Ureaplasma parvum serovar 3 multiple banded antigen size variation after chronic intra-amniotic infection/colonization

Ureaplasma species are the microorganisms most frequently associated with adverse pregnancy outcomes. The multiple banded antigen (MBA), a surface-exposed lipoprotein, is a key virulence factor of ureaplasmas. The MBA demonstrates size variation, which we have shown previously to be correlated with the severity of chorioamnion inflammation. We aimed to investigate U. parvum serovar 3 pathogenesis in vivo, using a sheep model, by investigating: MBA variation after long term (chronic) and short term (acute) durations of in utero ureaplasma infections, and the severity of chorioamnionitis and inflammation in other fetal tissues. Inocula of 2x107 colony-forming-units (CFU) of U. parvum serovar 3 (Up) or media controls (C) were injected intra-amniotically into pregnant ewes at one of three time points: day 55 (69d Up, n=8; C69, n=4); day 117 (7d Up, n=8; C7, n=2); and day 121 (3d Up, n=8; C3, n=2) of gestation (term=145-150d). At day 124, preterm fetuses were delivered surgically. Samples of chorioamnion, fetal lung, and umbilical cord were: (i) snap frozen for subsequent ureaplasma culture, and (ii) fixed, embedded, sectioned and stained by haematoxylin and eosin stain for histological analysis. Selected fetal lung clinical ureaplasma isolates were cloned and filtered to obtain cultures from a single CFU. Passage 1 and clone 2 ureaplasma cultures were tested by western blot to demonstrate MBA variation. In acute durations of ureaplasma infection no MBA variants (3d Up) or very few MBA variants (7d Up) were present when compared to the original inoculum. However, numerous MBA size variants were generated in vivo (alike within contiguous tissues, amniotic fluid and fetal lung, but different variants were present within chorioamnion), during chronic, 69d exposure to ureaplasma infection. For the first time we have shown that the degree of ureaplasma MBA variation in vivo increased with the duration of gestation.

Image-based flow visualisation (IBFV) to enhance interpretation of complex flow patterns within a shallow tidal barrier estuary

We applied a texture-based flow visualisation technique to a numerical hydrodynamic model of the Pumicestone Passage in southeast Queensland, Australia. The quality of the visualisations using our flow visualisation tool, are compared with animations generated using more traditional drogue release plot and velocity contour and vector techniques. The texture-based method is found to be far more effective in visualising advective flow within the model domain. In some instances, it also makes it easier for the researcher to identify specific hydrodynamic features within the complex flow regimes of this shallow tidal barrier estuary as compared with the direct and geometric based methods.

Asymmetrically decorated, doped porous graphene as an effective membrane for hydrogen isotope separation

We propose a new route to hydrogen isotope separation which exploits the quantum sieving effect in the context of transmission through asymmetrically decorated, doped porous graphenes. Selectivities of D2 over H2 as well as rate constants are calculated based on ab initio interaction potentials for passage through pure and nitrogen functionalized porous graphene. One-sided dressing of the membrane with metal provides the critical asymmetry needed for an energetically favorable pathway.

Editorial: The Human Fertilisation and Embryology Act 2008

This editorial first describes the workshop out of which the present special issue arose. The editors then identify the need for a multidisciplinary collection examining the Human Fertilisation and Embryology Act 2008 from both legal and political perspectives, including the consultation process, campaigning and parliamentary debates leading to its passage, and the concluded legislation and its effects. The editorial provides an overview of the legislative reform process, key legislative changes, and the various contributions to the special issue. Cross-cutting themes include the value of a qualitative, discourse-based approach to research in this area; the need to understand the 2008 Act in historical context; unforeseen practical implications of the legislative provisions; and silences and missed opportunities in the legislation. Finally, a postscript covers the changing landscape of hybrid embryo research since the passage of the Act, and the uncertain future of the Human Fertilisation and Embryology Authority at the time of writing.

Development of optimal designs of insulated rail joints

Proper functioning of Insulated Rail Joints (IRJs) is essential for the safe operation of the railway signalling systems and broken rail identification circuitries. The Conventional IRJ (CIRJ) resembles structural butt joints consisting of two pieces of rails connected together through two joint bars on either side of their web and the assembly is held together through pre-tensioned bolts. As the IRJs should maintain electrical insulation between the two rails, a gap between the rail ends must be retained at all times and all metal contacting surfaces should be electrically isolated from each other using non-conductive material. At the gap, the rail ends lose longitudinal continuity and hence the vertical sections of the rail ends are often severely damaged, especially at the railhead, due to the passage of wheels compared to other continuously welded rail sections. Fundamentally, the reason for the severe damage can be related to the singularities of the wheel-rail contact pressure and the railhead stress. No new generation designs that have emerged in the market to date have focussed on this fundamental; they only have provided attention to either the higher strength materials or the thickness of the sections of various components of the IRJs. In this thesis a novel method of shape optimisation of the railhead is developed to eliminate the pressure and stress singularities through changes to the original sharp corner shaped railhead into an arc profile in the longitudinal direction. The optimal shape of the longitudinal railhead profile has been determined using three nongradient methods in search of accuracy and efficiency: (1) Grid Search Method; (2) Genetic Algorithm Method and (3) Hybrid Genetic Algorithm Method. All these methods have been coupled with a parametric finite element formulation for the evaluation of the objective function for each iteration or generation depending on the search algorithm employed. The optimal shape derived from these optimisation methods is termed as Stress Minimised Railhead (SMRH) in this thesis. This optimal SMRH design has exhibited significantly reduced stress concentration that remains well below the yield strength of the head hardened rail steels and has shifted the stress concentration location away from the critical zone of the railhead end. The reduction in the magnitude and the relocation of the stress concentration in the SMRH design has been validated through a full scale wheel – railhead interaction test rig; Railhead strains under the loaded wheels have been recorded using a non-contact digital image correlation method. Experimental study has confirmed the accuracy of the numerical predications. Although the SMRH shaped IRJs eliminate stress singularities, they can still fail due to joint bar or bolt hole cracking; therefore, another conceptual design, termed as Embedded IRJ (EIRJ) in this thesis, with no joint bars and pre-tensioned bolts has been developed using a multi-objective optimisation formulation based on the coupled genetic algorithm – parametric finite element method. To achieve the required structural stiffness for the safe passage of the loaded wheels, the rails were embedded into the concrete of the post tensioned sleepers; the optimal solutions for the design of the EIRJ is shown to simplify the design through the elimination of the complex interactions and failure modes of the various structural components of the CIRJ. The practical applicability of the optimal shapes SMRH and EIRJ is demonstrated through two illustrative examples, termed as improved designs (IMD1 & IMD2) in this thesis; IMD1 is a combination of the CIRJ and the SMRH designs, whilst IMD2 is a combination of the EIRJ and SMRH designs. These two improved designs have been simulated for two key operating (speed and wagon load) and design (wheel diameter) parameters that affect the wheel-rail contact; the effect of these parameters has been found to be negligible to the performance of the two improved designs and the improved designs are in turn found far superior to the current designs of the CIRJs in terms of stress singularities and deformation under the passage of the loaded wheels. Therefore, these improved designs are expected to provide longer service life in relation to the CIRJs.

Fractional models for the migration of biological cells in complex spatial domains

Travelling wave phenomena are observed in many biological applications. Mathematical theory of standard reaction-diffusion problems shows that simple partial differential equations exhibit travelling wave solutions with constant wavespeed and such models are used to describe, for example, waves of chemical concentrations, electrical signals, cell migration, waves of epidemics and population dynamics. However, as in the study of cell motion in complex spatial geometries, experimental data are often not consistent with constant wavespeed. Non-local spatial models have successfully been used to model anomalous diffusion and spatial heterogeneity in different physical contexts. In this paper, we develop a fractional model based on the Fisher-Kolmogoroff equation and analyse it for its wavespeed properties, attempting to relate the numerical results obtained from our simulations to experimental data describing enteric neural crest-derived cells migrating along the intact gut of mouse embryos. The model proposed essentially combines fractional and standard diffusion in different regions of the spatial domain and qualitatively reproduces the behaviour of neural crest-derived cells observed in the caecum and the hindgut of mouse embryos during in vivo experiments.

Fundamental Tax Legislation 2013

Fundamental Tax Legislation 2013 contains the essential provisions from the primary legislation that affects Australia’s taxation system. Updated and expanded for 2013, this volume is an indispensable reference for undergraduate and postgraduate students of taxation. New in 2013 is a revised Year in Review section, which summarises the legislative developments in taxation over the previous 12 months, a listing of the passage of tax-related legislation during the last year and the inclusion of reference statistics (such as CPI quarterly figures and individual tax rates for residents and non-residents). Also, new for 2013 is a Tax Rates and Tables section which contains an accessible summary of the main tax rates and tables that students will need to refer to for their tax studies.

Development of an ultra-thin fibroin membrane for RPE cell transplantation

Purpose: One of the challenges associated with cell-based therapies for repairing the retina is the development of suitable materials on which to grow and transplant retinal cells. Using the ARPE-19 cell line, we have previously demonstrated the feasibility of growing RPE-derived cells on membranes prepared from the silk protein fibroin. The present study was aimed at developing a porous, ultra-thin fibroin membrane that might better support development of apical-basal polarity in culture, and to extend this work to primary cultures of human RPE cells. Methods: Ultra-thin fibroin membranes were prepared using a highly polished casting table coated with Topas® (a cyclic olefin copolymer) and a 1:0.03 aqueous solution of fibroin and PEO (Mv 900 000 g/mol). Following drying, the membranes were water annealed to make them water-stable, washed in water to remove PEO, sterilised by treatment with 95% ethanol, and washed extensively in saline. Primary cultures containing human RPE cells were established from donor posterior eye cups and maintained in DMEM/F12 medium supplemented with 10% fetal bovine serum and antibiotics. First passage cultures were seeded onto fibroin membranes pre-coated with vitronectin and grown for 6 weeks in medium supplemented with 1% serum. Comparative cultures were established on porous 1.0 µm pore PET membrane (Millipore) and using ARPE-19 cells. Results: The fibroin membranes displayed an average thickness of 3 µm and contained numerous dimples/pore-like structures of up to 3-5 µm in diameter. The primary cultures predominantly contained pigmented epithelial cells, but mesenchymal cells (presumed fibroblasts) were also often present. Passaged cultures appeared to attach equally well to either fibroin or PET membranes. Over time cells on either material adopted a more cobblestoned morphology. Conclusions: Progress has been made towards developing a porous ultra-thin fibroin membrane that supports cultivation of RPE cells. Further studies are required to determine the degree of membrane permeability and RPE polarity.

Pleading intention

This article considers the scope of the application of the civil liability legislation, an issue which is still being clarified by the courts, despite the passage of some ten years since the enactment of the non-uniform civil liability legislation across Australia. The introduction of the civil liability legislation has made more important the pleading of intention, in addition to negligence, so as to maximise damages awards. This involves pleading torts traditionally referred to as intentional torts – particularly trespass to the person. Such an approach is attractive for plaintiffs because, in several jurisdictions, tort claims which plead intention have been excluded from the operation of the legislative restrictions on the quantum of damages awards, and prohibitions on exemplary and aggravated damages. This approach reflects the policy that those who intend the harmful consequences of their actions should be held fully responsible.

Development and validation of a ultra performance LC-ESI/MS method for analysis of metabolic phenotypes of healthy men in day and night urine samples

Ultra-performance LC coupled to quadrupole TOF/MS (UPLC-QTOF/MS) in positive and negative ESI was developed and validated to analyze metabolite profiles for urine from healthy men during the day and at night. Data analysis using principal components analysis (PCA) revealed differences between metabolic phenotypes of urine in healthy men during the day and at night. Positive ions with mass-to-charge ratio (m/z) 310.24 (5.35 min), 286.24 (4.74 min) and 310.24 (5.63 min) were elevated in the urine from healthy men at night compared to that during the day. Negative ions elevated in day urine samples of healthy men included m/z 167.02 (0.66 min), 263.12 (2.55 min) and 191.03 (0.73 min), whilst ions m/z 212.01 (4.77 min) were at a lower concentration in urine of healthy men during the day compared to that at night. The ions m/z 212.01 (4.77 min), 191.03 (0.73 min) and 310.24 (5.35 min) preliminarily correspond to indoxyl sulfate, citric acid and N-acetylneuraminic acid, providing further support for an involvement of phenotypic difference in urine of healthy men in day and night samples, which may be associated with notably different activities of gut microbiota, velocity of tricarboxylic acid cycle and activity of sialic acid biosynthesis in healthy men as regulated by circadian rhythm of the mammalian bioclock.

Information organisation behaviours within everyday life : an exploration using the diary method

This paper presents the results from a study of information behaviours (IB), with specific focus on information- organisation-related behaviours conducted as part of a larger daily diary study with 40 participants. The findings indicate that organisation of information in everyday life is problematic due to various factors, specifically temporal and spatial ones, i.e., the passage of time, along with the difference in the physical environment between when the information was organised and when the information is retrieved. These have implications for information organisation schemas, and point toward the need for a context-sensitive model of information organisation that reflects the relation between information objects, information representation, and information users.

Sense-making across space and time : implications for the organization and findability of information

This paper presents the results from a study of information behaviors, with specific focus on information organisation-related behaviours conducted as part of a larger daily diary study with 34 participants. The findings indicate that organization of information in everyday life is a problematic area due to various factors. The self-evident one is the inter-subjectivity between the person who may have organized the information and the person looking for that same information (Berlin et. al., 1993). Increasingly though, we are not just looking for information within collections that have been designed by someone else, but within our own personal collections of information, which frequently include books, electronic files, photos, records, documents, desktops, web bookmarks, and portable devices. The passage of time between when we categorized or classified the information, and the time when we look for the same information, poses several problems of intra-subjectivity, or the difference between our own past and present perceptions of the same information. Information searching, and hence the retrieval of information from one's own collection of information in everyday life involved a spatial and temporal coordination with one's own past selves in a sort of cognitive and affective time travel, just as organizing information is a form of anticipatory coordination with one's future information needs. This has implications for finding information and also on personal information management.

Living the indie life : mapping creative teams in a 48 hour game jam and playing with data

In contemporary game development circles the ‘game making jam’ has become an important rite of passage and baptism event, an exploration space and a central indie lifestyle affirmation and community event. Game jams have recently become a focus for design researchers interested in the creative process. In this paper we tell the story of an established local game jam and our various documentation and data collection methods. We present the beginnings of the current project, which seeks to map the creative teams and their process in the space of the challenge, and which aims to enable participants to be more than the objects of the data collection. A perceived issue is that typical documentation approaches are ‘about’ the event as opposed to ‘made by’ the participants and are thus both at odds with the spirit of the jam as a phenomenon and do not really access the rich playful potential of participant experience. In the data collection and visualisation projects described here, we focus on using collected data to re-include the participants in telling stories about their experiences of the event as a place-based experience. Our goal is to find a means to encourage production of ‘anecdata’ - data based on individual story telling that is subjective, malleable, and resists collection via formal mechanisms - and to enable mimesis, or active narrating, on the part of the participants. We present a concept design for data as game based on the logic of early medieval maps and we reflect on how we could enable participation in the data collection itself.

Chinese fashion designers in Shanghai : a new perspective

Shanghai possesses an apt legacy, once referred to as “Paris of the East”. Municipal aspirations for Shanghai to assume a position among the great fashion cities of the world have been integrated in the recent re-shaping of this modern city into a role model for Chinese creative enterprise yet China is still known primarily as centre of clothing production. Increasingly however, “Made in China” is being replaced by “Created in China” drawing attention to two distinct consumer markets for Chinese designers. Fashion designers who have entered the global fashion system for education or by showing their collections have generally adopted a design aesthetic that aligns with Western markets, allowing little competitive advantage. In contrast, Chinese designers who rest their attention on the domestic Chinese market find a disparate, highly competitive marketplace. The pillars of authenticity that for foreign fashion brands extend far into their cultural and creative histories, often for many decades in the case of Louis Vuitton, Hermes and Christian Dior do not yet exist in China in this era of rapid globalisation. Here, the cultural bedrock allows these same pillars to extend only thirty years or so into the past reaching the moments when Deng Xiaoping granted China’s creative entrepreneurs passage. To this end, interviews with fashion designers in Shanghai have been undertaken during the last twelve months for a PhD dissertation. Production of culture theory has been used to identify working methods, practices of production and the social and cultural milieu necessary for designers to achieve viability. Preliminary findings indicate that some fashion designers have adopted an as-yet unexplored strategy of business and brand development with a distinct Chinese aesthetic at its core, in contrast to the clichéd cultural iconography often viewed by Western viewers as representative of Chinese creativity.

Exenatide extended-release; clinical trials, patient preference, and economic considerations

Type 2 diabetes remains an escalating world-wide problem, despite a range of treatments. The revelation that insulin secretion is under the control of a gut hormone, glucagon-like peptide 1 (GLP-1) led to a new paradigm in the management of type 2 diabetes, medicines that directly stimulate, or that prolong the actions of the endogenous GLP-1, at its receptors. Exenatide is an agonist at the GLP-1 receptors, and was initially developed as a subcutaneous twice daily medication, ExBID. The clinical trials with ExBID established a role for exenatide in the treatment of type 2 diabetes. Subsequently, once weekly exenatide (ExQW) was shown to have advantages over ExBID, and there is now more emphasis on the development of ExQW. ExQW alone reduces glycosylated haemoglobin (HbA1c) and body weight, and is well tolerated. ExQW has been compared to sitagliptin, pioglitazone and metformin, and shown to have a greater ability to reduce HbA1c than these other medicines. The only preparation of insulin, which ExQW has been compared to, is insulin glargine, and the ExQW has some favourable properties in this comparison, notably causing weight loss, compared to the gain with insulin glargine. ExQW has been compared to another GLP-1 receptor agonist, liraglutide, and ExQW is non-inferior to liraglutide in reducing HbA1c. The small amount of evidence available, shows that subjects with type 2 diabetes, prefer ExQW to ExBID, and that adherence was high to these in the clinical trial setting. Healthcare and economic modelling suggests that ExQW will reduce diabetic complications and be cost-effective, compared to other medications, with long term use. Little is known about whether subjects with type 2 diabetes prefer ExQW to other medicines, and whether adherence is good to ExQW in practice, and these important topics require further study.