to create easy-to-use assays suitable for rapid near patient analysis. The complementation probe PCR assays with a brief sample preparation should be relatively easy to automate and hence, would allow the development of highperformance nucleic acid amplification assays with a short overall assay time.

The accumulation of financial and social capital as a means to achieve a sustained competitive advantage for consumer co-operatives

By so far, scholars have discussed how the characteristics of consumer co-operatives (cooperative principles, values and the dual role of members as the users and owners) can potentially give them a competitive advantage over investor-owned firms (IOFs). In addition, concern for the community (as partly derived from locality and regionality) has been seen as a potential source of success for consumer co-operatives. On the other hand, the geographicbound purpose of consumer co-operation causes that consumer co-operative can be regarded as a challenging company form to manage. This is because, according to the purpose of consumer co-operation, co-operatives are obligated to 1) provide the owners with services and goods that are needed and do so at more affordable prices than their competitors do and/or 2) to operate in areas in which competitors do not want to operate (for example, because of the low profitability in certain area of business or region). Thus, consumer co-operatives have to operate very efficiently in order to execute this geographic-bound corporate purpose (e.g. they cannot withdraw from the competition during the declining stages of business). However, this efficiency cannot be achieved by any means; as the acceptance from the important regional stakeholders is the basic operational precondition and lifeline in the long run. Thereby, the central question for the survival and success of consumer co-operatives is; how should the consumer co-operatives execute its corporate purpose so it can be the best alternative to its members in the long run? This question has remained unanswered and lack empirical evidence in the previous studies on the strategic management of consumer cooperation. In more detail, scholars have not yet empirically investigated the question: How can consumer co-operatives use financial and social capital to achieve a sustained competitive advantage? It is this research gap that this doctoral dissertation aims to fulfil. This doctoral dissertation aims to answer the above questions by combining and utilizing interview data from S Group co-operatives and the central organizations in S Group´s network (overall, 33 interviews were gathered), archival material and 56 published media articles/reports. The study is based on a qualitative case study approach that is aimed at theory development, not theory verification (as the theory is considered as nascent in this field of study). Firstly, the findings of this study indicate that consumer co-operatives accumulate financial capital; 1) by making profit (to invest and grow) and 2) by utilizing a network-based organizational structure (local supply chain economies). As a result of financial capital accumulation, consumer co-operatives are able to achieve efficiency gains but also remain local. In addition, a strong financial capital base increases consumer co-operatives´ independence, competitiveness and their ability to participate in regional development (which is in accordance with their geographically bound corporate purpose). Secondly, consumer cooperatives accumulate social capital through informal networking (with important regional stakeholders), corporate social responsibility (CSR) behaviour and CSR reporting, pursuing common good, and interacting and identity sharing. As a result of social capital accumulation, consumer co-operatives are able to obtain the resources for managing; 1) institutional dependencies and 2) customer relations. By accumulating both social and financial capital through the above presented actions, consumer co-operatives are able to achieve sustained competitive advantage. Finally, this thesis provides useful ideas and new knowledge for cooperative managers concerning why and how consumer co-operatives should accumulate financial and social capital (to achieve sustained competitive advantage), while aligning with their corporate purpose.