Flows of Bingham Materials Through Ideal Porous Media: an Experimental and Theoretical Study

The flow of Bingham liquids through porous media has been studied. Experiments have been performed to determine the flow rate / pressure drop relationship for the flow of a grease of Binghamian rheological behavior through an array of rods of circular cross section. The yield stress and plastic viscosity of the grease have been determined with the aid of a controlled stress rotational rheometer. To investigate a wider range of the flow parameters, the mass and momentum conservation equations have been solved numerically, in conjunction with the generalized Newtonian constitutive law and the bi-viscosity model. The finite volume method has been employed to obtain the numerical solution. These numerical results also yielded a flow rate / pressure drop relationship, which is in very good agreement with the experimental results. A capillaric theory has been developed to determine an analytical relationship between the flow rate and pressure drop for flows of Bingham liquids through porous media. It is shown that the predictions of this theory are in good agreement with the experimental and numerical results.

Composite artistry in the Book of Numbers : a study in biblical narrative conventions

The present thesis discusses the coherence or lack of coherence in the book of Numbers, with special regard to its narrative features. The fragmented nature of Numbers is a well-known problem in research on the book, affecting how we approach and interpret it, but to date there has not been any thorough investigation of the narrative features of the work and how they might contribute to the coherence or the lack of coherence in the book. The discussion is pursued in light of narrative theory, and especially in connection to three parameters that are typically understood to be invoked in the interpretation of narratives: 1) a narrative paradigm, or ‘story,’ meaning events related to each other temporally, causally, and thematically, in a plot with a beginning, middle, and end; 2) discourse, being the expression plane of a narrative, or the devices that an author has at hand in constructing a narrative; 3) the situation or languagegame of the narrative, prototypical examples being factual reports, which seeks to depict a state of affairs, and storytelling narratives, driven by a demand for tellability. In view of these parameters the present thesis argues that it is reasonable to form four groups to describe the narrative material of Numbers: genuine narratives (e.g. Num 12), independent narrative sequences (e.g. Num 5:1-4), instrumental scenes and situations (e.g. Num 27:1-5), and narrative fragments (e.g. Num 18:1). These groups are mixed throughout with non-narrative materials. Seen together, however, the narrative features of these groups can be understood to create an attenuated narrative sequence from beginning to end in Numbers, where one thing happens after another. This sequence, termed the ‘larger story’ of Numbers, concerns the wandering of Israel from Sinai to Moab. Furthermore, the larger story has a fragmented plot. The end-point is fixed on the promised land, Israel prepares for the wandering towards it (Num 1-10), rebels against wandering and the promise and is sent back into the wilderness (Num 13-14), returns again after forty years (Num 21ff.), and prepares for conquering the land (Num 22-36). Finally, themes of the promised land, generational succession, and obedience-disobedience, operate in this larger story. Purity is also a significant theme in the book, albeit not connected to plot in the larger story. All in all, sequence, plot, and theme in the larger story of Numbers can be understood to bring some coherence to the book. However, neither aspect entirely subsumes the whole book, and the four groups of narrative materials can also be understood to underscore the incoherence of the work in differentiating its variegated narrative contents. Numbers should therefore be described as an anthology of different materials that are loosely connected through its narrative features in the larger story, with the aim of informing Israelite identity by depicting a certain period in the early history of the people.

Unidirectional fiber-reinforced composite as an oral implant abutment material: Experimental studies of E-glass fiber/BisGMA-TEGDMA polymer in vitro

Fiber-reinforced composites (FRCs) are a new group of non-metallic biomaterials showing a growing popularity in many dental and medical applications. As an oral implant material, FRC is biocompatible in bone tissue environment. Soft tissue integration to FRC polymer material is unclear. This series of in vitro studies aimed at evaluating unidirectional E-glass FRC polymer in terms of mechanical, chemical, and biological properties in an attempt to develop a new non-metallic oral implant abutment alternative. Two different types of substrates were investigated: (a) Plain polymer (BisGMA 50%–TEGDMA 50%) and (b) Unidirectional FRC. The mechanical behavior of high fiber-density FRCs was assessed using a three-point bending test. Surface characterization was performed using scanning electron and spinning disk confocal microscopes. The surface wettability/energy was determined using sessile drop method. The blood response, including blood-clotting ability and platelet morphology was evaluated. Human gingival fibroblast cell responses - adhesion kinetics, adhesion strength, and proliferation activity - were studied in cell culture environment using routine test conditions. A novel tissue culture method was developed and used to evaluate porcine gingival tissue graft attachment and growth on the experimental composite implants. The analysis of the mechanical properties showed that there is a direct proportionality in the relationship between E-glass fiber volume fraction and toughness, modulus of elasticity, and load bearing capacity; however, flexural strength did not show significant improvement when high fiber-density FRC is used. FRCs showed moderate hydrophilic properties owing to the presence of exposed glass fibers on the polymer surface. Blood-clotting time was shorter on FRC substrates than on plain polymer. The FRC substrates also showed higher platelet activation state than plain polymer substrates. Fibroblast cell adhesion strength and proliferation rate were highly pronounced on FRCs. A tissue culture study revealed that gingival epithelium and connective tissue established an immediate close contact with both plain polymer and FRC implants. However, FRC seemed to guide epithelial migration outwards from the tissue/implant interface. Due to the anisotropic and hydrophilic nature of FRC, it can be concluded that this material enhances biological events related with soft tissue integration on oral implant surface.

Use of fiber-reinforced composite framework and thermochromic pigment in maxillofacial prostheses

The purpose of this investigation was to evaluate the possibility to enhance certain qualities of facial prostheses. Polymethyl methacrylate is still being used as base mate¬rial or clip carrier material, but it is hard and heavy, and debonding of the silicone from the acrylic base material is a frequent problem. This thesis aims to evaluate the use of fiber-reinforced composite (FRC) as framework material for maxillofacial silicone prostheses. FRC has been used as reinforcement in removable and fixed partial dentures since the 1990s. This material is lightweight and can be fabricated to compress the margins of the prosthesis slightly, to keep it tightly against the skin during jaw movements and facial expressions. Additionally, the use of a thermochromic pigment, colorless in room temperature and red in a cold environment, was studied in order to evaluate the possibility of using this color changing pigment in facial prostheses to mimic the color change of facial skin in cold weather. The tensile bond strength between pre-impregnated, unidirectional FRC and maxillofacial silicone elastomer was studied. Three different bonding agents or primers were compared. Bond strength was improved by one of the primers and by roughening the surface. The effect of a skin compressing glass fiber-reinforced composite framework on facial skin blood flow was studied by using a face mask, constructed with a compression pad corresponding to the outer margin of a glass fiber-reinforced framework beam of a facial prosthesis. The skin blood flow of ten healthy volunteers, aged 23-25 years, was measured during touch, light, and moderate compression of the skin, by using laser Doppler imaging technique. None of the compressions showed any marked effects on local skin blood flow. There were no significant differences between blood flow during compression and at baseline. Maxillofacial silicone elastomer was colored intrinsically with conventional color pigments: a control group containing only conventional pigments was compared to two test groups with 0.2 wt% and 0.6 wt% thermochromic pigment added. The color of the material was measured with a spectrophotometer in room temperature and after storage in a freezer. The color stability of the maxillofacial silicone elastomer colored with thermo¬chromic pigment was evaluated by artificial aging. The color dif¬ference of the L* (lightness) and a* values (redness), comparing color after the samples were stored at room temperature and in a freezer (-19°C), was statistically significant for both 0.2 wt% and 0.6 wt% thermo¬chromic pigment groups. The differences in the b* values (yellowness) were statistically significant for the 0.6 wt% group. Exposure to ultraviolet (UV) radiation led to visually noticeable and statistically signifi¬cant color changes (ΔE) in all color values in both test groups. The specimens containing thermochromic pigment were very sensitive to UV radiation. In conclusion, a framework of fiber-reinforced composite can successfully be bonded to maxillofacial silicone elastomer, and a framework beam, compressing the facial skin, did not remarkably alter the skin blood flow on healthy, young adults. The thermochromic pigment showed color change in maxillofacial silicone elastomer. However, artificial aging showed that it was too sensitive to UV radiation to be used, as such, in maxillofacial prostheses.

Next Media / eReading / Kirjastolisenssipilotti

Arja Tuuliniemen esitys Asiantuntijaseminaarissa Helsingissä 13.2.2014.

Social media and public libraries : exploring information activities of library professionals and users

Social media has become a part of many people’s everyday lives. In the library field the adoption of social media has been widespread and discussions of the development of “Library 2.0” began at an early stage. The aim with this thesis is to study the interface between public libraries, social media, and users, focusing on information activities. The main research question is: How is the interface between public libraries and social media perceived and acted upon by its main stakeholders (library professionals and users)? The background of Library 2.0 is strongly associated with the development of the Web and social media, as well as with the public libraries and their user-centered and information technological development. The theoretical framework builds on the research within the area of Library and Information Science concerning information behavior, information practice, and information activities. Earlier research on social media and public libraries is also highlighted in this thesis. The methods survey and content analysis were applied to map the interface between social media and public libraries. A questionnaire was handed out to the users and another questionnaire was sent out to the library professionals. The results were statistically analyzed. In the content analysis public library Facebook pages were studied. All the empirical investigations were conducted in the area of Finland Proper. An integrated analysis of the results deepens the understanding of the key elements of the social media and public library context. These elements are interactivity, information activities, perceptions, and stakeholders. In this context seven information activities were distinguished: reading, seeking, creating, communicating, informing, mediating, and contributing. This thesis contributes to develop the research concerning information activities and draws a realistic picture of the challenges and opportunities in the social media and public library context. It also contributes with knowledge on library professionals and library users, and the existing differences in their perceptions of the interface between libraries and social media.

Backpacker 2.0 - Contemporary backpackers and their use of social media as an information and communication platform

Long-term independent budget travel to countries far away has become increasingly common over the last few decades, and backpacking has now entered the tourism mainstream. Nowadays, backpackers are a very important segment of the global travel market. Backpacking is a type of tourism that involves a lot of information search activities. The Internet has become a major source of information as well as a platform for tourism business transactions. It allows travelers to gain information very effortlessly and to learn about tourist destinations and products directly from other travelers in the form of electronic word-of-mouth (eWOM). Social media has penetrated and changed the backpacker market, as now modern travelers can stay connected to people at home, read online recommendations, and organize and book their trips very independently. In order to create a wider understanding on modern-day backpackers and their information search and share behavior in the Web 2.0 era, this thesis examined contemporary backpackers and their use of social media as an information and communication platform. In order to achieve this goal, three sub-objectives were identified: 1. to describe contemporary backpacker tourism 2. to examine contemporary backpackers’ travel information search and share behavior 3. to explore the impacts of new information and communications technologies and Web 2.0 on backpacker tourism The empirical data was gathered with an online survey, thus the method of analysis was mainly quantitative, and a qualitative method was used for a brief analysis of open questions. The research included both descriptive and analytical approaches, as the goal was to describe modern-day backpackers, and to examine possible interdependencies between information search and share behavior and background variables. The interdependencies were tested for statistical significance with the help of five research hypotheses. The results suggested that backpackers no longer fall under the original backpacker definitions described some decades ago. Now, they are mainly short-term travelers, whose trips resemble more those of mainstream tourists. They use communication technologies very actively, and particularly social media. Traditional information sources, mainly guide books and recommendations from friends, are of great importance to them but also eWOM sources are widely used in travel decision making. The use of each source varies according to the stage of the trip. All in all, Web 2.0 and new ICTs have transformed the backpacker tourism industry in many ways. Although the experience has become less authentic in some travelers’ eyes, the backpacker culture is still recognizable.

Jaetun johtajuuden ja työhyvinvoinnin välinen yhteys: tutkimus media-alan henkilöstön kokemuksista.

Työhyvinvointi työpaikoilla on Työterveyslaitoksen vuonna 2008 tekemän tutkimuksen mukaan heikentynyt ja tästä kertyvät kustannukset yhteiskunnalle ovat 24 miljardin euron vuodessa. Yritykset ovat pyrkineet vastaamaan tähän haasteeseen muun muassa jaetun johtajuuden keinoin ja panostamalla työntekijöiden työhyvinvointiin. Koska tästä työhyvinvoinnin laskusta koituvat kustannukset heikentävät yritysten kannattavuutta, on tätä asiaa syytä tutkia tarkemmin. Tämän tutkimuksen tarkoituksena on selvittää jaetun johtajuuden ja työhyvinvoinnin välistä yhteyttä pelialan ja TV-tuotantoyrityksissä. Lisäksi pyritään löytämään uusia työhyvinvointia ja jaettua johtajuutta linkittäviä tekijöitä. Tutkimus tehtiin laadullisena tutkimuksena haastattelemalla pelialalla ja TV-tuotantoyrityksissä työskenteleviä ihmisiä, heidän kokemuksiaan työhyvinvoinnista ja jaetusta johtajuudesta. Aiemmista työhyvinvoinnin tutkimuksista nostettiin esille neljä tutkijaa, joiden johtopäätökset olivat ydinviestiltään hyvin yhteneväisiä. Jaetun johtajuuden merkitys aiemman tutkimuksen valossa tiivistyi yksilön huomioonottamiseen ja hänen vahvuuksiensa hyödyntämiseen. Verrattaessa työhyvinvoinnin ja jaetun johtajuuden tutkimusten tuloksia, havaittiin niillä olevan useita yhteisiä tekijöitä. Haastatteluaineistoa lähestyttiin analyysissä induktiivisesti grounded teorian pohjalta koodaamalla ja luokittelemalla haastatteluaineistoa yläkategorioiksi, tiettyä asiakokonaisuutta koskeviksi kuvauksiksi. Näiden yläkategorioiden välisistä sidoksista muodostetusta käsitekartasta etsittiin selittäviä sidoksia jaetun johtajuuden ja työhyvinvoinnin välisille yhteyksille. Merkittävimpinä yläkategorioina käsitekartasta olivat liiketoiminta, motivaatio ja ihmissuhteet. Näissä kiteytyvät jaetun johtajuuden ja työhyvinvoinnin välisen yhteyden ydinsanoma; menestyvä liiketoiminta tarvitsee motivoituneen henkilöstön, jonka ihmissuhteet ovat hyvässä kunnossa. Uutena tekijänä tutkimuksessa löydettiin organisaation sisäisen ja ulkoisen vapauden positiivinen vaikutus jaetulle johtajuudelle ja työhyvinvoinnille. Johtopäätöksenä tutkimuksesta saatiin johtamisen ja työhyvinvoinnin positiivinen sykli, jossa sosiaalisessa prosessissa yrityksen työntekijöiden luomat arvot ohjaavat niitä tavoitteita, joihin yritys pyrkii. Tämä motivoi työntekijöitä toteuttamaan näitä tavoitteita sekä kehittämään itseään ja ihmissuhteitaan. Työntekijöiden osallistuminen sosiaaliseen prosessiin sitoutuneisuutta heitä yrityksen liiketoimintaprosessiin. Liiketoimintaprosessista saatava palaute muokkaa edelleen yrityksen arvoja ja näin sykli käynnistyy uudelleen. Vapaus oli haastatelluissa yrityksissä tyypillinen uusi välittävä tekijä jaetun johtajuuden ja työhyvinvoinnin välillä.

Design and validation of stateful composite RESTful web services

A web service is a software system that provides a machine-processable interface to the other machines over the network using different Internet protocols. They are being increasingly used in the industry in order to automate different tasks and offer services to a wider audience. The REST architectural style aims at producing scalable and extensible web services using technologies that play well with the existing tools and infrastructure of the web. It provides a uniform set of operation that can be used to invoke a CRUD interface (create, retrieve, update and delete) of a web service. The stateless behavior of the service interface requires that every request to a resource is independent of the previous ones facilitating scalability. Automated systems, e.g., hotel reservation systems, provide advanced scenarios for stateful services that require a certain sequence of requests that must be followed in order to fulfill the service goals. Designing and developing such services for advanced scenarios with REST constraints require rigorous approaches that are capable of creating web services that can be trusted for their behavior. Systems that can be trusted for their behavior can be termed as dependable systems. This thesis presents an integrated design, analysis and validation approach that facilitates the service developer to create dependable and stateful REST web services. The main contribution of this thesis is that we provide a novel model-driven methodology to design behavioral REST web service interfaces and their compositions. The behavioral interfaces provide information on what methods can be invoked on a service and the pre- and post-conditions of these methods. The methodology uses Unified Modeling Language (UML), as the modeling language, which has a wide user base and has mature tools that are continuously evolving. We have used UML class diagram and UML state machine diagram with additional design constraints to provide resource and behavioral models, respectively, for designing REST web service interfaces. These service design models serve as a specification document and the information presented in them have manifold applications. The service design models also contain information about the time and domain requirements of the service that can help in requirement traceability which is an important part of our approach. Requirement traceability helps in capturing faults in the design models and other elements of software development environment by tracing back and forth the unfulfilled requirements of the service. The information about service actors is also included in the design models which is required for authenticating the service requests by authorized actors since not all types of users have access to all the resources. In addition, following our design approach, the service developer can ensure that the designed web service interfaces will be REST compliant. The second contribution of this thesis is consistency analysis of the behavioral REST interfaces. To overcome the inconsistency problem and design errors in our service models, we have used semantic technologies. The REST interfaces are represented in web ontology language, OWL2, that can be part of the semantic web. These interfaces are used with OWL 2 reasoners to check unsatisfiable concepts which result in implementations that fail. This work is fully automated thanks to the implemented translation tool and the existing OWL 2 reasoners. The third contribution of this thesis is the verification and validation of REST web services. We have used model checking techniques with UPPAAL model checker for this purpose. The timed automata of UML based service design models are generated with our transformation tool that are verified for their basic characteristics like deadlock freedom, liveness, reachability and safety. The implementation of a web service is tested using a black-box testing approach. Test cases are generated from the UPPAAL timed automata and using the online testing tool, UPPAAL TRON, the service implementation is validated at runtime against its specifications. Requirement traceability is also addressed in our validation approach with which we can see what service goals are met and trace back the unfulfilled service goals to detect the faults in the design models. A final contribution of the thesis is an implementation of behavioral REST interfaces and service monitors from the service design models. The partial code generation tool creates code skeletons of REST web services with method pre and post-conditions. The preconditions of methods constrain the user to invoke the stateful REST service under the right conditions and the post condition constraint the service developer to implement the right functionality. The details of the methods can be manually inserted by the developer as required. We do not target complete automation because we focus only on the interface aspects of the web service. The applicability of the approach is demonstrated with a pedagogical example of a hotel room booking service and a relatively complex worked example of holiday booking service taken from the industrial context. The former example presents a simple explanation of the approach and the later worked example shows how stateful and timed web services offering complex scenarios and involving other web services can be constructed using our approach.

Re-shaping the Resourcing: Recruitment in Social Media

Social media is very current topic in today’s society and organisations. In the times of economic challenges, companies are looking for efficient ways to resource workforce. In addition, there is competition of competent workforce in employment markets. Employer image plays important role in recruitment as people seek to organisations they find interesting and have a reputation as a good employer. This study concerns the discussion on utilising social media in recruitment and employer image in a corporate enterprise. I will find solutions how to utilize social media in recruitment, in which channels and methods that can be done and what these actions require from a company doing social recruitment. I bring up the discussion and challenges that relate to starting to take social media into use in an organization overall and in recruitment. The qualitative material has been gathered with interviews of eighteen persons and the material available about the topic in the enterprise intranet. According to the study, social media is seen both as an opportunity to reach large amount of people quickly and cost-efficiently, but then again it brings news aspects for controlling the employer image and communication towards the audience. Taking social media into use as part of recruiters and managers daily work requires both finding the right channels and attention to the internal communication culture and resourcing. Social recruitment requires a strategy and a proper plan to be able to work in a company. There are several social media channels that enable to reach people, but they don’t do the social recruitment alone.

Avalon Media System project update: a Hydra solution for digital audio and video access

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014