FEM Analysis to Optimally Design End Mill cutters for Milling of Ti-6Al-4V

This paper presents an FEM analysis conducted for optimally designing end mill cutters through verifying the cutting tool forces and stresses for milling Titanium alloy Ti-6Al-4 V. Initially, the theoretical tool forces are calculated by considering the cutting edge on a cutting tool as the curve of an intersection over a spherical/flat surface based on the model developed by Lee & Altinas [1]. Considering the lowest tool forces the cutting tool parameters are taken and optimal design of end mill is decided for different sizes. Then the 3D CAD models of the end mills are developed and used for Finite Element Method to verify the cutting forces for milling Ti-6Al-4 V. The cutting tool forces, stress, strain concentration (s), tool wear, and temperature of the cutting tool with the different geometric shapes are simulated considering Ti-6Al-4 V as work piece material. Finally, the simulated and theoretical values are compared and the optimal design of cutting tool for different sizes are validated. The present approach considers to improve the quality of machining surface and tool life with effects of the various parameters concerning the oblique cutting process namely axial, radial and tangential forces. Various simulated test cases are presented to highlight the approach on optimally designing end mill cutters.

L'apport de la théorie des systèmes dynamiques complexes à l'ontologie du droit international dans la crise- Analyse de l'action normative du Conseil de sécurité

Cette thèse est une réflexion originale sur le droit international dans la crise, car elle aborde le droit international grâce à une théorie peu connue en droit, celle des systèmes dynamiques complexes. L’étude du cas particulier de la gestion normative de la crise par le Conseil de sécurité illustre les intérêts de l’utilisation d’une théorie novatrice en droit. La théorie des systèmes dynamiques complexes offre les outils d’une réflexion sur le droit, fondée sur les interactions du droit avec le contexte particulier dans lequel il intervient, la crise, et ses acteurs. La mise en lumière de ces interactions favorise une lecture critique du droit international dans la crise et permet de renouveler l’ontologie de ce droit. Les dynamiques complexes appréhendées et définies par cette théorie sont utiles lorsqu’il s’agit d’expliquer les atouts et les limites de l’action normative du Conseil. Par ailleurs en renouvellant l’ontologie du droit, la théorie des systèmes dynamiques complexes facilite une lecture prospective de l’action normative du Conseil et insiste sur le rôle institutionnel du droit.

Microstructure characterization of 316L deformed at high strain rates using EBSD

Specimens from split Hopkinson pressure bar experiments, at strain rates between ~ 1000–9000 s− 1 at room temperature and 500 °C, have been studied using electron backscatter diffraction. No significant differences in the microstructures were observed at different strain rates, but were observed for different strains and temperatures. Size distribution for subgrains with boundary misorientations > 2° can be described as a bimodal lognormal area distribution. The distributions were found to change due to deformation. Part of the distribution describing the large subgrains decreased while the distribution for the small subgrains increased. This is in accordance with deformation being heterogeneous and successively spreading into the undeformed part of individual grains. The variation of the average size for the small subgrain distribution varies with strain but not with strain rate in the tested interval. The mean free distance for dislocation slip, interpreted here as the average size of the distribution of small subgrains, displays a variation with plastic strain which is in accordance with the different stages in the stress-strain curves. The rate of deformation hardening in the linear hardening range is accurately calculated using the variation of the small subgrain size with strain.

Design para a valorização de indústrias regionais: readaptação do cobertor de papa da Guarda

A sociedade está espontaneamente em constante transformação e isso reflete-se na cultura de um povo e no artesanato, sendo primordial o desenvolvimento de produtos que acompanhem essa mudança. O artesanato insere-se de forma natural em ambientes locais, absorvendo e caracterizando a cultura e identidade de uma região, contudo com o passar do tempo tem havido uma deterioração cultural, levando à desvalorização do artesanato e até ao desaparecimento de identidades culturais, de saberes e artes ancestrais. O presente projeto tem como objetivo a valorização e readaptação do Cobertor de Papa, um produto artesanal fabricado exclusivamente na Guarda, através da simbiose entre o design e o artesanato. O design tem vindo a afirmar-se com uma mais-valia, ou seja um instrumento imprescindível para a afirmação do artesanato. Esta ligação entre o design e o artesanato é vital para a preservação e revitalização das técnicas e saberes obsoletos, assim como para o desenvolvimento de produtos contemporâneos, impregnados de memórias e cultura, mas que respondem às necessidades da sociedade atual. É o saber e a técnica do artesão conexo com a criatividade e inovação do design, que diferencia estes produtos dos produtos industriais, massificados, sem identidade, tornandoos únicos, especiais e próprios. Pretende-se assim criar novos produtos, com base no Cobertor de Papa, salvaguardando a produção artesanal, as raízes culturais deste povo, através dos caminhos da inovação e criatividade. Evidenciando sempre a valorização, a preservação e revitalização das técnicas utilizadas nesta arte e transmitindo os conhecimentos para que estes não se percam no tempo. Há uma intensão de ajudar a posicionar o Cobertor de Papa no mercado atual, satisfazendo as necessidades da sociedade e do consumidor vigente, com o intuito de enaltecer esta arte, bem como as suas estirpes e essência.

Augmentation de l'immunogénicité de la nucléoprotéine de l'influenza par multimérisation in vitro

Les travaux effectués au cours de ce mémoire ont permis de développer une alternative aux vaccins présentement utilisés contre le virus de l’influenza. Nous avons utilisé la nucléoprotéine (NP) de l’influenza comme base vaccinale puisque cette protéine est conservée chez les souches d’influenza A et qu’elle possède un potentiel de protection croisée. Nous avons montré que la multimérisation de la NP grâce à un gabarit d’ARN permet d’augmenter son immunogenicité. Cette multimérisation en pseudo-nucléoparticule virale (NLP) a augmenté la réponse humorale et cellulaire spécifique à NP et l’ajout d’un adjuvant (PAL) a permis d’amplifier davantage la réponse humorale contre NP. Une dose du vaccin candidat NLP-PAL n’a pas réussi à protéger des souris contre une infection létale avec une souche homotypique d’influenza. Cependant, des résultats avec un régime de deux immunisations montrent des résultats encourageants qui permettent d’espérer une protection envers une infection virale.

Développement et évaluation pré-clinique de nouveaux vaccins inactivés contre l’influenza et suivi de l’évolution des souches virales A/H3N2

Les virus influenza de type A sont des pathogènes respiratoires causant des épidémies saisonnières et des pandémies de manière plus occasionnelles. Au cours d’une saison, 10 à 20 % de la population mondiale est touchée, ce qui constitue un problème majeur de santé publique. Les virus de sous-type A/H3N2 sont associés à une plus forte morbidité et mortalité que les virus de sous-type A/H1N1. La vaccination reste le moyen le plus efficace de contrôler les infections, cependant l’efficacité de ces vaccins est de courte durée et compromise en cas de non-appariemment entre les souches circulantes et vaccinales. La première partie de cette thèse a été consacrée à l’optimisation des vaccins inactivés A/H3N2 en testant de nouveaux adjuvants et de nouvelles voies d’administration chez la souris et le furet. Nous avons démontré que l’adjuvant AS25 semble prometteur pour le développement de vaccins plus efficaces. La seconde partie de cette thèse a été consacrée à suivre l’évolution moléculaire et antigénique des souches A/H3N2 circulantes au Québec entre 2009 et 2011. Notre conclusion est qu’il n’y a pas que le nombre de mutations dans la HA qui est important, en ce sens que la nature et la localisation de ces dernières jouent un rôle clé lors d’une dérive antigénique. Après avoir suivi les souches A/H3N2 sous pression immunitaire, nous avons suivi dans la troisième partie de cette thèse une souche A/H3N2 sous pression d’un nouvel antiviral; le laninamivir. Les antiviraux sont la première ligne de défense en cas de pandémie ou lors d’une épidémie lorsqu’il y a un mésappariemment entre les souches circulante et vaccinale. Notre conclusion est que la réplication de notre mutant est conservé in vitro mais non in vivo. Les différentes expériences effectuées au cours de cette thèse ont permis de suivre l’évolution des souches A/H3N2 et de mettre en œuvre de nouveaux moyens de prévention et de traitement.

Análise da fluência em vigas de concreto armado simplesmente apoiadas usando o método dos elementos finitos

Reinforced concrete creep is a phenomenon of great importance. Despite being appointed as the main cause of several pathologies, its effects are yet considered in a simplified way by the structural designers. In addition to studying the phenomenon in reinforced concrete structures and its current account used in the structural analysis, this paper compares creep strains at simply supported reinforced concrete beams in analytical and in experimental forms with the finite element method (FEM) simulation results. The strains and deflections obtained through the analytical form were calculated with the Brazilian code NBR 6118 (2014) recommendations and the simplified method from CEB-FIP 90 and the experimental results were extracted from tests available in the literature. Finite element simulations are performed using ANSYS Workbench software, using its 3D SOLID 186 elements and the structure symmetry. Analyzes of convergence using 2D PLANE 183 elements are held as well. At the end, it is concluded that FEM analyses are quantitative and qualitative efficient for the estimation of this non-linearity and that the method utilized to obtain the creep coefficients values is sufficiently accurate.

Atividade antimicrobiana de ácidos orgânicos e compostos clorados sobre micro-organismos patogênicos em carne de frango

The current scenario of the Brazilian poultry production is defined by high productivity motivated by exports to markets with elevated levels of sanitary requirement. The work aimed to evaluate the efficacy of chlorinated compounds (chlorine dioxide, dichloro and trichloro) and organic acids (citric, lactic and peracetic acids) in reducing the contamination of poultry by Salmonella spp., mesophiles and enterobacteriaceae. Were isolated 102 strains Salmonella spp. poultry carcass from June to September 2014. Strains were identified by PCR. Was determined the minimum inhibitory concentration (MIC) of antimicrobial compounds for the standard strains of S. Typhimurium, S. Enteritidis and S. Heidelberg. MIC of lactic acid and peracetic acid (20 to 10 g/L) was applied in strains of Salmonella spp. isolated from the slaughter. The MIC of the compounds lactic acid and sodium dichloro was applied in contaminated chiller water with Salmonella (109 CFU/mL) and this was determined Salmonella count in water. Thighs and drumsticks poultry were contaminated with S. Heidelberg (109 UFC/mL) and were applied dichloro (60 mg/L), lactic acid (20 g/L) and sodium hypochlorite (5,0 and 0,5 mg/L) compounds. In the identification by PCR, 93,1% of the strains were identified as Salmonella. For sodium dichloro the MIC was 60 mg/L for 15 minutes to S. Heidelberg and 60 mg/L for 20 minutes for S. Enteritidis. Lactic acid presented MIC of the 5 g/L for 10 minutes to S. Enteritidis 10 g/L for 15 minutes to S. Typhimurium and 20 g/L for 20 minutes to S. Heidelberg. For peracetic acid, MICs were 10 g/L for 10 minutes to S. Typhimurium and S. Heidelberg and 10 g/L for 20 minutes to S. Enteritidis. To citric acid, MICs were 10 g/L for 10 minutes to S. Typhimurium and S. Enteritidis and 25 g/L for 20 minutes to S. Heidelberg. In the isolated Salmonella strains, lactic acid inhibited 97,89% of the strains and peracetic inhibited 100% of the strains. In contaminated chiller water, the compounds reduced the growth of standards strains. When applied to contaminated poultry meat, there was a reduction of Salmonella spp. 1,06 log10 CFU/g relative to the positive control with the use of sodium hypochlorite at 5,0 mg/L, 0,97 log10 CFU/g with dichloro and 0,56 log10 CFU/g with sodium hypochlorite 0,5 mg/L. For mesophiles reduction observed was 0,90 log10 CFU/g relative to the positive control with the use of sodium hypochlorite at 5,0 mg/L, 0,83 log10 CFU/g with dichloro and there isn´t reduction with hypochlorite with sodium 0,5 mg/L. For enterobacteriaceae reduction was 1,0 log10 CFU/g relative to the positive control with the use of sodium hypochlorite at 5,0 mg/L, 0,79 log10 CFU/g with dichloro and 0,22 log10 CFU/g with sodium hypochlorite at 0,5 mg/L. Lactic acid inhibit growth of the microorganisms tested. The data supports the discussions to regulate the use of the technology coadjuvants in the slaughter of poultry.

Effects of Wingwall Configurations on the Behavior of Integral Abutment Bridges

This research includes parametric studies performed with the use of three-dimensional nonlinear finite element models in order to investigate the effects of cantilever wingwall configurations on the behavior of integral abutment bridges located on straight alignment and zero skew. The parametric studies include all three types of cantilever wingwalls; inline, flared, and U-shaped wingwalls. Bridges analyzed vary in length from 100 to 1200 feet. Soil-structure and soil-pile interaction are included in the analysis. Loadings include dead load in combination with temperature loads in both rising and falling temperatures. Plasticity in the integral abutment piles is investigated by means of nonlinear plasticity models. Cracking in the abutments and stresses in the reinforcing steel are investigated by means of nonlinear concrete models. The effects of wingwall configurations are assessed in terms of stresses in the integral abutment piles, cracking in the abutment walls, stresses in the reinforcing steel of abutment walls, and axial forces induced in the steel girders. The models developed are analyzed for three types of soil behind the abutments and wingwalls; dense sand, medium dense sand, and loose sand. In addition, the models consider both the case of presence and absence of predrilled holes at the top nine feet of piles. The soil around the piles below the predrilled holes consists of very stiff clay. The results indicate that for the stresses in the piles, the critical load is temperature contraction and the most critical parameter is the use of predrilled holes. However, for both the stresses in the reinforcing steel and the axial forces induced in the girders, the critical load is temperature expansion and the critical parameter is the bridge length. In addition, the results indicate that the use of cantilever wingwalls in integral abutment bridges results in an increase in the magnitude of axial forces in the steel girders during temperature expansion and generation of pile plasticity at shorter bridge lengths compared to bridges built without cantilever wingwalls.

Inibição de linhagens do complexo Fusarium Graminearum por compostos naturais e sintéticos

Quando produtos alimentícios e especiarias são contaminados por micotoxinas é quase impossível detoxificar utilizando processos usuais da indústria de alimentos ou durante o preparo doméstico. Por isso, controlar o crescimento do fungo e a produção de toxinas é uma demanda para garantir a segurança alimentar. Os agrotóxicos são rotineiramente utilizados como estratégia para proteger as plantas de doenças provocadas pela contaminação fúngica. No entanto, eles estão associados a efeitos adversos ao sistema nervoso central e periférico, têm ação imunodepressora e são cancerígenos. Em virtude disso, o objetivo deste trabalho foi estudar a inibição do desenvolvimento, do potencial toxigênico e da expressão gênica de linhagens do Complexo Fusarium graminearum por compostos naturais comparativamente aos fungicidas azoxistrobina e trifloxistrobina. Do farelo de arroz, foram extraídos o γ-orizanol e os ácidos fenólicos (EFF). Das sementes de nim foram extraídos os ácidos fenólicos (EFN), totalizando três extratos naturais. A capacidade antioxidante dos extratos foi verificada pelo consumo do radical livre DPPH• , capacidade de captura do radical ABTS●+, redução do ferro e inibição da oxidação enzimática. Os mecanismos de inibição de três linhagens de F. graminearum foram avaliados através da determinação de compostos estruturais (glicosamina e ergosterol) e da atividade de enzimas do metabolismo primário (α- amilase e proteases). Foram determinadas as micotoxinas de Fusarium: deoxinivalenol (DON), 15 acetildeoxinivalenol (15AcDON), 3 acetildeoxinivalenol (3AcDON), nivalenol (NIV) e zearalenona (ZEA). A expressão dos genes Tri1 e Tri5 foi determinada a fim de verificar se ocorria modificação da expressão gênica nas linhagens do Complexo F. graminearum ocasionada pela presença dos antifúngicos. O EFF apresenta atividade antioxidante destacada em relação aos demais extratos naturais para inibir a iniciação do processo, a propagação do radical livre e a catálise enzimática. A presença dos compostos naturais mostrou efeito promissor como antifúngico para as linhagens, sendo que a concentração necessária para inibir 50% do crescimento radial das colônias (MIC50) foi 0,9 g/kg para γ-orizanol; 0,032 g/kg para EFF e 0,037 g/kg para EFN, portanto, os extratos fenólicos são mais eficazes para inibição de F. graminearum do que o γ-orizanol. Os extratos naturais afetaram as atividades das enzimas α-amilase e proteases. Também ocorreu a redução da formação de componentes estruturais (glicosamina e ergosterol). Os extratos naturais se destacaram pela capacidade de inibição de micotoxinas produzidas pela biomassa fúngica, com destaque para o EFN sobre a produção de DON, 15AcDON, 3AcDON e ZEA. Sendo assim, é possível dizer que há uma relação direta entre a atividade antioxidante na inibição do fungo e na manifestação do seu potencial toxigênico. Além disso, esse estudo contribuiu com a elucidação do mecanismo de ação dos antifúngicos naturais estudados. Ocorre modificação na expressão gênica quando a linhagem é submetida ao tratamento com antifúngico, havendo uma relação direta entre a expressão do gene Tri5 e a produção de DON.

Antimicrobial effect of polymeric biomaterials for bone infection treatment

Dissertação de mestrado em Bioquímica, apresentada à Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa, 2016.

Dietary supplements based on borututu: wich is the most suitable choice for bioactive purposes?

Borututu ( Cochlospermum angolensis Welw.) is a widespread tree in Angola used since antiquity by traditional healers for the prevention and treatment of hepatic diseases and for the prophylaxis of malaria [1]. This plant is mostly consumed as infusions but is also available as dietary supplements, such as piiis, capsules, and syrups, among others. In the present study, the aim was to evaluate the proximate composition and energetic contribution of borututu as weii as its composition in hydrophilic (sugars and organic acids) and lipophilic (fatty acids and tocopherols) compounds, given the fact that this plant is directly introduced in some dietary supplements. Furthermore, the bioactivity (antioxidant, hepatoprotective and antimicrobial activities) of three different formulations of borututu (infusion, pills, and syrup) was assessed and compared, and since plant beneficial properties are often ascribed to phenolic compounds [2], the phenolic profile of the formulations was also analysed. Carbohydrates (88 g/100 g) and fat (2.5 g/100 g) were the major and tl1e minor components of the studied borututu dry barks, respectively, with an energetic contribution of 384 kcal/100 g. Fructose was the most abundant sugar (1.3 g/100 g), foilowed by sucrose, trehalose and glucose (1.1, 0.98 and 0.79 g/100 g, respectively). Oxalic (0.70 g/100 g), malic (0.63 g/100 g) and citric (0.57 g/100 g) acids were present in higher amounts but shikimic and fumaric acids were also detected. Among the fatty acids found in borututu, a prevalence of saturated fatty acids (SF A; 48.2%) was observed, whereas polyunsaturated (PUFA) and monounsaturated (MUFA) fatty acids were detected in relative percentages of 30.9% and 20.8%, respectively. P-tocopherol was the most abundant of the four isoforms found in the sample, foiiowed by o-, a- and y-tocopherol, present in concentrations of 597,43, 3.7 and 2.0 g/100 g, respectively. Borututu infusion revealed the highest antioxidant activity, with EC50 values ranging from 20 to 600 J.lg/mL and was the only formulation inhibiting the growth of an HepG2 ceii line, with a Gl5o value of 146 J.lg/mL. This formulation.also revealed the best antimicrobial capacity and proved to be able to inhibit the growth of Escherichia coli, E. coli ESBL, Staphylococcus aureus and Pseudomonas aeruginosa, with MIC values of 50, 6.2, 1.6 and 25 mg!mL, respectively. Pills revealed activity against some of the studied bacterial strains and the syrup did not reveal antimicrobial activity at the studied concentration. Eilagic acids, methyl ellagic acids, eucaglobulinlglobulusin B and (epi)gaiiocatechin-0-gallate were the compounds present in all the different formulations. The highest concentration of phenolic compounds was found in the infusion extract. Protocatechuic acid was the most abundant phenolic compound in the infusions, the only preparation where it was detected, whereas ( epi)gaiiocatechin- 0-gallate was the main phenolic in the pills and eucaglobulinlglobulusin in the syrup. In a general way, borututu proved to be a good source of phytochemicals such as phenolic compounds, with the infusions revealing the best bioactive properties.

Diagnosis of vibriosis in the era of genomics: lessons from invertebrates

Global changes linked to increases in temperature and ocean acidification, but also to more direct anthropogenic influences such as aquaculture, have caused a worldwide increase in the reports of Vibrio-associated illnesses affecting humans and also animals such as shrimp and molluscs. Investigation of the emergence of Vibrio pathogenesis events requires the analysis of microbial evolution at the gene, genome and population levels, in order to identify genomic modifications linked to increased virulence, resistance and/or prevalence, or to recent host shift. From a more applied point of view, the elucidation of virulence mechanisms is a prerequisite to devising prophylactic methods to fight infectious agents. In comparison with human pathogens, fairly little is known about the requirements for virulence in vibrios pathogenic to animals. However, the advent of genome sequencing, especially next-generation technologies,the possibility of genetically manipulating most of the Vibrio strains, and the recent availability of standardised animals for experimental infections have now compensated for the considerable delay in advancement of the knowledge of non-model pathogens such as Vibrio and have led to new scientific questions.

Desenvolvimento de bloco de vedação com barita na composição de partida para blindagem de radiação X

This work main objective is to study the use of bricks in barium X-rays rooms in order to contribute to the optimization of shielding rooms diagnosis. The work was based on experimental measurements of X-ray attenuation (40 to 150 kV), using ceramic seal bearing the incorporation of barium sulfat (BaSO4). Different formulations were studied in three different firing temperatures and evaluated for incorporation in the ceramic body. The composition of 20% of barite processed at a temperature of 950 ° C showed better physical and mechanical properties, is considered the most suitable for the purpose of this work. Were produced bricks sealing composition formulated based on that presented the best technological features. These blocks were tested physically as a building material and wall protective barrier. Properties such as visual, deviation from the square, face flatness, water absorption and compressive strength were evaluated for all the blocks produced. The behavior of this material as attenuator for X-rays was investigated by experimental results which take into account mortar manufacturers barium through the different strains and compared with the reference material (Pb). The simulation results indicated that the ceramic block barium shows excellent properties of attenuation equivalence lead taking into account the energy used in diagnostic X-ray

A non-enteric adenovirus A12 gastroenteritis outbreak in Rio de Janeiro, Brazil

A gastroenteritis outbreak that occurred in 2013 in a low-income community in Rio de Janeiro was investigated for the presence of enteric viruses, including species A rotavirus (RVA), norovirus (NoV), astrovirus (HAstV), bocavirus (HBoV), aichivirus (AiV), and adenovirus (HAdV). Five of nine stool samples (83%) from patients were positive for HAdV, and no other enteric viruses were detected. Polymerase chain reaction products were sequenced and subjected to phylogenetic analysis, which revealed four strains and one strain of non-enteric HAdV-A12 and HAdV-F41, respectively. The HAdV-A12 nucleotide sequences shared 100% nucleotide similarity. Viral load was assessed using a TaqMan real-time PCR assay. Stool samples that were positive for HAdV-A12 had high viral loads (mean 1.9 X 107 DNA copies/g stool). All four patients with HAdV-A12 were < 25 months of age and had symptoms of fever and diarrhoea. Evaluation of enteric virus outbreaks allows the characterisation of novel or unique diarrhoea-associated viruses in regions where RVA vaccination is routinely performed.