Mechanical behaviour of AISiC nano composites produced by Ball Milling and Spark Plasma Sintering

Neste trabalho foram produzidos nanocompósitos de AlSiC misturando alumínio puro com nano partículas de SiC com diâmetro de 45 – 55 nm, usando, de forma sequencial, a técnica da metalurgia do pó e a compactação por “ Spark Plasma Sintering”. O compósito obtido apresentava grãos com 100 nm de diâmetro, encontrandose as partículas de SiC localizadas, principalmente, nas fronteiras de grão. O nanocompósito sob a forma de provetes cilíndricos foi submetido a testes de compressão uniaxial e a testes de nanoindentação para analisar a influência das nanopartículas de SiC, da fração volúmica de ácido esteárico e do tempo de moagem, nas propriedades mecânicas do material. Para efeitos de comparação, utilizouse o comportamento mecânico do Al puro processado em condições similares e da liga de alumínio AA1050O. A tensão limite de elasticidade do nanocompósito com 1% Vol./Vol. de SiC é dez vezes superior à do AA1050. O refinamento de grão à escala nano constitui o principal mecanismo de aumento de resistência mecânica. Na realidade, o Al nanocristalino sem reforço de partículas de SiC, apresenta uma tensão limite de elasticidade sete vezes superior à da liga AA1050O. A adição de 0,5 % Vol./Vol. e de 1 % Vol./Vol. de SiC conduzem, respetivamente, ao aumento da tensão limite de elasticidade em 47 % e 50%. O aumento do tempo de moagem e a adição de ácido esteárico ao pó durante a moagem conduzem apenas a um pequeno aumento da tensão de escoamento. A dureza do material medida através de testes de nanoindentação confirmaram os dados anteriores. A estabilidade das microestruturas do alumínio puro e do nanocompósito AlSiC, foi testada através de recozimento de restauração realizado às temperaturas de 150 °C e 250 °C durante 2 horas. Aparentemente, o tratamento térmico não influenciou as propriedades mecânicas dos materiais, excepto do nanocompósito com 1 % Vol./Vol. de SiC restaurado à temperatura de 250 °C, para o qual se observou uma redução da tensão limite de elasticidade na ordem dos 13 %. No alumínio nanocristalino, a tensão de escoamento é controlada pelo efeito de HallPetch. As partículas de SiC, são segregadas pelas fronteiras do grão e não contribuem para o aumento de resistência mecânica segundo o mecanismo de Orowan. Alternativamente, as nanopartículas de SiC constituem um reforço das fronteiras do grão, impedindo o seu escorregamento e estabilizando a nanoestrutura. Deste modo, as propriedades mecânicas do alumínio nanocristalino e do nanocompósito de AlSiC poderão estar relacionadas com a facilidade ou dificuldade do escorregamento das fronteiras de grão, embora não seja apresentada prova explícita deste mecanismo à temperatura ambiente.

Effect of light on ex situ production of symbiotic corals

The increasing interest in coral culture for biotechnological applications, to supply the marine aquarium trade, or for reef restoration programs, has prompted researchers to optimize coral culture protocols, with emphasis to ex situ production. When cultured ex situ, the growth performance of corals can be influenced by several physical, chemical and biological parameters. For corals harbouring zooxanthellae, light is one of such key factors, as it can influence the photosynthetic performance of these endosymbionts, as well as coral physiology, survival and growth. The economic feasibility of ex situ coral aquaculture is strongly dependent on production costs, namely those associated with the energetic needs directly resulting from the use of artificial lighting systems. In the present study we developed a versatile modular culture system for experimental coral production ex situ, assembled solely using materials and equipment readily available from suppliers all over the world; this approach allows researchers from different institutions to perform truly replicated experimental set-ups, with the possibility to directly compare experimental results. Afterwards, we aimed to evaluate the effect of contrasting Photosynthetically Active Radiation (PAR) levels, and light spectra emission on zooxanthellae photochemical performance, through the evaluation of the maximum quantum yield of PSII (Fv/Fm) (monitored non-invasively and non-destructively through Pulse Amplitude Modulation fluorometry, PAM), chlorophyll a content (also determined non-destructively by using the spectral reflectance index Normalized Difference Vegetation Index, NDVI), photosynthetic and accessory pigments, number of zooxanthellae, coral survival and growth. We studied two soft coral species, Sarcophyton cf. glaucum and Sinularia flexibilis, as they are good representatives of two of the most specious genera in family Alcyoniidae, which include several species with interest for biotechnological applications, as well as for the marine aquarium trade; we also studied two commercially important scleractinian corals: Acropora formosa and Stylophora pistillata. We used different light sources: hydrargyrum quartz iodide (HQI) lamps with different light color temperatures, T5 fluorescent lamps, Light Emitting Plasma (LEP) and Light Emitting Diode (LED). The results achieved revealed that keeping S. flexibilis fragments under the same light conditions as their mother colonies seems to be photobiologically acceptable for a short-term husbandry, notwithstanding the fact that they can be successfully stocked at lower PAR intensities. We also proved that low PAR intensities are suitable to support the ex situ culture S. cf. glaucum in captivity at lower production costs, since the survival recorded during the experiment was 100%, the physiological wellness of coral fragments was evidenced, and we did not detect significant differences in coral growth. Finally, we concluded that blue light sources, such as LED lighting, allow a higher growth for A. formosa and S. pistillata, and promote significant differences on microstructure organization and macrostructure morphometry in coral skeletons; these findings may have potential applications as bone graft substitutes for veterinary and/or other medical uses. Thus, LED technology seems to be a promising option for scleractinian corals aquaculture ex situ.

Abordagens ao ensino e práticas de questionamento no ensino superior

A emergência de uma nova Sociedade baseada na Informação e no Conhecimento despoletou transformações pedagógicas profundas nas instituições de Ensino Superior. Esta agenda para a inovação, no sentido de um ensino mais centrado nos alunos e no desenvolvimento de competências, tem exigido um esforço acrescido de toda a comunidade académica e, sobretudo, por parte dos professores universitários. Num contexto de recetividade para a mudança, mas com dificuldade de operacionalização da mesma, este estudo visa contribuir para a compreensão e superação de fatores que parecem dificultar a transposição da inovação para as práticas de ensino-aprendizagem correntes, através de duas frentes investigativas: i) caracterizar os docentes na sua dimensão conceptual, o que pensam e o que os motiva, e na sua dimensão prática, isto é, as estratégias didáticas que adotam e adaptam; e ainda, ii) criar oportunidades de concretização de inovação através do desenho de estratégias promotoras de questionamento dos alunos, e também dos docentes. A formulação de questões, e a procura de respostas, é reconhecida como sendo fundamental no desenvolvimento e na aplicação de competências centrais, tais como o pensamento crítico e reflexivo, sendo igualmente importante na resolução de problemas. Assim, numa articulação dinâmica entre conhecer, compreender e agir, a investigação envolveu uma colaboração próxima com um grupo de quatro docentes universitários, ao longo de dois anos letivos consecutivos (2009/2010 e 2010/2011), na conceptualização e implementação de diversas estratégias didáticas impulsionadoras do questionamento dos alunos, promovendo-se igualmente o questionamento reflexivo nos docentes. O trabalho foi desenvolvido no contexto de duas unidades curriculares semestrais (Microbiologia e Temas e Laboratórios em Biologia), destinadas sobretudo a alunos do primeiro ano. Enquanto estudo longitudinal de casos múltiplos, com características etnográficas e de investigação-ação, o trabalho de campo envolveu a combinação de diversos métodos de recolha de dados. Realizaram-se várias observações de aulas, assim como entrevistas semi-estruturadas, aos quatro professores colaboradores, e a alguns dos seus alunos. Aplicou-se ainda, em momentos específicos da investigação, uma versão portuguesa do Approaches to Teaching Inventory – ATI (Trigwell, Prosser, & Ginns, 2005) aos docentes. Recolheram-se também todos os documentos escritos produzidos pelos alunos e pelos professores no âmbito da investigação. Todo o desenho investigativo, assim como a análise dos dados, nomeadamente análise de conteúdo e análise documental, encontra-se fundamentado na literatura teórico-empírica de três áreas da especialidade: estudo do questionamento, análise do discurso oral em contexto de aulas de ciências e estudo das conceções e práticas de ensino dos docentes universitários, destacando-se nesta última a linha investigativa das Abordagens ao Ensino. Os resultados obtidos, assim como a reflexão sobre o percurso investigativo, possibilitaram a obtenção de contributos inovadores e úteis no sentido da promoção de um Ensino Superior de qualidade. Por um lado, são de salientar as evidências recolhidas com os quatro casos (docentes) que apontam para uma natureza integrativa das conceptualizações de ensino, constituindo um contributo teórico relevante para o debate académico desta área. Por outro, foi possível aceder a dinâmicas associadas à formulação de questões por docentes universitários em contexto de aulas teórico-práticas e práticas, através do desenvolvimento e aplicação de um modelo de categorização de questionamento. Por fim, a conjugação de evidências do campo das ‘teorias de ensino’ (observação indireta) com as ‘práticas de ensino’ (observação direta) dos docentes possibilitou a identificação e caracterização de uma possível relação entre Práticas de Questionamento e Abordagens ao Ensino de professores universitários, ampliando desta forma o modelo conceptual de Keith Trigwell e colaboradores (Trigwell, Prosser, & Taylor, 1994). Enquanto investigação híbrida que se orientou por princípios do paradigma interpretativo-naturalista, e, também, do paradigma sócio-crítico, foi igualmente possível identificar um conjunto de recomendações específicas para a inovação e para a reflexividade, no sentido de estimular a comunidade académica, e os professores universitários em particular, a agirem como promotores de estratégias didáticas centradas no desenvolvimento de competências.

Development of open models and tools for seismic risk assessment: application to Portugal

The exponential growth of the world population has led to an increase of settlements often located in areas prone to natural disasters, including earthquakes. Consequently, despite the important advances in the field of natural catastrophes modelling and risk mitigation actions, the overall human losses have continued to increase and unprecedented economic losses have been registered. In the research work presented herein, various areas of earthquake engineering and seismology are thoroughly investigated, and a case study application for mainland Portugal is performed. Seismic risk assessment is a critical link in the reduction of casualties and damages due to earthquakes. Recognition of this relation has led to a rapid rise in demand for accurate, reliable and flexible numerical tools and software. In the present work, an open-source platform for seismic hazard and risk assessment is developed. This software is capable of computing the distribution of losses or damage for an earthquake scenario (deterministic event-based) or earthquake losses due to all the possible seismic events that might occur within a region for a given interval of time (probabilistic event-based). This effort has been developed following an open and transparent philosophy and therefore, it is available to any individual or institution. The estimation of the seismic risk depends mainly on three components: seismic hazard, exposure and vulnerability. The latter component assumes special importance, as by intervening with appropriate retrofitting solutions, it may be possible to decrease directly the seismic risk. The employment of analytical methodologies is fundamental in the assessment of structural vulnerability, particularly in regions where post-earthquake building damage might not be available. Several common methodologies are investigated, and conclusions are yielded regarding the method that can provide an optimal balance between accuracy and computational effort. In addition, a simplified approach based on the displacement-based earthquake loss assessment (DBELA) is proposed, which allows for the rapid estimation of fragility curves, considering a wide spectrum of uncertainties. A novel vulnerability model for the reinforced concrete building stock in Portugal is proposed in this work, using statistical information collected from hundreds of real buildings. An analytical approach based on nonlinear time history analysis is adopted and the impact of a set of key parameters investigated, including the damage state criteria and the chosen intensity measure type. A comprehensive review of previous studies that contributed to the understanding of the seismic hazard and risk for Portugal is presented. An existing seismic source model was employed with recently proposed attenuation models to calculate probabilistic seismic hazard throughout the territory. The latter results are combined with information from the 2011 Building Census and the aforementioned vulnerability model to estimate economic loss maps for a return period of 475 years. These losses are disaggregated across the different building typologies and conclusions are yielded regarding the type of construction more vulnerable to seismic activity.

Model of access to natural language sources in electronic government

For the actual existence of e-government it is necessary and crucial to provide public information and documentation, making its access simple to citizens. A portion, not necessarily small, of these documents is in an unstructured form and in natural language, and consequently outside of which the current search systems are generally able to cope and effectively handle. Thus, in thesis, it is possible to improve access to these contents using systems that process natural language and create structured information, particularly if supported in semantics. In order to put this thesis to test, this work was developed in three major phases: (1) design of a conceptual model integrating the creation of structured information and making it available to various actors, in line with the vision of e-government 2.0; (2) definition and development of a prototype instantiating the key modules of this conceptual model, including ontology based information extraction supported by examples of relevant information, knowledge management and access based on natural language; (3) assessment of the usability and acceptability of querying information as made possible by the prototype - and in consequence of the conceptual model - by users in a realistic scenario, that included comparison with existing forms of access. In addition to this evaluation, at another level more related to technology assessment and not to the model, evaluations were made on the performance of the subsystem responsible for information extraction. The evaluation results show that the proposed model was perceived as more effective and useful than the alternatives. Associated with the performance of the prototype to extract information from documents, comparable to the state of the art, results demonstrate the feasibility and advantages, with current technology, of using natural language processing and integration of semantic information to improve access to unstructured contents in natural language. The conceptual model and the prototype demonstrator intend to contribute to the future existence of more sophisticated search systems that are also more suitable for e-government. To have transparency in governance, active citizenship, greater agility in the interaction with the public administration, among others, it is necessary that citizens and businesses have quick and easy access to official information, even if it was originally created in natural language.

Revenue diversification in higher education: the case of Portugal

Socio-economic changes, alterations in societal expectations and new public policies have put pressures on higher education public funding, bringing the issue of funding diversification to the forefront. Income diversification, namely, generation of funds from private, as well as from competitive public sources, has become increasingly important in European higher education due to a complex financial environment and perceived deficit of innovation transfer. Although there are numerous studies about changes in national funding systems and allocation mechanisms, few have focused on diversification of funding sources, especially in the European context, making Portugal no exception. Thus, this study aims at exploring income diversification at the institutional level and its influence on the internal organisational structures. For this purpose two Portuguese public universities were chosen as case studies. The empirical material was collected through semi-structured interviews with top management and middle management of each university and through documentary analysis. Data analysis demonstrated that both universities are in the process of institutionalizing and formalising practices of income diversification, notably by getting more professional in how they are dealing with external stakeholders, such as businesses, local community, and students. However, the study also revealed that there is no formal, organised strategy to deal with income diversification. In general, the universities are reacting to external demands rather than pro-actively exploring opportunities. In this respect, the analysis determined several factors that promote or inhibit income diversification activities. Quality and favourable organizational culture were named by the interviewees as the most relevant factors for successful income diversification. External factors such as legal arrangements and funding conditions were cited as major constraints. This research has also revealed that revenue diversification activities tend to develop along the continuum towards higher sophistication and systematisation of activities that are supported by a powerful infrastructure. Together with efforts at the institutional level, the role of government policies proves to be crucial in providing tools and incentives to higher education institutions and creating a harmonious higher education system.

A performance do silêncio na música contemporânea para oboé

O presente estudo tem como objectivo entender todo o universo anexo à performance do silêncio na música clássica contemporânea. Numa nova perspectiva: o estudo do impacto da ansiedade num músico que se observa e que observa a sua interação com o contexto artístico que o rodeia, são estudadas todas as variáveis com influência directa no acto de percepção e gestão dos momentos de ausência de som. Tendo por base os princípios da investigação qualitativa foi criado um modelo teórico de análise na área dos estudos em performance. Este modelo foi aplicado em dois recitais realizados na Universidade de Aveiro e num concerto do Remix Ensemble da Casa da Música do Porto. O uso de ferramentas de pesquisa: O teste do Cortisol e o uso do colete Vitaljacket®, permitiu observar comportamentos fisiológicos no performer e no público nunca antes relatados. Os principais resultados desta investigação permitem aferir a elevada complexidade do fenómeno perceptivo e performativo do silêncio na música contemporânea. A pesquisa realizada permitiu observar que o silêncio na música contemporânea acontece num contexto de elevada ambiguidade semântica e que a duração dada a este num concerto, está directamente dependente do quadro fisiológico observado no performer no momento do concerto. Foi ainda possível aferir que a repetição, numa data posterior, de um mesmo programa de concerto provoca uma acentuada descida dos níveis de ansiedade no performer e essa descida altera a forma como este gere, em concerto, os momentos de silêncio. As conclusões alcançadas em sede de investigação reforçam a pertinência deste estudo. São postas à prova concepções altamente empíricas sobre a performance dos silêncios em música contemporânea. As asserções formuladas têm impacto a nível pedagógico e didático. São apontadas direcções de investigação futura no sentido da valorização do estudo da gestão dos momentos de silêncio em performance.

Dependable wireless real-time communications for open environments

Wireless communication technologies have become widely adopted, appearing in heterogeneous applications ranging from tracking victims, responders and equipments in disaster scenarios to machine health monitoring in networked manufacturing systems. Very often, applications demand a strictly bounded timing response, which, in distributed systems, is generally highly dependent on the performance of the underlying communication technology. These systems are said to have real-time timeliness requirements since data communication must be conducted within predefined temporal bounds, whose unfulfillment may compromise the correct behavior of the system and cause economic losses or endanger human lives. The potential adoption of wireless technologies for an increasingly broad range of application scenarios has made the operational requirements more complex and heterogeneous than before for wired technologies. On par with this trend, there is an increasing demand for the provision of cost-effective distributed systems with improved deployment, maintenance and adaptation features. These systems tend to require operational flexibility, which can only be ensured if the underlying communication technology provides both time and event triggered data transmission services while supporting on-line, on-the-fly parameter modification. Generally, wireless enabled applications have deployment requirements that can only be addressed through the use of batteries and/or energy harvesting mechanisms for power supply. These applications usually have stringent autonomy requirements and demand a small form factor, which hinders the use of large batteries. As the communication support may represent a significant part of the energy requirements of a station, the use of power-hungry technologies is not adequate. Hence, in such applications, low-range technologies have been widely adopted. In fact, although low range technologies provide smaller data rates, they spend just a fraction of the energy of their higher-power counterparts. The timeliness requirements of data communications, in general, can be met by ensuring the availability of the medium for any station initiating a transmission. In controlled (close) environments this can be guaranteed, as there is a strict regulation of which stations are installed in the area and for which purpose. Nevertheless, in open environments, this is hard to control because no a priori abstract knowledge is available of which stations and technologies may contend for the medium at any given instant. Hence, the support of wireless real-time communications in unmanaged scenarios is a highly challenging task. Wireless low-power technologies have been the focus of a large research effort, for example, in the Wireless Sensor Network domain. Although bringing extended autonomy to battery powered stations, such technologies are known to be negatively influenced by similar technologies contending for the medium and, especially, by technologies using higher power transmissions over the same frequency bands. A frequency band that is becoming increasingly crowded with competing technologies is the 2.4 GHz Industrial, Scientific and Medical band, encompassing, for example, Bluetooth and ZigBee, two lowpower communication standards which are the base of several real-time protocols. Although these technologies employ mechanisms to improve their coexistence, they are still vulnerable to transmissions from uncoordinated stations with similar technologies or to higher power technologies such as Wi- Fi, which hinders the support of wireless dependable real-time communications in open environments. The Wireless Flexible Time-Triggered Protocol (WFTT) is a master/multi-slave protocol that builds on the flexibility and timeliness provided by the FTT paradigm and on the deterministic medium capture and maintenance provided by the bandjacking technique. This dissertation presents the WFTT protocol and argues that it allows supporting wireless real-time communication services with high dependability requirements in open environments where multiple contention-based technologies may dispute the medium access. Besides, it claims that it is feasible to provide flexible and timely wireless communications at the same time in open environments. The WFTT protocol was inspired on the FTT paradigm, from which higher layer services such as, for example, admission control has been ported. After realizing that bandjacking was an effective technique to ensure the medium access and maintenance in open environments crowded with contention-based communication technologies, it was recognized that the mechanism could be used to devise a wireless medium access protocol that could bring the features offered by the FTT paradigm to the wireless domain. The performance of the WFTT protocol is reported in this dissertation with a description of the implemented devices, the test-bed and a discussion of the obtained results.

Materials and concepts for CO2 lean ironmaking by pyroelectrolysis

The main purpose of this PhD thesis was to provide convincing demonstration for a breakthrough concept of pyroelectrolysis at laboratory scale. One attempted to identify fundamental objections and/or the most critical constraints, to propose workable concepts for the overall process and for feasible electrodes, and to establish the main requirements on a clearer basis. The main effort was dedicated to studying suitable anode materials to be developed for large scale industrial units with molten silicate electrolyte. This concept relies on consumable anodes based on iron oxides, and a liquid Fe cathode, separated from the refractory materials by a freeze lining (solid) layer. In addition, one assessed an alternative concept of pyroelectrolysis with electron blocking membranes, and developed a prototype at small laboratory scale. The main composition of the molten electrolyte was based on a magnesium aluminosilicate composition, with minimum liquidus temperature, and with different additions of iron oxide. One studied the dynamics of devitrification of these melts, crystallization of iron oxides or other phases, and Fe2+/Fe3+ redox changes under laser zone melting, at different pulling rates. These studies were intended to provide guidelines for dissolution of raw materials (iron oxides) in the molten electrolyte, to assess compatibility with magnetite based consumable anodes, and to account for thermal gradients or insufficient thermal management in large scale cells. Several laboratory scale prototype cells were used to demonstrate the concept of pyroelectrolysis with electron blocking, and to identify the most critical issues and challenges. Operation with and without electron blocking provided useful information on transport properties of the molten electrolyte (i.e., ionic and electronic conductivities), their expected dependence on anodic and cathodic overpotentials, limitations in faradaic efficiency, and onset of side electrochemical reactions. The concept of consumable anodes was based on magnetite and derived spinel compositions, for their expected redox stability at high temperatures, even under oxidising conditions. Spinel compositions were designed for prospective gains in refractoriness and redox stability in wider ranges of conditions (T, pO2 and anodic overpotentials), without excessive penalty for electrical conductivity, thermomechanical stability or other requirements. Composition changes were also mainly based on components of the molten aluminosilicate melt, to avoid undue contamination and to minimize the dissolution rate of consumable anodes. Additional changes in composition were intended for prospective pyroelectrolysis of Fe alloys, with additions of different elements (Cr, Mn, Ni, Ti).

Avaliação da vulnerabilidade sísmica de edifícios escolares

A grande motivação para este trabalho resultou na avaliação da vulnerabilidade sísmica das escolas básicas e secundárias que fazem parte integrante do parque escolar de Portugal Continental. Apesar de até ao momento apenas se terem estudado a vulnerabilidade de algumas escolas em algumas zonas particulares do nosso país, para este trabalho de investigação tivemos uma ambição muito maior e obviamente fizemos um esforço muito maior. Estabelecemos assim como meta, a avaliação de todo o parque escolar. Embora todo o parque escolar possua na ordem das três centenas de escolas em todo o território nacional e sendo este projeto de reabilitação, um projeto com a duração de 2007 a 2015. Em 2011, por motivos da crise económica, todo o projeto congelou sendo reabilitadas até à data cerca de apenas um terço das escolas. Esta quantidade foi o número de escolas que avaliamos em todo o país. As escolas, sendo edifícios públicos com uma importância fundamental, tanto pela elevada concentração de jovens, como pela função essencial como centros de aprendizagem para as gerações vindouras, como também pela ameaça que representam na eventualidade dum cenário sísmico pela enorme densidade de utilizadores, e pela vantagem de nesse cenário de catástrofe a importância estrutural ser superior em relação à maior parte dos edifícios correntes, devidamente demonstrado pelos argumentos enumerados, consequentemente as escolas podem servir como instalações de proteção civil perante uma catástrofe sísmica para apoio das populações circundantes afetadas. Portanto para cada uma das escolas cordialmente fornecidas pelo Parque Escolar, E.P.E., foi feito um estudo exaustivo e muito individual de cada uma das escolas, onde cada análise foi desenvolvida por uma metodologia simplificada, sendo cada análise sempre individual, e nunca tendo sida aplicada em série, este fator melhora substancialmente a eficácia da avaliação para a quantificação das vulnerabilidades e da determinação do grau de dano e das frações de perda para os requisitos fundamentais de limitação de danos, de não colapso, e de colapso iminente que correspondem a ações com períodos de retorno de 95, 475 e 975 anos. Este trabalho é fundamental para as entidades competentes terem a consciência da vulnerabilidade das escolas secundárias, para puderem atuar a nível estrutural e diminuir assim a vulnerabilidade sísmica, e mesmo que por impossibilidade económica o poder governamental não intervenha, então pode e principalmente deve, elaborar planos de emergência tanto com engenheiros civis qualificados como com a total colaboração das corporações de bombeiros que fazem parte das forças de operação e socorro da Autoridade Nacional de Proteção Civil (ANPC).

Ferroelectric : CNTs structures fabrication for advanced functional nano devices

This work is about the combination of functional ferroelectric oxides with Multiwall Carbon Nanotubes for microelectronic applications, as for example potential 3 Dimensional (3D) Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Miniaturized electronics are ubiquitous now. The drive to downsize electronics has been spurred by needs of more performance into smaller packages at lower costs. But the trend of electronics miniaturization challenges board assembly materials, processes, and reliability. Semiconductor device and integrated circuit technology, coupled with its associated electronic packaging, forms the backbone of high-performance miniaturized electronic systems. However, as size decreases and functionalization increases in the modern electronics further size reduction is getting difficult; below a size limit the signal reliability and device performance deteriorate. Hence miniaturization of siliconbased electronics has limitations. On this background the Road Map for Semiconductor Industry (ITRS) suggests since 2011 alternative technologies, designated as More than Moore; being one of them based on carbon (carbon nanotubes (CNTs) and graphene) [1]. CNTs with their unique performance and three dimensionality at the nano-scale have been regarded as promising elements for miniaturized electronics [2]. CNTs are tubular in geometry and possess a unique set of properties, including ballistic electron transportation and a huge current caring capacity, which make them of great interest for future microelectronics [2]. Indeed CNTs might have a key role in the miniaturization of Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Moving from a traditional two dimensional (2D) design (as is the case of thin films) to a 3D structure (based on a tridimensional arrangement of unidimensional structures) will result in the high reliability and sensing of the signals due to the large contribution from the bottom electrode. One way to achieve this 3D design is by using CNTs. Ferroelectrics (FE) are spontaneously polarized and can have high dielectric constants and interesting pyroelectric, piezoelectric, and electrooptic properties, being a key application of FE electronic memories. However, combining CNTs with FE functional oxides is challenging. It starts with materials compatibility, since crystallization temperature of FE and oxidation temperature of CNTs may overlap. In this case low temperature processing of FE is fundamental. Within this context in this work a systematic study on the fabrication of CNTs - FE structures using low cost low temperature methods was carried out. The FE under study are comprised of lead zirconate titanate (Pb1-xZrxTiO3, PZT), barium titanate (BaTiO3, BT) and bismuth ferrite (BiFeO3, BFO). The various aspects related to the fabrication, such as effect on thermal stability of MWCNTs, FE phase formation in presence of MWCNTs and interfaces between the CNTs/FE are addressed in this work. The ferroelectric response locally measured by Piezoresponse Force Microscopy (PFM) clearly evidenced that even at low processing temperatures FE on CNTs retain its ferroelectric nature. The work started by verifying the thermal decomposition behavior under different conditions of the multiwall CNTs (MWCNTs) used in this work. It was verified that purified MWCNTs are stable up to 420 ºC in air, as no weight loss occurs under non isothermal conditions, but morphology changes were observed for isothermal conditions at 400 ºC by Raman spectroscopy and Transmission Electron Microscopy (TEM). In oxygen-rich atmosphere MWCNTs started to oxidized at 200 ºC. However in argon-rich one and under a high heating rate MWCNTs remain stable up to 1300 ºC with a minimum sublimation. The activation energy for the decomposition of MWCNTs in air was calculated to lie between 80 and 108 kJ/mol. These results are relevant for the fabrication of MWCNTs – FE structures. Indeed we demonstrate that PZT can be deposited by sol gel at low temperatures on MWCNTs. And particularly interesting we prove that MWCNTs decrease the temperature and time for formation of PZT by ~100 ºC commensurate with a decrease in activation energy from 68±15 kJ/mol to 27±2 kJ/mol. As a consequence, monophasic PZT was obtained at 575 ºC for MWCNTs - PZT whereas for pure PZT traces of pyrochlore were still present at 650 ºC, where PZT phase formed due to homogeneous nucleation. The piezoelectric nature of MWCNTs - PZT synthesised at 500 ºC for 1 h was proved by PFM. In the continuation of this work we developed a low cost methodology of coating MWCNTs using a hybrid sol-gel / hydrothermal method. In this case the FE used as a proof of concept was BT. BT is a well-known lead free perovskite used in many microelectronic applications. However, synthesis by solid state reaction is typically performed around 1100 to 1300 ºC what jeopardizes the combination with MWCNTs. We also illustrate the ineffectiveness of conventional hydrothermal synthesis in this process due the formation of carbonates, namely BaCO3. The grown MWCNTs - BT structures are ferroelectric and exhibit an electromechanical response (15 pm/V). These results have broad implications since this strategy can also be extended to other compounds of materials with high crystallization temperatures. In addition the coverage of MWCNTs with FE can be optimized, in this case with non covalent functionalization of the tubes, namely with sodium dodecyl sulfate (SDS). MWCNTs were used as templates to grow, in this case single phase multiferroic BFO nanorods. This work shows that the use of nitric solvent results in severe damages of the MWCNTs layers that results in the early oxidation of the tubes during the annealing treatment. It was also observed that the use of nitric solvent results in the partial filling of MWCNTs with BFO due to the low surface tension (<119 mN/m) of the nitric solution. The opening of the caps and filling of the tubes occurs simultaneously during the refluxing step. Furthermore we verified that MWCNTs have a critical role in the fabrication of monophasic BFO; i.e. the oxidation of CNTs during the annealing process causes an oxygen deficient atmosphere that restrains the formation of Bi2O3 and monophasic BFO can be obtained. The morphology of the obtained BFO nano structures indicates that MWCNTs act as template to grow 1D structure of BFO. Magnetic measurements on these BFO nanostructures revealed a week ferromagnetic hysteresis loop with a coercive field of 956 Oe at 5 K. We also exploited the possible use of vertically-aligned multiwall carbon nanotubes (VA-MWCNTs) as bottom electrodes for microelectronics, for example for memory applications. As a proof of concept BiFeO3 (BFO) films were in-situ deposited on the surface of VA-MWCNTs by RF (Radio Frequency) magnetron sputtering. For in situ deposition temperature of 400 ºC and deposition time up to 2 h, BFO films cover the VA-MWCNTs and no damage occurs either in the film or MWCNTs. In spite of the macroscopic lossy polarization behaviour, the ferroelectric nature, domain structure and switching of these conformal BFO films was verified by PFM. A week ferromagnetic ordering loop was proved for BFO films on VA-MWCNTs having a coercive field of 700 Oe. Our systematic work is a significant step forward in the development of 3D memory cells; it clearly demonstrates that CNTs can be combined with FE oxides and can be used, for example, as the next 3D generation of FERAMs, not excluding however other different applications in microelectronics.

Seamless integration of heterogeneous networks in multicast environments

Nowadays, communication environments are already characterized by a myriad of competing and complementary technologies that aim to provide an ubiquitous connectivity service. Next Generation Networks need to hide this heterogeneity by providing a new abstraction level, while simultaneously be aware of the underlying technologies to deliver richer service experiences to the end-user. Moreover, the increasing interest for group-based multimedia services followed by their ever growing resource demands and network dynamics, has been boosting the research towards more scalable and exible network control approaches. The work developed in this Thesis enables such abstraction and exploits the prevailing heterogeneity in favor of a context-aware network management and adaptation. In this scope, we introduce a novel hierarchical control framework with self-management capabilities that enables the concept of Abstract Multiparty Trees (AMTs) to ease the control of multiparty content distribution throughout heterogeneous networks. A thorough evaluation of the proposed multiparty transport control framework was performed in the scope of this Thesis, assessing its bene ts in terms of network selection, delivery tree recon guration and resource savings. Moreover, we developed an analytical study to highlight the scalability of the AMT concept as well as its exibility in large scale networks and group sizes. To prove the feasibility and easy deployment characteristic of the proposed control framework, we implemented a proof-of-concept demonstrator that comprehends the main control procedures conceptually introduced. Its outcomes highlight a good performance of the multiparty content distribution tree control, including its local and global recon guration. In order to endow the AMT concept with the ability to guarantee the best service experience by the end-user, we integrate in the control framework two additional QoE enhancement approaches. The rst employs the concept of Network Coding to improve the robustness of the multiparty content delivery, aiming at mitigating the impact of possible packet losses in the end-user service perception. The second approach relies on a machine learning scheme to autonomously determine at each node the expected QoE towards a certain destination. This knowledge is then used by di erent QoE-aware network management schemes that, jointly, maximize the overall users' QoE. The performance and scalability of the control procedures developed, aided by the context and QoE-aware mechanisms, show the advantages of the AMT concept and the proposed hierarchical control strategy for the multiparty content distribution with enhanced service experience. Moreover we also prove the feasibility of the solution in a practical environment, and provide future research directions that bene t the evolved control framework and make it commercially feasible.

A Agenda 21 local e o desenvolvimento sustentável em Portugal : que perspetivas?

Assumindo a sociedade atual o paradigma do desenvolvimento sustentável como modelo capaz de garantir uma gestão equilibrada dos recursos atuais que não comprometa o futuro das futuras gerações, é fundamental compreender o instrumento da Agenda 21 Local (A21L), ferramenta saída da Conferência do Rio, em 1992, que se apresenta como uma resposta internacional aos objetivos da sustentabilidade. Ao constituir-se como país signatário da Declaração do Rio, Portugal assumiu o compromisso de cooperar internacionalmente para a aplicação deste instrumento, no esforço comum de unir a proteção do ambiente com o desenvolvimento económico e social. Verifica-se que a resposta de Portugal, em matéria de A21L, foi pouco conseguida, marcada por um arranque ténue, desconcertado e disperso a que acresce o caráter dúbio que caracterizou a natureza dos primeiros processos e que, no quadro internacional, atira Portugal para o grupo de países europeus que mais tardiamente conseguiram responder ao apelo da comunidade internacional no que se refere à implementação de A21L. Neste âmbito, esta dissertação visa aprofundar o conhecimento cientifico sobre este instrumento no quadro das experiências de Agenda 21 Local implementadas no território português. O trabalho procurou examinar os objetivos, características e resultados dos processos de Agenda, dando atenção aos elementos individuais que marcaram cada um e, igualmente, avaliando as repercussões que estes tiveram no todo nacional. O estudo incidiu na dinâmica espaciotemporal das Agendas21L, no território nacional, e na análise integrativa de indicadores físicos, sociais e económicos que permitiram compreender as especificidades e os contrastes verificados nos processos implementados e desenvolvidos. Na investigação não foram, igualmente, negligenciadas questões históricas, políticas e culturais, sabendose da importância que estes vários domínios configuram no caso português. O trabalho contou com uma investigação assente na seguinte metodologia: i) Revisão da literatura e recolha de dados bibliográficos sobre a temática da Agenda 21 Local; ii) Levantamento de informação, através de um inquérito por questionário, dirigido a todas as localidades do País, onde decorrem Agendas 21 Local, a fim de complementar informação já processada; iii) Pesquisa direta de dados no terreno que envolveu a utilização de procedimentos de teor quantitativo (inquérito por questionário) e de teor qualitativo (entrevistas), relativamente ao caso de estudo (Agenda 21 Local de Mindelo); iv) Tratamento e análise dos resultados obtidos através da confrontação da perspetiva teórica com a prática com a consequente elaboração de conclusões fundamentadas pela confrontação dos dados com as hipóteses. Para além de se tratar do caso pioneiro de A21L com início no poder mais próximo do cidadão (respeitando um dos princípios inerentes a este instrumento – o princípio da subsidiariedade), afirmou-se, igualmente, como um caso de referência em matéria de coesão e mobilização dos cidadãos locais para os problemas locais existentes. Os resultados empíricos da investigação identificam uma série de dificuldades que condicionaram o arranque e progresso das A21L. Desde logo, a inabilidade dos poderes políticos locais em trabalharem com um modelo que rompe com as típicas e tradicionais formas pré-concebidas de fazer política, isto é, com as práticas instituídas dos políticos fazerem “política” para os cidadãos e não “com” os cidadãos. O próprio desconhecimento do poder político local quanto à natureza de um processo de A21L que evidenciou inaptidão, impreparação e até embaraço para lidar com este instrumento, resultando na necessidade, na grande maioria dos processos desenvolvidos, de serem acompanhados por entidades externas que cooperaram na sua dinamização. Acresce que a nova dinâmica, subjacente à A21L, que desafia os governos locais a mobilizar a participação generalizada dos cidadãos e apela à participação de novos atores (associações, grupos de interesse, ONG e atores sociais, em geral) para a definição de estratégias de desenvolvimento local, não é totalmente aceite pelos vários poderes locais que, não raras vezes, menosprezam a importância dos cidadãos nos momentos de tomada de decisão. A falta de empenho do governo central, em matéria de sustentabilidade, que negligenciou, numa primeira etapa, a figura do poder central na assessoria às entidades locais cerceou o país da existência de uma campanha nacional para a afirmação deste instrumento. A falta/insuficiência de recursos financeiros como resultante da ausência de apoios estatais e a dificuldade na obtenção de fundos da União Europeia configurou-se como um entrave à promoção dos processos ficando as entidades locais e regionais incapazes de ultrapassar a falta de meios imprescindíveis para o desenvolvimento da A21L. O próprio desconhecimento generalizado dos cidadãos sobre a A21L afigura-se como um estigma ao sucesso de qualquer processo com as caraterísticas de um instrumento A21L visto que a participação dos cidadãos é condição sine qua non para a sua operacionalização. Neste quadro, e olhando o futuro, urge a necessidade das autoridades locais criarem modelos de autofinanciamento capazes de garantir a criação, funcionamento e manutenção de infraestruturas económicas e sociais subjacentes aos programas de A21L, assim como o dever do poder político em reforçar a importância da função da informação e da mobilização dos cidadãos em prole do desenvolvimento sustentável, ações indispensáveis para a execução das políticas inerentes à A21L.

O interesse socioeducativo (e as dificuldades) de traduzir em português-espanhol

O Projeto que apresentamos insere-se nos estudos do Mestrado em Tradução Especializada dentro da vertente da Saúde e Ciências da Vida; é por isso que, partindo de um texto/suporte que visa promover uma alimentação saudável nas escolas (manual de referência difundido pelos Ministérios da Educação e Ciência e Ministério da Saúde de Portugal), procedemos à tradução (de português para espanhol) de um conteúdo que suscita, nos nossos dias, um grande interesse socioeducativo e cultural. É preciso destacar que o facto de ter nascido e vivido na Venezuela durante doze anos permitiu-me superar com êxito os meus estudos de espanhol na Licenciatura e no referido Mestrado; mas, ao mesmo tempo, tive que me adaptar, enquanto cidadã portuguesa, ao complexo e inacabado processo de ir interiorizando estas duas línguas – português/espanhol – tão próximas e no entanto com sistemas linguísticos bem distintos. Esta evidência encontra a sua maior justificação no grande capítulo dos erros (de forma e de significado) que consegui detetar e analisar graças à ajuda da minha professora orientadora, ao longo deste meu primeiro trabalho académico (texto traduzido para espanhol). Só agora, depois da minha primeira e “ingénua” tradução desse texto/manual, sou capaz de perceber com toda nitidez a dimensão do erro na atividade tradutora, assim como das suas consequências. Além desta importante reflexão, também o facto de elaborar este projeto permitiu-me abordar um aspeto linguístico da língua espanhola que me cativa pessoalmente (no que me diz respeito): o das variantes lexicais do castelhano nos países hispanofalantes. Não duvido em apontar um outro aspeto fundamental: o esforço de ter tido que corrigir minuciosamente e com rigor esta tarefa tradutora (com os seus respetivos comentários tradutológicos) converteu-se numa fonte de múltiplas satisfações pessoais; são aquelas que têm a ver com o cultivo de valores tais como o esforço, o espírito de superação, o exercício da responsabilidade e o (re)conhecimento da honestidade intelectual, entre outros.

Describing vocal performance of Portuguese cantadeiras of Alto Minho

Portugal has strong musical traditions, which have been perpetrated by decades through folkloristic activities. In folk groups from Alto Minho (north of Portugal), folk singing is mostly performed by cantadeiras, amateur female solo singers who learn this style orally. Their vocal characteristics are distinctive when compared with other regions of the country; however, deep understanding of these vocal practices is still missing. The present work aims at studying Alto Minho cantadeira’s vocal performance in a multidimensional perspective, envisioning social, cultural and physiological understanding of this musical style. Thus, qualitative and quantitative data analyses were carried out, to: (i) describe current performance practices, (ii) explore existent perceptions about most relevant voice features in this region, (iii) investigate physiological and acoustic properties of this style, and (iv) compare this style of singing with other non-classical singing styles of other countries. Dataset gathered involved: 78 groups whose members were telephone interviewed, 13 directors who were asked to fill in a questionnaire on performance practices, 1 cantadeira in a pilot study, 16 cantadeiras in preliminary voice recordings, 77 folk group members in listening tests, and 10 cantadeiras in multichannel recordings, including audio, ELG, air flow and intra-oral pressure signals. Data were analysed through thematic content analysis, descriptive and inferential statistics, hierarchical principal components, and multivariate linear regression models. Most representative voices have a high pitched and loud voice, with a bright timbre, predominance of chest register without excessive effort, and good text intelligibility with regional accent. High representativeness levels were obtained by few cantadeiras; these sing with high levels of subglottal pressure and vocal fold contact quotient, predominance of high spectrum energy and vocal loudness, corroborating indications of prevalence of pressed phonation. These vocal characteristics resemble belting in musical theatre and share similarities with country (USA) and ojikanje (Croatia) singing. Strategies that may contribute to the preservation of this type of singing and the vocal health of current cantadeiras are discussed, pointing at the direction of continuous education among folk groups, following practices that are already adopted elsewhere in Europe.