Une heuristique de recherche à voisinage variable pour le problème du voyageur de commerce avec fenêtres de temps

Nous adaptons une heuristique de recherche à voisinage variable pour traiter le problème du voyageur de commerce avec fenêtres de temps (TSPTW) lorsque l'objectif est la minimisation du temps d'arrivée au dépôt de destination. Nous utilisons des méthodes efficientes pour la vérification de la réalisabilité et de la rentabilité d'un mouvement. Nous explorons les voisinages dans des ordres permettant de réduire l'espace de recherche. La méthode résultante est compétitive avec l'état de l'art. Nous améliorons les meilleures solutions connues pour deux classes d'instances et nous fournissons les résultats de plusieurs instances du TSPTW pour la première fois.

AN INVESTIGATION OF VARIABLE VALVE TIMING EFFECTS ON HCCI ENGINE PERFORMANCE

The Homogeneous Charge Compression Ignition (HCCI) engine is a promising combustion concept for reducing NOx and particulate matter (PM) emissions and providing a high thermal efficiency in internal combustion engines. This concept though has limitations in the areas of combustion control and achieving stable combustion at high loads. For HCCI to be a viable option for on-road vehicles, further understanding of its combustion phenomenon and its control are essential. Thus, this thesis has a focus on both the experimental setup of an HCCI engine at Michigan Technological University (MTU) and also developing a physical numerical simulation model called the Sequential Model for Residual Affected HCCI (SMRH) to investigate performance of HCCI engines. The primary focus is on understanding the effects of intake and exhaust valve timings on HCCI combustion. For the experimental studies, this thesis provided the contributions for development of HCCI setup at MTU. In particular, this thesis made contributions in the areas of measurement of valve profiles, measurement of piston to valve contact clearance for procuring new pistons for further studies of high geometric compression ratio HCCI engines. It also consists of developing and testing a supercharging station and the setup of an electrical air heater to extend the HCCI operating region. The HCCI engine setup is based on a GM 2.0 L LHU Gen 1 engine which is a direct injected engine with variable valve timing (VVT) capabilities. For the simulation studies, a computationally efficient modeling platform has been developed and validated against experimental data from a single cylinder HCCI engine. In-cylinder pressure trace, combustion phasing (CA10, CA50, BD) and performance metrics IMEP, thermal efficiency, and CO emission are found to be in good agreement with experimental data for different operating conditions. Effects of phasing intake and exhaust valves are analyzed using SMRH. In addition, a novel index called Fuel Efficiency and Emissions (FEE) index is defined and is used to determine the optimal valve timings for engine operation through the use of FEE contour maps.

Splitting of a prevalent Mycobacterium bovis spoligotype by variable-number tandem-repeat typing reveals high heterogeneity in an evolving clonal group

Mycobacterium bovis populations in countries with persistent bovine tuberculosis usually show a prevalent spoligotype with a wide geographical distribution. This study applied mycobacterial interspersed repetitive-unit-variable-number tandem-repeat (MIRU-VNTR) typing to a random panel of 115 M. bovis isolates that are representative of the most frequent spoligotype in the Iberian Peninsula, SB0121. VNTR typing targeted nine loci: ETR-A (alias VNTR2165), ETR-B (VNTR2461), ETR-D (MIRU4, VNTR580), ETR-E (MIRU31, VNTR3192), MIRU26 (VNTR2996), QUB11a (VNTR2163a), QUB11b (VNTR2163b), QUB26 (VNTR4052), and QUB3232 (VNTR3232). We found a high degree of diversity among the studied isolates (discriminatory index [D] = 0.9856), which were split into 65 different MIRU-VNTR types. An alternative short-format MIRU-VNTR typing targeting only the four loci with the highest variability values was found to offer an equivalent discriminatory index. Minimum spanning trees using the MIRU-VNTR data showed the hypothetical evolution of an apparent clonal group. MIRU-VNTR analysis was also applied to the isolates of 176 animals from 15 farms infected by M. bovis SB0121; in 10 farms, the analysis revealed the coexistence of two to five different MIRU types differing in one to six loci, which highlights the frequency of undetected heterogeneity.

Limitations of spoligotyping and variable-number tandem-repeat typing for molecular tracing of Mycobacterium bovis in a high-diversity setting

This study describes the attempt to trace the first Mycobacterium bovis outbreak in alpacas (Lama pacos) in Spain by spoligotyping and variable-number tandem-repeat (VNTR) analysis. Due to high genotype diversity, no matching source was identified, but local expansion of a clonal group was found and its significance for molecular tracing is discussed.

Discovery of stable and variable differences in the Mycobacterium avium subsp. paratuberculosis type I, II, and III genomes by pan-genome microarray analysis

Mycobacterium avium subsp. paratuberculosis is an important animal pathogen widely disseminated in the environment that has also been associated with Crohn's disease in humans. Three M. avium subsp. paratuberculosis genomotypes are recognized, but genomic differences have not been fully described. To further investigate these potential differences, a 60-mer oligonucleotide microarray (designated the MAPAC array), based on the combined genomes of M. avium subsp. paratuberculosis (strain K-10) and Mycobacterium avium subsp. hominissuis (strain 104), was designed and validated. By use of a test panel of defined M. avium subsp. paratuberculosis strains, the MAPAC array was able to identify a set of large sequence polymorphisms (LSPs) diagnostic for each of the three major M. avium subsp. paratuberculosis types. M. avium subsp. paratuberculosis type II strains contained a smaller genomic complement than M. avium subsp. paratuberculosis type I and M. avium subsp. paratuberculosis type III genomotypes, which included a set of genomic regions also found in M. avium subsp. hominissuis 104. Specific PCRs for genes within LSPs that differentiated M. avium subsp. paratuberculosis types were devised and shown to accurately screen a panel (n = 78) of M. avium subsp. paratuberculosis strains. Analysis of insertion/deletion region INDEL12 showed deletion events causing a reduction in the complement of mycobacterial cell entry genes in M. avium subsp. paratuberculosis type II strains and significantly altering the coding of a major immunologic protein (MPT64) associated with persistence and granuloma formation. Analysis of MAPAC data also identified signal variations in several genomic regions, termed variable genomic islands (vGIs), suggestive of transient duplication/deletion events. vGIs contained significantly low GC% and were immediately flanked by insertion sequences, integrases, or short inverted repeat sequences. Quantitative PCR demonstrated that variation in vGI signals could be associated with colony growth rate and morphology.

Une heuristique de recherche à voisinage variable pour le problème du voyageur de commerce avec fenêtres de temps

Nous adaptons une heuristique de recherche à voisinage variable pour traiter le problème du voyageur de commerce avec fenêtres de temps (TSPTW) lorsque l'objectif est la minimisation du temps d'arrivée au dépôt de destination. Nous utilisons des méthodes efficientes pour la vérification de la réalisabilité et de la rentabilité d'un mouvement. Nous explorons les voisinages dans des ordres permettant de réduire l'espace de recherche. La méthode résultante est compétitive avec l'état de l'art. Nous améliorons les meilleures solutions connues pour deux classes d'instances et nous fournissons les résultats de plusieurs instances du TSPTW pour la première fois.

Insulator-to-metal transition in vanadium supersaturated silicon: variable-range hopping and Kondo effect signatures

We report the observation of the insulator-to-metal transition in crystalline silicon samples supersaturated with vanadium. Ion implantation followed by pulsed laser melting and rapid resolidification produce high quality single-crystalline silicon samples with vanadium concentrations that exceed equilibrium values in more than 5 orders of magnitude. Temperature-dependent analysis of the conductivity and Hall mobility values for temperatures from 10K to 300K indicate that a transition from an insulating to a metallic phase is obtained at a vanadium concentration between 1.1 × 10^(20) and 1.3 × 10^(21) cm^(−3) . Samples in the insulating phase present a variable-range hopping transport mechanism with a Coulomb gap at the Fermi energy level. Electron wave function localization length increases from 61 to 82 nm as the vanadium concentration increases in the films, supporting the theory of impurity band merging from delocalization of levels states. On the metallic phase, electronic transport present a dispersion mechanism related with the Kondo effect, suggesting the presence of local magnetic moments in the vanadium supersaturated silicon material.

Variable-spectrum solar simulator

The invention relates to a variable-spectrum solar simulator for characterising photovoltaic systems. The simulator can be used to obtain a spectrum adjusted to the solar spectrum, both for a standard spectrum or a real spectrum adjusted to local irradiation conditions. The simulator also allows the spatial-angular characteristics of the sun to be reproduced. The invention comprises: a broad-spectrum light source, the flux from which is emitted through an aperture; an optical system which collimates the primary source; a system which disperses the beam chromatically; an optical system which forms an image of the dispersed primary source at a given position, at which a spatial mask is placed in order to filter the received irradiance spectrally; an optical system which captures the filtered spectrum and returns, mixes and concentrates same in a secondary source with the desired spectral, angular, and spatial characteristics; an optical system which collimates the secondary source such that it reproduces the angular characteristics of the sun; and a control system.

Estrategias de cobertura de carteras e índices de renta variable: el mercado español

En línea con la creciente importancia de la cobertura de riesgos, la eficacia de las diferentes estrategias y las posibilidades de mejorar a través de diferentes modelos estocásticos han sido analizados en un gran número de estudios académicos en diferentes campos, activos financieros, energía, petróleo, etc. La controversia en la literatura sobre estrategias de cobertura se concentra en torno a tres aspectos principals. En primer lugar, una cuestión clave es la elección de la medida de eficacia que va a determinar la función de optimizar. Entre las diferentes medidas propuestas, la reducción de la varianza es el enfoque más simple y común. Muchos autores consideran que otros criterios, como diferentes especificaciones de funciones de utilidad, el riesgo de pérdidas o la variación de la rentabilidad ,se deben tomar en cuenta con el fin de medir la efectividad de cobertura. Estos criterios derivan en diferentes medidas de efectividad de cobertura como el equivalente cierto (CE), Valor en Riesgo (VaR), Valor en Riesgo Condicional (CVaR) o Pérdida Esperada (ES), Momentos parciales inferiores (LPM), semi-varianza, etc. . Un examen de las principales aportaciones de la literatura muestra la falta de uniformidad o resultados concluyentes en favor de una u otra estrategia. En segundo lugar, otro tema importante es la evolución temporal de la relación de cobertura. Hay una controversia en la literatura en cuanto a si la cobertura dinámica, utilizando relaciones que incorporan la nueva información que llega al mercado, es superior a relaciones estáticas, como la cobertura unitaria o la de mínimos cuadrados. En tercer lugar, cuando se trata de estimar los ratios de cobertura, se emplean muchas técnicas diferentes, que van desde los modelos más simples a enfoques dinámicos muy complejos. Sin embargo, no está claro que estos modelos complejos mejoren la eficacia global y en nuestra opinión, no resuelven favorablemente el compromiso entre complejidad y efectividad...

Análisis de las variables de marketing que afectan al valor del cliente. La permanencia como variable controlable

To know how marketing variables affect customer value is essential for a company in order to be market and customer oriented, and to improve investment efficiency in both attracting and retaining customers. Thus, the assessment of the influence of marketing variables in customer value is of prime importance. This is recognized in many empirical studies of these variables, which address the impact of a single variable (or sets of a few variables) on customer value. A comprehensive, integrated assessment of all marketing variables and their interdependencies is an arduous and complex task for researchers and marketing managers. This research proposes a theoretical model of customer value that takes into account all significant marketing variables that have been partially addressed in empirical investigations of other researchers. These marketing variables include brand and reputation, point of sale, employees, price, termination fee commitment, discounts, complementarity of products, experiences, emotions, perceived value, quality, satisfaction, switching costs, and loyalty. The model incorporates the relationship between each variable with retention and with customer value as well as the relationships between them. A special focus is placed on the empirical analysis of the termination fee commitment and its relationship with customer value. This variable is widely used in the telecommunication’s industry for its influence on customer retention from the moment of purchase. However, there is strikingly little research in this topic. A large customer database of a telecommunications company containing five years information about 63.165 customers is used for this purpose. Multivariate linear regression and ANOVA method are applied...

Cobertura de carteras índice de renta variable con futuros sobre el IBEX 35

Las investigaciones relativas al ratio óptimo de cobertura con futuros de una cartera que replica un índice de renta variable se han llevado a cabo hasta la fecha mediante técnicas econométricas. Los modelos aplicados han ido perfeccionando sus especificaciones, pero todos ellos parten de unos supuestos que se alejan del mundo real, ya que no consideran el pago discreto de dividendos y se basan en una serie del futuro de próximo vencimiento que presenta saltos, al estar compuesta por mini-series encadenadas de futuros de distinto vencimiento. Como consecuencia de estas limitaciones, aunque la eficacia de la cobertura de los modelos econométricos puede considerarse satisfactoria en términos generales, se producen errores significativos en algunos puntos de la serie. La principal aportación de esta tesis a la investigación académica y a la práctica profesional de la gestión de carteras es la definición de un Modelo Algebraico de Cobertura (MAC) que no está basado en técnicas econométricas, es más sencillo de aplicar y superior en resultados104 a los modelos econométricos más utilizados hasta la fecha (MCO, ECM y GARCH) 105. El modelo MAC parte del supuesto de mercado eficiente y de la consideración de un horizonte temporal diario de la cobertura...

Diseño y aplicación de un modelo de remuneración variable para una empresa del sector de las telecomunicaciones

Actualmente encontramos una fuerte presión en las organizaciones por adaptarse a un mundo competitivo con un descenso en las utilidades y una incertidumbre constante en su flujo de caja. Estas circunstancias obligan a las organizaciones al mejoramiento continuo buscando nuevas formas de gestionar sus procesos y sus recursos. Para las organizaciones de prestación de servicios en el sector de telecomunicaciones una de las ventajas competitivas más importantes de obtener es la productividad debido a que sus ganancias dependen directamente del número de actividades que puedan ejecutar cada empleado. El reto es hacer más con menos y con mejor calidad. Para lograrlo, la necesidad de gestionar efectivamente los recursos humanos aparece, y aquí es donde los sistemas de compensación toman un rol importante. El objetivo en este trabajo es diseñar y aplicar un modelo de remuneración variable para una empresa de prestación de servicios profesionales en el sector de las telecomunicaciones y con esto aportar al estudio de la gestión del desempeño y del talento humano en Colombia. Su realización permitió la documentación del diseño y aplicación del modelo de remuneración variable en un proyecto del sector de telecomunicaciones en Colombia. Su diseño utilizó las tendencias de programas remunerativos y teorías de gestión de desempeño para lograr un modelo integral que permita el crecimiento sostenido en el largo plazo y la motivación al recurso más importante de la organización que es el talento humano. Su aplicación permitió también la documentación de problemas y aciertos en la implementación de estos modelos.

Development of a state-variable filter for a motion control application.

In collaboration with G.D. SpA I attended an internship with the purpose of developing a filter for the position control of industrial machines during testing and maintenance operations. The filter elaborates a signal in position provided by an electonic handwheel, in order to enable the application to be controlled with a signal in velocity with arbitrarily dynamics chosen during the design phase. Limiting the dynamics of the filter provide a more stable and less demanding reference trajectory which reduce the vibrations and tracking errors of the motor controlled by it. It also prevents misusages of the handwheel from the technician which could end up in harmful interferences between the mechanical parts moved by the handwheel.

Ihwg-μnir: A Miniaturised Near-infrared Gas Sensor Based On Substrate-integrated Hollow Waveguides Coupled To A Micro-nir-spectrophotometer.

A miniaturised gas analyser is described and evaluated based on the use of a substrate-integrated hollow waveguide (iHWG) coupled to a microsized near-infrared spectrophotometer comprising a linear variable filter and an array of InGaAs detectors. This gas sensing system was applied to analyse surrogate samples of natural fuel gas containing methane, ethane, propane and butane, quantified by using multivariate regression models based on partial least square (PLS) algorithms and Savitzky-Golay 1(st) derivative data preprocessing. The external validation of the obtained models reveals root mean square errors of prediction of 0.37, 0.36, 0.67 and 0.37% (v/v), for methane, ethane, propane and butane, respectively. The developed sensing system provides particularly rapid response times upon composition changes of the gaseous sample (approximately 2 s) due the minute volume of the iHWG-based measurement cell. The sensing system developed in this study is fully portable with a hand-held sized analyser footprint, and thus ideally suited for field analysis. Last but not least, the obtained results corroborate the potential of NIR-iHWG analysers for monitoring the quality of natural gas and petrochemical gaseous products.

Low-density Lipoprotein Cholesterol And Radiotherapy-induced Carotid Atherosclerosis In Subjects With Head And Neck Cancer.

Radiotherapy (RT) is a risk factor for accelerated carotid artery atherosclerotic disease in subjects with head and neck cancer. However, the risk factors of RT-induced carotid artery remodeling are not established. This study aimed to investigate the effects of RT on carotid and popliteal arteries in subjects with head and neck cancer and to evaluate the relationship between baseline clinical and laboratory features and the progression of RT-induced atherosclerosis. Eleven men (age = 57.9 ± 6.2years) with head and neck cancer who underwent cervical bilateral irradiation were prospectively examined by clinical and laboratory analysis and by carotid and popliteal ultrasound before and after treatment (mean interval between the end of RT and the post-RT assessment = 181 ± 47 days). No studied subject used hypocholesterolemic medications. Significant increases in carotid intima-media thickness (IMT) (0.95 ± 0.08 vs. 0.87 ± 0.05 mm; p < 0.0001) and carotid IMT/diameter ratio (0.138 ± 0.013 vs. 0.129 ± 0.014; p = 0.001) were observed after RT, while no changes in popliteal structural features were detected. In addition, baseline low-density lipoprotein cholesterol levels showed a direct correlation with RT-induced carotid IMT change (r = 0.66; p = 0.027), while no other studied variable exhibited a significant relationship with carotid IMT change. These results indicate that RT-induced atherosclerosis is limited to the irradiated area and also suggest that it may be predicted by low-density lipoprotein cholesterol levels in subjects with head and neck cancer.