Development of a bovine collagen-apatitic calcium phosphate cement for potential fracture treatment through vertebroplasty

The aim of this study was to examine the potential of incorporating bovine fibres as a means of reinforcing a typically brittle apatite calcium phosphate cement for vertebroplasty. Type I collagen derived from bovine Achilles tendon was ground cryogenically to produce an average fibre length of 0.96 ± 0.55 mm and manually mixed into the powder phase of an apatite-based cement at 1, 3 or 5 wt.%. Fibre addition of up to 5 wt.% had a significant effect (P = 0.001) on the fracture toughness, which was increased by 172%. Adding =1 wt.% bovine collagen fibres did not compromise the compressive properties significantly, however, a decrease of 39-53% was demonstrated at =3 wt.% fibre loading. Adding bovine collagen to the calcium phosphate cement reduced the initial and final setting times to satisfy the clinical requirements stated for vertebroplasty. The cement viscosity increased in a linear manner (R = 0.975) with increased loading of collagen fibres, such that the injectability was found to be reduced by 83% at 5 wt.% collagen loading. This study suggests for the first time the potential application of a collagen-reinforced calcium phosphate cement as a viable option in the treatment of vertebral fractures, however, issues surrounding efficacious cement delivery need to be addressed. © 2012 Acta Materialia Inc.

Genetic screening protocol for familial hypercholesterolemia which includes splicing defects gives an improved mutation detection rate

Familial hypercholesterolemia (FH) is a common single gene disorder, which predisposes to coronary artery disease. In a previous study, we have shown that in patients with definite FH around 20% had no identifiable gene defect after screening the entire exon coding area of the low density lipoprotein receptor (LDLR) and testing for the common Apolipoprotein B (ApoB) R3500Q mutation. In this study, we have extended the screen to additional families and have included the non-coding intron splice regions of the gene. In families with definite FH (tendon xanthoma present, n = 68) the improved genetic screening protocol increased the detection rate of mutations to 87%. This high detection rate greatly enhances the potential value of this test as part of a clinical screening program for FH. In contrast, the use of a limited screen in patients with possible FH (n = 130) resulted in a detection rate of 26%, but this is still of significant benefit in diagnosis of this genetic condition. We have also shown that 14% of LDLR defects are due to splice site mutations and that the most frequent splice mutation in our series (c.1845 + 11 c > g) is expressed at the RNA level. In addition, DNA samples from the patients in whom no LDLR or ApoB gene mutations were found, were sequenced for the NARC-1 gene. No mutations were identified which suggests that the role of NARC-1 in causing FH is minor. In a small proportion of families (

Mutation screening and genotype:phenotype correlation in familial hypercholesterolaemia

The aim of this study was to develop a mutation screening protocol for familial hypercholesterolaemia (FH) patients and to assess genotype/phenotype effects in terms of pre-treatment lipid profiles and presentation of tendon xanthomata (TX). A total of 158 families with clinical definitions of possible (120) or definite (38) FH were studied using a tiered screening protocol. Mutations were identified in 52 families, 44 families showing 23 different LDLR gene defects and eight families showing the common Apo B100 gene defect R3500Q. LDLR defects were detected in various regions of the gene with 56% in the LDL binding domain (exons 2-6) and 37% in the EGF precursor homology domain (exons 7-14). The most common mutations were D461N(7), C210X(5), 932delA(5), and C163Y(4). Frameshift mutations accounted for 20% with nonsense 13%, mis-sense 35%, splice 3%, Apo B 13% and 2% large deletion, 13% of clinically definite FH remained undefined. In conclusion, DNA based diagnosis is possible in 79% (30/38) of clinically definite FH families and of the 120 possible FH families at the start of the screening program, 18% (22/120) now have defined mutations. Overall 60 families from the original 158 meet the clinical and/or genetic criteria for definite FH. Tendon xanthomata were present in only 58% (30/52) of genetically defined FH families, thus limiting its use as a strict diagnostic criteria. Families with low density lipoprotein receptor (LDLR) defects present with higher total and LDL cholesterol levels and a higher incidence of TX than do those with the common Apo B variant, and frameshift mutations appear to have the most severe presentation. Copyright (C) 1999 Elsevier Science Ireland Ltd.

Glycation, glycoxidation, and cross-linking of collagen by glucose. Kinetics, mechanisms, and inhibition of late stages of the Maillard reaction

The Maillard or browning reaction between sugar and protein contributes to the increased chemical modification and cross-linking of long-lived tissue proteins in diabetes. To evaluate the role of glycation and oxidation in these reactions, we have studied the effects of oxidative and antioxidative conditions and various types of inhibitors on the reaction of glucose with rat tail tendon collagen in phosphate buffer at physiological pH and temperature. The chemical modifications of collagen that were measured included fructoselysine, the glycoxidation products N epsilon-(carboxymethyl)lysine and pentosidine and fluorescence. Collagen cross-linking was evaluated by analysis of cyanogen bromide peptides using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by changes in collagen solubilization on treatment with pepsin or sodium dodecylsulfate. Although glycation was unaffected, formation of glycoxidation products and cross-linking of collagen were inhibited by antioxidative conditions. The kinetics of formation of glycoxidation products proceeded with a short lag phase and were independent of the amount of Amadori adduct on the protein, suggesting that autoxidative degradation of glucose was a major contributor to glycoxidation and cross-linking reactions. Chelators, sulfhydryl compounds, antioxidants, and aminoguanidine also inhibited formation of glycoxidation products, generation of fluorescence, and cross-linking of collagen without significant effect on the extent of glycation of the protein. We conclude that autoxidation of glucose or Amadori compounds on protein plays a major role in the formation of glycoxidation products and cross-liking of collagen by glucose in vitro and that chelators, sulfhydryl compounds, antioxidants, and aminoguanidine act as uncouplers of glycation from subsequent glycoxidation and cross-linking reactions.

Post-tensioning of glulam timber with steel tendons

This paper describes a series of four-point bending tests that were conducted, under service loads and to failure, on unreinforced, reinforced and post-tensioned glulam timber beams, where the reinforcing tendon used was 12 mm diameter toughened steel bar. The research was designed to evaluate the benefits offered by including an active reinforcement in contrast to the passive reinforcement typically used within timber strengthening works, in addition to establishing the effect that bonding the reinforcing tendon has on the materials performance.

The laboratory investigations established that the flexural strength and stiffness increased for both the reinforced and post-tensioned timbers compared to the unreinforced beams. The flexural strength of the reinforced timber increased by 29.4%, while the stiffness increased by 28.1%. Timber that was post-tensioned with an unbonded steel tendon showed a flexural strength increase of 17.6% and an increase in stiffness of 8.1%. Post-tensioned beams with a bonded steel tendon showed increases in flexural strength and stiffness of 40.1% and 30% respectively.

Post-tensioning glulam timber beams with basalt FRP tendons

Improvements in the structural performance of glulam timber beams by the inclusion of reinforcing materials can increase both the service performance and ultimate capacity. This paper describes a series of four-point bending tests conducted, under service loads and to failure, on unreinforced, reinforced and post-tensioned glulam timber beams, where the reinforcing tendon used is 12 mm dia. basalt fibre-reinforced polymer. The research is designed to evaluate the benefits offered by including an active reinforcement in contrast to the passive reinforcement typically used within timber strengthening works, in addition to establishing the effect that bonding the reinforcing tendon has on the material's performance. Further experimental tests have also been developed to investigate the long-term implications of this research, with emphasis placed upon creep and loss of post-tensioning; however, this is ongoing and is not presented in this paper. The laboratory investigations establish that the flexural strength and stiffness increase for both the unbonded and bonded post-tensioned timbers compared to the unreinforced and reinforced beams. Timber that is post-tensioned with an unbonded basalt fibre-reinforced polymer tendon shows a flexural strength increase of 2ṡ8% and an increase in stiffness of 8ṡ7%. Post-tensioned beams with a bonded basalt fibre-reinforced polymer tendon show increases in flexural strength and stiffness of 15ṡ4% and 11ṡ5% respectively.

POST-TENSIONING OF TIMBER BEAMS WITH BASALT FIBRE REINFORCED POLYMER

Improvements in the structural performance of glulam timber beams by the inclusion of reinforcing materials can improve both the service performance and ultimate capacity. In recent years research focusing on the addition of fibre reinforced polymers to strengthen members has yielded positive results. However, the FRP material is still a relatively expensive material and its full potential has not been realised in combination with structural timber. This paper describes a series of four-point bending tests that were conducted, under service and ultimate loads, on post-tensioned glulam timber beams where the reinforcing tendon used was 12 mm diameter Basalt Fibre Reinforced Polymer (BFRP). The research was designed to evaluate the additional benefits of including an active type of reinforcement, by post-tensioning the BFRP tendon, as opposed to the passive approach of simply reinforcing the timber beam.
From the laboratory investigations, it was established that there was a 16% increase in load carrying capacity, in addition to a 14% reduction in deflection under service loads when members containing the post-tensioned BFRP composite are compared with control timber specimens. Additionally a more favourable ductile failure mode was witnessed compared to the brittle failure of an unreinforced timber beam. The results support the assumption that by initially stressing the embedded FRP tendon the structural benefits experienced by the timber member increase in a number of ways, indicating that there is significant scope for this approach in practical applications.

Development of Novel Post-Tensioned Glulam Timber Composites

Improvements in the structural performance of glulam timber beams by the inclusion of reinforcing materials can increase both the service performance and ultimate capacity. In recent years research focusing on the addition of fibre reinforced polymers (FRP) to strengthen members has yielded positive results. However, the FRP material is still relatively expensive and its full potential in combination with structural timber has not been realised. This paper describes a series of four-point bending tests that were conducted, under service loads and to failure, on unreinforced, reinforced and post-tensioned glulam timber beams, where the reinforcing tendon used was 12mm diameter basalt fibre reinforced polymer (BFRP). The research was designed to evaluate the benefits offered by including an active reinforcement in contrast to the passive reinforcement typically used within timber strengthening works, in addition to establishing the affect that bonding the reinforcing tendon has on the material’s performance. Further experimental tests have been developed to investigate the long-term implications of this research, with emphasis placed upon creep and loss of post-tensioning.
The laboratory investigations established that the flexural strength and stiffness increased for both the unbonded and bonded post-tensioned timbers compared to the unreinforced beams. Timber that was post-tensioned with an unbonded BFRP tendon showed a flexural strength increase of 2.8% and an increase in stiffness of 8.7%. Post-tensioned beams with a bonded BFRP tendon showed increases in flexural strength and stiffness of 16.6% and 11.5% respectively.

Paired associative transcranial alternating current stimulation increases the excitability of corticospinal projections in humans

Many types of non-invasive brain stimulation alter corticospinal excitability (CSE). Paired associative stimulation (PAS) has attracted particular attention as its effects ostensibly adhere to Hebbian principles of neural plasticity. In prototypical form, a single electrical stimulus is directed to a peripheral nerve in close temporal contiguity with transcranial magnetic stimulation delivered to the contralateral primary motor cortex (M1). Repeated pairing of the two discrete stimulus events (i.e. association) over an extended period either increases or decreases the excitability of corticospinal projections from M1, contingent on the interstimulus interval. We studied a novel form of associative stimulation, consisting of brief trains of peripheral afferent stimulation paired with short bursts of high frequency (≥80 Hz) transcranial alternating current stimulation (tACS) over contralateral M1. Elevations in the excitability of corticospinal projections to the forearm were observed for a range of tACS frequency (80, 140 and 250 Hz), current (1, 2 and 3 mA) and duration (500 and 1000 ms) parameters. The effects were at least as reliable as those brought about by PAS or transcranial direct current stimulation. When paired with tACS, muscle tendon vibration also induced elevations of CSE. No such changes were brought about by the tACS or peripheral afferent stimulation alone. In demonstrating that associative effects are expressed when the timing of the peripheral and cortical events is not precisely circumscribed, these findings suggest that multiple cellular pathways may contribute to a long term potentiation-type response. Their relative contributions will differ depending on the nature of the induction protocol that is used.

Plan de mejoramiento de los proesos de transformación y comercialización de plantas medicinales orgánicas en la Empresa Jambi Kiwa.

La Asociación de Productores de Plantas Medicinales de Chimborazo se crea en abril de 2001, mediante Acuerdo Ministerial N-202-MSB-CH, reconocida legalmente por el Ministerio de Bienestar Social de la provincia de Chimborazo. Una vez que los miembros de la Asociación de Productores de Plantas Medicinales de Chimborazo empezaron a producir y transformar las plantas medicinales de manera más planificada y a tener mayor demanda, se comenzó con la búsqueda de un espacio físico que pueda adaptarse para la realización de este proceso y gracias a la cooperación de organizaciones externas y la mano de obra con la que aportaron los socios, se empieza con la construcción de la fábrica. En el año 2003, Jambi Kiwa se registra como marca y nombre en el Instituto Ecuatoriano de Propiedad Intelectual (IEPI) con el propósito de precautelar los derechos sobre sus productos. Jambi Kiwa es la fábrica y marca de los productos de la Asociación de Productores de Plantas Medicinales de Chimborazo, que se encarga de procesar las plantas medicinales orgánicas y comercializar los productos finales.

Creación de la Microempresa Procesadora de Flores inmortalizadas en la Parroquia el Quinche y su comercialización en la zona norte de Quito

El Ecuador es un país privilegiado que ocupa uno de los primeros lugares en el mundo por la calidad y la gran variedad de sus flores, la utilización de mano de obra calificada y la habilidad de manejar costos de producción más bajos que los de la competencia. La producción florícola en el Ecuador es la actividad exportable que mayor dinamismo y repunte ha alcanzado en los últimos 10 años, en virtud de los factores favorables ya mencionados que han permitido su desarrollo en un medio competitivo. Los empresarios deben reforzar sus factores para de esta forma enfrentar con éxito el creciente comercio internacional de estos productos. La situación actual, estructura e importancia de este sector dentro de la economía nacional, los mercados de destino y los potenciales para la comercialización contribuyen al mantenimiento y consolidación de la ventaja competitiva en la producción de flores.

Contribución al estudio del patrimonio de Cacela: cartografía, arquitectura y paisaje en el contexto del algarve oriental en Portugal

El presente artículo estudia la cartografía de Cacela en el sur de Portugal con el propósito de interpretar su transformación a través del tiempo, considerando la arquitectura, el urbanismo y el paisaje de forma integrada. La lectura de esa transformación se lleva de la mano de las principales cartas de Cacela que coinciden con el inicio del siglo XVII, la aproximación al final del Antiguo Régimen y la transición del siglo XIX al XX, asociando cada uno de estos tiempos a un modo particular de representación. La interpretación de las diferentes cartas está organizada, en términos me- todológicos, a partir del recurso a fuentes escritas de la época, culminando con la elaboración de un dibujo final que contiene la representación del espacio edificado y del paisaje de Cacela a mediados del siglo pasado. Este trabajo se inscribe en una investigación más amplia sobre las aglomeraciones urbanas de pequeña dimensión en las diver- sas subunidades geográficas del sur de Portugal, comprendiendo el paisaje, la morfología urbana y el levantamiento integral de todo el núcleo edificado.

O ensino das ciências e a promoção da literacia científica na educação básica : representações e conhecimento profissional dos professores de ciências

Tese de doutoramento, Educação (Didática das Ciências), Universidade de Lisboa, Instituto de Educação, 2015

Morte de enxertos de castanheira do Pará.

1972

Influência da crioterapia no tendão quadricipital na força máxima, na sensação de força produzida e na funcionalidade do membro inferior

Enquadramento: A aplicação de crioterapia utiliza-se como coadjuvante na reeducação neuromuscular e tem como objetivo atingir o mais rápido possível a capacidade funcional, devido aos seus efeitos analgésicos e anti- inflamatórios, contudo, o seu efeito negativo ao nível da propriocepção tem vindo a ser questionado. Objetivo: Verificar se a aplicação de crioterapia no tendão quadricipital tem influência na força máxima, na sensação de força produzida e na funcionalidade do membro inferior. Metodologia: Tratou-se de um estudo experimental, do tipo laboratorial e com um desenho cruzado. Quarenta sujeitos foram distribuídos inicialmente e de forma aleatória em um grupo experimental e um grupo controlo, sendo que, após uma semana os elementos que pertenceram ao grupo experimental passaram para grupo controlo e vice-versa. O grupo experimental foi submetido a um programa com gelo dinâmico durante 10 minutos, avaliando-se a força máxima, sensação de força produzida e funcionalidade do membro, enquanto grupo controlo esteve em repouso o mesmo período de tempo. Resultados: Verificaram-se que não houve diferenças estatisticamente significativas relativas a todas variáveis estudadas (p>0,05). Conclusão: O uso da crioterapia na região mio-tendinosa do quadrícipete não provoca défices significativos ao nível das respostas sensório-motoras do joelho, e que à luz destes resultados, esta pode ser utilizada antes da realização de outras técnicas terapêuticas, sem qualquer risco adicional a nível motor.