The Timing of Motherhood While Earning a PhD in Engineering

In spite of tremendous efforts, women are still under-represented in the field of science. Post-graduate education and early tenure track employment are part of the academic career establish-ment in research and development during periods that usually overlap with family formation. Though women tend to leave science mainly after obtaining their PhD, and the timing of mother-hood plays a vital role in a successful research career, qualitative data on this life period are scarce. Our paper focuses on how the normative and institutional contexts shape female PhD engineering students’ family plans. The research was based on intersections of life course and risk and uncertainty theories. Using qualitative interviews we explored how contradicting social norms of childbearing cause tensions in postgraduate students’ lives, and how the different uncer-tainties and risks permeate young researchers’ decisions on early life events. We concluded that, despite the general pattern of delaying motherhood among higher educated women, these students struggle against this postponement, and they hardly have any good options to avoid risk stem-ming from uncertainties and from some characteris-tics of studying and working in engineering. Find-ings of this research may call the attention of stake-holders to possible intervention points.

Neural Network Evidence for the Coupling of Presaccadic Visual Remapping to Predictive Eye Position Updating.

As we look around a scene, we perceive it as continuous and stable even though each saccadic eye movement changes the visual input to the retinas. How the brain achieves this perceptual stabilization is unknown, but a major hypothesis is that it relies on presaccadic remapping, a process in which neurons shift their visual sensitivity to a new location in the scene just before each saccade. This hypothesis is difficult to test in vivo because complete, selective inactivation of remapping is currently intractable. We tested it in silico with a hierarchical, sheet-based neural network model of the visual and oculomotor system. The model generated saccadic commands to move a video camera abruptly. Visual input from the camera and internal copies of the saccadic movement commands, or corollary discharge, converged at a map-level simulation of the frontal eye field (FEF), a primate brain area known to receive such inputs. FEF output was combined with eye position signals to yield a suitable coordinate frame for guiding arm movements of a robot. Our operational definition of perceptual stability was "useful stability," quantified as continuously accurate pointing to a visual object despite camera saccades. During training, the emergence of useful stability was correlated tightly with the emergence of presaccadic remapping in the FEF. Remapping depended on corollary discharge but its timing was synchronized to the updating of eye position. When coupled to predictive eye position signals, remapping served to stabilize the target representation for continuously accurate pointing. Graded inactivations of pathways in the model replicated, and helped to interpret, previous in vivo experiments. The results support the hypothesis that visual stability requires presaccadic remapping, provide explanations for the function and timing of remapping, and offer testable hypotheses for in vivo studies. We conclude that remapping allows for seamless coordinate frame transformations and quick actions despite visual afferent lags. With visual remapping in place for behavior, it may be exploited for perceptual continuity.

Contributions of Dorsal/Ventral Hippocampus and Dorsolateral/Dorsomedial Striatum to Interval Timing

Humans and animals have remarkable capabilities in keeping time and using time as a guide to orient their learning and decision making. Psychophysical models of timing and time perception have been proposed for decades and have received behavioral, anatomical and pharmacological data support. However, despite numerous studies that aimed at delineating the neural underpinnings of interval timing, a complete picture of the neurobiological network of timing in the seconds-to-minutes range remains elusive. Based on classical interval timing protocols and proposing a Timing, Immersive Memory and Emotional Regulation (TIMER) test battery, the author investigates the contributions of the dorsal and ventral hippocampus as well as the dorsolateral and the dorsomedial striatum to interval timing by comparing timing performances in mice after they received cytotoxic lesions in the corresponding brain regions. On the other hand, a timing-based theoretical framework for the emergence of conscious experience that is closely related to the function of the claustrum is proposed so as to serve both biological guidance and the research and evolution of “strong” artificial intelligence. Finally, a new “Double Saturation Model of Interval Timing” that integrates the direct- and indirect- pathways of striatum is proposed to explain the set of empirical findings.

Seismic Performance of Hybrid Fiber Reinforced Polymer-Concrete Pier Frame Systems

As an alternative to transverse spiral or hoop steel reinforcement, fiber reinforced polymers (FRPs) were introduced to the construction industry in the 1980's. The concept of concrete-filled FRP tube (CFFT) has raised great interest amongst researchers in the last decade. FRP tube can act as a pour form, protective jacket, and shear and flexural reinforcement for concrete. However, seismic performance of CFFT bridge substructure has not yet been fully investigated. Experimental work in this study included four two-column bent tests, several component tests and coupon tests. Four 1/6-scale bridge pier frames, consisting of a control reinforced concrete frame (RCF), glass FRP-concrete frame (GFF), carbon FRP-concrete frame (CFF), and hybrid glass/carbon FRP-concrete frame (HFF) were tested under reverse cyclic lateral loading with constant axial loads. Specimen GFF did not show any sign of cracking at a drift ratio as high as 15% with considerable loading capacity, whereas Specimen CFF showed that lowest ductility with similar load capacity as in Specimen GFF. FRP-concrete columns and pier cap beams were then cut from the pier frame specimens, and were tested again in three point flexure under monotonic loading with no axial load. The tests indicated that bonding between FRP and concrete and yielding of steel both affect the flexural strength and ductility of the components. The coupon tests were carried out to establish the tensile strength and elastic modulus of each FRP tube and the FRP mold for the pier cap beam in the two principle directions of loading. A nonlinear analytical model was developed to predict the load-deflection responses of the pier frames. The model was validated against test results. Subsequently, a parametric study was conducted with variables such as frame height to span ratio, steel reinforcement ratio, FRP tube thickness, axial force, and compressive strength of concrete. A typical bridge was also simulated under three different ground acceleration records and damping ratios. Based on the analytical damage index, the RCF bridge was most severely damaged, whereas the GFF bridge only suffered minor repairable damages. Damping ratio was shown to have a pronounced effect on FRP-concrete bridges, just the same as in conventional bridges. This research was part of a multi-university project, which is founded by the National Science Foundation (NSF) Network for Earthquake Engineering Simulation Research (NEESR) program.

MIMU sensors for joint kinematic estimation: anatomical landmarking and frame correction

The ability to capture human motion allows researchers to evaluate an individual’s gait. Gait can be measured in different ways, from camera-based systems to Magnetic and Inertial Measurement Units (MIMU). The former uses cameras to track positional information of photo-reflective markers, while the latter uses accelerometers, gyroscopes, and magnetometers to measure segment orientation. Both systems can be used to measure joint kinematics, but the results vary because of their differences in anatomical calibrations. The objective of this thesis was to study potential solutions for reducing joint angle discrepancies between MIMU and camera-based systems. The first study worked to correct the anatomical frame differences between MIMU and camera-based systems via the joint angles of both systems. This study looked at full lower body correction versus correcting a single joint. Single joint correction showed slightly better alignment of both systems, but does not take into account that body segments are generally affected by more than one joint. The second study explores the possibility of anatomical landmarking using a single camera and a pointer apparatus. Results showed anatomical landmark position could be determined using a single camera, as the anatomical landmarks found from this study and a camera-based system showed similar results. This thesis worked on providing a novel way for obtaining anatomical landmarks with a single point-and-shoot camera, as well aligning anatomical frames between MIMUs and camera-based systems using joint angles.

Assessment of the cortisol awakening response: Real-time analysis and curvilinear effects of sample timing inaccuracy

The cortisol awakening response (CAR) is typically measured in the domestic setting. Moderate sample timing inaccuracy has been shown to result in erroneous CAR estimates and such inaccuracy has been shown partially to explain inconsistency in the CAR literature. The need for more reliable measurement of the CAR has recently been highlighted in expert consensus guidelines where it was pointed out that less than 6% of published studies provided electronic-monitoring of saliva sampling time in the post-awakening period. Analyses of a merged data-set of published studies from our laboratory are presented. To qualify for selection, both time of awakening and collection of the first sample must have been verified by electronic-monitoring and sampling commenced within 15 min of awakening. Participants (n = 128) were young (median age of 20 years) and healthy. Cortisol values were determined in the 45 min post-awakening period on 215 sampling days. On 127 days, delay between verified awakening and collection of the first sample was less than 3 min (‘no delay’ group); on 45 days there was a delay of 4–6 min (‘short delay’ group); on 43 days the delay was 7–15 min (‘moderate delay’ group). Cortisol values for verified sampling times accurately mapped on to the typical post-awakening cortisol growth curve, regardless of whether sampling deviated from desired protocol timings. This provides support for incorporating rather than excluding delayed data (up to 15 min) in CAR analyses. For this population the fitted cortisol growth curve equation predicted a mean cortisol awakening level of 6 nmols/l (±1 for 95% CI) and a mean CAR rise of 6 nmols/l (±2 for 95% CI). We also modelled the relationship between real delay and CAR magnitude, when the CAR is calculated erroneously by incorrectly assuming adherence to protocol time. Findings supported a curvilinear hypothesis in relation to effects of sample delay on the CAR. Short delays of 4–6 min between awakening and commencement of saliva sampling resulted an overestimated CAR. Moderate delays of 7–15 min were associated with an underestimated CAR. Findings emphasize the need to employ electronic-monitoring of sampling accuracy when measuring the CAR in the domestic setting.

Relocating the Frame: Object-Oriented (1.) and Locative Art (2.) Environments

The locative project is in a condition of emergence, an embryonic state in which everything is still up for grabs, a zone of consistency yet to emerge. As an emergent practice locative art, like locative media generally, it is simultaneously opening up new ways of engaging in the world and mapping its own domain. (Drew Hemment, 2004) Artists and scientists have always used whatever emerging technologies existed at their particular time throughout history to push the boundaries of their fields of practice. The use of new technologies or the notion of ‘new’ media is neither particularly new nor novel. Humans are adaptive, evolving and will continue to invent and explore technological innovation. This paper asks the following questions: what role does adaptive and/or intelligent art play in the future of public spaces, and how does this intervention alter the relationship between theory and practice? Does locative or installation-based art reach more people, and does ‘intelligent’ or ‘smart’ art have a larger role to play in the beginning of this century? The speakers will discuss their current collaborative prototype and within the presentation demonstrate how software art has the potential to activate public spaces, and therefore contribute to a change in spatial or locative awareness. It is argued that the role and perhaps even the representation of the audience/viewer is left altered through this intervention. 1. A form of electronic imagery created by a collection of mathematically defined lines and/or curves. 2. An experiential form of art which engages the viewer both from within a specific location and in response to their intentional or unintentional input.

Building support for carbon emissions mitigation: can we use an ocean acidification frame to promote support?

Thesis (Master's)--University of Washington, 2016-06

Spike-timing dependent plasticity and connectivity in primate sensorimotor cortex

Thesis (Ph.D.)--University of Washington, 2016-06

Investigating Social Mobility: Cultural Frames and Cultural Frame Switching in First-Generation College Students

Thesis (Ph.D.)--University of Washington, 2016-08

Timing ótimo para investir na proteção costeira na zona centro de Portugal

A presente dissertação insere-se no âmbito da gestão das zonas costeiras, que na atualidade enfrentam um grave problema de erosão. Este torna-se um problema social com especial importância devido à concentração populacional e atividade económica que se verifica nas regiões litorais. Neste contexto muitos têm sido os estudos físicos e económicos levados a cabo no sentido de encontrar soluções para lidar com este problema. O principal objetivo desta dissertação foi avaliar qual a importância que o timing em que é efetuado o investimento na proteção pode ter na defesa das zonas costeiras. Por outras palavras, perceber se existem ou não vantagens em adiar o investimento na proteção por um determinado período de tempo. Foi definida como área de estudo o trecho costeiro de 20 km compreendido entre a Praia da Barra (Aveiro) e a Praia de Mira (Coimbra). Através da utilização do modelo numérico Long-Term Configuration (LTC) foi simulada a evolução da linha de costa por um período de 80 anos, seguida de uma análise custo-benefício ambiental em que foi considerada a possibilidade de investimentos em estruturas de defesa (no caso desta dissertação esporões com 100m, 200m e 300m de comprimento) a serem efetuados após 0, 10, 20 ou 30 anos. Foram também contempladas restrições orçamentais, e ainda, efetuada uma análise de sensibilidade à taxa de desconto utilizada. Os resultados mostram que quanto mais cedo se iniciar proteção das zonas costeiras, mais benefícios económicos serão retirados desse investimento. Os cenários que se apresentaram como os mais vantajosos são aqueles em que o investimento é levado a cabo no Ano 0 e onde se opta por uma proteção integral ou quase integral da linha de costa. Ainda assim, em todos os timings de investimento analisados foi possível encontrar cenários economicamente viáveis e dos quais resultariam benefícios económicos. A análise com inclusão de restrições orçamentais mostra que a utilização destas deixa de fazer sentido à medida que o investimento é adiado, funcionando então o próprio retardar do investimento como uma medida de contenção orçamental. A análise de sensibilidade à taxa de desconto revelou que a opção por uma taxa de desconto de 4% acaba por não influenciar de maneira significativa os resultados obtidos.

Report of the frame survey of Lake Albert carried out in January 2007

A comprehensive Frame survey was carried out by the National Fisheries Resources Research Institute (NAFIRRI) in Lake Albert in January 2007. The frame survey captured the main characteristics of the fisheries and facilities supporting the fisheries and provides baseline information for reference of other studies as well as management interventions.

Frame survey (census of boats and fishing gear) Lake Kyoga and Lake Kwania (Uganda), May-June 1990

The census of a fishing industry is called a frame survey. This is a rather comprehensive term, because there are many aspects of a fishery which one might wish to know. This is illustrated by the report on the partial census executed by the ADP/FS on the southern landings of L.Kyoga during December 1988, which deals with many socio-economic aspects of fishermen's households.