The social construction of cooperation: exchange, identification and collective intentions within the organization

My aim is to develop a theory of cooperation within the organization and empirically test it. Drawing upon social exchange theory, social identity theory, the idea of collective intentions, and social constructivism, the main assumption of my work implies that both cooperation and the organization itself are continually shaped and restructured by actions, judgments, and symbolic interpretations of the parties involved. Therefore, I propose that the decision to cooperate, expressed say as an intention to cooperate, reflects and depends on a three step social process shaped by the interpretations of the actors involved. The first step entails an instrumental evaluation of cooperation in terms of social exchange. In the second step, this “social calculus” is translated into cognitive, emotional and evaluative reactions directed toward the organization. Finally, once the identification process is completed and membership awareness is established, I propose that individuals will start to think largely in terms of “We” instead of “I”. Self-goals are redefined at the collective level, and the outcomes for self, others, and the organization become practically interchangeable. I decided to apply my theory to an important cooperative problem in management research: knowledge exchange within organizations. Hence, I conducted a quantitative survey among the members of the virtual community, “www.borse.it” (n=108). Within this community, members freely decide to exchange their knowledge about the stock market among themselves. Because of the confirmatory requirements and the structural complexity of the theory proposed (i.e., the proposal that instrumental evaluations will induce social identity and this in turn will causes collective intentions), I use Structural Equation Modeling to test all hypotheses in this dissertation. The empirical survey-based study found support for the theory of cooperation proposed in this dissertation. The findings suggest that an appropriate conceptualization of the decision to exchange knowledge is one where collective intentions depend proximally on social identity (i.e., cognitive identification, affective commitment, and evaluative engagement) with the organization, and this identity depends on instrumental evaluations of cooperators (i.e., perceived value of the knowledge received, assessment of past reciprocity, expected reciprocity, and expected social outcomes of the exchange). Furthermore, I find that social identity fully mediates the effects of instrumental motives on collective intentions.

Caratterizzazione e generazione di segnali PWM per amplificatori in classe D ad alta efficienza

The convergence of information technology and consumer electronics towards battery powered portable devices has increased the interest in high efficiency, low dissipation amplifiers. Class D amplifiers are the state of the art in low power consumption and high performance amplification. In this thesis we explore the possibility of exploiting nonlinearities introduced by the PWM modulation, by designing an optimized modulation law which scales its carrier frequency adaptively with the input signal's average power while preserving the SNR, thus reducing power consumption. This is achieved by means of a novel analytical model of the PWM output spectrum, which shows how interfering harmonics and their bandwidth affect the spectrum. This allows for frequency scaling with negligible aliasing between the baseband spectrum and its harmonics. We performed low noise power spectrum measurements on PWM modulations generated by comparing variable bandwidth, random test signals with a variable frequency triangular wave carrier. The experimental results show that power-optimized frequency scaling is both feasible and effective. The new analytical model also suggests a new PWM architecture that can be applied to digitally encoded input signals which are predistorted and compared with a cosine carrier, which is accurately synthesized by a digital oscillator. This approach has been simulated in a realistic noisy model and tested in our measurement setup. A zero crossing search on the obtained PWM modulation law proves that this approach yields an equivalent signal quality with respect to traditional PWM schemes, while entailing the use of signals whose bandwidth is remarkably smaller due to the use of a cosine instead of a triangular carrier.

Catalytic liquid- and gas-phase oxidations for the synthesis of intermediates and specialty chemicals: some examples of industrial relevance

Nowadays, it is clear that the target of creating a sustainable future for the next generations requires to re-think the industrial application of chemistry. It is also evident that more sustainable chemical processes may be economically convenient, in comparison with the conventional ones, because fewer by-products means lower costs for raw materials, for separation and for disposal treatments; but also it implies an increase of productivity and, as a consequence, smaller reactors can be used. In addition, an indirect gain could derive from the better public image of the company, marketing sustainable products or processes. In this context, oxidation reactions play a major role, being the tool for the production of huge quantities of chemical intermediates and specialties. Potentially, the impact of these productions on the environment could have been much worse than it is, if a continuous efforts hadn’t been spent to improve the technologies employed. Substantial technological innovations have driven the development of new catalytic systems, the improvement of reactions and process technologies, contributing to move the chemical industry in the direction of a more sustainable and ecological approach. The roadmap for the application of these concepts includes new synthetic strategies, alternative reactants, catalysts heterogenisation and innovative reactor configurations and process design. Actually, in order to implement all these ideas into real projects, the development of more efficient reactions is one primary target. Yield, selectivity and space-time yield are the right metrics for evaluating the reaction efficiency. In the case of catalytic selective oxidation, the control of selectivity has always been the principal issue, because the formation of total oxidation products (carbon oxides) is thermodynamically more favoured than the formation of the desired, partially oxidized compound. As a matter of fact, only in few oxidation reactions a total, or close to total, conversion is achieved, and usually the selectivity is limited by the formation of by-products or co-products, that often implies unfavourable process economics; moreover, sometimes the cost of the oxidant further penalizes the process. During my PhD work, I have investigated four reactions that are emblematic of the new approaches used in the chemical industry. In the Part A of my thesis, a new process aimed at a more sustainable production of menadione (vitamin K3) is described. The “greener” approach includes the use of hydrogen peroxide in place of chromate (from a stoichiometric oxidation to a catalytic oxidation), also avoiding the production of dangerous waste. Moreover, I have studied the possibility of using an heterogeneous catalytic system, able to efficiently activate hydrogen peroxide. Indeed, the overall process would be carried out in two different steps: the first is the methylation of 1-naphthol with methanol to yield 2-methyl-1-naphthol, the second one is the oxidation of the latter compound to menadione. The catalyst for this latter step, the reaction object of my investigation, consists of Nb2O5-SiO2 prepared with the sol-gel technique. The catalytic tests were first carried out under conditions that simulate the in-situ generation of hydrogen peroxide, that means using a low concentration of the oxidant. Then, experiments were carried out using higher hydrogen peroxide concentration. The study of the reaction mechanism was fundamental to get indications about the best operative conditions, and improve the selectivity to menadione. In the Part B, I explored the direct oxidation of benzene to phenol with hydrogen peroxide. The industrial process for phenol is the oxidation of cumene with oxygen, that also co-produces acetone. This can be considered a case of how economics could drive the sustainability issue; in fact, the new process allowing to obtain directly phenol, besides avoiding the co-production of acetone (a burden for phenol, because the market requirements for the two products are quite different), might be economically convenient with respect to the conventional process, if a high selectivity to phenol were obtained. Titanium silicalite-1 (TS-1) is the catalyst chosen for this reaction. Comparing the reactivity results obtained with some TS-1 samples having different chemical-physical properties, and analyzing in detail the effect of the more important reaction parameters, we could formulate some hypothesis concerning the reaction network and mechanism. Part C of my thesis deals with the hydroxylation of phenol to hydroquinone and catechol. This reaction is already industrially applied but, for economical reason, an improvement of the selectivity to the para di-hydroxilated compound and a decrease of the selectivity to the ortho isomer would be desirable. Also in this case, the catalyst used was the TS-1. The aim of my research was to find out a method to control the selectivity ratio between the two isomers, and finally to make the industrial process more flexible, in order to adapt the process performance in function of fluctuations of the market requirements. The reaction was carried out in both a batch stirred reactor and in a re-circulating fixed-bed reactor. In the first system, the effect of various reaction parameters on catalytic behaviour was investigated: type of solvent or co-solvent, and particle size. With the second reactor type, I investigated the possibility to use a continuous system, and the catalyst shaped in extrudates (instead of powder), in order to avoid the catalyst filtration step. Finally, part D deals with the study of a new process for the valorisation of glycerol, by means of transformation into valuable chemicals. This molecule is nowadays produced in big amount, being a co-product in biodiesel synthesis; therefore, it is considered a raw material from renewable resources (a bio-platform molecule). Initially, we tested the oxidation of glycerol in the liquid-phase, with hydrogen peroxide and TS-1. However, results achieved were not satisfactory. Then we investigated the gas-phase transformation of glycerol into acrylic acid, with the intermediate formation of acrolein; the latter can be obtained by dehydration of glycerol, and then can be oxidized into acrylic acid. Actually, the oxidation step from acrolein to acrylic acid is already optimized at an industrial level; therefore, we decided to investigate in depth the first step of the process. I studied the reactivity of heterogeneous acid catalysts based on sulphated zirconia. Tests were carried out both in aerobic and anaerobic conditions, in order to investigate the effect of oxygen on the catalyst deactivation rate (one main problem usually met in glycerol dehydration). Finally, I studied the reactivity of bifunctional systems, made of Keggin-type polyoxometalates, either alone or supported over sulphated zirconia, in this way combining the acid functionality (necessary for the dehydrative step) with the redox one (necessary for the oxidative step). In conclusion, during my PhD work I investigated reactions that apply the “green chemistry” rules and strategies; in particular, I studied new greener approaches for the synthesis of chemicals (Part A and Part B), the optimisation of reaction parameters to make the oxidation process more flexible (Part C), and the use of a bioplatform molecule for the synthesis of a chemical intermediate (Part D).

Ein inverses Problem für die degeneriert parabolische Richardsgleichung

In der vorliegenden Arbeit werden zwei physikalischeFließexperimente an Vliesstoffen untersucht, die dazu dienensollen, unbekannte hydraulische Parameter des Materials, wiez. B. die Diffusivitäts- oder Leitfähigkeitsfunktion, ausMeßdaten zu identifizieren. Die physikalische undmathematische Modellierung dieser Experimente führt auf einCauchy-Dirichlet-Problem mit freiem Rand für die degeneriertparabolische Richardsgleichung in derSättigungsformulierung, das sogenannte direkte Problem. Ausder Kenntnis des freien Randes dieses Problems soll dernichtlineare Diffusivitätskoeffizient derDifferentialgleichung rekonstruiert werden. Für diesesinverse Problem stellen wir einOutput-Least-Squares-Funktional auf und verwenden zu dessenMinimierung iterative Regularisierungsverfahren wie dasLevenberg-Marquardt-Verfahren und die IRGN-Methode basierendauf einer Parametrisierung des Koeffizientenraumes durchquadratische B-Splines. Für das direkte Problem beweisen wirunter anderem Existenz und Eindeutigkeit der Lösung desCauchy-Dirichlet-Problems sowie die Existenz des freienRandes. Anschließend führen wir formal die Ableitung desfreien Randes nach dem Koeffizienten, die wir für dasnumerische Rekonstruktionsverfahren benötigen, auf einlinear degeneriert parabolisches Randwertproblem zurück.Wir erläutern die numerische Umsetzung und Implementierungunseres Rekonstruktionsverfahrens und stellen abschließendRekonstruktionsergebnisse bezüglich synthetischer Daten vor.

Does improvisation lead to outcome deviation? A conceptual framework of improvisation, its antecedents and outcome deviation

Management and organization literature has extensively noticed the crucial role that improvisation assumes in organizations, both as a learning process (Miner, Bassoff & Moorman, 2001), a creative process (Fisher & Amabile, 2008), a capability (Vera & Crossan, 2005), and a personal disposition (Hmielesky & Corbett, 2006; 2008). My dissertation aims to contribute to the existing literature on improvisation, addressing two general research questions: 1) How does improvisation unfold at an individual level? 2) What are the potential antecedents and consequences of individual proclivity to improvise? This dissertation is based on a mixed methodology that allowed me to deal with these two general research questions and enabled a constant interaction between the theoretical framework and the empirical results. The selected empirical field is haute cuisine and the respondents are the executive chefs of the restaurants awarded by Michelin Guide in 2010 in Italy. The qualitative section of the dissertation is based on the analysis of 26 inductive case studies and offers a multifaceted contribution. First, I describe how improvisation works both as a learning and creative process. Second, I introduce a new categorization of individual improvisational scenarios (demanded creative improvisation, problem solving improvisation, and pure creative improvisation). Third, I describe the differences between improvisation and other creative processes detected in the field (experimentation, brainstorming, trial and error through analytical procedure, trial and error, and imagination). The quantitative inquiry is founded on a Structural Equation Model, which allowed me to test simultaneously the relationships between proclivity to improvise and its antecedents and consequences. In particular, using a newly developed scale to measure individual proclivity to improvise, I test the positive influence of industry experience, self-efficacy, and age on proclivity to improvise and the negative impact of proclivity to improvise on outcome deviation. Theoretical contributions and practical implications of the results are discussed.

Characterization of geothermal reservoirs’ parameters by inverse problem resolution and geostatistical simulations

BTES (borehole thermal energy storage)systems exchange thermal energy by conduction with the surrounding ground through borehole materials. The spatial variability of the geological properties and the space-time variability of hydrogeological conditions affect the real power rate of heat exchangers and, consequently, the amount of energy extracted from / injected into the ground. For this reason, it is not an easy task to identify the underground thermal properties to use when designing. At the current state of technology, Thermal Response Test (TRT) is the in situ test for the characterization of ground thermal properties with the higher degree of accuracy, but it doesn’t fully solve the problem of characterizing the thermal properties of a shallow geothermal reservoir, simply because it characterizes only the neighborhood of the heat exchanger at hand and only for the test duration. Different analytical and numerical models exist for the characterization of shallow geothermal reservoir, but they are still inadequate and not exhaustive: more sophisticated models must be taken into account and a geostatistical approach is needed to tackle natural variability and estimates uncertainty. The approach adopted for reservoir characterization is the “inverse problem”, typical of oil&gas field analysis. Similarly, we create different realizations of thermal properties by direct sequential simulation and we find the best one fitting real production data (fluid temperature along time). The software used to develop heat production simulation is FEFLOW 5.4 (Finite Element subsurface FLOW system). A geostatistical reservoir model has been set up based on literature thermal properties data and spatial variability hypotheses, and a real TRT has been tested. Then we analyzed and used as well two other codes (SA-Geotherm and FV-Geotherm) which are two implementation of the same numerical model of FEFLOW (Al-Khoury model).

Analisi della stabilità dei risultati dei test di risposta termica: prove in campo, confronto e analisi critica per diversi metodi di esecuzione e modellizzazione

Il Test di Risposta Termica (Thermal Response Test-TRT) (Mogenson,1983) è il test esistente con il più alto grado di accuratezza per la caratterizzazione del reservoir geotermico superficiale. Il test consiste in una simulazione in situ del funzionamento di un sistema a circuito chiuso di sfruttamento dell’energia geotermica, per un periodo limitato di tempo, attraverso l’iniezione o estrazione di calore a potenza costante all’interno del geo-scambiatore (Borehole Heat Exchanger-BHE). Dall’analisi della variazione delle temperature del fluido circolante, è possibile avere una stima delle proprietà termiche medie del volume del reservoir geotermico interessato dal test. Le grandezze principali per la caratterizzazione di un serbatoio geotermico sono la conduttività termica (λ), la capacità termica volumetrica (c), la temperatura indisturbata del suolo (Tg) e la resistenza termica del pozzo (Rb); la loro determinazione è necessaria per il corretto progettazione degli geo-scambiatori. I risultati del TRT sono tuttavia sensibili alle condizioni al contorno spazio-temporali quali ad es.: variazione della temperatura del terreno, movimento d’acqua di falda, condizioni metereologiche, eventi stagionali, ecc. Questo lavoro vuole: i) introdurre uno studio sui problemi di caratterizzazione del reservoir geotermico superficiale, in particolare analizzando l’effetto che il movimento d’acqua di falda ha sui parametri termici; ii) analizzare la sensitività dei risultati del test alle variabilità dei parametri caratteristici del funzionamento delle attrezzature. Parte del lavoro della mia tesi è stata svolta in azienda per un periodo di 4 mesi presso la “Groenholland Geo Energy systems” che ha sede ad Amsterdam in Olanda. Tre diversi esperimenti sono stati realizzati sullo stesso sito (stratigrafia nota del terreno: argilla, sabbia fine e sabbia grossa) usando una sonda profonda 30 metri e diversi pozzi per l’estrazione d’acqua e per monitorare gli effetti in prossimità del geo scambiatore. I risultati degli esperimenti sono stati molto diversi tra di loro, non solo in termini di dati registrati (temperature del fluido termovettore), ma in termini dei valori dei parametri ottenuti elaborando i dati. In particolare non è sufficiente adottare il modello classico della sorgente lineare infinita (Infinite Line Source Solution- ILS) (Ingersoll and Plass, 1948), il quale descrive il trasferimento di calore per conduzione in un mezzo omogeneo indefinito a temperatura costante. Infatti, lo scambio di calore avviene anche tramite convezione causata dal movimento d’acqua di falda, non identificabile mediante gli approcci classici tipo CUSUM test (Cumulative Sum test) (Brown e altri,1975) Lo studio della tesi vuole dare un quadro di riferimento per correlare la variabilità dei risultati con la variabilità delle condizioni al contorno. L’analisi integra le metodologie classiche (ILS) con un approccio geostatistico utile a comprendere i fenomeni e fluttuazioni che caratterizzano il test. Lo studio delle principali variabili e parametri del test, quali temperatura in ingresso e uscita del fluido termovettore, portata del fluido e potenza iniettata o estratta, è stato sviluppato mediante: il variogramma temporale, ovvero la semivarianza dell’accrescimento, che esprime il tipo di autocorrelazione temporale della variabile in esame; la covarianza incrociata temporale, ovvero la covarianza fra due variabili del sistema, che ne definisce quantitativamente il grado di correlazione in funzionamento del loro sfasamento temporale. L’approccio geostatistico proposto considera la temperatura del fluido Tf come una funzione aleatoria (FA) non stazionaria nel tempo (Chiles, 1999), il cui trend è formalmente definito, ma deve essere identificato numericamente. Si considera quindi un classico modello a residuo; in cui la FA è modellizzata come la somma di un termine deterministico, la media (il valore atteso) m(t),coincidente col modello descritto dalla teoria della sorgente lineare infinità, e di un termine aleatorio, la fluttuazione, Y(t). Le variabili portata e potenza sono invece considerate delle funzioni aleatorie stazionarie nel tempo, ovvero a media costante. Da questo studio di Tesi si sono raggiunte delle conclusioni molto importanti per lo studio del TRT: Confronto tra gli esperimenti in estrazione di calore, con e senza movimento d’acqua di falda: si studia l’effetto indotto dalla falda sul TRT. E’ possibile caratterizzare quantitativamente l’incremento della conducibilità termica equivalente legata a fenomeni convettivi dovuti al movimento d’acqua di falda. Inoltre, i variogrammi sperimentali evidenziano periodicità simili nei due casi e legate al funzionamento della pompa di calore e della componentistica associata ed alla circolazione del fluido termovettore all’interno della sonda. Tuttavia, la componente advettiva ha un effetto di smorzamento sulle piccole periodicità dei variogrammi, ma di aumento dell’ampiezza delle periodicità maggiori a causa del funzionamento della pompa di calore che deve fornire maggiore energia al sistema per bilanciare le dispersioni dovute al movimento d’acqua di falda. Confronto fra estrazione ed iniezione di calore, con movimento d’acqua di falda: si studia la significatività dei risultati nei due casi. L’analisi delle variografie evidenzia significative differenze nella struttura dei variogrammi sperimentali. In particolare, nel test con iniezione di calore i variogrammi sperimentali delle temperature hanno valori sistematicamente inferiori, circostanza che assicura una migliore precisione nella stima dei parametri termici. Quindi eseguire il TRT in iniezione di calore risulta più preciso. Dall’analisi dei variogrammi sperimentali delle singole variabili quali temperatura del fluido in ingresso e uscita all’interno del geoscambiatore è stato confermato il fenomeno di smorzamento delle oscillazioni da parte del terreno. Dall’analisi delle singole variabili del test (temperature, potenza, portata) è stata confermata l’indipendenza temporale fra portate e temperature. Ciò è evidenziato dalle diverse strutture dei variogrammi diretti e dalle covarianze incrociate prossime a zero. Mediante correlogrami è stato dimostrato la possibilità di calcolare il tempo impiegato dal fluido termovettore per circolare all’interno della sonda. L’analisi geostatistica ha permesso quindi di studiare in dettaglio la sensitività dei risultati del TRT alle diverse condizioni al contorno, quelle legate al reservoir e quelle legate al funzionamento delle attrezzature

General effective medium model for the complex permittivity extraction with an open-ended coaxial probe in presence of a multilayer material under test

The work presented in this thesis is focused on the open-ended coaxial-probe frequency-domain reflectometry technique for complex permittivity measurement at microwave frequencies of dispersive dielectric multilayer materials. An effective dielectric model is introduced and validated to extend the applicability of this technique to multilayer materials in on-line system context. In addition, the thesis presents: 1) a numerical study regarding the imperfectness of the contact at the probe-material interface, 2) a review of the available models and techniques, 3) a new classification of the extraction schemes with guidelines on how they can be used to improve the overall performance of the probe according to the problem requirements.

Algal wastewater treatment and biomass producing potential: nutrient removal efficiency and cell physiological responses

Microalgae are sun - light cell factories that convert carbon dioxide to biofuels, foods, feeds, and other bioproducts. The concept of microalgae cultivation as an integrated system in wastewater treatment has optimized the potential of the microalgae - based biofuel production. These microorganisms contains lipids, polysaccharides, proteins, pigments and other cell compounds, and their biomass can provide different kinds of biofuels such as biodiesel, biomethane and ethanol. The algal biomass application strongly depends on the cell composition and the production of biofuels appears to be economically convenient only in conjunction with wastewater treatment. The aim of this research thesis was to investigate a biological wastewater system on a laboratory scale growing a newly isolated freshwater microalgae, Desmodesmus communis, in effluents generated by a local wastewater reclamation facility in Cesena (Emilia Romagna, Italy) in batch and semi - continuous cultures. This work showed the potential utilization of this microorganism in an algae - based wastewater treatment; Desmodesmus communis had a great capacity to grow in the wastewater, competing with other microorganisms naturally present and adapting to various environmental conditions such as different irradiance levels and nutrient concentrations. The nutrient removal efficiency was characterized at different hydraulic retention times as well as the algal growth rate and biomass composition in terms of proteins, polysaccharides, total lipids and total fatty acids (TFAs) which are considered the substrate for biodiesel production. The biochemical analyses were coupled with the biomass elemental analysis which specified the amount of carbon and nitrogen in the algal biomass. Furthermore photosynthetic investigations were carried out to better correlate the environmental conditions with the physiology responses of the cells and consequently get more information to optimize the growth rate and the increase of TFAs and C/N ratio, cellular compounds and biomass parameter which are fundamental in the biomass energy recovery.

Quantum gravity effects in rotating black hole spacetimes

The aim of this work is to explore, within the framework of the presumably asymptotically safe Quantum Einstein Gravity, quantum corrections to black hole spacetimes, in particular in the case of rotating black holes. We have analysed this problem by exploiting the scale dependent Newton s constant implied by the renormalization group equation for the effective average action, and introducing an appropriate "cutoff identification" which relates the renormalization scale to the geometry of the spacetime manifold. We used these two ingredients in order to "renormalization group improve" the classical Kerr metric that describes the spacetime generated by a rotating black hole. We have focused our investigation on four basic subjects of black hole physics. The main results related to these topics can be summarized as follows. Concerning the critical surfaces, i.e. horizons and static limit surfaces, the improvement leads to a smooth deformation of the classical critical surfaces. Their number remains unchanged. In relation to the Penrose process for energy extraction from black holes, we have found that there exists a non-trivial correlation between regions of negative energy states in the phase space of rotating test particles and configurations of critical surfaces of the black hole. As for the vacuum energy-momentum tensor and the energy conditions we have shown that no model with "normal" matter, in the sense of matter fulfilling the usual energy conditions, can simulate the quantum fluctuations described by the improved Kerr spacetime that we have derived. Finally, in the context of black hole thermodynamics, we have performed calculations of the mass and angular momentum of the improved Kerr black hole, applying the standard Komar integrals. The results reflect the antiscreening character of the quantum fluctuations of the gravitational field. Furthermore we calculated approximations to the entropy and the temperature of the improved Kerr black hole to leading order in the angular momentum. More generally we have proven that the temperature can no longer be proportional to the surface gravity if an entropy-like state function is to exist.

Spectrum reconstruction from a scattering measurement using the adjoint Boltzmann transport equation for photons

Quality control of medical radiological systems is of fundamental importance, and requires efficient methods for accurately determine the X-ray source spectrum. Straightforward measurements of X-ray spectra in standard operating require the limitation of the high photon flux, and therefore the measure has to be performed in a laboratory. However, the optimal quality control requires frequent in situ measurements which can be only performed using a portable system. To reduce the photon flux by 3 magnitude orders an indirect technique based on the scattering of the X-ray source beam by a solid target is used. The measured spectrum presents a lack of information because of transport and detection effects. The solution is then unfolded by solving the matrix equation that represents formally the scattering problem. However, the algebraic system is ill-conditioned and, therefore, it is not possible to obtain a satisfactory solution. Special strategies are necessary to circumvent the ill-conditioning. Numerous attempts have been done to solve this problem by using purely mathematical methods. In this thesis, a more physical point of view is adopted. The proposed method uses both the forward and the adjoint solutions of the Boltzmann transport equation to generate a better conditioned linear algebraic system. The procedure has been tested first on numerical experiments, giving excellent results. Then, the method has been verified with experimental measurements performed at the Operational Unit of Health Physics of the University of Bologna. The reconstructed spectra have been compared with the ones obtained with straightforward measurements, showing very good agreement.

Kriterien effizienter Informationsverarbeitung als Prädiktoren des Karriereerfolgs

Die vorliegende Arbeit beschäftigt sich mit Kriterien effizienter und flexibler Informationsverarbeitung und deren Auswirkungen auf den Karriereerfolg. Die Kriterien Interferenz, Interferenz unter der negativen Priming-Bedingung und die Spontanflexibilität wurden in drei aufeinander aufbauenden Studien untersucht. Die Interferenzindices wurden mit einer modifizierten Form des Stroop-Tests erhoben, und das Konstrukt der Spontanflexibilität wurde mit der Gauß-Aufgabe, der Wasserumschüttaufgabe, dem Wortgruppentest und der Anagramm-Aufgabe operationalisiert. Bei diesen Aufgaben wurde eine Lösungsstrategie vorgegeben, aber es gab zusätzlich eine effizientere Lösungsstrategie, die während der Bearbeitung der Einzelaufgaben immer offensichtlicher wurde. Da die einzelnen Aufgaben nicht signifikant miteinander korrelierten, wurde im Rahmen einer Nachuntersuchung die Reliabilität über Parallelaufgaben geprüft. Für die Diagnose von Gruppenunterschieden erwiesen sich die Indikatoren der Spontanflexibilität als hinreichend reliabel. Die Wortdarbietungszeiten der Interferenzindices waren hochreliabel. Zwischen den Interferenzindices zeigte sich ein starker positiver Zusammenhang. Zur Validierung der Aufgaben wurden Beurteilungen über die berufliche Leistung der Versuchsteilnehmer herangezogen. Zwischen den einzelnen Beurteilungskriterien zeigten sich hohe Zusammenhänge. Die Gauß-Aufgabe korrelierte mit einem Beurteilungskriterium, dessen Verhaltensbeschreibungen sehr gut mit der Definition der Spontanflexibilität übereinstimmten. Die Wasserumschüttaufgabe korrelierte mit einem Beurteilungskriterium, welches eher eine durch die Situation herausgeforderte Flexibilität widerspiegelt. Die Interferenzindikatoren korrelierten mit Beurteilungskriterien, die zum einen die Fähigkeit zum Aufbauen von professionellen Beziehungen und zum anderen die Effizienz und den Qualitätsstandard eines Mitarbeiters bewerteten. Aufgrund der replizierten Zusammenhänge kann davon ausgegangen werden, dass die Interferenz, die Interferenz unter der negativen Priming-Bedingung, die Spontanflexibilität und die herausgeforderte Flexibilität Einfluss auf den Karriereerfolg eines Mitarbeiters nehmen. Aus diesem Grund bieten sich im Bereich der Arbeits- und Organisationspsychologie vielversprechende Einsatzmöglichkeiten für die in dieser Untersuchung entwickelten Tests an.

Factorization method and inclusions of mixed type in an inverse elliptic boundary value problem

In various imaging problems the task is to use the Cauchy data of the solutions to an elliptic boundary value problem to reconstruct the coefficients of the corresponding partial differential equation. Often the examined object has known background properties but is contaminated by inhomogeneities that cause perturbations of the coefficient functions. The factorization method of Kirsch provides a tool for locating such inclusions. In this paper, the factorization technique is studied in the framework of coercive elliptic partial differential equations of the divergence type: Earlier it has been demonstrated that the factorization algorithm can reconstruct the support of a strictly positive (or negative) definite perturbation of the leading order coefficient, or if that remains unperturbed, the support of a strictly positive (or negative) perturbation of the zeroth order coefficient. In this work we show that these two types of inhomogeneities can, in fact, be located simultaneously. Unlike in the earlier articles on the factorization method, our inclusions may have disconnected complements and we also weaken some other a priori assumptions of the method. Our theoretical findings are complemented by two-dimensional numerical experiments that are presented in the framework of the diffusion approximation of optical tomography.

Detecting interfaces in a parabolic-elliptic problem from surface measurements

Assuming that the heat capacity of a body is negligible outside certain inclusions the heat equation degenerates to a parabolic-elliptic interface problem. In this work we aim to detect these interfaces from thermal measurements on the surface of the body. We deduce an equivalent variational formulation for the parabolic-elliptic problem and give a new proof of the unique solvability based on Lions’s projection lemma. For the case that the heat conductivity is higher inside the inclusions, we develop an adaptation of the factorization method to this time-dependent problem. In particular this shows that the locations of the interfaces are uniquely determined by boundary measurements. The method also yields to a numerical algorithm to recover the inclusions and thus the interfaces. We demonstrate how measurement data can be simulated numerically by a coupling of a finite element method with a boundary element method, and finally we present some numerical results for the inverse problem.

Modelling and Design of Advanced Reliable Circuits and Devices for Energy Efficiency

Reliable electronic systems, namely a set of reliable electronic devices connected to each other and working correctly together for the same functionality, represent an essential ingredient for the large-scale commercial implementation of any technological advancement. Microelectronics technologies and new powerful integrated circuits provide noticeable improvements in performance and cost-effectiveness, and allow introducing electronic systems in increasingly diversified contexts. On the other hand, opening of new fields of application leads to new, unexplored reliability issues. The development of semiconductor device and electrical models (such as the well known SPICE models) able to describe the electrical behavior of devices and circuits, is a useful means to simulate and analyze the functionality of new electronic architectures and new technologies. Moreover, it represents an effective way to point out the reliability issues due to the employment of advanced electronic systems in new application contexts. In this thesis modeling and design of both advanced reliable circuits for general-purpose applications and devices for energy efficiency are considered. More in details, the following activities have been carried out: first, reliability issues in terms of security of standard communication protocols in wireless sensor networks are discussed. A new communication protocol is introduced, allows increasing the network security. Second, a novel scheme for the on-die measurement of either clock jitter or process parameter variations is proposed. The developed scheme can be used for an evaluation of both jitter and process parameter variations at low costs. Then, reliability issues in the field of “energy scavenging systems” have been analyzed. An accurate analysis and modeling of the effects of faults affecting circuit for energy harvesting from mechanical vibrations is performed. Finally, the problem of modeling the electrical and thermal behavior of photovoltaic (PV) cells under hot-spot condition is addressed with the development of an electrical and thermal model.