Correlation of CXCL10, tumor necrosis factor receptor type II, and galectin 9 with disease activity in juvenile dermatomyositis.

OBJECTIVE: Juvenile dermatomyositis (DM) is a systemic autoimmune disorder of unknown immunopathogenesis in which the immune system targets the microvasculature of skeletal muscles, skin, and other organs. The current mainstay of therapy is a steroid regimen in combination with other immunosuppressive treatments. To date, no validated markers for monitoring disease activity have been identified, which hampers personalized treatment. This study was undertaken to identify a panel of proteins specifically related to active disease in juvenile DM. METHODS: We performed a multiplex immunoassay for plasma levels of 45 proteins related to inflammation in 25 patients with juvenile DM in 4 clinically well-defined groups, as determined by clinical activity and treatment. We compared them to 14 age-matched healthy children and 8 age-matched children with nonautoimmune muscle disease. RESULTS: Cluster analysis of circulating proteins showed distinct profiles for juvenile DM patients and controls based on a group of 10 proteins. In addition to CXCL10, tumor necrosis factor receptor type II (TNFRII) and galectin 9 were significantly increased in active juvenile DM. The levels of these 3 proteins were tightly linked to active disease and correlated with clinical scores (as measured by the Childhood Myositis Assessment Scale and physician's global assessment of disease activity on a visual analog scale). CONCLUSION: Our findings indicate that CXCL10, TNFRII, and galectin 9 correspond to disease status in juvenile DM and thus could be helpful in monitoring disease activity and guiding treatment. Furthermore, they might provide new knowledge about the pathogenesis of this autoimmune disease.

Differentially phased leaf growth and movements in Arabidopsis depend on coordinated circadian and light regulation.

In contrast to vastly studied hypocotyl growth, little is known about diel regulation of leaf growth and its coordination with movements such as changes in leaf elevation angle (hyponasty). We developed a 3D live-leaf growth analysis system enabling simultaneous monitoring of growth and movements. Leaf growth is maximal several hours after dawn, requires light, and is regulated by daylength, suggesting coupling between growth and metabolism. We identify both blade and petiole positioning as important components of leaf movements in Arabidopsis thaliana and reveal a temporal delay between growth and movements. In hypocotyls, the combination of circadian expression of PHYTOCHROME INTERACTING FACTOR4 (PIF4) and PIF5 and their light-regulated protein stability drives rhythmic hypocotyl elongation with peak growth at dawn. We find that PIF4 and PIF5 are not essential to sustain rhythmic leaf growth but influence their amplitude. Furthermore, EARLY FLOWERING3, a member of the evening complex (EC), is required to maintain the correct phase between growth and movement. Our study shows that the mechanisms underlying rhythmic hypocotyl and leaf growth differ. Moreover, we reveal the temporal relationship between leaf elongation and movements and demonstrate the importance of the EC for the coordination of these phenotypic traits.

Cardiac motion estimation by joint alignment of tagged MRI sequences

Image registration has been proposed as an automatic method for recovering cardiac displacement fields from Tagged Magnetic Resonance Imaging (tMRI) sequences. Initially performed as a set of pairwise registrations, these techniques have evolved to the use of 3D+t deformation models, requiring metrics of joint image alignment (JA). However, only linear combinations of cost functions defined with respect to the first frame have been used. In this paper, we have applied k-Nearest Neighbors Graphs (kNNG) estimators of the -entropy (H ) to measure the joint similarity between frames, and to combine the information provided by different cardiac views in an unified metric. Experiments performed on six subjects showed a significantly higher accuracy (p < 0.05) with respect to a standard pairwise alignment (PA) approach in terms of mean positional error and variance with respect to manually placed landmarks. The developed method was used to study strains in patients with myocardial infarction, showing a consistency between strain, infarction location, and coronary occlusion. This paper also presentsan interesting clinical application of graph-based metric estimators, showing their value for solving practical problems found in medical imaging.

Examination of Curing Criteria for Cold In-Place Recycling (Phase 3: Calibration of Moisture Loss Indices and Development of Stiffness Gain Model), TR-609, 2011

In the previous study, moisture loss indices were developed based on the field measurements from one CIR-foam and one CIR-emulsion construction sites. To calibrate these moisture loss indices, additional CIR construction sites were monitored using embedded moisture and temperature sensors. In addition, to determine the optimum timing of an HMA overlay on the CIR layer, the potential of using the stiffness of CIR layer measured by geo-gauge instead of the moisture measurement by a nuclear gauge was explored. Based on the monitoring the moisture and stiffness from seven CIR project sites, the following conclusions are derived: 1. In some cases, the in-situ stiffness remained constant and, in other cases, despite some rainfalls, stiffness of the CIR layers steadily increased during the curing time. 2. The stiffness measured by geo-gauge was affected by a significant amount of rainfall. 3. The moisture indices developed for CIR sites can be used for predicting moisture level in a typical CIR project. The initial moisture content and temperature were the most significant factors in predicting the future moisture content in the CIR layer. 4. The stiffness of a CIR layer is an extremely useful tool for contractors to use for timing their HMA overlay. To determine the optimal timing of an HMA overlay, it is recommended that the moisture loss index should be used in conjunction with the stiffness of the CIR layer.

Wireless Sensor Networks for Infrastructure Monitoring, TR-611, 2010

A good system of preventive bridge maintenance enhances the ability of engineers to manage and monitor bridge conditions, and take proper action at the right time. Traditionally infrastructure inspection is performed via infrequent periodical visual inspection in the field. Wireless sensor technology provides an alternative cost-effective approach for constant monitoring of infrastructures. Scientific data-acquisition systems make reliable structural measurements, even in inaccessible and harsh environments by using wireless sensors. With advances in sensor technology and availability of low cost integrated circuits, a wireless monitoring sensor network has been considered to be the new generation technology for structural health monitoring. The main goal of this project was to implement a wireless sensor network for monitoring the behavior and integrity of highway bridges. At the core of the system is a low-cost, low power wireless strain sensor node whose hardware design is optimized for structural monitoring applications. The key components of the systems are the control unit, sensors, software and communication capability. The extensive information developed for each of these areas has been used to design the system. The performance and reliability of the proposed wireless monitoring system is validated on a 34 feet span composite beam in slab bridge in Black Hawk County, Iowa. The micro strain data is successfully extracted from output-only response collected by the wireless monitoring system. The energy efficiency of the system was investigated to estimate the battery lifetime of the wireless sensor nodes. This report also documents system design, the method used for data acquisition, and system validation and field testing. Recommendations on further implementation of wireless sensor networks for long term monitoring are provided.

Differentiating schizoaffective and bipolar I disorder in first-episode psychotic mania.

OBJECTIVE: This study aims to differentiate schizoaffective disorder (SAD) and bipolar-I-disorder (BD) in first-episode psychotic mania (FEPM). METHODS: All 134 patients from an epidemiological first-episode psychosis cohort (N=786) with FEPM and an 18-month follow-up final diagnosis of SAD (n=36) or BD (n=98) were assessed with respect to pre-treatment, baseline and outcome differences. Second, patients with baseline BD who shifted (shifted BD) or did not shift to SAD (stable BD) over the follow-up period were compared regarding pre-treatment and baseline differences. RESULTS: SAD patients displayed a significantly longer duration of untreated psychosis (DUP; effect size r=0.35), a higher illness-severity at baseline (r=0.20) and more traumatic events (Cramer-V=0.19). SAD patients displayed a significantly higher non-adherence rate (Cramer-V=0.19); controlling for time in treatment and respective baseline scores, SAD patients had significantly worse illness severity (CGI-S; partial η(2)=0.12) and psychosocial functioning (GAF; partial η(2)=0.07) at 18-months, while BD patients were more likely to achieve remission of positive symptoms (OR=4.9, 95% CI=1.8-13.3; p=0.002) and to be employed/occupied (OR=7.7, 95% CI=2.4-24.4, p=0.001). The main discriminator of stable and shifted BD was a longer DUP in patients shifting from BD to SAD. CONCLUSIONS: It is difficult to distinguish BD with psychotic symptoms and SAD in patients presenting with FEPM. Longer DUP is related to SAD and to a shift from BD to SAD. Compared to BD, SAD had worse outcomes and higher rates of non-adherence with medication. Despite these differences, both diagnostic groups need careful dimensional assessment and monitoring of symptoms and functioning in order to choose the right treatment.

Management Strategy for Iowa’s Water Resources, December 2007

In Iowa, the Department of Natural Resources (DNR)is responsible for regulating water allocation and use through the issuance of water use permits, but improvements are necessary in this process to assure sustainable supplies into the future. In recent years, there have not been resources dedicated at the state level to properly track and assess water quantity issues. Resources for water use and water quantity monitoring (groundwater level and surface gauges) have continued to decline and have resulted in data becoming outdated and in a format that is difficult to analyze in order to make good decisions.

Traitement des dyslipidémies et atteinte hépatique [Lipid-lowering treatment and liver dysfunction].

Statins are a cornerstone of cardiovascular prevention. Their utilization is mostly well tolerated and safe: the commonly reported hepatic adverse effect is an asymptomatic, reversible and dose-related increase in liver enzyme levels occurring in case of risks factors. Statins do not worsen liver function in most patients with chronic liver diseases, including nonalcoholic fatty liver disease and hepatitis C, and might be used cautionsly. However, decompensated cirrhosis and acute liver failure are contraindications for statins. Routine hepatic biochemical test monitoring is questioned and might be performed in following situations: chronic liver diseases, alcohol consumption, drug interactions. Other causes should be screened and treatment be temporarily withheld in case of an ALT elevation > 3 times the upper limit of the norm.

Quantitative multi-parameter mapping of R1, PD(*), MT, and R2(*) at 3T: a multi-center validation.

Multi-center studies using magnetic resonance imaging facilitate studying small effect sizes, global population variance and rare diseases. The reliability and sensitivity of these multi-center studies crucially depend on the comparability of the data generated at different sites and time points. The level of inter-site comparability is still controversial for conventional anatomical T1-weighted MRI data. Quantitative multi-parameter mapping (MPM) was designed to provide MR parameter measures that are comparable across sites and time points, i.e., 1 mm high-resolution maps of the longitudinal relaxation rate (R1 = 1/T1), effective proton density (PD(*)), magnetization transfer saturation (MT) and effective transverse relaxation rate (R2(*) = 1/T2(*)). MPM was validated at 3T for use in multi-center studies by scanning five volunteers at three different sites. We determined the inter-site bias, inter-site and intra-site coefficient of variation (CoV) for typical morphometric measures [i.e., gray matter (GM) probability maps used in voxel-based morphometry] and the four quantitative parameters. The inter-site bias and CoV were smaller than 3.1 and 8%, respectively, except for the inter-site CoV of R2(*) (<20%). The GM probability maps based on the MT parameter maps had a 14% higher inter-site reproducibility than maps based on conventional T1-weighted images. The low inter-site bias and variance in the parameters and derived GM probability maps confirm the high comparability of the quantitative maps across sites and time points. The reliability, short acquisition time, high resolution and the detailed insights into the brain microstructure provided by MPM makes it an efficient tool for multi-center imaging studies.

Software Process Modeling with Eclipse Process Framework

The software development industry is constantly evolving. The rise of the agile methodologies in the late 1990s, and new development tools and technologies require growing attention for everybody working within this industry. The organizations have, however, had a mixture of various processes and different process languages since a standard software development process language has not been available. A promising process meta-model called Software & Systems Process Engineering Meta- Model (SPEM) 2.0 has been released recently. This is applied by tools such as Eclipse Process Framework Composer, which is designed for implementing and maintaining processes and method content. Its aim is to support a broad variety of project types and development styles. This thesis presents the concepts of software processes, models, traditional and agile approaches, method engineering, and software process improvement. Some of the most well-known methodologies (RUP, OpenUP, OpenMethod, XP and Scrum) are also introduced with a comparison provided between them. The main focus is on the Eclipse Process Framework and SPEM 2.0, their capabilities, usage and modeling. As a proof of concept, I present a case study of modeling OpenMethod with EPF Composer and SPEM 2.0. The results show that the new meta-model and tool have made it possible to easily manage method content, publish versions with customized content, and connect project tools (such as MS Project) with the process content. The software process modeling also acts as a process improvement activity.

Population specific and up to date cardiovascular risk charts can be efficiently obtained with record linkage of routine and observational data.

BACKGROUND: Only few countries have cohorts enabling specific and up-to-date cardiovascular disease (CVD) risk estimation. Individual risk assessment based on study samples that differ too much from the target population could jeopardize the benefit of risk charts in general practice. Our aim was to provide up-to-date and valid CVD risk estimation for a Swiss population using a novel record linkage approach. METHODS: Anonymous record linkage was used to follow-up (for mortality, until 2008) 9,853 men and women aged 25-74 years who participated in the Swiss MONICA (MONItoring of trends and determinants in CVD) study of 1983-92. The linkage success was 97.8%, loss to follow-up 1990-2000 was 4.7%. Based on the ESC SCORE methodology (Weibull regression), we used age, sex, blood pressure, smoking, and cholesterol to generate three models. We compared the 1) original SCORE model with a 2) recalibrated and a 3) new model using the Brier score (BS) and cross-validation. RESULTS: Based on the cross-validated BS, the new model (BS = 14107×10(-6)) was somewhat more appropriate for risk estimation than the original (BS = 14190×10(-6)) and the recalibrated (BS = 14172×10(-6)) model. Particularly at younger age, derived absolute risks were consistently lower than those from the original and the recalibrated model which was mainly due to a smaller impact of total cholesterol. CONCLUSION: Using record linkage of observational and routine data is an efficient procedure to obtain valid and up-to-date CVD risk estimates for a specific population.

Electrical source imaging for presurgical focus localization in epilepsy patients with normal MRI.

PURPOSE: Patients with magnetic resonance (MR)-negative focal epilepsy (MRN-E) have less favorable surgical outcomes (between 40% and 70%) compared to those in whom an MRI lesion guides the site of surgical intervention (60-90%). Patients with extratemporal MRN-E have the worst outcome (around 50% chance of seizure freedom). We studied whether electroencephalography (EEG) source imaging (ESI) of interictal epileptic activity can contribute to the identification of the epileptic focus in patients with normal MRI. METHODS: We carried out ESI in 10 operated patients with nonlesional MRI and a postsurgical follow-up of at least 1 year. Five of the 10 patients had extratemporal lobe epilepsy. Evaluation comprised surface and intracranial EEG monitoring of ictal and interictal events, structural MRI, [(18)F]fluorodeoxyglucose positron emission tomography (FDG-PET), ictal and interictal perfusion single photon emission computed tomography (SPECT) scans. Eight of the 10 patients also underwent intracranial monitoring. RESULTS: ESI correctly localized the epileptic focus within the resection margins in 8 of 10 patients, 9 of whom experienced favorable postsurgical outcomes. DISCUSSION: The results highlight the diagnostic value of ESI and encourage broadening its application to patients with MRN-E. If the surface EEG contains fairly localized spikes, ESI contributes to the presurgical decision process.

Teleoperaattorinlaajakaistaviankorjauksen tehostaminen

Työssä tutkittiin voidaanko helpdesk-asiantuntijoille kehitetyn asiantuntijan ja tietojärjestelmän väliseen dialogiin ja puumaiseen ongelmanratkaisulogiikkaan perustuvan tukijärjestelmän käytöllä tehostaa laajakaistaliittymäviankorjausta. Työ selvitti dialogi-työkalun käyttöönoton jälkeisen vuoden seurantajakson aikana helpdeskin ongelmanratkaisuasteen ja liittymäviankorjausprosessin kehitystä sekä arvioi prosessin tehostumisen vaikutusta palvelun laatuun. Seurantajakson aikana helpdeskissä päätettyjen asiakaskontaktien määrä kasvoi merkittävästi, viankorjausprosessin keskimääräinenläpimenoaika lyhentyi ja vikailmoituksen kohdentamistarkkuus oikeaan työjonoon parani. Prosessin tehostumista kuvaavien mittareiden muutos on tilastollisesti erittäin merkitsevä. Dialogi-työkalulla voidaan tehostaa laajakaistaliittymien viankorjausprosessia merkittävästi ja vaikuttaa joiltain osin myös palvelun laatuun.

The Development of Weak Signal Concept

Tämän hetken trendit kuten globalisoituminen, ympäristömme turbulenttisuus, elintason nousu, turvallisuuden tarpeen kasvu ja teknologian kehitysnopeus korostavatmuutosten ennakoinnin tarpeellisuutta. Pysyäkseen kilpailukykyisenä yritysten tulee kerätä, analysoida ja hyödyntää liiketoimintatietoa, jokatukee niiden toimintaa viranomaisten, kilpailijoiden ja asiakkaiden toimenpiteiden ennakoinnissa. Innovoinnin ja uusien konseptien kehittäminen, kilpailijoiden toiminnan arviointi, asiakkaiden tarpeet muun muassa vaativatennakoivaa arviointia. Heikot signaalit ovat keskeisessä osassa organisaatioiden valmistautumisessa tulevaisuuden tapahtumiin. Opinnäytetyön tarkoitus on luoda ja kehittää heikkojen signaalien ymmärrystä ja hallintaa sekäkehittää konseptuaalinen ja käytännöllinen lähestymistapa ennakoivan toiminnan edistämiselle. Heikkojen signaalien tyyppien luokittelu perustuu ominaisuuksiin ajan, voimakkuuden ja liiketoimintaan integroinnin suhteen. Erityyppiset heikot signaalit piirteineen luovat reunaehdot laatutekijöiden keräämiselle ja siitä edelleen laatujärjestelmän ja matemaattiseen malliin perustuvan työvälineen kehittämiselle. Heikkojen signaalien laatutekijät on kerätty yhteen kaikista heikkojen signaalien konseptin alueista. Analysoidut ja kohdistetut laatumuuttujat antavat mahdollisuuden kehittää esianalyysiä ja ICT - työvälineitä perustuen matemaattisen mallin käyttöön. Opinnäytetyön tavoitteiden saavuttamiseksi tehtiin ensin Business Intelligence -kirjallisuustutkimus. Hiekkojen signaalien prosessi ja systeemi perustuvat koottuun Business Intelligence - systeemiin. Keskeisinä kehitysalueina tarkasteltiin liiketoiminnan integraatiota ja systemaattisen menetelmän kehitysaluetta. Heikkojen signaalien menetelmien ja määritelmien kerääminen sekä integrointi määriteltyyn prosessiin luovat uuden konseptin perustan, johon tyypitys ja laatutekijät kytkeytyvät. Käytännöllisen toiminnan tarkastelun ja käyttöönoton mahdollistamiseksi toteutettiin Business Intelligence markkinatutkimus (n=156) sekä yhteenveto muihin saatavilla oleviin markkinatutkimuksiin. Syvähaastatteluilla (n=21) varmennettiin laadullisen tarkastelun oikeellisuus. Lisäksi analysoitiin neljä käytännön projektia, joiden yhteenvedot kytkettiin uuden konseptin kehittämiseen. Prosessi voidaan jakaa kahteen luokkaan: yritysten markkinasignaalit vuoden ennakoinnilla ja julkisen sektorin verkostoprojektit kehittäen ennakoinnin struktuurin luonnin 7-15 vuoden ennakoivalle toiminnalle. Tutkimus rajattiin koskemaan pääasiassa ulkoisen tiedon aluetta. IT työvälineet ja lopullisen laatusysteemin kehittäminen jätettiin tutkimuksen ulkopuolelle. Opinnäytetyön tavoitteena ollut heikkojen signaalien konseptin kehittäminen toteutti sille asetetut odotusarvot. Heikkojen signaalien systemaattista tarkastelua ja kehittämistyötä on mahdollista edistää Business Intelligence - systematiikan hyödyntämisellä. Business Intelligence - systematiikkaa käytetään isojen yritysten liiketoiminnan suunnittelun tukena.Organisaatioiden toiminnassa ei ole kuitenkaan yleisesti hyödynnetty laadulliseen analyysiin tukeutuvaa ennakoinnin weak signals - toimintaa. Ulkoisenja sisäisen tiedon integroinnin ja systematiikan hyödyt PK -yritysten tukena vaativat merkittävää panostusta julkishallinnon rahoituksen ja kehitystoiminnan tukimuotoina. Ennakointi onkin tuottanut lukuisia julkishallinnon raportteja, mutta ei käytännön toteutuksia. Toisaalta analysoitujen case-tapausten tuloksena voidaan nähdä, ettei organisaatioissa välttämättä tarvita omaa projektipäällikköä liiketoiminnan tuen kehittämiseksi. Business vastuun ottamiseksi ja asiaan sitoutumiseen on kuitenkin löydyttävä oikea henkilö

Improving globally distributed software development and support processes - A workflow view

We propose a new approach and related indicators for globally distributed software support and development based on a 3-year process improvement project in a globally distributed engineering company. The company develops, delivers and supports a complex software system with tailored hardware components and unique end-customer installations. By applying the domain knowledge from operations management on lead time reduction and its multiple benefits to process performance, the workflows of globally distributed software development and multitier support processes were measured and monitored throughout the company. The results show that the global end-to-end process visibility and centrally managed reporting at all levels of the organization catalyzed a change process toward significantly better performance. Due to the new performance indicators based on lead times and their variation with fixed control procedures, the case company was able to report faster bug-fixing cycle times, improved response times and generally better customer satisfaction in its global operations. In all, lead times to implement new features and to respond to customer issues and requests were reduced by 50%.