Lactic Acid Bacteria Antimicrobial Compounds: Characteristics and Applications

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Optimization of polysaccharides production by bacteria isolated from soil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Airborne-Particle Abrasion and Mechanico-Thermal Cycling on the Flexural Strength of Glass Ceramic Fused to Gold or Cobalt-Chromium Alloy

Purpose: To evaluate the effect of airborne-particle abrasion and mechanico-thermal cycling on the flexural strength of a ceramic fused to cobalt-chromium alloy or gold alloy.Materials and Methods: Metallic bars (n = 120) were made (25 mm x 3 mm x 0.5 mm): 60 with gold alloy and 60 with Co-Cr. At the central area of the bars (8 mm x 3 mm), a layer of opaque ceramic and then two layers of glass ceramic (Vita VM13, Vita Zahnfabrick) were fired onto it (thickness: 1 mm). Ten specimens from each alloy group were randomly allocated to a surface treatment [(tungsten bur or air-particle abrasion (APA) with Al(2)O(3) at 10 mm or 20 mm away)] and mechanico-thermal cycling (no cycling or mechanically loaded 20,000 cycles; 10 N distilled water at 37 degrees C and then thermocycled 3000 cycles; 5 degrees C to 55 degrees C, dwell time 30 seconds) combination. Those specimens that did not undergo mechanico-thermal cyclingwere stored inwater (37 degrees C) for 24 hours. Bond strength was measured using a three-point bend test, according to ISO 9693. After the flexural strength test, failure types were noted. The data were analyzed using three factor-ANOVA and Tukey's test (alpha = 0.05).Results: There were no significant differences between the flexural bond strength of gold and Co-Cr groups (42.64 +/- 8.25 and 43.39 +/- 10.89 MPa, respectively). APA 10 and 20 mm away surface treatment (45.86 +/- 9.31 and 46.38 +/- 8.89 MPa, respectively) had similar mean flexural strength values, and both had significantly higher bond strength than tungsten bur treatment (36.81 +/- 7.60 MPa). Mechanico-thermal cycling decreased the mean flexural strength values significantly for all six alloy-surface treatment combinations tested when compared to the control groups. The failure type was adhesive in the metal/ceramic interface for specimens surface treated only with the tungsten bur, and mixed for specimens surface treated with APA 10 and 20 mm.Conclusions: Considering the levels adopted in this study, the alloy did not affect the bond strength; APA with Al(2)O(3) at 10 and 20 mm improved the flexural bond strength between ceramics and alloys used, and the mechanico-thermal cycling of metal-ceramic specimens resulted in a decrease of bond strength.

Bacteriocin-like substances production by Streptococcus-salivarius against oral bacteria

Samples of tongue and bucal mucosa surfaces were obtained from six healthy subjects with the purpose of isolating S. salivarius. It was verified that 47 out of 48 S. salivarius strains produced bacteriocin-like substances against at least one of the indicator species: Actinomyces viscosus, Rothia dentocariosa, Streptococcus pyogenes, Staphylococcus aureus, Streptococcus mutans and Streptococcus sanguis. The method employed to test for bacteriocin production was that of deferred antagonism. The results showed that there was a high antagonism against R. dentocariosa, S. pyogenes and A. viscosus; extremely low against S. mutans and S. sanguis and no inhibition for S. aureus.

Comparative genomic analysis of plant-associated bacteria

This review deals with a comparative analysis of seven genome sequences from plant-associated bacteria. These are the genomes of Agrobacterium tumefaciens, Mesorhizobium loti, Sinorhizobium meliloti, Xanthomonas campestris pv campestris, Xanthomonas axonopodis pv citri, Xylella fastidiosa, and Ralstonia solanacearum. Genome structure and the metabolism pathways available highlight the compromise between the genome size and lifestyle. Despite the recognized importance of the type III secretion system in controlling host compatibility, its presence is not universal in all necrogenic pathogens. Hemolysins, hemagglutinins, and some adhesins, previously reported only for mammalian pathogens, are present in most organisms discussed. Different numbers and combinations of cell wall degrading enzymes and genes to overcome the oxidative burst generally induced by the plant host are characterized in these genomes. A total of 19 genes not involved in housekeeping functions were found common to all these bacteria.

Effect of 3,4,4 '-trichlorocarbanilide on growth of lactic acid bacteria contaminants in alcoholic fermentation

3,4,4'-trichlorocarbanilide (TCC) was rested as a new method of bacterial growth control for S. cerevisiae alcoholic fermentations of diluted high test molasses (HTM). Minimal inhibitory concentration (MIC) was tested to determine the necessary concentration of TCC to control bacterial growth. The fed-batch alcoholic fermentation process was used with cell recycle similar to industrial conditions and Lactobacillus fermentum CCT 1407 was mixed in the first inoculum to grow with the yeast. Yeast extract was added into the must to stimulate bacterial growth. The best results of TCC's MIC to bacterial growth of Lactobacillus fermentum and Leuconostoc mesenteroides (< 0.125-1.0 mu g/ml) and Saccharomyces cerevisiae (16 mu g/ml) occurred when it was combined with sodium dodecylsulphate (SDS) in a 1: 4 TCC/SDS ratio (wt/wt) in distilled water solution. 1.8 g/l TCC entrapped in calcium alginate added to the must with yeast extract inhibited the growth of Lactobacillus fermentum CCT 1407 maintaining a controlled acidity, higher yeast viability and up to 20.8% of improvement in the average of alcoholic efficiency. Addition of 0.075 g/l TCC entrapped in calcium alginate and 1.67 mg/l SDS in the wort with yeast extract (0-5.0 g/l), inhibited and controlled the extensive bacterial contamination for 19 cycles of fermentation. (C) 1998 Published by Elsevier B.V. Ltd.

Charqui meats as fermented meat products: role of bacteria for some sensorial properties development

Jerked beef, a derivative of charqui meat, is a cured, salted and dried meat product. The presence of halotolerant bacteria, where Staphylococcus spp. (84.2%) were the predominant species, would act eventually as starter cultures and was followed throughout processing. Jerked beef prepared separately with exogenous S. carnosus and S. xylosus as starter cultures resulted in high proteolysis. Samples prepared with S. xylosus had the highest proteolysis and were preferred by the sensory panel. This research has suggested that jerked beef (and thus charqui meat) prepared under these conditions is a fermented meat product. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Identification of bacteria in endodontic infections by sequence analysis of 16S rDNA clone libraries

A significant proportion of oral bacteria are unable to undergo cultivation by existing techniques. In this regard, the microbiota from root canals still requires complementary characterization. The present study aimed at the identification of bacteria by sequence analysis of 16S rDNA clone libraries from seven endodontically infected teeth. Samples were collected from the root canals, subjected to the PCR with universal 16S rDNA primers, cloned and partially sequenced. Clones were clustered into groups of closely related sequences (phylotypes) and identification to the species level was performed by comparative analysis with the GenBank, EMBL and DDBJ databases, according to a 98 % minimum identity. All samples were positive for bacteria and the number of phylotypes detected per subject varied from two to 14. The majority of taxa (65(.)2 %) belonged to the phylum Firmicutes of the Gram-positive bacteria, followed by Proteobacteria (10(.)9 %), Spirochaetes (4(.)3 %), Bacteroidetes (6(.)5 %), Actinobacteria (2(.)2 %) and Deferribacteres (2(.)2 %). A total of 46 distinct taxonomic units was identified. Four clones with low similarity to sequences previously deposited in the databases were sequenced to nearly full extent and were classified taxonomically as novel representatives of the order Clostridiales, including a putative novel species of Mogibacterium. The identification of novel phylotypes associated with endodontic infections suggests that the endodontium may still harbour a relevant proportion of uncharacterized taxa.

PATHOGENIC OR POTENTIALLY PATHOGENIC BACTERIA AS CONTAMINANTS OF FRESH-WATER FROM DIFFERENT SOURCES IN ARARAQUARA, BRAZIL

The microbiological quality of various fresh waters in the Araraquara region, state of São Paulo, Brazil was investigated. Ninety-nine water samples were taken from rivers, reservoirs, artesian and non-artesian wells, springs and tap waters, and these waters were analysed using: plate counts of heterotrophic microorganisms (per 1 ml); Most Probable Number (MPN) of fecal coliforms and E. coli (per 100 ml); tests for presence of Salmonella, Shigella, Yersinia, the E. coli pathogens of classes EPEC, ETEC and EIEC and Mycobacterium, Shigella, Yersinia and enteroinvasive E. coli (EIEC) were not isolated. The other types of microorganisms were isolated in varying proportions. We conclude that the waters investigated represent a potential microbiological health risk.

STUDY OF AMNONIFYING BACTERIA BEHAVIOR IN THE LAKES CARIOCA AND D-HELVECIO (RIO-DOCE-VALLEY-MG)

The study of the amnonifying bacteria behavior in the lakes Carioca and D. Helvecio, which belong to the natural lacustrine system of the Rio Doce Valley - Minas Gerais - Brazil, during the period from March to November, showed a similar seasonal variation in both lakes, with higher population density in March and November (raining period) and lower density in May, July and September (dry period). The vertical variation was also relatively similar for both lakes, were during the thermal stratification the distribution was regular along the water column, while during the period of thermal stratification the populational density was remarkably different at different depths. The characterized ammonifying types to the genera Acinetobacter, Moraxella and Proteus, which in culture reveal high amnonifying activity with values which have reached 30,8 mug/l of ammonia per population unity (105 bacteria/ml).

The influence of fermentation time and the presence of salts in the rheology of the fermentation broth of a polysaccharide-producing bacteria free of soil

Rheological studies were carried out in the fermentation broth of a polysaccharide-producing microorganism free of soil. This microorganism was designated 4B. The bacteria 4B was inoculated in the fermentation broth, which consisted of a carbon source and mineral salts, and it was incubated in a rotating agitator at 30 degreesC for 72 h at 210 rpm. A rheometer of concentric cylinders equipped with a thermostatic bath was used and the readings were taken at 25 degreesC. A study was made of the influence of the fermentation time and the readings were made after 24, 48 and 72 h of incubation, using, separately, sucrose and glucose as carbon sources. The influence of the salt concentrations was determined in each carbon source; the salts used were NaCl, KCl and CaCl2 in the concentrations of 0.4%, 1.0%, 2.0% and 3.0%. It was observed that the fermentation broth behaves as a non-Newtonian fluid and it presents pseudoplastic behaviour. Calculations were made of the flow behaviour index (n) and the consistency index (k) of the samples after 24, 48 and 72 h of fermentation, and it was observed that the 72 h sample presented higher k and consequently higher apparent viscosity. of the carbon sources used, the sucrose presented higher viscous broths after 24 and 48 h, and the glucose after 72 h of fermentation. With relation to the effect of the addition of salts, the CaCl2 presented a higher influence on the viscosity of the fermentation broths. (C) 2001 Elsevier B.V. Ltd. All rights reserved.