Electromagnetic and thermal design of a multilevel converter with high power density and reliability

Electric energy demand has been growing constantly as the global population increases. To avoid electric energy shortage, renewable energy sources and energy conservation are emphasized all over the world. The role of power electronics in energy saving and development of renewable energy systems is significant. Power electronics is applied in wind, solar, fuel cell, and micro turbine energy systems for the energy conversion and control. The use of power electronics introduces an energy saving potential in such applications as motors, lighting, home appliances, and consumer electronics. Despite the advantages of power converters, their penetration into the market requires that they have a set of characteristics such as high reliability and power density, cost effectiveness, and low weight, which are dictated by the emerging applications. In association with the increasing requirements, the design of the power converter is becoming more complicated, and thus, a multidisciplinary approach to the modelling of the converter is required. In this doctoral dissertation, methods and models are developed for the design of a multilevel power converter and the analysis of the related electromagnetic, thermal, and reliability issues. The focus is on the design of the main circuit. The electromagnetic model of the laminated busbar system and the IGBT modules is established with the aim of minimizing the stray inductance of the commutation loops that degrade the converter power capability. The circular busbar system is proposed to achieve equal current sharing among parallel-connected devices and implemented in the non-destructive test set-up. In addition to the electromagnetic model, a thermal model of the laminated busbar system is developed based on a lumped parameter thermal model. The temperature and temperature-dependent power losses of the busbars are estimated by the proposed algorithm. The Joule losses produced by non-sinusoidal currents flowing through the busbars in the converter are estimated taking into account the skin and proximity effects, which have a strong influence on the AC resistance of the busbars. The lifetime estimation algorithm was implemented to investigate the influence of the cooling solution on the reliability of the IGBT modules. As efficient cooling solutions have a low thermal inertia, they cause excessive temperature cycling of the IGBTs. Thus, a reliability analysis is required when selecting the cooling solutions for a particular application. The control of the cooling solution based on the use of a heat flux sensor is proposed to reduce the amplitude of the temperature cycles. The developed methods and models are verified experimentally by a laboratory prototype.

Sustainable Development – the Key to Competitiveness CSR as an added value to Alstom’s corporate performance

Corporate social responsibility or CSR is today a widely recognized concept which is receiving in- creasing popularity extremely rapidly, especially in the business world. The pressure on companies to carry out their business practices in ethical manners, which promote the wellbeing of the environment and society, is coming from all directions and all stakeholders. Alstom, a French multinational conglomerate operating in the rail transport and energy industry, is no exception to this norm. This company, which will be used as the case example in this thesis, is being brought to bay in terms of engaging in CSR practices and practicing business with high ethics. It is surely not a negatively conceived phenomenon that CSR is being put on a pedestal – quite the opposite. Instead of corporations practicing CSR only to meet their stakeholder requirements through practicing window dressing, many corporations actually strive to benefit from the practice of corporate social business. In addition to bringing benefit to externals a corporation such as Alstom itself can benefit from being involved in CSR. The purpose of this thesis is to evaluate the current strategic values and the future perspectives of CSR at Alstom and moreover the added value which the practice of CSR could bring Alstom as a business. A set of perspectives from a futures studies viewpoint is looked at, with critical examination of the company’s current corporate practices as well as the CSR related studies and theories written for corporations. Through this, some solutions and practices will be suggested to Alstom in order for it to fully utilize the potential of corporate social business and the value it can bring in the most probable futures that the company is expected to face. By utilizing the Soft Systems Methodology (SSM), a method mainly used in organizations to solve problematic issues in management and policy contexts, a process is developed to see what improvements could be of help in improving Alstom and its way towards involving CSR in its business practices even more than it currently does. Alstom is already deeply involved in the practicing of CSR and its vision has a strong emphasis on this popular concept of today. In order to stay in the game and to use CSR as a competitive advantage to the company, Alstom ought to embed corporate social practices even deeper in its organizational culture by using them as a tool to reduce risk and costs, increasing employee commitment and customer loyalty and to attract socially responsible investors, just to name a few. CSR as a concept is seen to have great potential in the future, an opportunity Alstom will not miss.

Detection of enterotoxins produced by B. cereus through PCR analysis of ground and roasted coffee samples in Rio de Janeiro, Brazil

Coffee is one of the most appreciated drinks in the world. Coffee ground is obtained from the fruit of a small plant that belongs to the genus Coffea. Coffea arabica and Coffea canephora robusta are the two most commercially important species. They are more commonly known as arabica and robusta, respectively. Two-thirds of Coffea arabica plants are grown in South and Central America, and Eastern Africa - the place of origin for this coffee species. Contamination by microorganisms has been a major matter affecting coffee quality in Brazil, mainly due to the harvesting method adopted. Brazilian harvests are based on fruits collected from the ground mixed with those that fall on collection cloths. As the Bacillus cereus bacterium frequently uses the soil as its environmental reservoir, it is easily capable of becoming a contaminant. This study aimed to evaluate the contamination and potential of B. cereus enterotoxin genes encoding the HBL and NHE complexes, which were observed in strains of ground and roasted coffee samples sold in Rio de Janeiro. The PCR (Polymerase Chain Reaction) results revealed high potential of enterotoxin production in the samples. The method described by Speck (1984) was used for the isolation of contaminants. The investigation of the potential production of enterotoxins through isolates of the microorganism was performed using the B. cereus enterotoxin Reverse Passive Latex Agglutination test-kit (BCET-RPLA, Oxoid), according to the manufacturer's instructions. The potential of enterotoxin production was investigated using polymerase chain reaction (PCR) methods for hblA, hblD and hblC genes (encoding hemolysin HBL) and for nheA, nheB and nheC genes (encoding non-hemolytic enterotoxin - NHE). Of all the 17 strains, 100% were positive for at least 1 enterotoxin gene; 52.9% (9/17) were positive for the 3 genes encoding the HBL complex; 35.3% (6/17) were positive for the three NHE encoding genes; and 29.4% (5/17) were positive for all enterotoxic genes.

Iron and zinc availability in maize lines

The aim of this study was to characterize the Zn and Fe availability by phytic acid/Zn and phytic acid/Fe molar ratios, in 22 tropical maize inbred lines with different genetic backgrounds. The Zn and Fe levels were determined by atomic absorption spectrophotometry and the P through colorimetry method. Three screening methods for phytic acid (Phy) analysis were tested and one, based on the 2,2'-bipyridine reaction, was select. There was significant variability in the contents of zinc (17.5 to 42 mg.kg-1), iron (12.2 to 36.7 mg.kg-1), phosphorus (230 to 400 mg.100 g-1), phytic acid (484 to 1056 mg.100 g-1), phytic acid P (140 to 293 mg.100 g-1) and available-P (43.5 to 199.5 mg.100 g-1), and in the available-P/total-P ratio (0.14 to 0.50), Phy/Zn (18.0 to 43.5) and Phy/Fe (16.3 to 45.5) molar ratios. Lines 560977, 560978 and 560982 had greater availability of Zn and lines 560975, 560977, 561010 and 5610111 showed better Fe availability. Lines 560975, 560977 and 560978 also showed better available-P/total-P ratio. Thus, the lines 560975, 560977 and 560978 were considered to have the potential for the development of cultivars of maize with high availability of Fe and/or Zn.

An alternative method for screening lactic acid bacteria for the production of exopolysaccharides with rapid confirmation

The accumulation of exopolysaccharides (EPS) produced by microorganisms occurs in the presence of excess substrate and limiting conditions of elements that are essential to growth, such as nitrogen, phosphorus, sulfur, and magnesium. The presence of EPS produced by bacterial cells contributes to slime colonies formation in solid medium and increased viscosity in liquid medium. This paper proposes an alternative method for screening EPS-producing lactic acid bacteria using solid medium-containing discs of filter paper that are saturated with active cultures. The screening was carried out under different culture conditions varying the type of sugar, pH, and temperature. EPS production was visualized by the presence of mucoid colonies on the discs, which was confirmed by the formation of a precipitate when part of this colony was mixed with absolute alcohol. The established conditions for obtaining a high number of isolates producing EPS were 10% sucrose, pH 7.5 and 28 ºC. This method proved to be effective and economical because several strains could be tested on the same plate, with immediate confirmation.

The role of metal ions in selective and sustainable processes

Sustainability and recycling are core values in today’s industrial operations. New materials, products and processes need to be designed in such a way as to consume fewer of the diminishing resources we have available and to put as little strain on the environment as possible. An integral part of this is cleaning and recycling. New processes are to be designed to improve the efficiency in this aspect. Wastewater, including municipal wastewaters, is treated in several steps including chemical and mechanical cleaning of waters. Well-cleaned water can be recycled and reused. Clean water for everyone is one of the greatest challenges we are facing today. Ferric sulphate, made by oxidation from ferrous sulphate, is used in water purification. The oxidation of ferrous sulphate, FeSO4, to ferric sulphate in acidic aqueous solutions of H2SO4 over finely dispersed active carbon particles was studied in a vigorously stirred batch reactor. Molecular oxygen was used as the oxidation agent and several catalysts were screened: active carbon, active carbon impregnated with Pt, Rh, Pd and Ru. Both active carbon and noble metal-active carbon catalysts enhanced the oxidation rate considerably. The order of the noble metals according to the effect was: Pt >> Rh > Pd, Ru. By the use of catalysts, the production capacities of existing oxidation units can be considerably increased. Good coagulants have a high charge on a long polymer chain effectively capturing dirty particles of the opposite charge. Analysis of the reaction product indicated that it is possible to obtain polymeric iron-based products with good coagulation properties. Systematic kinetic experiments were carried out at the temperature and pressure ranges of 60B100°C and 4B10 bar, respectively. The results revealed that both non-catalytic and catalytic oxidation of Fe2+ to Fe3+ take place simultaneously. The experimental data were fitted to rate equations, which were based on a plausible reaction mechanism: adsorption of dissolved oxygen on active carbon, electron transfer from Fe2+ ions to adsorbed oxygen and formation of surface hydroxyls. A comparison of the Fe2+ concentrations predicted by the kinetic model with the experimentally observed concentrations indicated that the mechanistic rate equations were able to describe the intrinsic oxidation kinetics of Fe2+ over active carbon and active carbon-noble metal catalysts. Engineering aspects were closely considered and effort was directed to utilizing existing equipment in the production of the new coagulant. Ferrous sulphate can be catalytically oxidized to produce a novel long-chained polymeric iron-based flocculent in an easy and affordable way in existing facilities. The results can be used for modelling the reactors and for scale-up. Ferric iron (Fe3+) was successfully applied for the dissolution of sphalerite. Sphalerite contains indium, gallium and germanium, among others, and the application can promote their recovery. The understanding of the reduction process of ferric to ferrous iron can be used to develop further the understanding of the dissolution mechanisms and oxidation of ferrous sulphate. Indium, gallium and germanium face an ever-increasing demand in the electronics industry, among others. The supply is, however, very limited. The fact that most part of the material is obtained through secondary production means that real production quota depends on the primary material production. This also sets the pricing. The primary production material is in most cases zinc and aluminium. Recycling of scrap material and the utilization of industrial waste, containing indium, gallium and geranium, is a necessity without real options. As a part of this study plausible methods for the recovery of indium, gallium and germanium have been studied. The results were encouraging and provided information about the precipitation of these valuables from highly acidic solutions. Indium and gallium were separated from acidic sulphuric acid solutions by precipitation with basic sulphates such as alunite or they were precipitated as basic sulphates of their own as galliunite and indiunite. Germanium may precipitate as a basic sulphate of a mixed composition. The precipitation is rapid and the selectivity is good. When the solutions contain both indium and gallium then the results show that gallium should be separated before indium to achieve a better selectivity. Germanium was separated from highly acidic sulphuric acid solutions containing other metals as well by precipitating with tannic acid. This is a highly selective method. According to the study other commonly found metals in the solution do not affect germanium precipitation. The reduction of ferric iron to ferrous, the precipitation of indium, gallium and germanium, and the dissolution of the raw materials are strongly depending on temperature and pH. The temperature and pH effect were studied and which contributed to the understanding and design of the different process steps. Increased temperature and reduced pH improve the reduction rate. Finally, the gained understanding in the studied areas can be employed to develop better industrial processes not only on a large scale but also increasingly on a smaller scale. The small amounts of indium, gallium and germanium may favour smaller and more locally bound recovery.

Screening of iron-enriched fungus from natural environment and evaluation of organically bound iron bioavailability in rats

Iron is an essential element for nearly all living organisms, and its deficiency is the most common form of malnutrition in the world. The organic forms of trace elements are considered more bioavailable than the inorganic forms. Although Saccharomyces cerevisiae can enrich metal elements and convert inorganic iron to organic species, its tolerability and transforming capacity are limited. The aim of this study was to screen higher biomass and other iron-enriched fungi strains besides Saccharomyces cerevisiae from the natural environment. A PDA medium containing 800 μg/mL iron was used for initial screening. Fifty strains that tolerated high iron concentration were isolated from the natural environment, and only one strain, No.BY1109, grew well at Fe (II) concentration of 10,000μg/ml. According to morphological characterization, 18S rDNA sequence analysis, and biophysical and biochemical characterization, the strain No.BY1109 was identified as Rhodotorula. The iron content of No.BY1109 (10 mg Fe/g dry cell) was determined using atomic absorption spectrometry. The results of distribution of iron in the cells showed that iron ion was mainly chelated in the cell walls and vacuoles. The bioavailability in rats confirmed that strain No.BY1109 had higher absorption efficiency than that of ferrous sulfate after single dose oral administration. The present study introduces new iron supplements, and it is a basis for finding new iron supplements from natural environment.

Enhanced extraction of phenolic compounds from coffee industry’s residues through solid state fermentation by Penicillium purpurogenum

Abstract The use of agroindustrial residues is an economical solution to industrial biotechnology. Coffee husk and pulp are abounding residues from coffee industry which can be used as substrates in solid state fermentation process, thus allowing a liberation and increase in the phenolic compound content with high added value. By employing statistical design, initial moisture content, pH value in the medium, and the incubation temperature were evaluated, in order to increase the polyphenol content in a process of solid state fermentation by Penicillium purpurogenum. The main phenolic compounds identified through HPLC in fermented coffee residue were chlorogenic acid, caffeic acid, and rutin. Data obtained through HPLC with the radical absorbance capacity assay suggest the fermented coffee husk and pulp extracts potential as a source of phenolic acids and flavonoids. Results showed good perspectives when using P. purpurogenum strain to enhance the liberation of phenolic compounds in coffee residues.

Impact of Word-of-Mouth on consumer decision-making: An information processing perspective in the context of a high-involvement service

This doctoral study conducts an empirical analysis of the impact of Word-of-Mouth (WOM) on marketing-relevant outcomes such as attitudes and consumer choice, during a high-involvement and complex service decision. Due to its importance to decisionmaking, WOM has attracted interest from academia and practitioners for decades. Consumers are known to discuss products and services with one another. These discussions help consumers to form an evaluative opinion, as WOM reduces perceived risk, simplifies complexity, and increases the confidence of consumers in decisionmaking. These discussions are also highly impactful as WOM is a trustworthy source of information, since it is independent from the company or brand. In responding to the calls for more research on what happens after WOM information is received, and how it affects marketing-relevant outcomes, this dissertation extends prior WOM literature by investigating how consumers process information in a highinvolvement service domain, in particular higher-education. Further, the dissertation studies how the form of WOM influences consumer choice. The research contributes to WOM and services marketing literature by developing and empirically testing a framework for information processing and studying the long-term effects of WOM. The results of the dissertation are presented in five research publications. The publications are based on longitudinal data. The research leads to the development of a proposed theoretical framework for the processing of WOM, based on theories from social psychology. The framework is specifically focused on service decisions, as it takes into account evaluation difficulty through the complex nature of choice criteria associated with service purchase decisions. Further, other gaps in current WOM literature are taken into account by, for example, examining how the source of WOM and service values affects the processing mechanism. The research also provides implications for managers aiming to trigger favorable WOM through marketing efforts, such as advertising and testimonials. The results provide suggestions on how to design these marketing efforts by taking into account the mechanism through which information is processed, or the form of social influence.

Targeting oncogenic signaling proteins : new insights using a FRET-based chemical biology approach

Cancer affects more than 20 million people each year and this rate is increasing globally. The Ras/MAPK-pathway is one of the best-studied cancer signaling pathways. Ras proteins are mutated in almost 20% of all human cancers and despite numerous efforts, no effective therapy that specifically targets Ras is available to date. It is now well established that Ras proteins laterally segregate on the plasma membrane into transient nanoscale signaling complexes called nanoclusters. These Ras nanoclusters are essential for the high-fidelity signal transmission. Disruption of nanoclustering leads to reduction in Ras activity and signaling, therefore targeting nanoclusters opens up important new therapeutic possibilities in cancer. This work describes three different studies exploring the idea of membrane protein nanoclusters as novel anti-cancer drug targets. It is focused on the design and implementation of a simple, cell-based Förster Resonance Energy Transfer (FRET)-biosensor screening platform to identify compounds that affect Ras membrane organization and nanoclustering. Chemical libraries from different sources were tested and a number of potential hit molecules were validated on full-length oncogenic proteins using a combination of imaging, biochemical and transformation assays. In the first study, a small chemical library was screened using H-ras derived FRET-biosensors. Surprisingly from this screen, commonly used protein synthesis inhibitors (PSIs) were found to specifically increase H-ras nanoclustering and downstream signalling in a H-ras dependent manner. Using a representative PSI, increase in H-ras activity was shown to induce cancer stem cell (CSC)-enriched mammosphere formation and tumor growth of breast cancer cells. Moreover, PSIs do not increase K-ras nanoclustering, making this screening approach suitable for identifying Ras isoform-specific inhibitors. In the second study, a nanoncluster-directed screen using both H- and K-ras derived FRET biosensors identified CSC inhibitor salinomycin to specifically inhibit K-ras nanocluster organization and downstream signaling. A K-ras nanoclusteringassociated gene signature was established that predicts the drug sensitivity of cancer cells to CSC inhibitors. Interestingly, almost 8% of patient tumor samples in the The Cancer Genome Atlas (TCGA) database had the above gene signature and were associated with a significantly higher mortality. From this mechanistic insight, an additional microbial metabolite screen on H- and K-ras biosensors identified ophiobolin A and conglobatin A to specifically affect K-ras nanoclustering and to act as potential breast CSC inhibitors. In the third study, the Ras FRET-biosensor principle was used to investigate membrane anchorage and nanoclustering of myristoylated proteins such as heterotrimeric G-proteins, Yes- and Src-kinases. Furthermore, Yes-biosensor was validated to be a suitable platform for performing chemical and genetic screens to identify myristoylation inhibitors. The results of this thesis demonstrate the potential of the Ras-derived FRETbiosensor platform to differentiate and identify Ras-isoform specfic inhibitors. The results also highlight that most of the inhibitors identified predominantly perturb Ras subcellular distribution and membrane organization through some novel and yet unknown mechanisms. The results give new insights into the role of Ras nanoclusters as promising new molecular targets in cancer and in stem cells.

Internal Changes in International New Ventures During Initial Internationalization: Finnish SMEs Operating in Dynamic High-tech Industries

The purpose of this qualitative research is to study how international new ventures change internally during initial internationalization. Based on the analysis of seven INV firms, a framework illustrating this change process, will be developed. This research will also develop earlier theories, and create a solid combination of existing theories to explain the phenomenon. INV firms internationalize more rapidly and aggressively than traditional MNEs. At the same, external and internal drivers cause changes in INVs culture, resources, capabilities, strategic management, and output decisions inside the company. Organizational learning and resource acquisition through international business networks explain how INVs are able to cope with the dynamic high-technology industry and be able to adapt. Internationalization of INVs proceeds through several phases, which may be gone through rapidly due to the network effects and INVs’ special characteristics. The results of this research revealed that INVs internal change process proceeds through four phases; pre-incorporation phase, product development phase, internationalization and growth phase, and maturation phase. INVs culture, resources, capabilities, strategic management, and outputs change significantly during initial internationalization, and INVs develop from small start-ups into fully established companies.

Promoting Healthy Lifestyles with Personalized, APOE Genotype Based Health Information: The Effects on Psychological-, Health Behavioral and Clinical Factors

There is an increasing demand for individualized, genotype-based health advice. The general population-based dietary recommendations do not always motivate people to change their life-style, and partly following this, cardiovascular diseases (CVD) are a major cause of death in worldwide. Using genotype-based nutrition and health information (e.g. nutrigenetics) in health education is a relatively new approach, although genetic variation is known to cause individual differences in response to dietary factors. Response to changes in dietary fat quality varies, for example, among different APOE genotypes. Research in this field is challenging, because several non-modifiable (genetic, age, sex) and modifiable (e.g. lifestyle, dietary, physical activity) factors together and with interaction affect the risk of life-style related diseases (e.g. CVD). The other challenge is the psychological factors (e.g. anxiety, threat, stress, motivation, attitude), which also have an effect on health behavior. The genotype-based information is always a very sensitive topic, because it can also cause some negative consequences and feelings (e.g. depression, increased anxiety). The aim of this series of studies was firstly to study how individual, genotype-based health information affects an individual’s health form three aspects, and secondly whether this could be one method in the future to prevent lifestyle-related diseases, such as CVD. The first study concentrated on the psychological effects; the focus of the second study was on health behavior effects, and the third study concentrated on clinical effects. In the fourth study of this series, the focus was on all these three aspects and their associations with each other. The genetic risk and health information was the APOE gene and its effects on CVD. To study the effect of APOE genotype-based health information in prevention of CVD, a total of 151 volunteers attended the baseline assessments (T0), of which 122 healthy adults (aged 20 – 67 y) passed the inclusion criteria and started the one-year intervention. The participants (n = 122) were randomized into a control group (n = 61) and an intervention group (n = 61). There were 21 participants in the intervention Ɛ4+ group (including APOE genotypes 3/4 and 4/4) and 40 participants in the intervention Ɛ4- group (including APOE genotypes 2/3 and 3/3). The control group included 61 participants (including APOE genotypes 3/4, 4/4, 2/3, 3/3 and 2/2). The baseline (T0) and follow-up assessments (T1, T2, T3) included detailed measurements of psychological (threat and anxiety experience, stage of change), and behavioral (dietary fat quality, consumption of vegetables, - high fat/sugar foods and –alcohol, physical activity and health and taste attitudes) and clinical factors (total-, LDL- HDL cholesterol, triglycerides, blood pressure, blood glucose (0h and 2h), body mass index, waist circumference and body fat percentage). During the intervention six different communication sessions (lectures on healthy lifestyle and nutrigenomics, health messages by mail, and personal discussion with the doctor) were arranged. The intervention groups (Ɛ4+ and Ɛ4-) received their APOE genotype information and health message at the beginning of the intervention. The control group received their APOE genotype information after the intervention. For the analyses in this dissertation, the results for 106/107 participants were analyzed. In the intervention, there were 16 participants in the high-risk (Ɛ4+) group and 35 in the low-risk (Ɛ4-) group. The control group had 55 participants in studies III-IV and 56 participants in studies I-II. The intervention had both short-term (≤ 6 months) and long-term (12 months) effects on health behavior and clinical factors. The short-term effects were found in dietary fat quality and waist circumference. Dietary fat quality improved more in the Ɛ4+ group than the Ɛ4- and the control groups as the personal, genotype-based health information and waist circumference lowered more in the Ɛ4+ group compared with the control group. Both these changes differed significantly between the Ɛ4+ and control groups (p<0.05). A long-term effect was found in triglyceride values (p<0.05), which lowered more in Ɛ4+ compared with the control group during the intervention. Short-term effects were also found in the threat experience, which increased mostly in the Ɛ4+ group after the genetic feedback (p<0.05), but it decreased after 12 months, although remaining at a higher level compared to the baseline (T0). In addition, Study IV found that changes in the psychological factors (anxiety and threat experience, motivation), health and taste attitudes, and health behaviors (dietary, alcohol consumption, and physical activity) did not directly explain the changes in triglyceride values and waist circumference. However, change caused by a threat experience may have affected the change in triglycerides through total- and HDL cholesterol. In conclusion, this dissertation study has given some indications that individual, genotypebased health information could be one potential option in the future to prevent lifestyle-related diseases in public health care. The results of this study imply that personal genetic information, based on APOE, may have positive effects on dietary fat quality and some cardiovascular risk markers (e.g., improvement in triglyceride values and waist circumference). This study also suggests that psychological factors (e.g. anxiety and threat experience) may not be an obstacle for healthy people to use genotype-based health information to promote healthy lifestyles. However, even in the case of very personal health information, in order to achieve a permanent health behavior change, it is important to include attitudes and other psychological factors (e.g. motivation), as well as intensive repetition and a longer intervention duration. This research will serve as a basis for future studies and its information can be used to develop targeted interventions, including health information based on genotyping that would aim at preventing lifestyle diseases. People’s interest in personalized health advices has increased, while also the costs of genetic screening have decreased. Therefore, generally speaking, it can be assumed that genetic screening as a part of the prevention of lifestyle-related diseases may become more common in the future. In consequence, more research is required about how to make genetic screening a practical tool in public health care, and how to efficiently achieve long-term changes.

Cholesterol, cardiovascular disease and statin use in older persons

Older age increases the risk of developing a chronic atherosclerotic cardiovascular disease (CVD), such as coronary heart disease. Complications of CVDs, myocardial infarction or stroke often lead to loss of functional capacity or premature death. Dyslipidemia, high serum levels of total or low-density lipoprotein cholesterol (LDL-c) and low levels of high-density lipoprotein cholesterol (HDL-c), is among the most important modifiable risk factors for CVDs; it can be treated with lifestyle modifications, and with lipid-lowering drugs, primarily statins. In older persons, however, the association of cholesterol levels with cardiovascular and all-cause mortality has been inconsistent in previous studies. Furthermore, the beneficial effects of statins in older persons without previous CVD are still somewhat unclear, and older persons are more prone to adverse effects from statins. This thesis presents a prospective cohort study (TUVA), exploring associations of cholesterol levels with mortality and the changes in cholesterol levels of a 70-year-old population in long-term follow-up. Further, prevalence of CVDs, risk factors and preventive medication use in the TUVA cohort is compared with respective prevalences in another age-matched cohort (UTUVA) 20 years later in order to examine the changes in cardiovascular risk over time. Additionally, to evaluate statin use patterns among older persons, an observational register study was conducted covering the total Finnish population aged 70 and older during 2000-2008. Based on individual-level data retrieved from national health registries, the population was classified into low, moderate and high risk groups according to estimated CVD risk. The prevalence, incidence and persistence of statin use among the risk groups was then evaluated based upon yearly statin purchases tracked from the Prescription Register. The prospective cohort study demonstrated that low total cholesterol, LDL-c and HDL-c were associated with higher mortality in a cohort of home-dwelling 70-year-olds. However, after adjusting for traditional cardiovascular risk factors and cancer this association disappeared. Further, low total cholesterol seemed to be protective, whereas low HDL-c strongly predicted increased risk of CVD death. Cholesterol levels of those elderly who remained available for follow-up and were still home-dwelling at the age of 85 seemed to improve with advancing age. Compared to the TUVA cohort, the later born UTUVA cohort had less CVDs and their risk factors were better controlled, which was reflected in the higher use of preventive medications such as statins and antihypertensives. The register studies confirmed that statin use has increased significantly during 2000-2008 among older persons, especially among the oldest (80+) age groups and among those at high risk for cardiovascular events. Two-thirds of new statin users persisted with their use during the four years of follow-up; the most discontinuations were made during the first year of use. In conclusion, statins are commonly used among older age groups in Finland. Most of the older statin users had a high cardiovascular event risk, indicating that the treatment is well directed towards those who are likely to benefit from it the most. No age-limits should be put on the screening and treatment of dyslipidemia in older persons, but the benefits and adverse effects of statin treatment should be carefully weighed based on an individual assessment of the person’s general health status and functional capacity. Physicians should pay more attention to medication adherence, especially when prescribing preventive medications.

Fostering product innovation by learning through exporting in Eastern Europe

This study discusses the importance of learning through the process of exporting, and more specifically how such a process can enhance the product innovativeness of a company. The purpose of this study is to investigate the appropriate sources of learning and to suggest an interactive framework for how new knowledge from exporting markets can materialize itself into product innovation. The theoretical background of the study was constructed from academic literature, which is related to concepts of learning by exporting, along with sources for learning in the market and new product development. The empirical research in the form of a qualitative case study was based on four semi-structured interviews and secondary data from the case company official site. The interview data was collected between March and April 2015 from case company employees who directly work in the department of exporting and product development. The method of thematic analysis was used to categorize and interpret the collected data. What was conclusively discovered, was that the knowledge from an exporting market can be an incentive for product innovation, especially an incremental one. Foreign customers and competitors as important sources for new knowledge contribute to the innovative process. Foreign market competitors’ influence on product improvements was high only when the competitor was a market leader or held a colossal market share, while the customers’ influence is always high. Therefore, involving a foreign customer in the development of a new product is vital to a company that is interested in benefiting from what is learned through exporting. The interactive framework, which is based on the theoretical background and findings of the study, suggests that exporting companies can raise their product innovativeness by utilizing newly gained knowledge from exporting markets. Except for input, in the form of sources of learning, and product innovation as an output, the framework contains a process of knowledge transfer, the absorptive capacity of a firm and a new product development process. In addition, the framework and the findings enhance the understanding of the disputed relationship between an exporting experience and product innovation. However, future research is needed in order to fully understand all the elements of the framework, such as the absorptive capacity of a firm as well as more case companies to be processed in order to increase the generalization of the framework

Screening of power to gas projects

The purpose of this thesis was the screening of power to gas projects worldwide and reviewing the technologies used and applications for the end products. This study focuses solely on technical solutions and feasibility, economical profitability is excluded. With power grids having larger penetrations of intermittent sources such as solar and wind power, the demand and production cannot be balanced in conventional methods. Technologies for storing electric power in times of surplus production are needed, and the concept called power to gas is a solution for this problem. A total of 57 projects mostly located in Europe were reviewed by going through publications, presentations and project web pages. Hydrogen is the more popular end product over methane. Power to gas is a viable concept when power production from intermittent sources needs to be smoothed and time shifted, when carbon free fuels are produced for vehicles and when chemical industry needs carbon neutral raw materials.