Influence of compliance to respiratory weaning consensus conference criteria on respiratory outcome within 48h after planned extubation

INTRODUCTION. A two-step assessment (readiness to wean (RW) followed by spontaneousbreathing trial (SBT)) of predefined criteria is recommended before planned extubation(PE)1.OBJECTIVES. We aimed to evaluate if compliance to all guideline criteria was associatedwith better respiratory outcome within 48 h after PE.METHODS. The data (extracted from our clinical information system) of 458 consecutivepatients who underwent PE after C48 h of invasive ventilation in our medico-surgical ICUwere analyzed. We evaluated compliance with guidelines [1] regarding respiratory rate, tidalvolume, PaO2, FiO2, PEEP, PaCO2, pH, heart rate, systolic arterial pressure and arrhythmiaduringRWand SBT assessment (RW and SBT within 2 h). A patient was classified as RW+ ifallRWcriteria were fulfilled andRW-if at least 1 criterion was violated. The same approachwas used to define SBT+ and SBT- patients. During the 48 h following PE, we assessed theoccurrence of post-PE respiratory failure (PRF) (defined as the presence of at least 1 consensuscriterion of respiratory failure [1]), reintubation (after NIV failure or because of immediateintubation criteria) and cumulative duration of post-PE ventilation (PPEV = Post-PE invasive+ non-invasive ventilation). ICU mortality was recorded. Comparisons for variousoutcomes were performed by Chi-square and t tests.RESULTS. All consensus criteria were fulfilled in 77.3% of the patients during RW and in68.1% of the patients during SBT.[Compliance to weaning criteria and outcome]N = 458 PRF (%) Reintubation (%) PPEV (min) ICU mortality (%)All patients 53.5 10.0 542 ± 664 6.1RW+ 50.0 9.3 490 ± 626 5.4RW- 65.4* 12.5 718 ± 757** 8.7SBT+ 52.6 8.0 498 ± 594 6.7SBT- 55.5 14.4*** 637 ± 788**** 4.8Occurrence of PRF only was not associated with increased ICU mortality: 4.2 versus 7.8%,p = 0.11. By contrast, ICU mortality was significantly increased in patients requiring reintubation:21.7 versus 4.4%. p\0.001; * p = 0.006 RW+ versus RW-; ** p = 0.003RW+ versus RW-; *** p = 0.035 SBT+ versus SBT-; **** p = 0.030 SBT+ versusSBTCONCLUSIONS.In our ICU, compliance to all criteria of the two-step published approach ofrespiratory weaning was not optimal but reintubation rate was comparable to published data.Compliance with consensus conference guidelines was associated with lower reintubation rateand shorter PPEV but not with ICU mortality. As mortality was increased by reintubation,more sensitive and specific criteria to predict the risk of reintubation are probably needed.REFERENCE. Boles JM, et al. Eur Respir J 2007;29:1033-56.

Evaluation of Rumble Stripes on Low-Volume Rural Roads in Iowa—Phase II Final Report, November 2011

Single-vehicle run-off-road crashes are the most common crash type on rural two-lane Iowa roads. Rumble strips have proven effective in mitigating these crashes, but the strips are commonly installed in paved shoulders on higher-volume roads that are owned by the State of Iowa. Lower-volume paved rural roads owned by local agencies do not commonly feature paved shoulders but frequently experience run-off-road crashes. This project involved installing rumble stripes, which are a combination of conventional rumble strips with a painted edge line placed on the surface of the milled area, along the edge of the travel lanes, but at a narrow width to avoid possible intrusion into the normal vehicle travel paths. The research described in this report was part of a project funded by the Federal Highway Administration, Iowa Highway Research Board, and Iowa Department of Transportation to evaluate the effectiveness of edge-line rumble strips in Iowa. The project evaluated the effectiveness of rumble stripes in reducing run-off-road crashes and in improving the longevity and wet-weather visibility of edge-line markings. This project consisted of two phases. The first phase was to select pilot study locations, select a set of test sites, install rumble stripes, summarize lessons learned during installation, and provide a preliminary assessment of the rumble stripes’ performance. The purpose of this report was to document results from Phase II. A before and after crash analysis was conducted to assess whether use of the treatment had resulted in fewer crashes. However, due to low sample size, results of the analysis were inconclusive. Lateral position was also evaluated before and after installation of the treatment to determine whether vehicles engaged in better lane keeping. Pavement marking wear was also assessed.

A comment on the cost of capital for investments with non-homogeneous components

In this paper, the expression for the cost of capital is derived when net and replacement investments exhibit differences in their effective prices due to a different fiscal treatment. It is shown that, contrary to previous results in the literature, the cost of capital should be constructed under an opportunity cost criterion rather than a historical one. This result has some important economic consequences, since the optimizing firm will take into account not only the effective price for the new investments but also consider the opportunity cost of replacing them.

A theoretical and practical study on linear reforms of dual taxes

[cat] En aquest treball extenem les reformes lineals introduïdes per Pfähler (1984) al cas d’impostos duals. Estudiem l’efecte relatiu que els retalls lineals duals d’un impost dual tenen sobre la distribució de la desigualtat -es pot fer un estudi simètric per al cas d’augments d’impostos-. Tambe introduïm mesures del grau de progressivitat d’impostos duals i mostrem que estan connectades amb el criteri de dominació de Lorenz. Addicionalment, estudiem l’elasticitat de la càrrega fiscal de cadascuna de les reformes proposades. Finalment, gràcies a un model de microsimulació i una gran base de dades que conté informació sobre l’IRPF espanyol de l’any 2004, 1) comparem l’efecte que diferents reformes tindrien sobre l’impost dual espanyol i 2) estudiem quina redistribució de la riquesa va suposar la reforma dual de l’IRPF (Llei ’35/2006’) respecte l’anterior impost.

International periodic fever, aphthous stomatitis, pharyngitis, cervical adenitis syndrome cohort: description of distinct phenotypes in 301 patients.

OBJECTIVES: The aims of this study were to describe the clinical features of periodic fever, aphthous stomatitis, pharyngitis and cervical adenitis (PFAPA) and identify distinct phenotypes in a large cohort of patients from different countries. METHODS: We established a web-based multicentre cohort through an international collaboration within the periodic fevers working party of the Pediatric Rheumatology European Society (PReS). The inclusion criterion was a diagnosis of PFAPA given by an experienced paediatric rheumatologist participating in an international working group on periodic fever syndromes. RESULTS: Of the 301 patients included from the 15 centres, 271 had pharyngitis, 236 cervical adenitis, 171 oral aphthosis and 132 with all three clinical features. A total of 228 patients presented with additional symptoms (131 gastrointestinal symptoms, 86 arthralgias and/or myalgias, 36 skin rashes, 8 neurological symptoms). Thirty-one patients had disease onset after 5 years and they reported more additional symptoms. A positive family history for recurrent fever or recurrent tonsillitis was found in 81 patients (26.9%). Genetic testing for monogenic periodic fever syndromes was performed on 111 patients, who reported fewer occurrences of oral aphthosis or additional symptoms. Twenty-four patients reported symptoms (oral aphthosis and malaise) outside the flares. The CRP was >50 mg/l in the majority (131/190) of the patients tested during the fever. CONCLUSION: We describe the largest cohort of PFAPA patients presented so far. We confirm that PFAPA may present with varied clinical manifestations and we show the limitations of the commonly used diagnostic criteria. Based on detailed analysis of this cohort, a consensus definition of PFAPA with better-defined criteria should be proposed.

Estimating biophysical variable dependences with kernels

This paper introduces a nonlinear measure of dependence between random variables in the context of remote sensing data analysis. The Hilbert-Schmidt Independence Criterion (HSIC) is a kernel method for evaluating statistical dependence. HSIC is based on computing the Hilbert-Schmidt norm of the cross-covariance operator of mapped samples in the corresponding Hilbert spaces. The HSIC empirical estimator is very easy to compute and has good theoretical and practical properties. We exploit the capabilities of HSIC to explain nonlinear dependences in two remote sensing problems: temperature estimation and chlorophyll concentration prediction from spectra. Results show that, when the relationship between random variables is nonlinear or when few data are available, the HSIC criterion outperforms other standard methods, such as the linear correlation or mutual information.

Benchmarking therapeutic drug monitoring software: A systematic evaluation of available computer tools

Introduction: Therapeutic drug monitoring (TDM) aims at optimizing treatment by individualizing dosage regimen based on measurement of blood concentrations. Maintaining concentrations within a target range requires pharmacokinetic and clinical capabilities. Bayesian calculation represents a gold standard in TDM approach but requires computing assistance. In the last decades computer programs have been developed to assist clinicians in this assignment. The aim of this benchmarking was to assess and compare computer tools designed to support TDM clinical activities.¦Method: Literature and Internet search was performed to identify software. All programs were tested on common personal computer. Each program was scored against a standardized grid covering pharmacokinetic relevance, user-friendliness, computing aspects, interfacing, and storage. A weighting factor was applied to each criterion of the grid to consider its relative importance. To assess the robustness of the software, six representative clinical vignettes were also processed through all of them.¦Results: 12 software tools were identified, tested and ranked. It represents a comprehensive review of the available software's characteristics. Numbers of drugs handled vary widely and 8 programs offer the ability to the user to add its own drug model. 10 computer programs are able to compute Bayesian dosage adaptation based on a blood concentration (a posteriori adjustment) while 9 are also able to suggest a priori dosage regimen (prior to any blood concentration measurement), based on individual patient covariates, such as age, gender, weight. Among those applying Bayesian analysis, one uses the non-parametric approach. The top 2 software emerging from this benchmark are MwPharm and TCIWorks. Other programs evaluated have also a good potential but are less sophisticated (e.g. in terms of storage or report generation) or less user-friendly.¦Conclusion: Whereas 2 integrated programs are at the top of the ranked listed, such complex tools would possibly not fit all institutions, and each software tool must be regarded with respect to individual needs of hospitals or clinicians. Interest in computing tool to support therapeutic monitoring is still growing. Although developers put efforts into it the last years, there is still room for improvement, especially in terms of institutional information system interfacing, user-friendliness, capacity of data storage and report generation.

Benchmarking therapeutic drug monitoring software: A systematic evaluation of available computer tools

Objectives: Therapeutic drug monitoring (TDM) aims at optimizing treatment by individualizing dosage regimen based on blood concentrations measurement. Maintaining concentrations within a target range requires pharmacokinetic (PK) and clinical capabilities. Bayesian calculation represents a gold standard in TDM approach but requires computing assistance. The aim of this benchmarking was to assess and compare computer tools designed to support TDM clinical activities.¦Methods: Literature and Internet were searched to identify software. Each program was scored against a standardized grid covering pharmacokinetic relevance, user-friendliness, computing aspects, interfacing, and storage. A weighting factor was applied to each criterion of the grid to consider its relative importance. To assess the robustness of the software, six representative clinical vignettes were also processed through all of them.¦Results: 12 software tools were identified, tested and ranked. It represents a comprehensive review of the available software characteristics. Numbers of drugs handled vary from 2 to more than 180, and integration of different population types is available for some programs. Nevertheless, 8 programs offer the ability to add new drug models based on population PK data. 10 computer tools incorporate Bayesian computation to predict dosage regimen (individual parameters are calculated based on population PK models). All of them are able to compute Bayesian a posteriori dosage adaptation based on a blood concentration while 9 are also able to suggest a priori dosage regimen, only based on individual patient covariates. Among those applying Bayesian analysis, MM-USC*PACK uses a non-parametric approach. The top 2 programs emerging from this benchmark are MwPharm and TCIWorks. Others programs evaluated have also a good potential but are less sophisticated or less user-friendly.¦Conclusions: Whereas 2 software packages are ranked at the top of the list, such complex tools would possibly not fit all institutions, and each program must be regarded with respect to individual needs of hospitals or clinicians. Programs should be easy and fast for routine activities, including for non-experienced users. Although interest in TDM tools is growing and efforts were put into it in the last years, there is still room for improvement, especially in terms of institutional information system interfacing, user-friendliness, capability of data storage and automated report generation.

Memòria del projecte: Trajectòries d'èxit de joves immigrants a l'ensenyament superior i al món professional

[cat] L'educació dels immigrants és un tema prioritari a les agendes polítiques de molts països de la OCDE. En molts casos, els governs s'han preocupat especialment de la seva integració al món del treball però creix l'interès en els seus resultats al sistema educatiu i en la revisió de les polítiques adreçades a respondre a les seves necessitats educatives i formatives. La majoria d'aquests estudis es situen a l'esfera de l'educació infantil, primària, secundaria i formació professional, per això resulta pràcticament impossible trobar informes que analitzin el baix percentatge d'accés d'estudiants immigrants extracomunitaris a la universitat (al voltant de 3,3% en el cas de Catalunya); que contribueixin a entendre els factors que configuren les trajectòries d'èxit escolar i d'integració laboral dels estudiants immigrants que accedeixen i completen els estudis universitaris; que puguin donar pautes per desenvolupar polítiques educatives que millorin els resultats d'aprenentatge dels estudiants immigrants; i que puguin servir com a mirall i incentiu per a altres persones immigrants i, perquè no, també del país. Aquest projecte ha estudiat el conjunt d'elements que condicionen l'accés dels joves immigrants als estudis universitaris, i a l'estatus laboral que els hi hauria de possibilitar la seva formació universitària.L'estudi ha consistit en una metaanàlisi dels documents existents sobre el tema i en la realització de 8 narratives biogràfiques; quatre de persones cursant diferents estudis a les universitats catalanes i quatre que ja s'han incorporat al món del professional. Aquestes narratives venen acompanyades de 8 vídeos que exploren noves maneres de visibilització d'aquesta població i es transformen en una pràctica d'autoria. Aquest material visual pot servir com a recurs educatiu, en la mida que pugui ser un mirall i un incentiu per a altres persones immigrants i del país.Finalment, presenta un seguit de recomanacions per als responsables de les polítiques i dels centres educatius.

Quality Control/Quality Assurance Testing for Joint Density and Segregation of Asphalt Mixtures, TR-623, 2013

Longitudinal joint quality control/assurance is essential to the successful performance of asphalt pavements and it has received considerable amount of attention in recent years. The purpose of the study is to evaluate the level of compaction at the longitudinal joint and determine the effect of segregation on the longitudinal joint performance. Five paving projects with the use of traditional butt joint, infrared joint heater, edge restraint by milling and modified butt joint with the hot pinch longitudinal joint construction techniques were selected in this study. For each project, field density and permeability tests were made and cores from the pavement were obtained for in-lab permeability, air void and indirect tensile strength. Asphalt content and gradations were also obtained to determine the joint segregation. In general, this study finds that the minimum required joint density should be around 90.0% of the theoretical maximum density based on the AASHTO T166 method. The restrained-edge by milling and butt joint with the infrared heat treatment construction methods both create the joint density higher than this 90.0% limit. Traditional butt joint exhibits lower density and higher permeability than the criterion. In addition, all of the projects appear to have segregation at the longitudinal joint except for the edge-restraint by milling method.

Cost-Benefit Analysis of Sequential Warning Lights in Nighttime Work Zone Tapers, TPF-5(081), 2011

Improving safety at nighttime work zones is important because of the extra visibility concerns. The deployment of sequential lights is an innovative method for improving driver recognition of lane closures and work zone tapers. Sequential lights are wireless warning lights that flash in a sequence to clearly delineate the taper at work zones. The effectiveness of sequential lights was investigated using controlled field studies. Traffic parameters were collected at the same field site with and without the deployment of sequential lights. Three surrogate performance measures were used to determine the impact of sequential lights on safety. These measures were the speeds of approaching vehicles, the number of late taper merges and the locations where vehicles merged into open lane from the closed lane. In addition, an economic analysis was conducted to monetize the benefits and costs of deploying sequential lights at nighttime work zones. The results of this study indicates that sequential warning lights had a net positive effect in reducing the speeds of approaching vehicles, enhancing driver compliance, and preventing passenger cars, trucks and vehicles at rural work zones from late taper merges. Statistically significant decreases of 2.21 mph mean speed and 1 mph 85% speed resulted with sequential lights. The shift in the cumulative speed distributions to the left (i.e. speed decrease) was also found to be statistically significant using the Mann-Whitney and Kolmogorov-Smirnov tests. But a statistically significant increase of 0.91 mph in the speed standard deviation also resulted with sequential lights. With sequential lights, the percentage of vehicles that merged earlier increased from 53.49% to 65.36%. A benefit-cost ratio of around 5 or 10 resulted from this analysis of Missouri nighttime work zones and historical crash data. The two different benefitcost ratios reflect two different ways of computing labor costs.

Instrumental leadership: An extension of the Full-Range Leadership Theory

From a theoretical perspective, an extension to the Full Range leadership Theory (FRLT) seems needed. In this paper, we explain why instrumental leadership--a class of leadership includes leader behaviors focusing on task and strategic aspects that are neither values nor exchange oriented--can fulfill this extension. Instrument leadership is composed of four factors: environmental monitoring, strategy formulation and implementation, path-goal facilitation and outcome monitoring; these aspects of leadership are currently not included in any of the FRLT's nine leadership scales (as measured by the MLQ--Multifactor Leadership Questionnaire). We present results from two empirical studies using very large samples from a wide array of countries (N > 3,000) to examine the factorial, discriminant and criterion-related validity of the instrumental leadership scales. We find support for a four-factor instrumental leadership model, which explains incremental variance in leader outcomes in over and above transactional and transformational leadership.

International collaborative proficiency study of Human Papillomavirus type 16 serology.

We performed an international proficiency study of Human Papillomavirus (HPV) type 16 serology. A common methodology for serology based on virus-like particle (VLP) ELISA was used by 10 laboratories in 6 continents. The laboratories used the same VLP reference reagent, which was selected as the most stable, sensitive and specific VLP preparation out of VLPs donated from 5 different sources. A blinded proficiency panel consisting of 52 serum samples from women with PCR-verified HPV 16-infection, 11 control serum samples from virginal women and the WHO HPV 16 International Standard (IS) serum were distributed. The mean plus 3 standard deviations of the negative control serum samples was the most generally useful "cut-off" criterion for distinguishing positive and negative samples. Using sensitivity of at least 50% and a specificity of 100% as proficiency criteria, 6/10 laboratories were proficient. In conclusion, an international Standard Operating Procedure for HPV serology, an international reporting system in International Units (IU) and a common "cut-off" criterion have been evaluated in an international HPV serology proficiency study.

Accuracy of four cardiovascular risk scores in a Swiss population-based cohort

Purpose: To assess the global cardiovascular (CV) risk of an individual, several scores have been developed. However, their accuracy and comparability need to be evaluated in populations others from which they were derived. The aim of this study was to compare the predictive accuracy of 4 CV risk scores using data of a large population-based cohort. Methods: Prospective cohort study including 4980 participants (2698 women, mean age± SD: 52.7±10.8 years) in Lausanne, Switzerland followed for an average of 5.5 years (range 0.2 - 8.5). Two end points were assessed: 1) coronary heart disease (CHD), and 2) CV diseases (CVD). Four risk scores were compared: original and recalibrated Framingham coronary heart disease scores (1998 and 2001); original PROCAM score (2002) and its recalibrated version for Switzerland (IAS-AGLA); Reynolds risk score. Discrimination was assessed using Harrell's C statistics, model fitness using Akaike's information criterion (AIC) and calibration using pseudo Hosmer-Lemeshow test. The sensitivity, specificity and corresponding 95% confidence intervals were assessed for each risk score using the highest risk category ([20+ % at 10 years) as the "positive" test. Results: Recalibrated and original 1998 and original 2001 Framingham scores show better discrimination (>0.720) and model fitness (low AIC) for CHD and CVD. All 4 scores are correctly calibrated (Chi2<20). The recalibrated Framingham 1998 score has the best sensitivities, 37.8% and 40.4%, for CHD and CVD, respectively. All scores present specificities >90%. Framingham 1998, PROCAM and IAS-AGLA scores include the greatest proportion of subjects (>200) in the high risk category whereas recalibrated Framingham 2001 and Reynolds include <=44 subjects. Conclusion: In this cohort, we see variations of accuracy between risk scores, the original Framingham 2001 score demonstrating the best compromise between its accuracy and its limited selection of subjects in the highest risk category. We advocate that national guidelines, based on independently validated data, take into account calibrated CV risk scores for their respective countries.

Geomorphological method in the elaboration of hazard maps for flash-floods in the municipality of Jucuarán (El Salvador)

This work deals with the elaboration of flood hazard maps. These maps reflect the areas prone to floods based on the effects of Hurricane Mitch in the Municipality of Jucuarán of El Salvador. Stream channels located in the coastal range in the SE of El Salvador flow into the Pacific Ocean and generate alluvial fans. Communities often inhabit these fans can be affected by floods. The geomorphology of these stream basins is associated with small areas, steep slopes, well developed regolite and extensive deforestation. These features play a key role in the generation of flash-floods. This zone lacks comprehensive rainfall data and gauging stations. The most detailed topographic maps are on a scale of 1:25 000. Given that the scale was not sufficiently detailed, we used aerial photographs enlarged to the scale of 1:8000. The effects of Hurricane Mitch mapped on these photographs were regarded as the reference event. Flood maps have a dual purpose (1) community emergency plans, (2) regional land use planning carried out by local authorities. The geomorphological method is based on mapping the geomorphological evidence (alluvial fans, preferential stream channels, erosion and sedimentation, man-made terraces). Following the interpretation of the photographs this information was validated on the field and complemented by eyewitness reports such as the height of water and flow typology. In addition, community workshops were organized to obtain information about the evolution and the impact of the phenomena. The superimposition of this information enables us to obtain a comprehensive geomorphological map. Another aim of the study was the calculation of the peak discharge using the Manning and the paleohydraulic methods and estimates based on geomorphologic criterion. The results were compared with those obtained using the rational method. Significant differences in the order of magnitude of the calculated discharges were noted. The rational method underestimated the results owing to short and discontinuous periods of rainfall data with the result that probabilistic equations cannot be applied. The Manning method yields a wide range of results because of its dependence on the roughness coefficient. The paleohydraulic method yielded higher values than the rational and Manning methods. However, it should be pointed out that it is possible that bigger boulders could have been moved had they existed. These discharge values are lower than those obtained by the geomorphological estimates, i.e. much closer to reality. The flood hazard maps were derived from the comprehensive geomorphological map. Three categories of hazard were established (very high, high and moderate) using flood energy, water height and velocity flow deduced from geomorphological and eyewitness reports.