Utilização de resíduos de catalisador (ECAT) e cinzas da casca de arroz (CCA) na elaboração de vidros silicatos soda-cal destinados a embalagem

Dissertação (Mestrado em Tecnologia Nuclear)

Síntese e impregnação de peneiras moleculares Fe MCM-41 derivada de sílica da casca do arroz

The mesoporous molecular sieves of the MCM-41 and FeMCM-41 type are considered promissory as support for metals used as catalysts in oil-based materials refine processes and as adsorbents for environmental protection proposes. In this work MCM-41 and FeMCM41 were synthesized using rice husk ash - RHA as alternative to the conventional silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced by two routes: introduction of iron salt direct synthesis; and a modification post synthesis consisting in iron salt 1 % and 5% impregnation in the material followed by thermal decomposition. The molecular sieves were characterized by X ray diffraction XRD, Fourier transform infrared spectroscopy FT-IR, X ray fluorescence spectroscopy XFR, scanning electronic microscopy SEM, specific surface area using the BET method, Termogravimetry TG. The kinetic model of Flynn Wall was used with the aim of determining the apparent activation energy of the surfactant remove (CTMABr) in the MCM- 41 porous. The analysis made possible the morphology characterization, identifying the presence of hexagonal structure typical for mesoporous materials, as well as observation of the MCM41 and iron of characteristic bands.

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Emissão de metano em arroz irrigado em Santa Catarina.

2009

Reginalização das temperaturas mínimas do ar prejudiciais à fecundação das flores de arroz para a região climática da depressão central, RS.

2000

Impacto do aumento da concentração de CO2 do ar sobre a Brusone do arroz.

2009

Efeito do aumento da concentração de CO2 atmosférico sobre a Brusone do arroz.

2009

¿Y del consumidor qué? : la vida es algo más que hacer arroz con pollo

Fondo Margaritainés Restrepo

Alterações na Germinação e Vigor de Sementes de Arroz da Cultivar BRS Pampa Tratadas com Indutores de Crescimento.

2016

BRS PAMPEIRA: Cultivar de Arroz Irrigado de Elevado Potencial Produtivo.

2016

Variabilidade de nodulação em genótipos de feijoeiro comum do banco germoplasma da Embrapa Arroz e Feijão.

O objetivo deste trabalho foi avaliar a diversidade genotípica da capacidade de nodulação em materiais presentes em duas coleções nucleares do banco de germoplasma da Embrapa Arroz e Feijão.

LavTec: lavoura de arroz irrigado com aplicação de alta tecnologia na Baixada Maranhense.

2015

ARROZ vermelho: cultivar BRS 901.

Origem; Melhoramento genético; Informações técnicas; Características agronômicas; Resistência às doenças; Recomendações técnicas; Manejo recomendado; Região indicada; Comparativo de produtividade; Um alimento especial.

Emissões de gases de efeito estufa em área de produção de arroz em função do manejo do solo e da cobertura vegetal.

2015

Dependência espacial dos atributos químicos do solo em um agroecossistema de arroz irrigado.

2015