Esquema de Referencia para Acoplamiento Débil entre Sistema Informático y Equipo de Producción

La meta de intercambiabilidad de piezas establecida en los sistemas de producción del siglo XIX, es ampliada en el último cuarto del siglo pasado para lograr la capacidad de fabricación de varios tipos de producto en un mismo sistema de manufactura, requerimiento impulsado por la incertidumbre del mercado. Esta incertidumbre conduce a plantear la flexibilidad como característica importante en el sistema de producción. La presente tesis se ubica en el problema de integración del sistema informático (SI) con el equipo de producción (EP) en la búsqueda de una solución que coadyuve a satisfacer los requerimientos de flexibilidad impuestas por las condiciones actuales de mercado. Se describen antecedentes de los sistemas de producción actuales y del concepto de flexibilidad. Se propone una clasificación compacta y práctica de los tipos de flexibilidad relevantes en el problema de integración SI-EP, con la finalidad de ubicar el significado de flexibilidad en el área de interés. Así mismo, las variables a manejar en la solución son clasificadas en cuatro tipos: Medio físico, lenguajes de programación y controlador, naturaleza del equipo y componentes de acoplamiento. Por otra parte, la característica de reusabilidad como un efecto importante y deseable de un sistema flexible, es planteada como meta en la solución propuesta no solo a nivel aplicación del sistema sino también a nivel de reuso de conceptos de diseño. Se propone un esquema de referencia en tres niveles de abstracción, que permita manejar y reutilizar en forma organizada el conocimiento del dominio de aplicación (integración SI-EP), el desarrollo de sistemas de aplicación genérica así como también la aplicación del mismo en un caso particular. Un análisis del concepto de acoplamiento débil (AD) es utilizado como base en la solución propuesta al problema de integración SI-EP. El desarrollo inicia identificando condiciones para la existencia del acoplamiento débil, compensadores para soportar la operación del sistema bajo AD y los efectos que ocasionan en el sistema informático los cambios en el conjunto de equipos de producción. Así mismo, se introducen como componentes principales del acoplamiento los componentes tecnológico, tarea y rol, a utilizar en el análisis de los requerimientos para el desarrollo de una solución de AD entre SI-EP. La estructura de tres niveles del esquema de referencia propuesto surge del análisis del significado de conceptos de referencia comúnmente reportados en la literatura, tales como arquitectura de referencia, modelo de referencia, marco de trabajo, entre otros. Se presenta un análisis de su significado como base para la definición de cada uno de los niveles de la estructura del esquema, pretendiendo con ello evitar la ambigüedad existente debido al uso indistinto de tales conceptos en la literatura revisada. Por otra parte, la relación entre niveles es definida tomando como base la estructura de cuatro capas planteada en el área de modelado de datos. La arquitectura de referencia, implementada en el primer nivel del esquema propuesto es utilizada como base para el desarrollo del modelo de referencia o marco de trabajo para el acoplamiento débil entre el SI y el EP. La solución propuesta es validada en la integración de un sistema informático de coordinación de flujo y procesamiento de pieza con un conjunto variable de equipos de diferentes tipos, naturaleza y fabricantes. En el ejercicio de validación se abordaron diferentes estándares y técnicas comúnmente empleadas como soporte al problema de integración a nivel componente tecnológico, tales como herramientas de cero configuración (ejemplo: plug and play), estándar OPC-UA, colas de mensajes y servicios web, permitiendo así ubicar el apoyo de estas técnicas en el ámbito del componente tecnológico y su relación con los otros componentes de acoplamiento: tarea y rol. ABSTRACT The interchangeability of parts, as a goal of manufacturing systems at the nineteenth century, is extended into the present to achieve the ability to manufacture various types of products in the same manufacturing system, requirement associated with market uncertainty. This uncertainty raises flexibility as an important feature in the production system. This thesis addresses the problem regarding integration of software system (SS) and the set of production equipment (PE); looking for a solution that contributes to satisfy the requirements of flexibility that the current market conditions impose on manufacturing, particularly to the production floor. Antecedents to actual production systems as well as the concept of flexibility are described and analyzed in detail. A practical and compact classification of flexibility types of relevance to the integration SS-EP problem is proposed with the aim to delimit the meaning of flexibility regarding the area of interest. Also, a classification for the variables involved in the integration problem is presented into four types: Physical media, programming and controller languages, equipment nature and coupling components. In addition, the characteristic of reusability that has been seen as an important and desirable effect of a flexible system is taken as a goal in the proposed solution, not only at system implementation level but also at system design level. In this direction, a reference scheme is proposed consisting of three abstraction levels to systematically support management and reuse of domain knowledge (SS-PE), development of a generic system as well as its application in a particular case. The concept of loose coupling is used as a basis in the development of the proposed solution to the problem of integration SS-EP. The first step of the development process consists of an analysis of the loose coupled concept, identifying conditions for its existence, compensators for system operation under loose coupling conditions as well as effects in the software system caused by modification in the set of production equipment. In addition coupling components: technological, task and role are introduced as main components to support the analysis of requirements regarding loose coupling of SS-PE. The three tier structure of the proposed reference scheme emerges from the analysis of reference concepts commonly reported in the literature, such as reference architecture, reference model and framework, among others. An analysis of these concepts is used as a basis for definition of the structure levels of the proposed scheme, trying to avoid the ambiguity due to the indiscriminate use of such concepts in the reviewed literature. In addition, the relation between adjacent levels of the structure is defined based on the four tiers structure commonly used in the data modelling area. The reference architecture is located as the first level in the structure of the proposed reference scheme and it is utilized as a basis for the development of the reference model or loose coupling framework for SS-PE integration. The proposed solution is validated by integrating a software system (process and piece flow coordination system) with a variable set of production equipment including different types, nature and manufacturers of equipment. Furthermore, in this validation exercise, different standards and techniques commonly used have been taken into account to support the issue of technology coupling component, such as tools for zero configuration (i.e. Plug and Play), message queues, OPC-UA standard, and web services. Through this part of the validation exercise, these integration tools are located as a part of the technological component and they are related to the role and task components of coupling.

Arquitectura de supercomputación en la nube para la resolución de problemas de optimización combinatoria

La tesis está focalizada en la resolución de problemas de optimización combinatoria, haciendo uso de las opciones tecnológicas actuales que ofrecen las tecnologías de la información y las comunicaciones, y la investigación operativa. Los problemas de optimización combinatoria se resuelven en general mediante programación lineal y metaheurísticas. La aplicación de las técnicas de resolución de los problemas de optimización combinatoria requiere de una elevada carga computacional, y los algoritmos deben diseñarse, por un lado pensando en la efectividad para encontrar buenas soluciones del problema, y por otro lado, pensando en un uso adecuado de los recursos informáticos disponibles. La programación lineal y las metaheurísticas son técnicas de resolución genéricas, que se pueden aplicar a diferentes problemas, partiendo de una base común que se particulariza para cada problema concreto. En el campo del desarrollo de software, los frameworks cumplen esa función de comenzar un proyecto con el trabajo general ya disponible, con la opción de cambiar o extender ese comportamiento base o genérico, para construir el sistema concreto, lo que permite reducir el tiempo de desarrollo, y amplía las posibilidades de éxito del proyecto. En esta tesis se han desarrollado dos frameworks de desarrollo. El framework ILP permite modelar y resolver problemas de programación lineal, de forma independiente al software de resolución de programación lineal que se utilice. El framework LME permite resolver problemas de optimización combinatoria mediante metaheurísticas. Tradicionalmente, las aplicaciones de resolución de problemas de optimización combinatoria son aplicaciones de escritorio que permiten gestionar toda la información de entrada del problema y resuelven el problema en local, con los recursos hardware disponibles. Recientemente ha aparecido un nuevo paradigma de despliegue y uso de aplicaciones que permite compartir recursos informáticos especializados por Internet. Esta nueva forma de uso de recursos informáticos es la computación en la nube, que presenta el modelo de software como servicio (SaaS). En esta tesis se ha construido una plataforma SaaS, para la resolución de problemas de optimización combinatoria, que se despliega sobre arquitecturas compuestas por procesadores multi-núcleo y tarjetas gráficas, y dispone de algoritmos de resolución basados en frameworks de programación lineal y metaheurísticas. Toda la infraestructura es independiente del problema de optimización combinatoria a resolver, y se han desarrollado tres problemas que están totalmente integrados en la plataforma SaaS. Estos problemas se han seleccionado por su importancia práctica. Uno de los problemas tratados en la tesis, es el problema de rutas de vehículos (VRP), que consiste en calcular las rutas de menor coste de una flota de vehículos, que reparte mercancías a todos los clientes. Se ha partido de la versión más clásica del problema y se han hecho estudios en dos direcciones. Por un lado se ha cuantificado el aumento en la velocidad de ejecución de la resolución del problema en tarjetas gráficas. Por otro lado, se ha estudiado el impacto en la velocidad de ejecución y en la calidad de soluciones, en la resolución por la metaheurística de colonias de hormigas (ACO), cuando se introduce la programación lineal para optimizar las rutas individuales de cada vehículo. Este problema se ha desarrollado con los frameworks ILP y LME, y está disponible en la plataforma SaaS. Otro de los problemas tratados en la tesis, es el problema de asignación de flotas (FAP), que consiste en crear las rutas de menor coste para la flota de vehículos de una empresa de transporte de viajeros. Se ha definido un nuevo modelo de problema, que engloba características de problemas presentados en la literatura, y añade nuevas características, lo que permite modelar los requerimientos de las empresas de transporte de viajeros actuales. Este nuevo modelo resuelve de forma integrada el problema de definir los horarios de los trayectos, el problema de asignación del tipo de vehículo, y el problema de crear las rotaciones de los vehículos. Se ha creado un modelo de programación lineal para el problema, y se ha resuelto por programación lineal y por colonias de hormigas (ACO). Este problema se ha desarrollado con los frameworks ILP y LME, y está disponible en la plataforma SaaS. El último problema tratado en la tesis es el problema de planificación táctica de personal (TWFP), que consiste en definir la configuración de una plantilla de trabajadores de menor coste, para cubrir una demanda de carga de trabajo variable. Se ha definido un modelo de problema muy flexible en la definición de contratos, que permite el uso del modelo en diversos sectores productivos. Se ha definido un modelo matemático de programación lineal para representar el problema. Se han definido una serie de casos de uso, que muestran la versatilidad del modelo de problema, y permiten simular el proceso de toma de decisiones de la configuración de una plantilla de trabajadores, cuantificando económicamente cada decisión que se toma. Este problema se ha desarrollado con el framework ILP, y está disponible en la plataforma SaaS. ABSTRACT The thesis is focused on solving combinatorial optimization problems, using current technology options offered by information technology and communications, and operations research. Combinatorial optimization problems are solved in general by linear programming and metaheuristics. The application of these techniques for solving combinatorial optimization problems requires a high computational load, and algorithms are designed, on the one hand thinking to find good solutions to the problem, and on the other hand, thinking about proper use of the available computing resources. Linear programming and metaheuristic are generic resolution techniques, which can be applied to different problems, beginning with a common base that is particularized for each specific problem. In the field of software development, frameworks fulfill this function that allows you to start a project with the overall work already available, with the option to change or extend the behavior or generic basis, to build the concrete system, thus reducing the time development, and expanding the possibilities of success of the project. In this thesis, two development frameworks have been designed and developed. The ILP framework allows to modeling and solving linear programming problems, regardless of the linear programming solver used. The LME framework is designed for solving combinatorial optimization problems using metaheuristics. Traditionally, applications for solving combinatorial optimization problems are desktop applications that allow the user to manage all the information input of the problem and solve the problem locally, using the available hardware resources. Recently, a new deployment paradigm has appeared, that lets to share hardware and software resources by the Internet. This new use of computer resources is cloud computing, which presents the model of software as a service (SaaS). In this thesis, a SaaS platform has been built for solving combinatorial optimization problems, which is deployed on architectures, composed of multi-core processors and graphics cards, and has algorithms based on metaheuristics and linear programming frameworks. The SaaS infrastructure is independent of the combinatorial optimization problem to solve, and three problems are fully integrated into the SaaS platform. These problems have been selected for their practical importance. One of the problems discussed in the thesis, is the vehicle routing problem (VRP), which goal is to calculate the least cost of a fleet of vehicles, which distributes goods to all customers. The VRP has been studied in two directions. On one hand, it has been quantified the increase in execution speed when the problem is solved on graphics cards. On the other hand, it has been studied the impact on execution speed and quality of solutions, when the problem is solved by ant colony optimization (ACO) metaheuristic, and linear programming is introduced to optimize the individual routes of each vehicle. This problem has been developed with the ILP and LME frameworks, and is available in the SaaS platform. Another problem addressed in the thesis, is the fleet assignment problem (FAP), which goal is to create lower cost routes for a fleet of a passenger transport company. It has been defined a new model of problem, which includes features of problems presented in the literature, and adds new features, allowing modeling the business requirements of today's transport companies. This new integrated model solves the problem of defining the flights timetable, the problem of assigning the type of vehicle, and the problem of creating aircraft rotations. The problem has been solved by linear programming and ACO. This problem has been developed with the ILP and LME frameworks, and is available in the SaaS platform. The last problem discussed in the thesis is the tactical planning staff problem (TWFP), which is to define the staff of lower cost, to cover a given work load. It has been defined a very rich problem model in the definition of contracts, allowing the use of the model in various productive sectors. It has been defined a linear programming mathematical model to represent the problem. Some use cases has been defined, to show the versatility of the model problem, and to simulate the decision making process of setting up a staff, economically quantifying every decision that is made. This problem has been developed with the ILP framework, and is available in the SaaS platform.

Co-simulation Methodologies for Hybrid and Electric Vehicle Dynamics

In recent decades, full electric and hybrid electric vehicles have emerged as an alternative to conventional cars due to a range of factors, including environmental and economic aspects. These vehicles are the result of considerable efforts to seek ways of reducing the use of fossil fuel for vehicle propulsion. Sophisticated technologies such as hybrid and electric powertrains require careful study and optimization. Mathematical models play a key role at this point. Currently, many advanced mathematical analysis tools, as well as computer applications have been built for vehicle simulation purposes. Given the great interest of hybrid and electric powertrains, along with the increasing importance of reliable computer-based models, the author decided to integrate both aspects in the research purpose of this work. Furthermore, this is one of the first final degree projects held at the ETSII (Higher Technical School of Industrial Engineers) that covers the study of hybrid and electric propulsion systems. The present project is based on MBS3D 2.0, a specialized software for the dynamic simulation of multibody systems developed at the UPM Institute of Automobile Research (INSIA). Automobiles are a clear example of complex multibody systems, which are present in nearly every field of engineering. The work presented here benefits from the availability of MBS3D software. This program has proven to be a very efficient tool, with a highly developed underlying mathematical formulation. On this basis, the focus of this project is the extension of MBS3D features in order to be able to perform dynamic simulations of hybrid and electric vehicle models. This requires the joint simulation of the mechanical model of the vehicle, together with the model of the hybrid or electric powertrain. These sub-models belong to completely different physical domains. In fact the powertrain consists of energy storage systems, electrical machines and power electronics, connected to purely mechanical components (wheels, suspension, transmission, clutch…). The challenge today is to create a global vehicle model that is valid for computer simulation. Therefore, the main goal of this project is to apply co-simulation methodologies to a comprehensive model of an electric vehicle, where sub-models from different areas of engineering are coupled. The created electric vehicle (EV) model consists of a separately excited DC electric motor, a Li-ion battery pack, a DC/DC chopper converter and a multibody vehicle model. Co-simulation techniques allow car designers to simulate complex vehicle architectures and behaviors, which are usually difficult to implement in a real environment due to safety and/or economic reasons. In addition, multi-domain computational models help to detect the effects of different driving patterns and parameters and improve the models in a fast and effective way. Automotive designers can greatly benefit from a multidisciplinary approach of new hybrid and electric vehicles. In this case, the global electric vehicle model includes an electrical subsystem and a mechanical subsystem. The electrical subsystem consists of three basic components: electric motor, battery pack and power converter. A modular representation is used for building the dynamic model of the vehicle drivetrain. This means that every component of the drivetrain (submodule) is modeled separately and has its own general dynamic model, with clearly defined inputs and outputs. Then, all the particular submodules are assembled according to the drivetrain configuration and, in this way, the power flow across the components is completely determined. Dynamic models of electrical components are often based on equivalent circuits, where Kirchhoff’s voltage and current laws are applied to draw the algebraic and differential equations. Here, Randles circuit is used for dynamic modeling of the battery and the electric motor is modeled through the analysis of the equivalent circuit of a separately excited DC motor, where the power converter is included. The mechanical subsystem is defined by MBS3D equations. These equations consider the position, velocity and acceleration of all the bodies comprising the vehicle multibody system. MBS3D 2.0 is entirely written in MATLAB and the structure of the program has been thoroughly studied and understood by the author. MBS3D software is adapted according to the requirements of the applied co-simulation method. Some of the core functions are modified, such as integrator and graphics, and several auxiliary functions are added in order to compute the mathematical model of the electrical components. By coupling and co-simulating both subsystems, it is possible to evaluate the dynamic interaction among all the components of the drivetrain. ‘Tight-coupling’ method is used to cosimulate the sub-models. This approach integrates all subsystems simultaneously and the results of the integration are exchanged by function-call. This means that the integration is done jointly for the mechanical and the electrical subsystem, under a single integrator and then, the speed of integration is determined by the slower subsystem. Simulations are then used to show the performance of the developed EV model. However, this project focuses more on the validation of the computational and mathematical tool for electric and hybrid vehicle simulation. For this purpose, a detailed study and comparison of different integrators within the MATLAB environment is done. Consequently, the main efforts are directed towards the implementation of co-simulation techniques in MBS3D software. In this regard, it is not intended to create an extremely precise EV model in terms of real vehicle performance, although an acceptable level of accuracy is achieved. The gap between the EV model and the real system is filled, in a way, by introducing the gas and brake pedals input, which reflects the actual driver behavior. This input is included directly in the differential equations of the model, and determines the amount of current provided to the electric motor. For a separately excited DC motor, the rotor current is proportional to the traction torque delivered to the car wheels. Therefore, as it occurs in the case of real vehicle models, the propulsion torque in the mathematical model is controlled through acceleration and brake pedal commands. The designed transmission system also includes a reduction gear that adapts the torque coming for the motor drive and transfers it. The main contribution of this project is, therefore, the implementation of a new calculation path for the wheel torques, based on performance characteristics and outputs of the electric powertrain model. Originally, the wheel traction and braking torques were input to MBS3D through a vector directly computed by the user in a MATLAB script. Now, they are calculated as a function of the motor current which, in turn, depends on the current provided by the battery pack across the DC/DC chopper converter. The motor and battery currents and voltages are the solutions of the electrical ODE (Ordinary Differential Equation) system coupled to the multibody system. Simultaneously, the outputs of MBS3D model are the position, velocity and acceleration of the vehicle at all times. The motor shaft speed is computed from the output vehicle speed considering the wheel radius, the gear reduction ratio and the transmission efficiency. This motor shaft speed, somehow available from MBS3D model, is then introduced in the differential equations corresponding to the electrical subsystem. In this way, MBS3D and the electrical powertrain model are interconnected and both subsystems exchange values resulting as expected with tight-coupling approach.When programming mathematical models of complex systems, code optimization is a key step in the process. A way to improve the overall performance of the integration, making use of C/C++ as an alternative programming language, is described and implemented. Although this entails a higher computational burden, it leads to important advantages regarding cosimulation speed and stability. In order to do this, it is necessary to integrate MATLAB with another integrated development environment (IDE), where C/C++ code can be generated and executed. In this project, C/C++ files are programmed in Microsoft Visual Studio and the interface between both IDEs is created by building C/C++ MEX file functions. These programs contain functions or subroutines that can be dynamically linked and executed from MATLAB. This process achieves reductions in simulation time up to two orders of magnitude. The tests performed with different integrators, also reveal the stiff character of the differential equations corresponding to the electrical subsystem, and allow the improvement of the cosimulation process. When varying the parameters of the integration and/or the initial conditions of the problem, the solutions of the system of equations show better dynamic response and stability, depending on the integrator used. Several integrators, with variable and non-variable step-size, and for stiff and non-stiff problems are applied to the coupled ODE system. Then, the results are analyzed, compared and discussed. From all the above, the project can be divided into four main parts: 1. Creation of the equation-based electric vehicle model; 2. Programming, simulation and adjustment of the electric vehicle model; 3. Application of co-simulation methodologies to MBS3D and the electric powertrain subsystem; and 4. Code optimization and study of different integrators. Additionally, in order to deeply understand the context of the project, the first chapters include an introduction to basic vehicle dynamics, current classification of hybrid and electric vehicles and an explanation of the involved technologies such as brake energy regeneration, electric and non-electric propulsion systems for EVs and HEVs (hybrid electric vehicles) and their control strategies. Later, the problem of dynamic modeling of hybrid and electric vehicles is discussed. The integrated development environment and the simulation tool are also briefly described. The core chapters include an explanation of the major co-simulation methodologies and how they have been programmed and applied to the electric powertrain model together with the multibody system dynamic model. Finally, the last chapters summarize the main results and conclusions of the project and propose further research topics. In conclusion, co-simulation methodologies are applicable within the integrated development environments MATLAB and Visual Studio, and the simulation tool MBS3D 2.0, where equation-based models of multidisciplinary subsystems, consisting of mechanical and electrical components, are coupled and integrated in a very efficient way.

Hybrid wind-diesel power plant valuation and optimization using real option theory and dynamic programming

El sistema de energía eólica-diesel híbrido tiene un gran potencial en la prestación de suministro de energía a comunidades remotas. En comparación con los sistemas tradicionales de diesel, las plantas de energía híbridas ofrecen grandes ventajas tales como el suministro de capacidad de energía extra para "microgrids", reducción de los contaminantes y emisiones de gases de efecto invernadero, y la cobertura del riesgo de aumento inesperado del precio del combustible. El principal objetivo de la presente tesis es proporcionar nuevos conocimientos para la evaluación y optimización de los sistemas de energía híbrido eólico-diesel considerando las incertidumbres. Dado que la energía eólica es una variable estocástica, ésta no puede ser controlada ni predecirse con exactitud. La naturaleza incierta del viento como fuente de energía produce serios problemas tanto para la operación como para la evaluación del valor del sistema de energía eólica-diesel híbrido. Por un lado, la regulación de la potencia inyectada desde las turbinas de viento es una difícil tarea cuando opera el sistema híbrido. Por otro lado, el bene.cio económico de un sistema eólico-diesel híbrido se logra directamente a través de la energía entregada a la red de alimentación de la energía eólica. Consecuentemente, la incertidumbre de los recursos eólicos incrementa la dificultad de estimar los beneficios globales en la etapa de planificación. La principal preocupación del modelo tradicional determinista es no tener en cuenta la incertidumbre futura a la hora de tomar la decisión de operación. Con lo cual, no se prevé las acciones operativas flexibles en respuesta a los escenarios futuros. El análisis del rendimiento y simulación por ordenador en el Proyecto Eólico San Cristóbal demuestra que la incertidumbre sobre la energía eólica, las estrategias de control, almacenamiento de energía, y la curva de potencia de aerogeneradores tienen un impacto significativo sobre el rendimiento del sistema. En la presente tesis, se analiza la relación entre la teoría de valoración de opciones y el proceso de toma de decisiones. La opción real se desarrolla con un modelo y se presenta a través de ejemplos prácticos para evaluar el valor de los sistemas de energía eólica-diesel híbridos. Los resultados muestran que las opciones operacionales pueden aportar un valor adicional para el sistema de energía híbrida, cuando esta flexibilidad operativa se utiliza correctamente. Este marco se puede aplicar en la optimización de la operación a corto plazo teniendo en cuenta la naturaleza dependiente de la trayectoria de la política óptima de despacho, dadas las plausibles futuras realizaciones de la producción de energía eólica. En comparación con los métodos de valoración y optimización existentes, el resultado del caso de estudio numérico muestra que la política de operación resultante del modelo de optimización propuesto presenta una notable actuación en la reducción del con- sumo total de combustible del sistema eólico-diesel. Con el .n de tomar decisiones óptimas, los operadores de plantas de energía y los gestores de éstas no deben centrarse sólo en el resultado directo de cada acción operativa, tampoco deberían tomar decisiones deterministas. La forma correcta es gestionar dinámicamente el sistema de energía teniendo en cuenta el valor futuro condicionado en cada opción frente a la incertidumbre. ABSTRACT Hybrid wind-diesel power systems have a great potential in providing energy supply to remote communities. Compared with the traditional diesel systems, hybrid power plants are providing many advantages such as providing extra energy capacity to the micro-grid, reducing pollution and greenhouse-gas emissions, and hedging the risk of unexpected fuel price increases. This dissertation aims at providing novel insights for assessing and optimizing hybrid wind-diesel power systems considering the related uncertainties. Since wind power can neither be controlled nor accurately predicted, the energy harvested from a wind turbine may be considered a stochastic variable. This uncertain nature of wind energy source results in serious problems for both the operation and value assessment of the hybrid wind-diesel power system. On the one hand, regulating the uncertain power injected from wind turbines is a difficult task when operating the hybrid system. On the other hand, the economic profit of a hybrid wind-diesel system is achieved directly through the energy delivered to the power grid from the wind energy. Therefore, the uncertainty of wind resources has increased the difficulty in estimating the total benefits in the planning stage. The main concern of the traditional deterministic model is that it does not consider the future uncertainty when making the dispatch decision. Thus, it does not provide flexible operational actions in response to the uncertain future scenarios. Performance analysis and computer simulation on the San Cristobal Wind Project demonstrate that the wind power uncertainty, control strategies, energy storage, and the wind turbine power curve have a significant impact on the performance of the system. In this dissertation, the relationship between option pricing theory and decision making process is discussed. A real option model is developed and presented through practical examples for assessing the value of hybrid wind-diesel power systems. Results show that operational options can provide additional value to the hybrid power system when this operational flexibility is correctly utilized. This framework can be applied in optimizing short term dispatch decisions considering the path-dependent nature of the optimal dispatch policy, given the plausible future realizations of the wind power production. Comparing with the existing valuation and optimization methods, result from numerical example shows that the dispatch policy resulting from the proposed optimization model exhibits a remarkable performance in minimizing the total fuel consumption of the wind-diesel system. In order to make optimal decisions, power plant operators and managers should not just focus on the direct outcome of each operational action; neither should they make deterministic decisions. The correct way is to dynamically manage the power system by taking into consideration the conditional future value in each option in response to the uncertainty.

Espacio web para el diseño de un museo virtual de la historia de la informática

El objetivo principal de crear un espacio web para el Museo Histórico de la Informática (MHI) perteneciente a la Escuela Técnica Superior de Ingenieros Informáticos (ETSIINF) de la Universidad Politécnica de Madrid (UPM) es la difusión de la historia de la informática entre el público en general. Si bien es cierto que existe ya una página web de consulta del MHI con algunas imágenes y contenido sobre los objetos que allí se exhiben, es también reseñable que se trata de un espacio obsoleto, lleno de carencias y extremadamente difícil de gestionar y actualizar, por lo que se hacía imprescindible actualizar el diseño del espacio web, los contenidos y el sistema de gestión de los mismos, cosa que es de gran interés para un lugar divulgativo. En la actualidad, existen maneras mucho más amigables para el usuario de navegar por una web; y de la misma manera para un administrador, gestionar el contenido de la misma y mantener a los usuarios bien informados de todo lo que se ofrece en cada momento. Esto es posible gracias a los sistemas de gestión de contenidos o content management system (CMS), de los que se hablará lo largo de todo el documento. Estos sistemas, dan una facilidad mucho mayor a los encargados de llevar al día una página web, sin tener que saber de programación, lenguajes o informática en general, ya que incorporan paneles de control muy intuitivos y fáciles de manejar, que son una ventaja tanto para ellos como para los usuarios. Es por esta razón que, hay páginas web como la de las empresas IKEA, Ubuntu o, en especial para el caso que compete al documento, el museo del Louvre usan gestores de contenidos para sus páginas web. Y es que las ventajas y facilidades que ofrece un CMS son realmente interesantes y se tratará de todas ellas en el documento, de la elección del CMS que mejor se ajusta a los requisitos del museo, las restricciones a la hora del despliegue en el ámbito de la ETSIINF y de cómo mejorará esto la calidad visual y divulgativa del MHI. Este trabajo se desarrolla a lo largo de 11 capítulos, en los que se muestra como construir un sitio web, las posibilidades y la elección final para este caso. En el primer capítulo se hace una pequeña introducción de lo que es el proyecto, se especifican los objetivos, la motivación del mismo y el alcance que tiene. En el segundo capítulo se muestra la información que se ha recopilado en el trabajo de investigación que se hace previo al desarrollo. En él se muestran los distintos tipos de páginas web, que tecnologías y lenguajes se pueden usar para su construcción, una comparativa sobre otras entidades similares al MHI, las limitaciones que presenta el entorno y la elección final que se consideró más adecuada para este caso. En el capítulo tres se empieza a desarrollar la solución a través del diseño. Aquí se puede encontrar el diseño de más bajo nivel que se le presenta al cliente para sentar las bases del trabajo, el diseño de alto nivel con un mayor grado de realidad que el anterior y una preparación de lo que serán los planes de prueba. El capítulo cuatro muestra todo lo que se ha usado en la implementación y la integración de la página web: herramientas, tecnologías, plantillas de diseño y módulos que proporcionan distintas funcionalidades. Llegados al capítulo cinco, se puede ver una detallada documentación de los resultados de las pruebas de usabilidad y accesibilidad realizadas, y las conclusiones que subyacen de estas. Una vez acabada la implementación del sitio web del MHI, en el capítulo seis se intenta hacer una labor de consultoría, mostrando precios y presupuestos de las distintas tareas que se han llevado a cabo para la realización de este proyecto. En el capítulo siete se extraen las conclusiones de todo lo acontecido en los capítulos anteriores y en el ocho unas líneas sobre posibles trabajos futuros que se podrían llevar a cabo en base a lo que ya se tiene en la institución, incluido este trabajo. Para facilitar la comprensión y satisfacer la curiosidad del lector, se ha incluido en el capítulo nueve la bibliografía con toda la documentación consultada y en el diez un glosario de términos para la aclaración de términos y acrónimos más técnicos. Para acabar, en el capítulo once se anexionan tanto el documento que se usó para las pruebas de usabilidad como un manual de administrador para el sitio web, que hace más amigable el entorno para las personas que lo tengan que mantener en un futuro.---ABSTRACT---The main goal of creating a website for the Informatics Historical Museum (“Museo Histórico de la Informática” or MHI) located in the Higher Technical School of Informatics Engineers (“Escuela Técnica Superior de Ingenieros Informáticos” or ETSIINF) of the Polytechnic University of Madrid (“Universidad Politécnica de Madrid” UPM), is to promote the aforementioned museum as to increase its reach to the public. While it is true that there already is a consulting website with some pictures and information about the items which are displayed in the building, it is outdated and the data is scarce. Moreover, it is extremely complicated to manage and to regularly update the web page, which is very important for informative/broadcasting media. Currently, there are easier ways for the users of a website to consult whatever information they want, as well as it is now easy for a website manager to display new content and to keep the users informed about what is been offered at every moment. This is possible because of content management systems (CMS), which will be discussed throughout the entire paper. These systems make it easier to use for the administrator of a website to keep it up to date without the necessity for them of having any knowledge or skills in programming, languages or computing, because the systems have an intuitive control panel that is easy to use, which is an advantage for both managers and users. Because of all these reasons, there are lots of companies that use this kind of systems, such as IKEA, Ubuntu or, especially, the Louvre Museum, to which we direct our attention all throughout this report. It is easy to notice that these systems have an important and very interesting number of perks and benefits. In the next chapters of the document we will explain the benefits of the program as well as the choice on the kind of CMS that best suits the requirements of the museum and, finally, the restrictions of the school for the deployment and of how all of this will improve the visual and informational qualities of the MHI. This work is developed over 11 chapters, shown how to build up a website, the possibilities and the final choice for this case. In the first chapter a brief introduction of the project, goals, motivation and scope thereof having specified are done. Before the development of the website, the second chapter shows de information of the researching work. It discusses the different types of websites, technologies and languages that can be used for build-up, a comparison of similar entities to MHI, the limitations of the environment and the final choice was considered more appropriate for this case. Chapter three begins to develop the design of the solution. Here there are the lowest level design that presents the customer to fix any problem, the high level design with a higher degree of reality than the last and the test plans. Chapter four shows everything that has been used in the implementation and integration of the website: tools, technologies, design templates and modules that provide different functionalities. Reaching the fifth chapter, you can see a detailed documentation of the results of the usability and accessibility tests made to some users and the conclusions of it. Once the implementation of MHI website is done, in chapter six there is a consultancy work, showing prices and budgets of the different tasks which were carried out for this project. In chapter seven there are the conclusions of what happened in the previous chapters and eight chapter shows possible future works that could be carried out based on what the institution already have, including this work. To make easier to the reader understand this paper and satisfy his curiosity, the chapter nine includes the bibliography consulted with all the documentation and chapter ten has a glossary of terms and an explanation of technical terms and acronyms. Finally, in chapter eleven there are attached both the document that was used for usability testing as a manual administrator for the website, making the environment friendlier for people who have to maintain it in the future.

Telemetría de vehículos FSAE con microcontrolador PIC32 y transceptor de radio CC1101

Quizás el campo de las telecomunicaciones sea uno de los campos en el que más se ha progresado en este último siglo y medio, con la ayuda de otros campos de la ciencia y la técnica tales como la computación, la física electrónica, y un gran número de disciplinas, que se han utilizado estos últimos 150 años en conjunción para mejorarse unas con la ayuda de otras. Por ejemplo, la química ayuda a comprender y mejorar campos como la medicina, que también a su vez se ve mejorada por los progresos en la electrónica creados por los físicos y químicos, que poseen herramientas más potentes para calcular y simular debido a los progresos computacionales. Otro de los campos que ha sufrido un gran avance en este último siglo es el de la automoción, aunque estancados en el motor de combustión, los vehículos han sufrido enormes cambios debido a la irrupción de los avances en la electrónica del automóvil con multitud de sistemas ya ampliamente integrados en los vehículos actuales. La Formula SAE® o Formula Student es una competición de diseño, organizada por la SAE International (Society of Automotive Engineers) para estudiantes de universidades de todo el mundo que promueve la ingeniería a través de una competición donde los miembros del equipo diseñan, construyen, desarrollan y compiten en un pequeño y potente monoplaza. En el ámbito educativo, evitando el sistema tradicional de clases magistrales, se introducen cambios en las metodologías de enseñanza y surge el proyecto de la Fórmula Student para lograr una mejora en las acciones formativas, que permitan ir incorporando nuevos objetivos y diseñar nuevas situaciones de aprendizaje que supongan una oportunidad para el desarrollo de competencias de los alumnos, mejorar su formación como ingenieros y contrastar sus progresos compitiendo con las mejores universidades del mundo. En este proyecto se pretende dotar a los alumnos de las escuelas de ingeniería de la UPM que desarrollan el vehículo de FSAE de una herramienta de telemetría con la que evaluar y probar comportamiento del vehículo de FSAE junto con sus subsistemas que ellos mismos diseñan, con el objetivo de evaluar el comportamiento, introducir mejoras, analizar resultados de una manera más rápida y cómoda, con el objetivo de poder progresar más rápidamente en su desarrollo, recibiendo y almacenando una realimentación directa e instantánea del funcionamiento mediante la lectura de los datos que circulan por el bus CAN del vehículo. También ofrece la posibilidad de inyectar datos a los sistemas conectados al bus CAN de manera remota. Se engloba en el conjunto de proyectos de la FSAE, más concretamente en los basados en la plataforma PIC32 y propone una solución conjunta con otros proyectos o también por sí sola. Para la ejecución del proyecto se fabricó una placa compuesta de dos placas de circuito impreso, la de la estación base que envía comandos, instrucciones y datos para inyectar en el bus CAN del vehículo mediante radiofrecuencia y la placa que incorpora el vehículo que envía las tramas que circulan por el bus CAN del vehículo con los identificadores deseados, ejecuta los comandos recibidos por radiofrecuencia y salva las tramas CAN en una memoria USB o SD Card. Las dos PCBs constituyen el hardware del proyecto. El software se compone de dos programas. Un programa para la PCB del vehículo que emite los datos a la estación base, codificado en lenguaje C con ayuda del entorno de desarrollo MPLAB de Microchip. El otro programa hecho con LabView para la PCB de la estación base que recibe los datos provenientes del vehículo y los interpreta. Se propone un hardware y una capa o funciones de software para los microcontroladores PIC32 (similar al de otros proyectos del FSAE) para la transmisión de las tramas del bus CAN del vehículo de manera inalámbrica a una estación base, capaz de insertar tramas en el bus CAN del vehículo enviadas desde la estación base. También almacena estas tramas CAN en un dispositivo USB o SD Card situado en el vehículo. Para la transmisión de los datos se hizo un estudio de las frecuencias de transmisión, la legislación aplicable y los tipos de transceptores. Se optó por utilizar la banda de radiofrecuencia de uso común ISM de 433MHz mediante el transceptor integrado CC110L de Texas Instruments altamente configurable y con interfaz SPI. Se adquirieron dos parejas de módulos compatibles, con amplificador de potencia o sin él. LabView controla la estación que recoge las tramas CAN vía RF y está dotada del mismo transceptor de radio junto con un puente de comunicaciones SPI-USB, al que se puede acceder de dos diferentes maneras, mediante librerías dll, o mediante NI-VISA con transferencias RAW-USB. La aplicación desarrollada posee una interfaz configurable por el usuario para la muestra de los futuros sensores o actuadores que se incorporen en el vehículo y es capaz de interpretar las tramas CAN, mostrarlas, gráfica, numéricamente y almacenar esta información, como si fuera el cuadro de instrumentos del vehículo. Existe una limitación de la velocidad global del sistema en forma de cuello de botella que se crea debido a las limitaciones del transceptor CC110L por lo que si no se desea filtrar los datos que se crean necesarios, sería necesario aumentar el número de canales de radio para altas ocupaciones del bus CAN. Debido a la pérdida de relaciones con el INSIA, no se pudo probar de manera real en el propio vehículo, pero se hicieron pruebas satisfactorias (hasta 1,6 km) con una configuración de tramas CAN estándar a una velocidad de transmisión de 1 Mbit/s y un tiempo de bit de 1 microsegundo. El periférico CAN del PIC32 se programará para cumplir con estas especificaciones de la ECU del vehículo, que se presupone que es la MS3 Sport de Bosch, de la que LabView interpretará las tramas CAN recibidas de manera inalámbrica. Para poder probar el sistema, ha sido necesario reutilizar el hardware y adaptar el software del primer prototipo creado, que emite tramas CAN preprogramadas con una latencia también programable y que simulará al bus CAN proporcionando los datos a transmitir por el sistema que incorpora el vehículo. Durante el desarrollo de este proyecto, en las etapas finales, el fabricante del puente de comunicaciones SPI-USB MCP2210 liberó una librería (dll) compatible y sin errores, por lo que se nos ofrecía una oportunidad interesante para la comparación de las velocidades de acceso al transceptor de radio, que se presuponía y se comprobó más eficiente que la solución ya hecha mediante NI-VISA. ABSTRACT. The Formula SAE competition is an international university applied to technological innovation in vehicles racing type formula, in which each team, made up of students, should design, construct and test a prototype each year within certain rules. The challenge of FSAE is that it is an educational project farther away than a master class. The goal of the present project is to make a tool for other students to use it in his projects related to FSAE to test and improve the vehicle, and, the improvements that can be provided by the electronics could be materialized in a victory and win the competition with this competitive advantage. A telemetry system was developed. It sends the data provided by the car’s CAN bus through a radio frequency transceiver and receive commands to execute on the system, it provides by a base station on the ground. Moreover, constant verification in real time of the status of the car or data parameters like the revolutions per minute, pressure from collectors, water temperature, and so on, can be accessed from the base station on the ground, so that, it could be possible to study the behaviour of the vehicle in early phases of the car development. A printed circuit board, composed of two boards, and two software programs in two different languages, have been developed, and built for the project implementation. The software utilized to design the PCB is Orcad10.5/Layout. The base station PCB on a PC receives data from the PCB connected to the vehicle’s CAN bus and sends commands like set CAN filters or masks, activate data logger or inject CAN frames. This PCB is connected to a PC via USB and contains a bridge USB-SPI to communicate with a similar transceiver on the vehicle PCB. LabView controls this part of the system. A special virtual Instrument (VI) had been created in order to add future new elements to the vehicle, is a dashboard, which reads the data passed from the main VI and represents them graphically to studying the behaviour of the car on track. In this special VI other alums can make modifications to accommodate the data provided from the vehicle CAN’s bus to new elements on the vehicle, show or save the CAN frames in the form or format they want. Two methods to access to SPI bus of CC110l RF transceiver over LabView have been developed with minimum changes between them. Access through NI-VISA (Virtual Instrument Software Architecture) which is a standard for configuring, programming, USB interfaces or other devices in National Instruments LabView. And access through DLL (dynamic link library) supplied by the manufacturer of the bridge USB-SPI, Microchip. Then the work is done in two forms, but the dll solution developed shows better behaviour, and increase the speed of the system because has less overload of the USB bus due to a better efficiency of the dll solution versus VISA solution. The PCB connected to the vehicle’s CAN bus receives commands from the base station PCB on a PC, and, acts in function of the command or execute actions like to inject packets into CAN bus or activate data logger. Also sends over RF the CAN frames present on the bus, which can be filtered, to avoid unnecessary radio emissions or overflowing the RF transceiver. This PCB consists of two basic pieces: A microcontroller with 32 bit architecture PIC32MX795F512L from Microchip and the radio transceiver integrated circuit CC110l from Texas Instruments. The PIC32MX795F512L has an integrated CAN and several peripherals like SPI controllers that are utilized to communicate with RF transceiver and SD Card. The USB controller on the PIC32 is utilized to store CAN data on a USB memory, and change notification peripheral is utilized like an external interrupt. Hardware for other peripherals is accessible. The software part of this PCB is coded in C with MPLAB from Microchip, and programming over PICkit 3 Programmer, also from Microchip. Some of his libraries have been modified to work properly with this project and other was created specifically for this project. In the phase for RF selection and design is made a study to clarify the general aspects of regulations for the this project in order to understand it and select the proper band, frequency, and radio transceiver for the activities developed in the project. From the different options available it selects a common use band ICM, with less regulation and free to emit with restrictions and disadvantages like high occupation. The transceiver utilized to transmit and receive the data CC110l is an integrated circuit which needs fewer components from Texas Instruments and it can be accessed through SPI bus. Basically is a state machine which changes his state whit commands received over an SPI bus or internal events. The transceiver has several programmable general purpose Inputs and outputs. These GPIOs are connected to PIC32 change notification input to generate an interrupt or connected to GPIO to MCP2210 USB-SPI bridge to inform to the base station for a packet received. A two pair of modules of CC110l radio module kit from different output power has been purchased which includes an antenna. This is to keep away from fabrication mistakes in RF hardware part or designs, although reference design and gerbers files are available on the webpage of the chip manufacturer. A neck bottle is present on the complete system, because the maximum data rate of CC110l transceiver is a half than CAN bus data rate, hence for high occupation of CAN bus is recommendable to filter the data or add more radio channels, because the buffers can’t sustain this load along the time. Unfortunately, during the development of the project, the relations with the INSIA, who develops the vehicle, was lost, for this reason, will be made impossible to test the final phases of the project like integration on the car, final test of integration, place of the antenna, enclosure of the electronics, connectors selection, etc. To test or evaluate the system, it was necessary to simulate the CAN bus with a hardware to feed the system with entry data. An early hardware prototype was adapted his software to send programed CAN frames at a fixed data rate and certain timing who simulate several levels of occupation of the CAN Bus. This CAN frames emulates the Bosch ECU MS3 Sport.

Avances tecnológicos y obsolescencia programada

El objetivo seguido en este proyecto fin de carrera, ha sido el análisis de la evolución general de la tecnología, tanto electrónica, como en Telecomunicaciones e Informática, desde sus inicios hasta la actualidad, realizando un estudio sobre cómo esos avances han mejorado, incluso cambiado nuestra vida cotidiana y cómo a consecuencia de la conversión de muchos de estos productos tecnológicos en objeto de consumo masivo, la propia dinámica económico-comercial ha llevado a las empresas a la programación del fin del su vida útil con el objeto de incrementar su demanda y, consiguientemente, la producción. Se trata de lo que se conoce desde hace décadas como Obsolescencia Programada. Para realizar este documento se ha realizado un breve repaso por los acontecimientos históricos que promovieron el inicio de esta práctica, así como también nos ha llevado a realizar mención de todos esos aparatos tecnológicos que han sufrido una mayor evolución y por tanto son los más propensos a que se instauren en ellos, debido a cómo influyen dichos cambios en los consumidores. Otro de los aspectos más importantes que rodean a la Obsolescencia Programada, es cómo influye en el comportamiento de la sociedad, creando en ella actitudes consumistas, que precisamente son las que alimentan que el ciclo económico siga basándose en incluir esta práctica desde el diseño del producto, puesto que a mayor consumo, mayor producción, y por tanto, supone un aumento de beneficios para el fabricante. Aunque, lo que para algunos supone un amplio margen de rentabilidad, existen otros componentes de la ecuación que no salen tan bien parados, como pueden ser los países del tercer mundo que están siendo poblados de basura electrónica, y en general el medio ambiente y los recursos de los que hoy disponemos, que no son ilimitados, y que están viéndose gravemente afectados por la inserción de esta práctica. Como cierre de este análisis, se repasarán algunas de las técnicas empleadas en algunos de los productos más utilizados hoy en día y las conclusiones a las que se han llevado después de analizar todos estos puntos del tema. ABSTRACT. The main goal followed in this final project has been analyzing the overall evolution of technology, both electronics and telecommunications. Also, computer science; from beginning to present it has been realized some studies about these advances have improved our daily life, even changing our routine, and turn us massive consumers of all technological products on the market. This dynamic economic and commercial has led companies to programming the end of its useful life in order to increase demand, and consequently, the production. This is known as Obsolescence. To make this document has been made a brief review through historical events that promoted the opening of this practice, and also led us to make mention all these technological devices have undergone further evolution and therefore more likely to establish them, because these changes affect consumers. Another important aspect around planned obsolescence is how to influence in society’s behavior, creating consumerist attitudes, which are precisely those feed the economic cycle continues to be based on including this practice from product design, because increased consumption and production. Therefore, this fact increases profits for the manufacturer. Although, for some people suppose a wide margin of profitability, there are other components do not have such luck; for example, third World countries have been filled with e-waste and the environment, in general, and resources available today which are not unlimited, and who are seriously affected by the inclusion of this practice. To close this analysis, we will review a few techniques used in some products most widely used today, and the conclusions that have been made after analyzing all these points of the topic.

Sistema domótico controlado por mensajería instantánea Whatsapp para personas con discapacidad

El presente PFC tiene como objetivo el desarrollo de un gestor domótico basado en el dictado de voz de la red social WhatsApp. Dicho gestor no solo sustituirá el concepto dañino de que la integración de la domótica hoy en día es cara e inservible sino que acercará a aquellas personas con una discapacidad a tener una mejora en la calidad de vida. Estas personas, con un simple comando de voz a su aplicación WhatsApp de su terminal móvil, podrán activar o desactivar todos los elementos domóticos que su vivienda tenga instalados, “activar lámpara”, “encender Horno”, “abrir Puerta”… Todo a un muy bajo precio y utilizando tecnologías OpenSource El objetivo principal de este PFC es ayudar a la gente con una discapacidad a tener mejor calidad de vida, haciéndose independiente en las labores del hogar, ya que será el hogar quien haga las labores. La accesibilidad de este servicio, es por tanto, la mayor de las metas. Para conseguir accesibilidad para todas las personas, se necesita un servicio barato y de fácil aprendizaje. Se elige la red social WhatsApp como interprete, ya que no necesita de formación al ser una aplicación usada mayoritariamente en España y por la capacidad del dictado de voz, y se eligen las tecnologías OpenSource por ser la gran mayoría de ellas gratuitas o de pago solo el hardware. La utilización de la Red social WhatsApp se justifica por sí sola, en septiembre de 2015 se registraron 900 millones de usuarios. Este dato es fruto, también, de la reciente adquisición por parte de Facebook y hace que cumpla el primer requisito de accesibilidad para el servicio domotico que se presenta. Desde hace casi 5 años existe una API liberada de WhatsApp, que la comunidad OpenSource ha utilizado, para crear sus propios clientes o aplicaciones de envío de mensajes, usando la infraestructura de la red social. La empresa no lo aprueba abiertamente, pero la liberación de la API fue legal y su uso también lo es. Por otra parte la empresa se reserva el derecho de bloquear cuentas por el uso fraudulento de su infraestructura. Las tecnologías OpenSource utilizadas han sido, distribuciones Linux (Raspbian) y lenguajes de programación PHP, Python y BASHSCRIPT, todo cubierto por la comunidad, ofreciendo soporte y escalabilidad. Es por ello que se utiliza, como matriz y gestor domotico central, una RaspberryPI. Los servicios que el gestor ofrece en su primera versión incluyen el control domotico de la iluminación eléctrica general o personal, el control de todo tipo de electrodomésticos, el control de accesos para la puerta principal de entrada y el control de medios audiovisuales. ABSTRACT. This final thesis aims to develop a domotic manager based on the speech recognition capacity implemented in the social network, WhatsApp. This Manager not only banish the wrong idea about how expensive and useless is a domotic installation, this manager will give an opportunity to handicapped people to improve their quality of life. These people, with a simple voice command to their own WhatsApp, could enable or disable all the domotics devices installed in their living places. “On Lamp”, “ON Oven”, “Open Door”… This service reduce considerably the budgets because the use of OpenSource Technologies. The main achievement of this thesis is help handicapped people improving their quality of life, making independent from the housework. The house will do the work. The accessibility is, by the way, the goal to achieve. To get accessibility to a width range, we need a cheap, easy to learn and easy to use service. The social Network WhatsApp is one part of the answer, this app does not need explanation because is used all over the world, moreover, integrates the speech recognition capacity. The OpenSource technologies is the other part of the answer due to the low costs or, even, the free costs of their implementations. The use of the social network WhatsApp is explained by itself. In September 2015 were registered around 900 million users, of course, the recent acquisition by Facebook has helped in this astronomic number and match the first law of this service about the accessibility. Since five years exists, in the internet, a free WhatsApp API. The OpenSource community has used this API to develop their own messaging apps or desktop-clients, using the WhatsApp infrastructure. The company does not approve officially, however le API freedom is legal and the use of the API is legal too. On the other hand, the company can block accounts who makes a fraudulent use of his infrastructure. OpenSource technologies used in this thesis are: Linux distributions (Raspbian) and programming languages PHP, Python and BASHCSRIPT, all of these technologies are covered by the community offering support and scalability. Due to that, it is used a RaspberryPI as the Central Domotic Manager. The domotic services that currently this manager achieve are: Domotic lighting control, electronic devices control, access control to the main door and Media Control.

A friendly online C compiler to improve programming skills based on student self-assessment

This paper presents an online C compiler designed so that students can program their practical assignments in Programming courses. What is really innovative is the self-assessment of the exercises based on black-box tests and train students’ skill to test software. Moreover, this tool lets instructors, not only proposing and classifying practical exercises, but also evaluating automatically the efforts dedicated and the results obtained by the students. The system has been applied to the 1st-year students at the Industrial Engineering specialization at the Universidad Politecnica de Madrid. Results show that the students obtained better academic performance, reducing the failure rate in the practical exam considerably with respect to previous years, in addition that an anonymous survey proved that students are satisfied with the system because they get instant feedback about their programs.

FLUXO INTERNACIONAL DE FICÇÃO: A TELENOVELA BRASILEIRA NA BOLÍVIA

O fluxo internacional da telenovela brasileira na América Latina sempre enfrentou a concorrência daqueles tradicionais países produtores, México e Venezuela. Entretanto, na Bolívia, país de tradição cultural hispânica e indígena, as telenovelas da Rede Globo alcançam altos índices de audiência. O objetivo principal desta pesquisa foi descobrir como essa telenovela é vista pelos telespectadores bolivianos e o motivo dessa preferência. A partir da teoria dos Usos e Gratificações, de Elihu Katz, realizou-se uma pesquisa qualitativa em Santa Cruz de la Sierra, com a aplicação de questionários e a realização de entrevistas, buscando compreender a recepção da telenovela nessa cidade. Foram analisadas, também, as grades de programação das principais emissoras deste país e seus índices de audiência. As principais conclusões foram: o sucesso das telenovelas brasileiras na Bolívia deve-se às temáticas abordadas, ao reconhecimento da qualidade de sua produção e das imagens veiculadas, assim como às estratégias de venda da emissora brasileira. Os telespectadores desse país utilizam o conteúdo das telenovelas como instrumento de informação e de aprendizagem e o gênero satisfaz a necessidade de evasão da realidade e as necessidades afetivas.(AU)

FLUXO INTERNACIONAL DE FICÇÃO: A TELENOVELA BRASILEIRA NA BOLÍVIA

O fluxo internacional da telenovela brasileira na América Latina sempre enfrentou a concorrência daqueles tradicionais países produtores, México e Venezuela. Entretanto, na Bolívia, país de tradição cultural hispânica e indígena, as telenovelas da Rede Globo alcançam altos índices de audiência. O objetivo principal desta pesquisa foi descobrir como essa telenovela é vista pelos telespectadores bolivianos e o motivo dessa preferência. A partir da teoria dos Usos e Gratificações, de Elihu Katz, realizou-se uma pesquisa qualitativa em Santa Cruz de la Sierra, com a aplicação de questionários e a realização de entrevistas, buscando compreender a recepção da telenovela nessa cidade. Foram analisadas, também, as grades de programação das principais emissoras deste país e seus índices de audiência. As principais conclusões foram: o sucesso das telenovelas brasileiras na Bolívia deve-se às temáticas abordadas, ao reconhecimento da qualidade de sua produção e das imagens veiculadas, assim como às estratégias de venda da emissora brasileira. Os telespectadores desse país utilizam o conteúdo das telenovelas como instrumento de informação e de aprendizagem e o gênero satisfaz a necessidade de evasão da realidade e as necessidades afetivas.(AU)

TV REGIONAL NO VALE DO PARAÍBA - SP: expansão, aspectos da audiência e modos de inserção local

Investigação sobre a regionalização das redes de comunicação, em especial a televisão, fenômeno que representa uma realidade de segmentação da comunicação massiva. Objetiva-se analisar e classificar as emissoras regionais de televisão com relação aos seus modos de inserção local, observando-se suas especificidades, programação, estratégias de comunicação e ações de conquista de identidade com a comunidade onde estão inseridas, além de tentar compreender como se deu a expansão da televisão nessa região, desde a implantação da primeira emissora, em 1988, na cidade de São José dos Campos SP. Tomando-se como recorte de estudo, as emissoras de televisão regional de sinal aberto no Vale do Paraíba, estado de São Paulo, foram realizadas entrevistas semi-abertas com profissionais das áreas comercial e de programação das mesmas e aplicados questionários junto a uma amostra da população do Vale do Paraíba que representa os telespectadores potenciais da área de cobertura dessas emissoras, a fim de se identificar a percepção que o público receptor tem a respeito da presença e atuação das televisões locais. Conclui-se que os diferentes modos de inserção local das emissoras influem diretamente na relação de identidade das mesmas com os telespectadores da região.(AU)

TV REGIONAL NO VALE DO PARAÍBA - SP: expansão, aspectos da audiência e modos de inserção local

Investigação sobre a regionalização das redes de comunicação, em especial a televisão, fenômeno que representa uma realidade de segmentação da comunicação massiva. Objetiva-se analisar e classificar as emissoras regionais de televisão com relação aos seus modos de inserção local, observando-se suas especificidades, programação, estratégias de comunicação e ações de conquista de identidade com a comunidade onde estão inseridas, além de tentar compreender como se deu a expansão da televisão nessa região, desde a implantação da primeira emissora, em 1988, na cidade de São José dos Campos SP. Tomando-se como recorte de estudo, as emissoras de televisão regional de sinal aberto no Vale do Paraíba, estado de São Paulo, foram realizadas entrevistas semi-abertas com profissionais das áreas comercial e de programação das mesmas e aplicados questionários junto a uma amostra da população do Vale do Paraíba que representa os telespectadores potenciais da área de cobertura dessas emissoras, a fim de se identificar a percepção que o público receptor tem a respeito da presença e atuação das televisões locais. Conclui-se que os diferentes modos de inserção local das emissoras influem diretamente na relação de identidade das mesmas com os telespectadores da região.(AU)

The impact of cognitive control on children's goal monitoring in a time-based prospective memory task

Peer reviewed

5-HT2A and 5-HT2C receptors as hypothalamic targets of developmental programming in male rats

Funding The research reported in this publication was supported by the Biotechnology and Biological Sciences Research Council (E007821/1 to M.S.M-G, R.L.C and E00797X/1; BB/K001418 /1 to L.K.H), the British Heart Foundation (FS/09/029/27902 to S.E.O.), the UK Medical Research Council Metabolic Diseases Unit (MC_UU_12012/4 to S.E.O and MC_UU_12012/1 to G.S.H.Y), the Wellcome Trust (WT081713 and WT098012 to L.K.H), the European Union (FP7-HEALTH-266408 Full4Health to G.S.H.Y) and the Helmholtz Alliance ICEMED to G.S.H.Y.