Estudo da influência da temperatura de produtos de charcutaria no processo de fatiagem. Estágio curricular na empresa Nobre Alimentação, S.A.

Mestrado em Engenharia Alimentar - Processamento de Alimentos - Instituto Superior de Agronomia - UL

Perfis de temperatura de produtos refrigerados e congelados durante o armazenamento, picking e distribuição: impacto na qualidade

Mestrado em Engenharia Alimentar - Instituto Superior de Agronomia - UL

Síntese e caracterização de CuNb2O6 e CuNbC através de reação sólido- sólido e gás- sólido a baixa temperatura

The refractory metal carbides have proven important in the development of engineering materials due to their properties such as high hardness, high melting point, high thermal conductivity and high chemical stability. The niobium carbide presents these characteristics. The compounds of niobium impregnated with copper also have excellent dielectric and magnetic properties, and furthermore, the Cu doping increases the catalytic activity in the oxidation processes of hydrogen. This study aimed to the synthesis of nanostructured materials CuNbC and niobium and copper oxide from precursor tris(oxalate) oxiniobate ammonium hydrate through gas-solid and solid-solid reaction, respectively. Both reactions were carried out at low temperature (1000°C) and short reaction time (2 hours). The niobium carbide was produced with 5 % and 11% of copper, and the niobium oxide with 5% of copper. The materials were characterized by X-Ray Diffraction (XRD), Rietveld refinement, Scanning Electron Microscopy (SEM), X-Ray Fluorescence Spectroscopy (XRF), infrared spectroscopy (IR), thermogravimetric (TG) and differential thermal analysis (DTA , BET and particle size Laser. From the XRD analysis and Rietveld refinement of CuNbC with S = 1.23, we observed the formation of niobium carbide and metallic copper with cubic structure. For the synthesis of mixed oxide made of niobium and copper, the formation of two distinct phases was observed: CuNb2O6 and Nb2O5, although the latter was present in small amounts

Modificação superficial de filmes de poliéster usando plasma a baixa temperatura

A polyester film has a vast application field, due some properties that are inherent of this kind of material such as, good mechanical resistance, chemical resistance to acids and bases and low production cost. However, this material has some limitations as low superficial tension, flat surface, low affinity to dyers, and poor adhesion which impede the use of the same ones for some finality as good wettability. Among the existent techniques to increase the superficial tension, plasma as energy source is the more promising technique, because of their versatility and for not polluting the environment. The plasma surface polymeric modification has been used for many researchers, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, polyester films were treated with oxygen plasma varying the treatment time from 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) varying the percentage of each gas the mixture from 0 to 100%, the treatment time remaining constant to all treatments (10 min). After plasma treatment the samples were characterized by contact angle, surface tension, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, with the aim to study the wettability increase of treated polyester films as its variables. In the (O2/N2) plasma treatment of polyester films can be observed an increase of superficial roughness superior to those treated by O2 plasma. By the other hand, the chemical modification through the implantation of polar groups at the surface is obtained more easily using O2 plasma treatment

Estudo da influência da temperatura de brasagem nas uniões zircônia/aço inox 304 utilizando metalização mecânica

Metal-Ceramic (M/C) Zirconia-stainless steel interfaces have been processed through brazing techniques due to the excellent combination of properties such as high temperature stability, high corrosion resistance and good mechanical properties. However, some M/C interfaces show some defects, like porosity and cracks results in the degradation of the interfaces, leading even to its total rupture. Most of time, those defects are associated with an improper brazing parameters selection to the M/C system. In this work, ZrO2 Y-TZP and ZrO2 Mg - PSZ were joint with the stainless steel grade 304 by brazing using a eutectic silver-copper (Ag28Cu) interlayer alloy with different thermal cycles. Ceramic surfaces were previous mechanically metallized with titanium to improve adhesion of the system. The effect of temperature on the M/C interface was studied. SEM-EDS and 3 point flexural bend test were performed to evaluate morphology, chemical composition and mechanical resistance of the M/C interfaces. Lower thermal cycle temperatures produced better results of mechanical resistance, and more regular/ homogeneous reaction layers between braze alloy and metal-ceramic surfaces. Also was proved the AgCu braze alloy activation in situ by titanium

Lixiviação de nitrogênio em Latossolo incubado com lodo de esgoto.

Lodo de esgoto contém teores elevados de N orgânico. Se for aplicado em quantidade excessiva em solos, há risco de poluição de águas subsuperficiais com nitrato, produto da mineralização do N. Por essa razão, um dos critérios agronômicos para a determinação da taxa máxima de aplicação do lodo de esgoto é a quantidade de N mineral que será disponibilizada às culturas. Neste trabalho, são apresentados os resultados relativos à lixiviação de N mineralizado em um Latossolo Vermelho distroférrico incubado durante 224 dias com dois tipos de lodo de esgoto anaeróbios, um de origem urbana (Franca, SP) e outro com presença de despejos industriais (Barueri, SP). Cada lodo de esgoto foi aplicado em quatro doses, contendo 0,13, 0,3, 0,5 e 1,0 g kg-1 de N orgânico. Essa quantidade de substrato mineralizável foi equivalente a 5, 11, 22 e 43 t ha-1 de lodo de Franca, e a 8, 15, 31 e 61 t ha-1 de lodo de Barueri. O experimento foi conduzido em colunas de percolação, sob temperatura de 25 a 28 °C em laboratório, fazendo-se lixiviações com solução extratora de KCl 0,01 mol L-1. Foram determinadas as quantidades de N mineral (N-NH4 + e N-NO3 - + N-NO2 - ) extraídas nos percolados em doze épocas. Houve correlação significativa entre as quantidades aplicadas de N na forma orgânica e as quantidades de N mineralizadas durante a incubação nos dois tipos de lodo avaliados. O potencial de mineralização estimado pelo modelo exponencial simples foi de 73 mg kg-1 de N no solo sem aplicação de lodo, e aumentou de 107 para 224 mg kg-1 e de 132 para 364 mg kg-1 nos tratamentos com o lodo de esgoto de Franca e de Barueri, respectivamente. A fração de mineralização potencial do N orgânico dos dois tipos de lodo de esgoto decresceu com o aumento das doses aplicadas: 26, 25, 21 e 14 % para o de Franca, e 43, 39, 34 e 27 % para o de Barueri. Em consequência, o potencial de lixiviação de N no Latossolo aumentou de 46 para 207 % com as doses do lodo de Franca, e de 81 para 399 % com as doses do lodo de Barueri.

Síntese enzimática de ésteres de açúcar: surfactantes e polímeros como novos materiais ambientalmente seguros

Sugar esters are substances which possess surfactant, antifungical and bactericidal actions and can be obtained through two renewable sources of raw materials: sugars and vegetable oils. Their excellent biodegradability, allied to lhe fact that they are non toxic, insipid, inodorous, biocompatible, no-ionic, digestible and because they can resist to adverse conditions of temperature, pH and salinity, explain lhe crescent use of these substances in several sections of lhe industry. The objective of this thesis was to synthesize and characterize surfactants and polymers containing sugar branched in their structures, through enzymatic transesterification of vinyl esters and sugars, using alkaline protease from Bacillus subtilis as catalyst, in organic medium (DMF).Three types of sugars were used: L-arabinose, D-glucose and sucrose and two types of vinyl esters: vinyl laurate and vinyl adipate. Aiming to reach high conversions from substrates to products for a possible future large scale industrial production, a serie of variables was optimized, through Design of Experiments (DOE), using Response Surface Methodology (RSM).The investigated variables were: (1) enzyme concentration; (2) molar reason of substrates; (3) water/solvent rale; (4) temperature and (5) time. We obtained six distinct sugar esters: 5-0-lauroyl L-arabinose, 6-0-lauroyl D-glucose, 1'-O-lauroyl sucrose, 5-0-vinyladipoyl L-arabinose, 6-0-vinyladipoyl D-glucose and 1 '-O-vinyladipoyl sucrose, being lhe last three polymerizable. The progress of lhe reaction was monitored by HPLC analysis, through lhe decrease of sugar concentration in comparison to lhe blank. Qualitative analysis by TLC confirmed lhe formation of lhe products. In lhe purification step, two methodologies were adopted: (1) chromatographic column and (2) extraction with hot acetone. The acylation position and lhe chemical structure were determined by 13C-RMN. The polymerization of lhe three vinyl sugar esters was possible, through chemical catalysis, using H2O2 and K2S2O8 as initiators, at 60°C, for 24 hours. IR spectra of lhe monomers and respective polymers were compared revealing lhe disappearance of lhe vinyl group in lhe polymer spectra. The molar weights of lhe polymers were determined by GPC and presented lhe following results: poly (5-0-vinyladipoyl L-arabinose): Mw = 7.2 X 104; PD = 2.48; poly (6-0-vinyladipoyl D-glucose): Mw = 2.7 X 103; PD = 1.75 and poly (1'-O-vinyladipoyl sucrose): Mw = 4.2 X 104; PD = 6.57. The six sugar esters were submitted to superficial tension tests for determination of the critical micelle concentrations (CMC), which varied from 122 to 167 ppm. Finally, a study of applicability of these sugar esters, as lubricants for completion fluids of petroleum wells was' accomplished through comparative analysis of lhe efficiency of these sugar esters, in relation to three commercial lubricants. The products synthesized in this thesis presented equivalent or superior action to lhe tested commercial products

Estudo de Matérias-Primas do Rio Grande do Norte para Uso em Revestimento Poroso: Influência do teor de dolomita e temperatura de calcinação nas propriedades físico-mecânicas

The state of Rio Grande do Norte presents a great potentiality for the production of ceramic tiles because of having natural raw material in quantity and quality making its economical exploration possible, beyond the great energetic differential of the state, the natural gás. This works aims to study the influence of the dolomite and granulometry concentration and calcinations temperature in the obtaining of formulations for porous coverings which have to be coherent to the project,s specifications. The experiments have involved the physical-chemical and mineralogical characterizations of raw materials and mechanical tests in the dry and burnt proof bodies preceding a mixture experiment planning with the use of the response surface methodology, in order to get the best raw materials combinations to produce a ceramic mass with specific properties. The twelve ceramic masses studied in this work were prepared by the via dry process, characterized, shaped by uniaxial pressing and sinterized in the temperatures of 940ºC, 1000ºC, 1060ºC, 1120ºC and 1180ºC, using a fast burning cycle. The crystalline phases formed during the sintering in the temperatures in study have revealed the presence of anorthite and diopside beyond quartz with a remaining phase. These phases were the main responsible ones by the physical- mechanical properties of the sinterized proof bodies. The proof bodies after the sintering stage have presented water absorption higher than 10% and a good dimensional stability in all studied temperatures. However, the flexural breaking strength results in the temperatures of 940ºC, 1000ºC and 1060ºC, under the temperature zone of the vitrification of ceramic whiteware do not reach the flexural breaking strength specific for the porous wall tile (15 MPa), but in the temperature of 1120ºC next to the vitrification temperature zone, some whiteware ceramic (formulations) has reached the specified value for the porous wall tile. The results of this work have showed that the studied raw materials have great importance for used in the production of porous wall tiles (BIII)

Elimination of urine in response to water intake is consistent in well-hydrated individuals

A simple method has been recently proposed to assess acute hydration status in humans; however, several questions remain regarding its reliability, validity, and practicality. Objective: Establish reliability of a simple method to assess euhydration, that is, to analyze whether this method can be used as a consistent indicator of a person´s hydration status. In addition, the study sought to assess the effect exercise has on urine volume when euhydration is maintained and a standardized volume of water is ingested. Methods: Five healthy physically active men and five healthy physically active women, 22.5 ± 2.3 years of age (mean ± standard deviation) reported to the laboratory after fasting for 10 hours or more on three occasions, each one week apart. During the two identical resting euhydration conditions (EuA and EuB), participants remained seated for 45 minutes. During the exercise condition (EuExer), participants exercised intermittently in an environmental chamber (average temperature and relative humidity = 32 ± 3°C and 65 ± 7%, respectively) for a period of 45 minutes and drank water to offset loss due to sweating. The order of treatments was randomized. Upon finishing the treatment period, they ingested a volume of water equivalent to 1.43% body mass (BM) within 30 minutes. Urine was collected and measured henceforth every 30 minutes for 3 hours. Results: Urine volume eliminated during EuExer (1205 ± 399.5 ml) was not different from EuB (1072.2±413.1 ml) or EuA (1068 ± 382.87 ml) (p-value = 0.44). Both resting conditions were practically identical (p-value = 0.98) and presented a strong intraclass correlation (r = 0.849, p-value = 0.001). Conclusions: This method, besides simple, proved to be consistent in all conditions; therefore, it can be used with the certainty that measurements are valid and reliable.

Microclimate, development and productivity of robusta coffee shaded by rubber trees and at full sun.

Existem poucos estudos sobre arborização de café conilon com seringueira. Objetivou-se avaliar o microclima, desenvolvimento e produtividade do cafeeiro conilon cultivado a pleno sol e sob sombreamento proporcionado pela seringueira. O experimento foi composto por uma lavoura de café conilon (Coffea canephora), cultivada a pleno sol e outra lavoura de café consorciada com seringueira (Hevea brasiliensis). A seringueira e o cafeeiro foram plantados no sentido Leste/Oeste, em Jaguaré, Espírito Santo, Brasil. Avaliou-se a luminosidade, temperatura e umidade relativa do ar, concentração foliar de nutrientes, medição dos internódios dos ramos plagiotrópicos e ortotrópicos, área foliar, índice relativo de clorofila, e a produtividade do cafeeiro. O sombreamento influenciou diretamente no microclima, reduzindo a temperatura do ar no verão e no inverno e aumentando a umidade relativa. A luminosidade no verão teve uma redução media de 905 lumens ft-2 ao longo de todo dia, equivalente a 72,49%, e no inverno de 1665 lumens ft-2, equivalente a 88,04%. O sombreamento proporcionou maior estiolamento dos ramos plagiotrópicos e ortotrópicos, bem como maior expansão foliar. A concentração foliar de Fe e Mn foram maiores no cafeeiro arborizado. A clorofila b e total estimada foram maior no cafeeiro cultivado a pleno sol. O denso sombreamento oferecido pela seringueira nas condições estudadas proporcionou perdas na produtividade do cafeeiro, contudo, ocorre a formação da seringueira.

Análise de homogeneidade de temperatura mínima mensal para o Estado de São Paulo.

Neste trabalho, o pacote Climatol-R foi aplicado a 122 séries mensais de temperatura mínima, cobrindo o interior do estado de São Paulo para os anos 1940 até 2012.

Tasa efectiva por imposición directa de El Salvador en comparación con Nicaragua, una herramienta para la toma de decisiones de inversión.

La medición de la presión fiscal en materia de impuestos sobre renta ha sido objeto de un análisis continuo por parte de los sujetos pasivos de este impuesto, a partir del siglo XX, debido a las continuas reformas en las leyes de índole tributario por parte de los Gobiernos en sus respectivos países; en El Salvador puede denotarse que no ha existido divulgación, por alguna entidad cualquiera que sea su denominación, sobre una guía de referencia para el cálculo de la tasa efectiva de Impuesto Sobre la Renta, que ayude a los contribuyentes a medir porcentualmente este impacto en términos de los resultados obtenidos en sus negocios. En relación a lo anterior, se presenta una guía para la determinación del cálculo de tasa efectiva por imposición directa como medio de análisis de la carga impositiva en la administración de las empresas. Con el fin de ampliar y para una mejor comprensión, se muestran diferentes conceptos y doctrina que amparan su aplicación, por medio de libros, revistas técnicas en materia tributaria, así como artículos provenientes de éstas. Para el inversionista es importante visualizar anticipadamente el ambiente económico y la imposición fiscal establecida por los Gobiernos que recaerá sobre la actividad económica que pretende iniciar, es por ello, que se plantea un caso práctico hipotético de una empresa radicada en El Salvador en comparación con una ubicada en Nicaragua bajo la normativa de la Ley de Impuesto Sobre la Renta para la primera y en el caso de la segunda conforme a la Ley de Equidad Fiscal; con el objetivo de diferenciar entre ambas normativas fiscales los beneficios otorgados por los Gobiernos respectivos. Y a la vez, demostrar al inversionista el beneficio que representa la guía de cálculo de la tasa efectiva por imposición directa como insumo en la toma de decisiones de inversión. Con el fin de determinar el conocimiento que se tiene en la práctica sobre dicho concepto, se utilizaron dos tipos de investigación de campo: la entrevista y el cuestionario, dirigidos al personal clave de las entidades, proporcionando un resultado donde se evidencia la necesidad de una guía que explique la metodología a seguir para la determinación de la presión fiscal por imposición directa y el impuesto diferido, como consecuencia del análisis de las partidas que generan la diferencia entre la base financiera y la base impositiva del Impuesto Sobre la Renta. Y por último, se tienen las conclusiones y recomendaciones a las que se ha llegado a partir del diagnóstico de la investigación, por medio de los resultados obtenidos en las encuestas y entrevistas practicadas a la población en estudio, donde se refleja que no es utilizada ninguna guía como herramienta para medir la presión fiscal en la mayoría de las empresas en estudio. Haciendo la recomendación a los encargados de los departamentos de contabilidad e impuestos, recibir capacitaciones técnicas sobre esos conceptos, así como la lectura del presente trabajo de grado, para el cálculo de la tasa efectiva de impuestos y por medio de ésta controlar las partidas que generan diferencia entre la tasa nominal y efectiva, todo lo anterior en el marco de abonar a la toma de decisiones de inversión, como un elemento a tomar en cuenta en el análisis integral que esta actividad implica.

Contribución al estudio de la temperatura de módulos FV de diferentes tecnologías en condiciones de sol real

La energía solar fotovoltaica ha adquirido en los últimos años una presencia cada vez mayor en el mercado mundial de producción energética y, para que realmente sea una forma de producción energética competitiva, es importante abaratar costes y poder tener una estimación fiel de la energía que se puede producir en una instalación fotovoltaica antes de su localización, para así poder tomar decisiones sobre la ubicación y aplicación de las tecnologías más adecuadas. Son varias las tecnologías presentes en el mercado fotovoltaico actual y de todas ellas, la de silicio policristalino es la que está más extendida, siendo sobre la que más se ha investigado y analizado su comportamiento. Actualmente existen nuevas tecnologías de módulos fotovoltaicos que están adquiriendo una cuota de mercado cada vez más significativa, entre las que destacan las de lámina delgada. Para poder realizar una estimación de la energía que puede producir un módulo, es de vital importancia conocer la temperatura de operación del mismo. Por ese motivo, en este trabajo se analiza la aplicabilidad de modelos de predicción de temperatura de operación de módulos existentes en la literatura a las nuevas tecnologías, se proponen nuevos modelos de predicción de temperatura y se utilizan en escalas temporales diferentes para poder comprobar la eficacia de los mismos. El estudio se realiza con módulos trabajando en condiciones de sol real, pues es así como funcionarán las instalaciones fotovoltaicas de producción energética. En este trabajo se ha comprobado que se obtienen mejores resultados en la predicción horaria de temperatura de operación de módulos que en la predicción de temperatura instantánea. También se ha comprobado que uno de los modelos propuestos, el de dos coeficientes, consigue resultados similares a otros modelos existentes previamente en la literatura, pese a la sencillez de cálculo del mismo. La aplicación de este modelo propuesto para la predicción de la producción energética podría ser de gran ayuda para una estimación fiel previa a la instalación de una planta fotovoltaica. El hecho de que sea aplicable a nuevas tecnologías fotovoltaicas de lámina delgada como el telururo de cadmio, el silicio amorfo y el tándem silicio amorfo y microcristalino es un valor añadido. Poder predecir con precisión la producción energética es lo que hará que la energía solar fotovoltaica se perfile como una energía competitiva, y adquiera una posición dominante entre las energías renovables.

Conversão térmica e termocatalítica à baixa temperatura do óleo de girassol para obtenção de bio-óleo

The use of biofuels remotes to the eighteenth century, when Rudolf Diesel made the first trials using peanut oil as fuel in a compression ignition engine. Based on these trials, there was the need for some chemical change to vegetable oil. Among these chemical transformations, we can mention the cracking and transesterification. This work aims at conducting a study using the thermocatalytic and thermal cracking of sunflower oil, using the Al-MCM-41 catalyst. The material type mesoporous Al-MCM-41 was synthesized and characterized by Hydrothermical methods of X-ray diffraction, scanning electron microscopy, nitrogen adsorption, absorption spectroscopy in the infrared and thermal gravimetric analysis (TG / DTG).The study was conducted on the thermogravimetric behavior of sunflower oil on the mesoporous catalyst cited. Activation energy, conversion, and oil degradation as a function of temperature were estimated based on the integral curves of thermogravimetric analysis and the kinetic method of Vyazovkin. The mesoporous material Al-MCM-41 showed one-dimensional hexagonal formation. The study of the kinetic behavior of sunflower oil with the catalyst showed a lower activation energy against the activation energy of pure sunflower oil. Two liquid fractions of sunflower oil were obtained, both in thermal and thermocatalytic pyrolisis. The first fraction obtained was called bio-oil and the second fraction obtained was called acid fraction. The acid fraction collected, in thermal and thermocatalytic pyrolisis, showed very high level of acidity, which is why it was called acid fraction. The first fraction was collected bio-called because it presented results in the range similar to petroleum diesel

Processamento Inteligente de Sinais de Pressão e Temperatura Adquiridos Através de Sensores Permanentes em Poços de Petróleo

Originally aimed at operational objectives, the continuous measurement of well bottomhole pressure and temperature, recorded by permanent downhole gauges (PDG), finds vast applicability in reservoir management. It contributes for the monitoring of well performance and makes it possible to estimate reservoir parameters on the long term. However, notwithstanding its unquestionable value, data from PDG is characterized by a large noise content. Moreover, the presence of outliers within valid signal measurements seems to be a major problem as well. In this work, the initial treatment of PDG signals is addressed, based on curve smoothing, self-organizing maps and the discrete wavelet transform. Additionally, a system based on the coupling of fuzzy clustering with feed-forward neural networks is proposed for transient detection. The obtained results were considered quite satisfactory for offshore wells and matched real requisites for utilization