Novel optical PVC probes for on-site detection/determination of fluoroquinolones in a solid/liquid interface: Application to the determination of Norfloxacin in aquaculture water

A novel optical disposable probe for screening fluoroquinolones in fish farming waters is presented, having Norfloxacin (NFX) as target compound. The colorimetric reaction takes place in the solid/liquid interface consisting of a plasticized PVC layer carrying the colorimetric reagent and the sample solution. NFX solutions dropped on top of this solid-sensory surface provided a colour change from light yellow to dark orange. Several metals were tested as colorimetric reagents and Fe(III) was selected. The main parameters affecting the obtained colour were assessed and optimised in both liquid and solid phases. The corresponding studies were conducted by visible spectrophotometry and digital image acquisition. The three coordinates of the HSL model system of the collected image (Hue, Saturation and Lightness) were obtained by simple image management (enabled in any computer). The analytical response of the optimised solid-state optical probe against concentration was tested for several mathematical transformations of the colour coordinates. Linear behaviour was observed for logarithm NFX concentration against Hue+Lightness. Under this condition, the sensor exhibited a limit of detection below 50 μM (corresponding to about 16 mg/mL). Visual inspection also enabled semi-quantitative information. The selectivity was ensured against drugs from other chemical groups than fluoroquinolones. Finally, similar procedure was used to prepare an array of sensors for NFX, consisting on different metal species. Cu(II), Mn(II) and aluminon were selected for this purpose. The sensor array was used to detect NFX in aquaculture water, without any prior sample manipulation.

An Extension of Estimation of Domain of Attraction for Fractional Order Linear System Subject to Saturation Control

This paper employs the Lyapunov direct method for the stability analysis of fractional order linear systems subject to input saturation. A new stability condition based on saturation function is adopted for estimating the domain of attraction via ellipsoid approach. To further improve this estimation, the auxiliary feedback is also supported by the concept of stability region. The advantages of the proposed method are twofold: (1) it is straightforward to handle the problem both in analysis and design because of using Lyapunov method, (2) the estimation leads to less conservative results. A numerical example illustrates the feasibility of the proposed method.

Reliability analysis of a timber truss system subjected to decay

Assessing the safety of existing timber structures is of paramount importance for taking reliable decisions on repair actions and their extent. The results obtained through semi-probabilistic methods are unrealistic, as the partial safety factors present in codes are calibrated considering the uncertainty present in new structures. In order to overcome these limitations, and also to include the effects of decay in the safety analysis, probabilistic methods, based on Monte-Carlo simulation are applied here to assess the safety of existing timber structures. In particular, the impact of decay on structural safety is analyzed and discussed, using a simple structural model, similar to that used for current semi-probabilistic analysis.

A eficiência energética nas redes de telecomunicações e tecnologias de informação e comunicação

A presente tese pretende fazer uma abordagem ao crescimento dos consumos de energia elétrica, que se tem verificado, nos últimos anos, no setor das telecomunicações e das tecnologias de informação; devido ao constante crescimento das redes, dos equipamentos a ela ligados e do tráfego que nelas transita. Num contexto de globalização da economia, no qual, as redes de telecomunicações e de energia elétrica são dois dos maiores contribuintes, a presente tese procura encontrar enquadramentos e soluções para um dos maiores desafios que a humanidade enfrenta atualmente, e que em parte, é consequente dessa globalização: encontrar novas fontes e formas de utilização da energia, -particularmente da energia elétrica - para que a humanidade continue a usufruir, de uma forma sustentável, dos benefícios que a mesma proporciona. Na primeira parte, procura-se fazer uma abordagem que utiliza fontes de informação e conhecimento, do mercado global, nomeadamente, entidades reguladoras e normalizadoras, operadores, fornecedores de tecnologias e consumidores, que abrangessem os três maiores mercados mundiais – União Europeia, Estados Unidos da América e Ásia-Pacífico. Considerou-se fundamental fazê-lo, por se tratar de uma dissertação no âmbito de um Mestrado com o selo de garantia EUR-ACE. Ao longo da dissertação analisou-se a temática da eficiência energética nas redes de telecomunicações e das tecnologias de informação e comunicação, um tema cada vez mais pertinente, já que o número de pessoas com ligações à Internet, já supera os 3 mil milhões, e as redes passaram a ser o meio por onde são transmitidos, a cada segundo, terabytes de sinais de voz, dados e vídeo. Procurou-se encontrar as linhas de orientação que estão a ser traçadas, para otimizar os consumos energéticos, de um complexo sistema convergente de redes e serviços, formado por entidades reguladoras e normalizadoras, operadores, fornecedores de tecnologias e consumidores, onde nem sempre as fronteiras estão perfeitamente definidas. Perante a constatação da realidade exposta, analisou-se as políticas energéticas desenvolvidas nos últimos anos, pelos vários players do mercado das telecomunicações, das tecnologias de informação e dos sistemas elétricos de energia bem como algumas métricas e objetivos comumente aceites. viii São analisados os contributos das partes interessadas, para o desenvolvimento de políticas energéticas eficazes, por forma a permitirem uma implementação, que considere o funcionamento dos equipamentos como um todo, e não de uma forma isolada como tradicionalmente o assunto era abordado. As especificidades na forma como funcionam as redes de telecomunicações e respetivos equipamentos, são expostas sobre várias óticas, comprovando-se que a temática da eficiência energética é uma das áreas mais difíceis lidar, de todas as consideradas nas políticas energéticas. Demonstrou-se que muitos dos equipamentos não estão otimizados em termos de gestão de energia, procurou-se evidenciar as consequências dessa realidade, uma vez que os equipamentos referidos, têm a necessidade de estar permanentemente a ser alimentados pela rede de energia elétrica, para garantir as funções para que foram projetados. Da pesquisa efetuada e descrita ao longo da dissertação, constatamos o empenho de toda a comunidade científica, operadores e agências de energia e de telecomunicações, em resolver o problema, já que há a consciencialização de que o ritmo de crescimento da rede e equipamentos terminais, é superior ao registado na melhoria da eficiência energética dos vários componentes e equipamentos terminais. Na segunda parte do relatório da tese, procurou-se testar a aplicabilidade das normas e recomendações dos organismos que tutelam a atividade a nível global - algumas publicadas nos últimos 2 anos - a um caso prático. Um edifício hospitalar de média dimensão. Foi elaborada uma aplicação informática, que suportada numa metodologia padronizada, seja capaz de fazer a avaliação da eficiência energética dos equipamentos serviços de telecomunicações de informação e comunicação em funcionamento do hospital. Por dificuldades de disponibilidade dos responsáveis do edifício, os resultados ficaram aquém do esperado. Conseguiu-se desenhar a aplicação, inventariar-se apenas parte dos equipamentos. Demonstrou-se que, a forma como alguns equipamentos estão a ser utilizados, não cumprem regras de utilização racional e eficiente. Procurou-se sensibilizar alguns dos responsáveis, para a necessidade de alterar comportamentos e prosseguir o processo de inventariação, por forma, a que o trabalho iniciado atinja os objetivos propostos.

Unveiling the mating system and genetic variability in the yeast Kwoniella mangroviensis using molecular approaches

Dissertação para obtenção do Grau de Mestre em Genética Molecular e Biomedicina

ISEGI-NOVA AR Project - Augmented Reality Aplied to the Universidade Nova de Lisboa

Project work presented as a partial requirement to obtain a Master Degree in Information Management

Sustainable urban planning: parameters to the operational process

In modern society, energy consumption and respect for the environment have become essential aspects of urban planning. The rising demand for alternative sources of energy, coupled with the decline in the construction sector and material usage, gives the idea that the thinking on modern cities, where attention is given to reduced energy consumption, savings, waste recycling and respect for the surrounding environment, is being put into practice. If we examine development of the city over recent centuries, by means of the theories of the most famous and influential urban planners, it is possible to identify the major problems caused by this type of planning. For this reason, in recent urban planning the use of systems of indicators that evaluate and certify land environmentally and energetically guides the master plan toward a more efficient city model. In addition the indicators are targeted on key factors determined by the commissioner or the opportunities the territory itself provides. Due the complexity of the environmental mechanics, the process of design and urban planning has become a challenging issue. The introduction of the indicators system has made it possible to register the life of the process, with a spiral route that allows the design itself to be refined. The aim of this study, built around the creation of a system of urban sustainability indicators that will evaluate highly eco-friendly cities, is to develop a certification system for cities or portions of them. The system will be upgradeable and objective, will employ real data and will be concerned with energy production and consumption.

The value creation radar applied to the space engineering sector

This case study illustrates the application of the Value Creation Radar (VCR) to SenSyF, an Earth Observation (EO) system which was developed by Deimos Engenharia S.A. (DME), the Portuguese affiliate of Elecnor Deimos. It describes how a team of consultants adopted the VCR in order to find new market applications for SenSyF, selected the one with the highest potential, and defined a path to guarantee a sustainable market launch. This case study highlights the main challenges of bringing a technology-driven company closer to the market in the pursuit of long-term sustainability, while not compromising its technological capabilities

A proactive intelligent decision support system for predicting the popularity of online news

"Lecture notes in computer science series, ISSN 0302-9743, vol. 9273"

OnBoard reconfigurable battery charger for electric vehicles with traction-to-auxiliary mode

This paper proposes a single-phase reconfigurable battery charger for Electric Vehicle (EV) that operates in three different modes: Grid-to-Vehicle (G2V) mode, in which the traction batteries are charged from the power grid; Vehicle-to-Grid (V2G) mode, in which the traction batteries deliver part of the stored energy back to the power grid; and in Traction-to-Auxiliary (T2A) mode, in which the auxiliary battery is charged from the traction batteries. When connected to the power grid, the battery charger works with sinusoidal current in the AC side, for both G2V and V2G modes, and also regulates the reactive power. When the EV is disconnected from the power grid, the control algorithms are modified and the full-bridge AC-DC bidirectional converter works as a full-bridge isolated DC-DC converter that is used to charge the auxiliary battery of the EV, avoiding the use of an additional charger to accomplish this task. To assess the behavior of the proposed reconfigurable battery charger under different operation scenarios, a 3.6 kW laboratory prototype has been developed and experimental results are presented.

From the periphery to the brain: Lipocalin-2, a friend or foe?

Lipocalin-2 (LCN2) is an acute-phase protein that, by binding to iron-loaded siderophores, acts as a potent bacteriostatic agent in the iron-depletion strategy of the immune system to control pathogens. The recent identification of a mammalian siderophore also suggests a physiological role for LCN2 in iron homeostasis, specifically in iron delivery to cells via a transferrin-independent mechanism. LCN2 participates, as well, in a variety of cellular processes, including cell proliferation, cell differentiation and apoptosis, and has been mostly found up-regulated in various tissues and under inflammatory states, being its expression regulated by several inducers. In the central nervous system less is known about the processes involving LCN2, namely by which cells it is produced/secreted, and its impact on cell proliferation and death, or in neuronal plasticity and behaviour. Importantly, LCN2 recently emerged as a potential clinical biomarker in multiple sclerosis and in ageing-related cognitive decline. Still, there are conflicting views on the role of LCN2 in pathophysiological processes, with some studies pointing to its neurodeleterious effects, while others indicate neuroprotection. Herein, these various perspectives are reviewed and a comprehensive and cohesive view of the general function of LCN2, particularly in the brain, is provided.

Evaluation of the performance of steel fibre reinforced self-compacting concrete in elevated slab systems; from the material to the structure

Degree of Doctor of Philosophy of Structural/Civil Engineering

Influence of the elevation of the left ventricular diastolic pressure on the values of the first temporal derivative of the ventricular pressure (dP/dt)

PURPOSE: To assess the effects of the elevation of the left ventricular end-diastolic pressure (LVEDP) on the value of the 1st temporal derivative of the ventricular pressure (dP/dt). METHODS: Nineteen anesthetized dogs were studied. The dogs were mechanically ventilated and underwent thoracotomy with parasympathetic nervous system block. The LVEDP was controlled with the use of a perfusion circuit connected to the left atrium and adjusted to the height of a reservoir. The elevation of the LVEDP was achieved by a sudden increase in the height of a reservoir filled with blood. Continuous recordings of the electrocardiogram, the aortic and ventricular pressures and the dP/dt were performed. RESULTS: Elevation of the LVEDP did not result in any variation of the heart rate (167±16.0bpm, before the procedure; 167±15.5bpm, after the procedure). All the other variables assessed, including systolic blood pressure (128±18.3mmHg and 150±21.5mmHg), diastolic blood pressure (98±16.9mmHg and 115±19.8mmHg), LVEDP (5.5±2.49 and 9.3±3.60mmHg), and dP/dt (4,855 ± 1,082 mmHg/s and 5,149±1,242mmHg/s) showed significant increases following the expansion of the ventricular cavity. Although the elevation of the dP/dt was statistically significant, 6 dogs curiously showed a decrease in the values of dP/dt. CONCLUSION: Sudden elevation of the LVEDP resulted in increased values of dP/dt; however, in some dogs, this response was not uniform.

An evolutionary approach to the use of Petri net based models: from parallel controllers to HW/SW co-design

"A workshop within the 19th International Conference on Applications and Theory of Petri Nets - ICATPN’1998"