Unintentionally retained foreign bodies after surgical procedures. Analysis of 4547 cases

Objective: this study aims to explore the experience of Brazilian surgeons on Unintentionally Retained Foreign Bodies (RFB) after surgical procedures. Methods: A questionnaire was sent to surgeons by electronic mail, between March and July 2012. The questions analyzed their experience with foreign bodies (FB), foreign bodies' types, clinical manifestations, diagnoses, risk factors and legal implications. Results: in the 2872 eligible questionnaires, 43% of the surgeons asserted that they had already left FB and 73% had removed FB in one or more occasions, totalizing 4547. Of these foreign bodies, 90% were textiles, 78% were discovered in the first year and 14% remained asymptomatic. Among doctors with less than five years after graduation, 36% had already left a FB. The most frequently surgical procedures mentioned were the elective (57%) and routine (85%) ones. Emergency (26%), lack of counting (25%) and inadequate conditions of work contributed (12.5%) to the occurrence. In 46% of the cases patients were alerted about the FB, and 26% of them sued the doctors or the institution. Conclusions: challenging medical situations, omission of security protocols and inadequate work conditions contributed to RFB. However, RFB occurs mostly in routine procedures such as cesarean or cholecystectomy, and at the beginning of the professional career, highlighting, particularly in poorest countries, the need for primary prevention. Textiles predominated causing clinical repercussions and they were diagnosed in the first postoperative months. Surgeons were sued in 11.3% of the RFB cases.

Fatores Associados ao Material Insuficiente em Punção Aspirativa por Agulha Fina nos Nódulos Sólidos da Mama

Objetivo: analisar alguns fatores que possam estar associados à ocorrência de material insuficiente nos aspirados da punção aspirativa por agulha fina (PAAF). Pacientes e Métodos: foram estudadas 351 citologias de pacientes com nódulos sólidos da mama, submetidas a PAAF, como parte de sua investigação diagnóstica. As lâminas foram analisadas por um único citologista, que classificou os esfregaços como malignos, suspeitos, benignos ou material insuficiente para diagnóstico. Foram avaliados a idade da paciente, o tamanho do tumor, o estádio clínico, o Serviço, o dispositivo utilizado na punção e o tipo de lesão puncionada, de acordo com a histologia. A significância de cada variável em relação ao material insuficiente foi testada pelo c². Resultados: houve 67 esfregaços classificados como material insuficiente (19%). O tipo de dispositivo utilizado, o tamanho do tumor, o Serviço e o estádio clínico das lesões não se relacionaram à quantidade de material suficiente ou insuficiente. A idade da paciente e o tipo histológico influenciaram a taxa de material insuficiente, sendo que as pacientes abaixo de 50 anos tiveram uma taxa de 12%, comparada a 30% daquelas acima de 50 anos (p<0,03). Quanto à histologia, nas pacientes com alterações funcionais benignas da mama, a taxa de material insuficiente foi de 30%, seguida daquelas com carcinoma ductal infiltrante, 20%, e, no fibroadenoma, 12% (p<0,02). Conclusão: esse estudo mostrou uma taxa de material insuficiente relativamente alta (19%), a qual foi influenciada pela idade da paciente e pelo tipo histológico da lesão.

Abordagem citogenética e molecular em material de abortos espontâneos

OBJETIVOS: avaliar o desempenho da citogenética e das técnicas de hibridização in situ fluorescente (FISH) e reação em cadeia da polimerase (PCR) no estudo das aneuploidias cromossômicas numéricas e na determinação do sexo fetal em amostras de abortos espontâneos. MÉTODOS: duzentos e dezenove amostras de produtos de abortos espontâneos foram submetidas a estudo citogenético. Deste total, 40 amostras foram também submetidas à técnica de PCR-nested para a determinação do sexo fetal: 32 foram selecionadas devido à falha de crescimento no estudo citogenético e oito foram escolhidas ao acaso. Vinte amostras foram selecionadas para detecção de aneuploidias cromossômicas pela técnica de FISH, utilizando-se sondas para os cromossomos 13, 18, 21, X e Y: 13 casos foram submetidos a FISH devido à falha de crescimento no estudo citogenético e sete foram escolhidos ao acaso. Foi calculada a taxa de sucesso (obtenção de cariótipo) de cada técnica. Para comparação das taxas de sucesso foi utilizado o teste de chi2, sendo considerados significantes resultados com p<0,05. Foi avaliado o índice de acerto entre os resultados das amostras submetidas a mais de um exame, tomando-se como padrão-ouro o resultado do estudo citogenético. RESULTADOS: houve crescimento celular em 84,9% das amostras submetidas a análise citogenética. Em 51,1% dos casos foram encontradas alterações cromossômicas: 65,2% trissomias, 17,9% triploidias, 9,4% tetraploidias, 4,2% monossomia do cromossomo X e 1,1% trissomia dupla, tetrassomia e alteração estrutural. A trissomia mais freqüente foi a do cromossomo 16 (39%). FISH e PCR tiveram taxa de sucesso de 90%, não diferindo significativamente do exame citogenético. Em todos os casos submetidos a mais de um exame os resultados foram concordantes. Nas amostras com falha de crescimento celular no exame citogenético e submetidas a outra técnica, a PCR obteve sucesso em 87,5% e a FISH em 84,6%. CONCLUSÃO: o estudo citogenético de restos ovulares de abortamentos espontâneos teve elevada taxa de sucesso e evidenciou anomalias cromossômicas em mais da metade dos casos. As técnicas de biologia molecular (PCR-nested e FISH) complementaram o estudo citogenético e permitiram a obtenção de resultados seguros na detecção de alterações cromossômicas numéricas e na determinação do sexo fetal.

Infeccoes de transmissao vertical em material abortivo e sangue com enfase em Toxoplasmose gondii

OBJETIVO: Analisar os resultados sorológicos, anatomopatológicos e parasitológicos de material abortivo para infecções com risco de transmissão vertical, com ênfase na toxoplasmose. MÉTODOS: Foi realizado um estudo coorte-transversal tratando da prevalência das doenças infectoparasitárias. Participaram da pesquisa 105 mulheres que sofreram aborto espontâneo completo e/ou incompleto; elas foram entrevistadas por meio de um questionário, e foram coletadas amostras de sangue e material abortivo. Foram realizados testes imunológicos para toxoplasmose, doença de Chagas, rubéola, citomegalovírus e sífilis e análise anatomopatológica nos restos ovulares. RESULTADOS: 55% das mulheres tinham entre 20 e 30 anos de idade. A maioria (68%) apresentou idade gestacional entre a 7ª e a 14ª semanas. 54,3% das mulheres tinham o ensino médio completo ou incompleto. Pela análise da sorologia, a infecção com risco de transmissão vertical mais frequente foi o citomegalovírus (CMV) com 97,1% de positividade, e em seguida a rubéola, com 95,2%. A toxoplasmose teve um percentual de 54,3%, a doença de Chagas, de 1,9% e a sífilis, de 0,95%. A análise dos laudos de biópsia demonstrou que 63,1% apresentaram inflamação e 34%, ausência de inflamação. Das análises sorológica, anatomopatológica e parasitológica das 105 mulheres, 57 foram soropositivas para T. gondii, e nenhuma teve resultado positivo para a Reação em Cadeia da Polimerase (PCR) e para inoculação em camundongos. CONCLUSÕES: A prevalência de doenças com risco de transmissão congênita nas mulheres com abortamento espontâneo é importante, sendo necessárias pesquisas visando esclarecer a etiologia do aborto.

Summaries of lecture recordings used as learning material in blended learning

Julkaisumaa: 530 AN ANT Alankomaiden Antillit

Logistics of North-West Russia and Rail Baltica: Standpoints of Private Sector

The main aims of the present report are to describe the current state of railway transport in Russia, and to gather standpoints of Russian private transportation logistics sector towards the development of new railway connection called Rail Baltica Growth Corridor, connecting North-West Russia with Germany through the Baltic States and Poland. North-West Russia plays important role not only in Russian logistics, but also wider European markets as in container sea ports handling is approx. 2.5 mill. TEU p.a. and handling volume in all terminals is above 190 million tons p.a. The whole transportation logistics sector is shortly described as an operational environment for railways – this is done through technical and economic angles. Transportation development is always going in line with economics of the country, so the analysis on economical development is also presented. Logistics integration of the country is strongly influenced by its engagement in the international trade. Although, raw material handling at sea ports and container transports (imports) are blossoming, domestic transportation market is barely growing (in long-term perspective). Thus, recent entrance of Russia into World Trade Organization (WTO) is analyzed theme in this research, as the WTO is an important regulator of the foreign trade and enabler of volume growth in foreign trade related transportation logistics. However, WTO membership can influence negatively the development of Russia’s own industry and its volumes (these have been uncompetitive in global markets for decades). Data gathering in empirical part was accomplished by semi-structured case study interviews among North-West Russian logistics sector actors (private). These were conducted during years 2012-2013, and research compiles findings out of ten case company interviews. Although, there was no sea port involved in the study, most of the interviewed companies relied in European Logistics within significant parts in short sea shipping and truck combined transportation chains (in Russian part also using railways). As the results of the study, it could be concluded that Rail Baltica is seen as possible transport corridor in most of the interviewed companies, if there is enough cargo available. However, interviewees are a bit sceptical, because major and large-scale infrastructural improvements are needed. Delivery time, frequency and price level are three main factors influencing the attractiveness of Rail Baltica route. Price level is the most important feature, but if RB can offer other advantages such as higher frequency, shorter lead times or more developed set of value-added services, then some flexibility is possible for the price level. Environmental issues are not the main criteria of today, but are recognized and discussed among customers. Great uncertainty exists among respondents e.g. on forthcoming sulphur oxide ban on Baltic Sea shipping (whether or not it is going to be implemented in Russia). Rather surprisingly, transportation routes to Eastern Europe and Mediterranean area are having higher value and price space than those to Germany/Central Europe. Border crossing operations (traction monopoly at rails and customs), gauge widths as well as unclear decision-making processes (in Russia), are named as hindering factors. Performance standards for European connected logistics among Russian logistics sector representatives are less demanding as compared to neighbourhood countries belonging to EU.

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

Punção aspirativa por agulha fina como método de coleta de material para a histopatologia no osteossarcoma canino

Para a obtenção do diagnóstico definitivo do osteossarcoma realizam-se exames citopatológico e histopatológico. O material para exame citopatológico é coletado através de punção aspirativa por agulha fina (PAAF), já para a realização do exame histopatológico é necessário uma amostra de tamanho maior, geralmente conseguida através de biópsia incisional. Este trabalho tem como objetivo desenvolver uma técnica de coleta de material em cães com suspeita de osteossarcoma através de PAAF para a realização de exame histopatológico. Foram coletadas duas amostras de 12 cães suspeitos de osteossarcoma por PAAF. O material obtido pela primeira coleta foi utilizado para confirmar o diagnóstico através do exame citopatológico, enquanto que o material oriundo da segunda coleta foi fixado em formol a 10% para a análise histopatológica. Quatro das 12 amostras (33,3%) avaliadas histopatologicamente pela metodologia proposta obtiveram também o diagnóstico de osteossarcoma. Esses resultados apontam para uma possível adequação da técnica de coleta de material por PAAF para exame histopatológico.

Carbon Nanotubes as Material for Supercapacitor Electrodes

Electrochemical double-layer supercapacitors have an intermediate position between rechargeable batteries, which can store high amounts of energy, and dielectric capacitors, which have high output power. Supercapacitors are widely suggested to be used in automobiles (recuperation during braking, facilitate engine starting, electric stabilization of the system), industry (forklifts, elevators), hybrid off-road machinery and also in consumer electronics. Supercapacitor electrodes require highly porous material. Typically, activated carbon is used. Specific surface area of activated carbon is approximately 1000 m2 per gram. Carbon nanotubes represent one of prospective materials. According to numerous studies this material allows to improve the properties of supercapacitors. The task of this Master‘s Thesis was to test multiwalled carbon nanotubes and become confident with the testing methods.

Suomalaisten metsäteollisuusyhtiöiden suorat investoinnit Kiinaan ja OLI-paradigma

Tämän tutkimuksen tavoitteena on selvittää, mitkä tekijät aiheuttavat suomalaisten metsäteollisuusyhtiöiden suorien investointien kasvua Kiinassa. Tutkimuksessa tarkastellaan kahden Suomen johtavan metsäteollisuusyrityksen, UPM:n sekä Stora Enson, suoria investointeja Kiinaan paperi- ja kartonkiteollisuudessa. Taustateoriana on OLI-paradigma, jonka avulla tutkitaan investointeihin vaikuttavia yritys- ja sijaintikohtaisia tekijöitä sekä syitä siihen, miksi yritys valitsee suoran investoinnin kansainvälistymismuodoksi. Tutkimus on kvalitatiivinen, ja aineisto koostuu muun muassa yritysten vuosikertomuksista sekä maita koskevista tutkimuksista ja tilastoista. Tutkimuksen tulokset osoittavat, että omistajuuskohtaisista tekijöistä tutkimus- ja kehitystoiminta, tuoteinnovaatiot sekä yritysvastuullisuus ovat suomalaisyhtiöiden vahvuuksia Kiinassa. Kiinan ominaisuuksista puolestaan markkinoiden koko ja liiketoimintaympäristö ovat keskeisiä investointien kasvua selittäviä tekijöitä.

A Steel Company Entering the Market Area of St. Petersburg

Tutkimuksen tavoitteena on selvittää tarkoituksenmukaisin etabloitumismenetelmä teräsyhtiön kansainvälistymisessä Pietarin markkinoille. Vaikka kansainvälistymistä onkin tutkittu paljon, kyseisen kontekstin erityispiirteisiin on aiemmissa tutkimuksissa kiinnitetty vain vähän huomiota. Kansainvälistymisteorioista työhön valittiin John Dunningin eklektinen paradigma sekä Uppsala-malli. Etabloitumismenetelmän valintaa puolestaan tarkastellaan eri vaihtoehtojen kautta, jotka kattavat viennin, suorat ulkomaan investoinnit, sopimusjärjestelyt sekä yhteisyrityksen. Valintaa selitetään taustalla vaikuttavien tekijöiden sekä kansainvälistymisprosessin kautta. Kohteena olevan markkina-alueen potentiaalin, ongelmien sekä yrityksen kilpailuetujen arvioinnin jälkeen ehdotetaan optimaalista ratkaisua. Omat haasteensa operaatiomuodon valintaan luovat potentiaalinen mutta haastava kohdemarkkina-alue sekä yrityksen sisäiset tekijät. Kontekstiin parhaiten sopivaksi etabloitumismenetelmäksi esitetään aloittamista välittömällä viennillä asiakkaiden etsimiseksi ja suhteiden luomiseksi. Kun asiakkuuksia alueella on riittävästi, myyntikonttorin perustaminen Pietarin lähelle nähdään tarkoituksenmukaisena paikallisen läsnäolon lisäämiseksi. Empiirinen data kattaa kahdeksan asiantuntijahaastattelua, jotka yhdessä muun lähdeaineiston kanssa rakentavat perustan empiirisille tuloksille. Tutkimuksen tulokset tarjoavat yritykselle perustellun ratkaisuehdotuksen siitä, kuinka Pietarin markkinoille tulisi etabloitua.

Exchange rate volatility and the use of foreign currency derivatives: Impact of 2008 global financial crisis

This thesis examines the impact of foreign exchange rate volatility to the extent of use of foreign currency derivatives. Especially the focus is on the impacts of 2008 global financial crisis. The crisis increased risk level in the capital markets greatly. The change in the currency derivatives use is analyzed by comparing means between different periods and in addition, by linear regression that enables to analyze the explanatory power of the model. The research data consists of financial statements figures from fiscal years 2006-2011 published by firms operating in traditional Finnish industrial sectors. Volatilities of the chosen three currency pairs is calculated from the daily fixing rates of ECB. Based on the volatility the sample period is divided into three sub-periods. The results suggest that increased FX market volatility did not increase the use foreign currency derivatives. Furthermore, the increased foreign exchange rate volatility did not increase the power of linear regression model to estimate the use foreign currency derivatives compared to previous studies.

Value added logistics in supply and demand chain : COSTFIX : New operation model for maintenance material logistics in paper industry

This research report illustrates and examines new operation models for decreasing fixed costs and transforming them into variable costs in the field of paper industry. The report illustrates two cases – a new operation model for material logistics in maintenance and an examination of forklift truck fleet outsourcing solutions. Conventional material logistics in maintenance operation is illustrated and some problems related to conventional operation are identified. A new operation model that solves some of these problems is presented including descriptions of procurement and service contracts and sources of added value. Forklift truck fleet outsourcing solutions are examined by illustrating the responsibilities of a host company and a service provider both before and after outsourcing. The customer buys outsourcing services in order to improve its investment productivity. The mechanism of how these services affect the customer company’s investment productivity is illustrated.