Characterization of DnmA, the Dnmt2 homolog in Dictyostelium discoideum

Eukaryotic DNA m5C methyltransferases (MTases) play a major role in many epigenetic regulatory processes like genomic imprinting, X-chromosome inactivation, silencing of transposons and gene expression. Members of the two DNA m5C MTase families, Dnmt1 and Dnmt3, are relatively well studied and many details of their biological functions, biochemical properties as well as interaction partners are known. In contrast, the biological functions of the highly conserved Dnmt2 family, which appear to have non-canonical dual substrate specificity, remain enigmatic despite the efforts of many researchers. The genome of the social amoeba Dictyostelium encodes Dnmt2-homolog, the DnmA, as the only DNA m5C MTase which allowed us to study Dnmt2 function in this organism without interference by the other enzymes. The dnmA gene can be easily disrupted but the knock-out clones did not show obvious phenotypes under normal lab conditions, suggesting that the function of DnmA is not vital for the organism. It appears that the dnmA gene has a low expression profile during vegetative growth and is only 5-fold upregulated during development. Fluorescence microscopy indicated that DnmA-GFP fusions were distributed between both the nucleus and cytoplasm with some enrichment in nuclei. Interestingly, the experiments showed specific dynamics of DnmA-GFP distribution during the cell cycle. The proteins colocalized with DNA in the interphase and were mainly removed from nuclei during mitosis. DnmA functions as an active DNA m5C MTase in vivo and is responsible for weak but detectable DNA methylation of several regions in the Dictyostelium genome. Nevertheless, gel retardation assays showed only slightly higher affinity of the enzyme to dsDNA compared to ssDNA and no specificity towards various sequence contexts, although weak but detectable specificity towards AT-rich sequences was observed. This could be due to intrinsic curvature of such sequences. Furthermore, DnmA did not show denaturant-resistant covalent complexes with dsDNA in vitro, although it could form covalent adducts with ssDNA. Low binding and methyltransfer activity in vitro suggest the necessity of additional factor in DnmA function. Nevertheless, no candidates could be identified in affinity purification experiments with different tagged DnmA fusions. In this respect, it should be noted that tagged DnmA fusion preparations from Dictyostelium showed somewhat higher activity in both covalent adduct formation and methylation assays than DnmA expressed in E.coli. Thus, the presence of co-purified factors cannot be excluded. The low efficiency of complex formation by the recombinant enzyme and the failure to define interacting proteins that could be required for DNA methylation in vivo, brought up the assumption that post-translational modifications could influence target recognition and enzymatic activity. Indeed, sites of phosphorylation, methylation and acetylation were identified within the target recognition domain (TRD) of DnmA by mass spectrometry. For phosphorylation, the combination of MS data and bioinformatic analysis revealed that some of the sites could well be targets for specific kinases in vivo. Preliminary 3D modeling of DnmA protein based on homology with hDNMT2 allowed us to show that several identified phosphorylation sites located on the surface of the molecule, where they would be available for kinases. The presence of modifications almost solely within the TRD domain of DnmA could potentially modulate the mode of its interaction with the target nucleic acids. DnmA was able to form denaturant-resistant covalent intermediates with several Dictyostelium tRNAs, using as a target C38 in the anticodon loop. The formation of complexes not always correlated with the data from methylation assays, and seemed to be dependent on both sequence and structure of the tRNA substrate. The pattern, previously suggested by the Helm group for optimal methyltransferase activity of hDNMT2, appeared to contribute significantly in the formation of covalent adducts but was not the only feature of the substrate required for DnmA and hDNMT2 functions. Both enzymes required Mg2+ to form covalent complexes, which indicated that the specific structure of the target tRNA was indispensable. The dynamics of covalent adduct accumulation was different for DnmA and different tRNAs. Interestingly, the profiles of covalent adduct accumulation for different tRNAs were somewhat similar for DnmA and hDNMT2 enzymes. According to the proposed catalytic mechanism for DNA m5C MTases, the observed denaturant-resistant complexes corresponded to covalent enamine intermediates. The apparent discrepancies in the data from covalent complex formation and methylation assays may be interpreted by the possibility of alternative pathways of the catalytic mechanism, leading not to methylation but to exchange or demethylation reactions. The reversibility of enamine intermediate formation should also be considered. Curiously, native gel retardation assays showed no or little difference in binding affinities of DnmA to different RNA substrates and thus the absence of specificity in the initial enzyme binding. The meaning of the tRNA methylation as well as identification of novel RNA substrates in vivo should be the aim of further experiments.

Systematics and evolution of the genus Deuterocohnia Mez (Bromeliaceae)

The present study investigates the systematics and evolution of the Neotropical genus Deuterocohnia Mez (Bromeliaceae). It provides a comprehensive taxonomic revision as well as phylogenetic analyses based on chloroplast and nuclear DNA sequences and presents a hypothesis on the evolution of the genus. A broad morphological, anatomical, biogeographical and ecological overview of the genus is given in the first part of the study. For morphological character assessment more than 700 herbarium specimens from 39 herbaria as well as living plant material in the field and in the living collections of botanical gardens were carefully examined. The arid habitats, in which the species of Deuterocohnia grow, are reflected by the morphological and anatomical characters of the species. Important characters for species delimitation were identified, like the length of the inflorescence, the branching order, the density of flowers on partial inflorescences, the relation of the length of the primary bracts to that of the partial inflorescence, the sizes of floral bracts, sepals and petals, flower colour, the presence or absence of a pedicel, the curvature of the stamina and the petals during anthesis. After scrutinizing the nomenclatural history of the taxa belonging to Deuterocohnia – including the 1992 syonymized genus Abromeitiella – 17 species, 4 subspecies and 4 varieties are accepted in the present revision. Taxonomic changes were made in the following cases: (I) New combinations: A. abstrusa (A. Cast.) N. Schütz is re-established – as defined by Castellanos (1931) – and transfered to D. abstrusa; D. brevifolia (Griseb.) M.A. Spencer & L.B. Sm. includes accessions of the former D. lorentziana (Mez) M.A. Spencer & L.B. Sm., which are not assigned to D. abstrusa; D. bracteosa W. Till is synonymized to D. strobilifera Mez; D. meziana Kuntze ex Mez var. carmineo-viridiflora Rauh is classified as a subspecies of D. meziana (ssp. carmineo-viridiflora (Rauh) N. Schütz); D. pedicellata W. Till is classified as a subspecies of D. meziana (ssp. pedicellata (W. Till) N. Schütz); D. scapigera (Rauh & L. Hrom.) M.A. Spencer & L.B. Sm ssp. sanctae-crucis R. Vásquez & Ibisch is classified as a species (D. sanctae-crucis (R. Vásquez & Ibisch) N. Schütz); (II) New taxa: a new subspecies of D. meziana Kuntze ex Mez is established; a new variety of D. scapigera is established; (the new taxa will be validly published elsewhere); (III) New type: an epitype for D. longipetala was chosen. All other species were kept according to Spencer and Smith (1992) or – in the case of more recently described species – according to the protologue. Beside the nomenclatural notes and the detailed descriptions, information on distribution, habitat and ecology, etymology and taxonomic delimitation is provided for the genus and for each of its species. An key was constructed for the identification of currently accepted species, subspecies and varieties. The key is based on easily detectable morphological characters. The former synonymization of the genus Abromeitiella into Deuterocohnia (Spencer and Smith 1992) is re-evalutated in the present study. Morphological as well as molecular investigations revealed Deuterocohnia incl. Abromeitiella as being monophyletic, with some indications that a monophyletic Abromeitiella lineage arose from within Deuterocohnia. Thus the union of both genera is confirmed. The second part of the present thesis describes and discusses the molecular phylogenies and networks. Molecular analyses of three chloroplast intergenic spacers (rpl32-trnL, rps16-trnK, trnS-ycf3) were conducted with a sample set of 119 taxa. This set included 103 Deuterocohnia accessions from all 17 described species of the genus and 16 outgroup taxa from the remainder of Pitcairnioideae s.str. (Dyckia (8 sp.), Encholirium (2 sp.), Fosterella (4 sp.) and Pitcairnia (2 sp.)). With its high sampling density, the present investigation by far represents the most comprehensive molecular study of Deuterocohnia up till now. All data sets were analyzed separately as well as in combination, and various optimality criteria for phylogenetic tree construction were applied (Maximum Parsimony, Maximum Likelihood, Bayesian inferences and the distance method Neighbour Joining). Congruent topologies were generally obtained with different algorithms and optimality criteria, but individual clades received different degrees of statistical support in some analyses. The rps16-trnK locus was the most informative among the three spacer regions examined. The results of the chloroplast DNA analyses revealed a highly supported paraphyly of Deuterocohnia. Thus, the cpDNA trees divide the genus into two subclades (A and B), of which Deuterocohnia subclade B is sister to the included Dyckia and Encholirium accessions, and both together are sister to Deuterocohnia subclade A. To further examine the relationship between Deuterocohnia and Dyckia/Encholirium at the generic level, two nuclear low copy markers (PRK exon2-5 and PHYC exon1) were analysed with a reduced taxon set. This set included 22 Deuterocohnia accessions (including members of both cpDNA subclades), 2 Dyckia, 2 Encholirium and 2 Fosterella species. Phylogenetic trees were constructed as described above, and for comparison the same reduced taxon set was also analysed at the three cpDNA data loci. In contrast to the cpDNA results, the nuclear DNA data strongly supported the monophyly of Deuterocohnia, which takes a sister position to a clade of Dyckia and Encholirium samples. As morphology as well as nuclear DNA data generated in the present study and in a former AFLP analysis (Horres 2003) all corroborate the monophyly of Deuterocohnia, the apparent paraphyly displayed in cpDNA analyses is interpreted to be the consequence of a chloroplast capture event. This involves the introgression of the chloroplast genome from the common ancestor of the Dyckia/ Encholirium lineage into the ancestor of Deuterocohnia subclade B species. The chloroplast haplotypes are not species-specific in Deuterocohnia. Thus, one haplotype was sometimes shared by several species, where the same species may harbour different haplotypes. The arrangement of haplotypes followed geographical patterns rather than taxonomic boundaries, which may indicate some residual gene flow among populations from different Deuteroccohnia species. Phenotypic species coherence on the background of ongoing gene flow may then be maintained by sets of co-adapted alleles, as was suggested by the porous genome concept (Wu 2001, Palma-Silva et al. 2011). The results of the present study suggest the following scenario for the evolution of Deuterocohnia and its species. Deuterocohnia longipetala may be envisaged as a representative of the ancestral state within the genus. This is supported by (1) the wide distribution of this species; (2) the overlap in distribution area with species of Dyckia; (3) the laxly flowered inflorescences, which are also typical for Dyckia; (4) the yellow petals with a greenish tip, present in most other Deuterocohnia species. The following six extant lineages within Deuterocohnia might have independently been derived from this ancestral state with a few changes each: (I) D. meziana, D. brevispicata and D. seramisiana (Bolivia, lowland to montane areas, mostly reddish-greenish coloured, very laxly to very densely flowered); (II) D. strobilifera (Bolivia, high Andean mountains, yellow flowers, densely flowered); (III) D. glandulosa (Bolivia, montane areas, yellow-greenish flowers, densely flowered); (IV) D. haumanii, D. schreiteri, D. digitata, and D. chrysantha (Argentina, Chile, E Andean mountains and Atacama desert, yellow-greenish flowers, densely flowered); (V) D. recurvipetala (Argentina, foothills of the Andes, recurved yellow flowers, laxly flowered); (VI) D. gableana, D. scapigera, D. sanctae-crucis, D. abstrusa, D. brevifolia, D. lotteae (former Abromeitiella species, Bolivia, Argentina, higher Andean mountains, greenish-yellow flowers, inflorescence usually simple). Originating from the lower montane Andean regions, at least four lineages of the genus (I, II, IV, VI) adapted in part to higher altitudes by developing densely flowered partial inflorescences, shorter flowers and – in at least three lineages (II, IV, VI) – smaller rosettes, whereas species spreading into the lowlands (I, V) developed larger plants, laxly flowered, amply branched inflorescences and in part larger flowers (I).

Mikromechanisch durchstimmbare, dielektrische Fabry-Pérot-Filter im nahen Infrarot-Bereich: Konzept, Herstellung und Charakterisierung

Das Ziel der vorliegenden Arbeit war die Herstellung und Charakterisierung mikromechanisch durchstimmbarer, dielektrischer Fabry-Pérot-Filter im nahen Infrarot-Bereich bei einer Zentralwellenlänge von λc = 950 nm. Diese Bauelemente wurden auf Basis kostengünstiger Technologien realisiert, dank deren Entwicklung extreme Miniaturisierung und gleichzeitig hohe spektrale Anforderungen möglich sind. Der Vorteil solcher Filter liegt darin, dass sie direkt in einen Photodetektor integriert werden können und mit ganz wenigen Komponenten zu einem kompakten Spektrometermodul zusammengesetzt werden können. Die Baugröße ist nur durch die Größe des Photodetektors limitiert und die gesamte Intensität des einfallenden Lichts kann vorteilhaft auf eine einzelne Filtermembran des Fabry-Pérot-Filters fokussiert werden. Für den Filteraufbau werden zwei hochreflektierende, dielektrische DBR-Spiegel, ein organisches Opferschichtmaterial, welches zur Erzeugung einer Luftkavität im Filter dient, und zwei unterschiedliche Elektroden aus ITO und Aluminium verwendet. Die mikromechanische Auslenkung der freigelegten Filtermembran geschieht mittels elektrostatischer Aktuation, wobei auf diese Weise die Kavitätshöhe des Fabry-Pérot-Filters geändert wird und somit dieser im erforderlichen Spektralbereich optisch durchgestimmt wird. Das in dieser Arbeit gewählte Filterkonzept stellt eine Weiterentwicklung eines bereits bestehenden Filterkonzepts für den sichtbaren Spektralbereich dar. Zum Einen wurden in dieser Arbeit das vertikale und das laterale Design der Filterstrukturen geändert. Eine entscheidende Änderung lag im mikromechanisch beweglichen Teil des Fabry-Pérot-Filters. Dieser schließt den oberen DBR-Spiegel und ein aus dielektrischen Schichten und der oberen Aluminium-Elektrode bestehendes Membranhaltesystem ein, welches später durch Entfernung der Opferschicht freigelegt wird. Die Fläche des DBR-Spiegels wurde auf die Fläche der Filtermembran reduziert und auf dem Membranhaltesystem positioniert. Zum Anderen wurde im Rahmen dieser Arbeit der vertikale Schichtaufbau des Membranhaltesystems variiert und der Einfluss der gewählten Materialien auf die Krümmung der freistehenden Filterstrukturen, auf das Aktuationsverhalten und auf die spektralen Eigenschaften des gesamten Filters untersucht. Der Einfluss der mechanischen Eigenschaften dieser Materialien spielt nämlich eine bedeutende Rolle bei der Erhaltung der erforderlichen optischen Eigenschaften des gesamten Filters. Bevor Fabry-Pérot-Filter ausgeführt wurden, wurde die mechanische Spannung in den einzelnen Materialien des Membranhaltesystems bestimmt. Für die Messung wurde Substratkrümmungsmethode angewendet. Es wurde gezeigt, dass die Plasmaanregungsfrequenzen der plasmaunterstützten chemischen Gasphasenabscheidung bei einer Prozesstemperatur von 120 °C die mechanische Spannung von Si3N4 enorm beeinflussen. Diese Ergebnisse wurden im Membranhaltesystem umgesetzt, wobei verschiedene Filter mit unterschiedlichen mechanischen Eigenschaften des Membranhaltesystems gezeigt wurden. Darüber hinaus wurden optische Eigenschaften der Filter unter dem Einfluss des lateralen Designs der Filterstrukturen untersucht. Bei den realisierten Filtern wurden ein optischer Durchstimmbereich von ca. 70 nm und eine spektrale Auflösung von 5 nm erreicht. Die erreichte Intensität der Transmissionslinie liegt bei 45-60%. Diese Parameter haben für den späteren spektroskopischen Einsatz der realisierten Fabry-Pérot-Filter eine hohe Bedeutung. Die Anwendung soll erstmalig in einem „Proof of Concept“ stattfinden, wobei damit die Oberflächentemperatur eines GaAs-Wafers über die Messung der spektralen Lage seiner Bandlücke bestimmt werden kann.

Optimization of the Mechanical and Optical Properties of Tunable Optical Sensor Arrays (TOSA) for a Nanospectrometer in the Visible and Near Infrared Spectral Range

Tunable Optical Sensor Arrays (TOSA) based on Fabry-Pérot (FP) filters, for high quality spectroscopic applications in the visible and near infrared spectral range are investigated within this work. The optical performance of the FP filters is improved by using ion beam sputtered niobium pentoxide (Nb2O5) and silicon dioxide (SiO2) Distributed Bragg Reflectors (DBRs) as mirrors. Due to their high refractive index contrast, only a few alternating pairs of Nb2O5 and SiO2 films can achieve DBRs with high reflectivity in a wide spectral range, while ion beam sputter deposition (IBSD) is utilized due to its ability to produce films with high optical purity. However, IBSD films are highly stressed; resulting in stress induced mirror curvature and suspension bending in the free standing filter suspensions of the MEMS (Micro-Electro-Mechanical Systems) FP filters. Stress induced mirror curvature results in filter transmission line degradation, while suspension bending results in high required filter tuning voltages. Moreover, stress induced suspension bending results in higher order mode filter operation which in turn degrades the optical resolution of the filter. Therefore, the deposition process is optimized to achieve both near zero absorption and low residual stress. High energy ion bombardment during film deposition is utilized to reduce the film density, and hence the film compressive stress. Utilizing this technique, the compressive stress of Nb2O5 is reduced by ~43%, while that for SiO2 is reduced by ~40%. Filters fabricated with stress reduced films show curvatures as low as 100 nm for 70 μm mirrors. To reduce the stress induced bending in the free standing filter suspensions, a stress optimized multi-layer suspension design is presented; with a tensile stressed metal sandwiched between two compressively stressed films. The stress in Physical Vapor Deposited (PVD) metals is therefore characterized for use as filter top-electrode and stress compensating layer. Surface micromachining is used to fabricate tunable FP filters in the visible spectral range using the above mentioned design. The upward bending of the suspensions is reduced from several micrometers to less than 100 nm and 250 nm for two different suspension layer combinations. Mechanical tuning of up to 188 nm is obtained by applying 40 V of actuation voltage. Alternatively, a filter line with transmission of 65.5%, Full Width at Half Maximum (FWHM) of 10.5 nm and a stopband of 170 nm (at an output wavelength of 594 nm) is achieved. Numerical model simulations are also performed to study the validity of the stress optimized suspension design for the near infrared spectral range, wherein membrane displacement and suspension deformation due to material residual stress is studied. Two bandpass filter designs based on quarter-wave and non-quarter-wave layers are presented as integral components of the TOSA. With a filter passband of 135 nm and a broad stopband of over 650 nm, high average filter transmission of 88% is achieved inside the passband, while maximum filter transmission of less than 1.6% outside the passband is achieved.

Hierarchical Object Recognition Using Libraries of Parameterized Model Sub-Parts

This thesis describes the development of a model-based vision system that exploits hierarchies of both object structure and object scale. The focus of the research is to use these hierarchies to achieve robust recognition based on effective organization and indexing schemes for model libraries. The goal of the system is to recognize parameterized instances of non-rigid model objects contained in a large knowledge base despite the presence of noise and occlusion. Robustness is achieved by developing a system that can recognize viewed objects that are scaled or mirror-image instances of the known models or that contain components sub-parts with different relative scaling, rotation, or translation than in models. The approach taken in this thesis is to develop an object shape representation that incorporates a component sub-part hierarchy- to allow for efficient and correct indexing into an automatically generated model library as well as for relative parameterization among sub-parts, and a scale hierarchy- to allow for a general to specific recognition procedure. After analysis of the issues and inherent tradeoffs in the recognition process, a system is implemented using a representation based on significant contour curvature changes and a recognition engine based on geometric constraints of feature properties. Examples of the system's performance are given, followed by an analysis of the results. In conclusion, the system's benefits and limitations are presented.

Exercise sheet 4 pdf

Exercises and solutions in PDF

Exercise sheet 5 pdf

Exercises and solutions in PDF

Exercise sheet 4

Exercises and solutions in LaTex

Exercise sheet 5

Exercises and solutions in LaTex

Cirugía bariatrica : gastrogastroplastia laparoscopica y bypass gástrico en pacientes con obesidad mórbida

La obesidad es un problema de salud global siendo la cirugía bariatrica el mejor tratamiento demostrado. El Bypass gástrico (BGYR) es el método más utilizado que combina restricción y malabsorcion; sin embargo los procedimientos restrictivos se han popularizado recientemente. La Gastro-gastroplastia produce restricción gástrica reversible por medio de un pouch gástrico con anastomosis gastrogástrica y propusimos su evaluación Métodos: Estudio retrospectivo no randomizado que evaluó archivos de pacientes con GG y BGYR laparoscópicos entre febrero de 2008 y Abril de 2011 Resultados: 289 pacientes identificados: 180 GG y 109 BGYR de los cuales 138 cumplieron criterios de inclusión, 77 (55.8%) GG y 61 (44,2%) BGYR, 18 (13%) hombres y 120 (87%) mujeres. Para GG la mediana del peso inicial fue 97,15 (± 17,3) kg, IMC inicial de 39,35 (± 3,38) kg/m2 y exceso de peso de 37,1 (±11,9). La mediana de IMC a los 1, 6 y 12 meses fue 34,8 (±3,58) kg/m2, 30,81 (±3,81) kg/m2, 29,58 (±4,25) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 30,9 (±14,2) %, 61,88 (±18,27) %, 68,4 (±19,64) % respectivamente. Para BGYR la mediana del peso inicial fue 108,1 (± 25,4) kg, IMC inicial 44,4 (± 8,1) y exceso de peso de 48,4 (±15,2) %. La mediana de IMC a los 1, 6 y 12 meses fue 39 (±7,5) kg/m2, 33,31 (±4,9) kg/m2, 30,9 (±4,8) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 25,9 (±12,9) %, 61,87 (±18,62) %, 71,41 (±21,09) % respectivamente. Seguimiento a un año Conclusiones: La gastro-gastroplastia se plantea como técnica restrictiva, reversible, con resultados óptimos en reducción de peso y alternativa quirúrgica en pacientes con obesidad. Son necesarios estudios a mayor plazo para demostrar mantenimiento de cambios en el tiempo

Cirugía bariatrica : gastrogastroplastia laparoscópica y bypass gástrico en pacientes con obesidad mórbida

La obesidad es un problema de salud global siendo la cirugía bariatrica el mejor tratamiento demostrado. El Bypass Gástrico (BGYR) es el método más utilizado que combina restricción y malabsorcion; sin embargo los procedimientos restrictivos se han popularizado recientemente. La Gastro-gastroplastia produce restricción gástrica reversible por medio de un pouch gástrico con anastomosis gastrogástrica y propusimos su evaluación Métodos: Estudio retrospectivo no randomizado que evaluó archivos de pacientes con GG y BGYR laparoscópicos entre Febrero de 2008 y Abril de 2011 Resultados: 289 pacientes identificados: 180 GG y 109 BGYR de los cuales 138 cumplieron criterios de inclusión, 77 (55.8%) GG y 61 (44,2%) BGYR, 18 (13%) hombres y 120 (87%) mujeres. Para GG la mediana del peso inicial fue 97,15 (± 17,3) kg, IMC inicial de 39,35 (± 3,38) kg/m2 y exceso de peso de 37,1 (±11,9). La mediana de IMC a los 1, 6 y 12 meses fue 34,8 (±3,58) kg/m2, 30,81 (±3,81) kg/m2, 29,58 (±4,25) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 30,9 (±14,2) %, 61,88 (±18,27) %, 68,4 (±19,64) % respectivamente. Para BGYR la mediana del peso inicial fue 108,1 (± 25,4) kg, IMC inicial 44,4 (± 8,1) y exceso de peso de 48,4 (±15,2) %. La mediana de IMC a los 1, 6 y 12 meses fue 39 (±7,5) kg/m2, 33,31 (±4,9) kg/m2, 30,9 (±4,8) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 25,9 (±12,9) %, 61,87 (±18,62) %, 71,41 (±21,09) % respectivamente. Seguimiento a un año. Conclusiones: La gastro-gastroplastia se plantea como técnica restrictiva, reversible, con resultados óptimos en reducción de peso y alternativa quirúrgica en pacientes con obesidad. Son necesarios estudios a mayor plazo para demostrar mantenimiento de cambios en el tiempo.

Evaluación a largo plazo en mujeres tratadas con laser para depilación facial en uniláser medica

El vello facial no deseado es un problema común en las mujeres, los tratamientos láser han mostrado efectividad para su manejo. Objetivo: Evaluar los resultados de la depilación láser en cara de las pacientes tratadas a largo plazo (20 sesiones o más ) luego de un seguimiento de 6 meses durante los años 1997 y 2012. Metodología: 55 mujeres que con tipo de piel II a V recibieron 20 o más sesiones de láser con seguimiento mayor a 6 meses posterior al la última sesión. Resultados: la edad promedio fue (32 ± 9,3 años), el 18,2 % presentaban SOP o Hiperandrogenismo el número de sesiones en cara fue de (30,84 ± 12,132), un promedio de disparos de (6,330 ± 7,804), los Kilojulios acumulados tuvieron un promedio de (126,5 ± 161,4) la fluencia promedio fue (18,5 ± 3,2 Julios/cm2), el láser de Alexandrita fue utilizado en el 98% de las pacientes. Se encontró cambios significativos entre el conteo inicial y el final de vello facial (484,9 ± 568.9 (med=300) vs. 103,33± 138,63 (med=60), p<0.001, Test de Wilcoxon). El 32.7% mostraron reducción > 90% (5,5% reducción del 100%). Conclusión : El tratamiento con de depilación con láser mostro una reducción significativa del vello facial, en mujeres mayores de 14 años con un tratamiento a largo plazo (20 sesiones o más), con una tasa de reducción mayor del 90% en 32.7% de las pacientes y un promedio de reducción del grupo de 79,36 ±15,51 %, similar a lo reportado en los diferentes estudios (77%).

Anatomía Cerebral del mono araña Ateles geoffroyi estudiada utilizando imágenes de resonancia magnética. Primer reporte: estudio comparativo con el cerebro humano Homo Sapiens

El objetivo del presente estudio cualitativo fue analizar los aspectos morfológicos de la anatomía cerebral interna utilizando imágenes de resonancia magnética (IRM) en dos especies de primates, El mono Araña (A. geoffroyi) y el humano (H. sapiens), tomando como base un estudio comparativo de las estructuras cerebrales de las dos especies, concentrándose primordialmente en el sistema límbico del cerebro del mono araña. Aunque es una especie común en el hemisferio occidental, es interesante para estudiar dada su organización social y funciones motoras, el mono araña (A. geoffroyi) ha sido poco estudiado en cuanto a su neuroanatomía. Las IRM fueron hechas a un mono araña utilizando un resonador General Electrics Signa 1.5 T. Esta investigación se llevo a cabo conforme a las leyes internacionales para la protección de animales en cautiverio y teniendo en cuenta todas las medidas de protección para el manejo experimental para evitar cualquier efecto residual de índole comportamental o fisiológico. Desde un punto de vista cualitativo, los cerebros del mono araña y el humano tenían estructuras similares. Con respecto a la forma, las estructuras más parecidas fueron encontradas en el sistema límbico, sin embargo la curvatura cervical, la amígdala, el hipocampo, la comisura anterior y el colículo fueron más grandes proporcionalmente en el mono araña que en el humano.

Estudio de caso: terapia manual en una paciente de 18 años con escoliosis juvenil idiopática

La escoliosis es una desviación lateral de la columna vertebral desde la línea media, caracterizada por una curvatura lateral y por una rotación vertebral. Generalmente, es de carácter idiopático y se presenta, principalmente, en niñas adolescentes. Existen múltiples técnicas de tratamiento conservador para la escoliosis, entre las cuales se encuentran la terapia manual, que complementa el tratamiento para dicha patología. Esta terapia utiliza menos medios físicos, más manipulación de tejidos blandos y óseos, y logra así una recuperación más eficaz, con una mejor calidad de vida. El objetivo de este estudio de caso es comparar y describir los cambios en las condiciones de una paciente de 18 años, con escoliosis idiopática juvenil en columna toracolumbar izquierda, al aplicar un tratamiento de terapia manual. Se realizaron procedimientos de valoración integral mediante terapia manual, ortopedia, postura computarizada, análisis del puesto de trabajo, tratamiento con medios físicos y movilización de las articulaciones torácicas y lumbares, en los segmentos vertebrales que presentaban disminución del deslizamiento inferior de las carillas inferiores de la vértebra superior, sobre las carillas superiores de la vértebra inferior (segmentos T5-T6, T6-T7, T7-T8, T8-T9);técnicas de energía muscular, ejercicios de reeducación postural global, estabilización cervical y lumbar, ejercicios de fortalecimiento para musculatura débil del hemicuerpo izquierdo y de estiramiento, con el fin de elongar la musculatura retraída del hemicuerpo derecho. Al iniciar el tratamiento, se verificó, mediante una radiografía, que el ángulo de Cobb era de 24º; después de las sesiones de terapia manual se logró reducir a 18º, lo que generó una disminución significativa de 6º. Se verificó la efectividad del tratamiento por la disminución del dolor, el aumento de la fuerza muscular, la realineación postural, la satisfacción del paciente y la recuperación significativa comprobada por los estudios radiológicos.

Anatomía Cerebral del mono araña Ateles geoffroyi estudiada utilizando imágenes de resonancia magnética. Primer reporte: estudio comparativo con el cerebro humano Homo Sapiens

El objetivo del presente estudio cualitativo fue analizar los aspectos morfológicos de la anatomía cerebral interna utilizando imágenes de resonancia magnética (IRM) en dos especies de primates, El mono Araña (A. geoffroyi) y el humano (H. sapiens), tomando como base un estudio comparativo de las estructuras cerebrales de las dos especies, concentrándose primordialmente en el sistema límbico del cerebro del mono araña. Aunque es una especie común en el hemisferio occidental, es interesante para estudiar dada su organización social y funciones motoras, el mono araña (A. geoffroyi) ha sido poco estudiado en cuanto a su neuroanatomía. Las IRM fueron hechas a un mono araña utilizando un resonador General Electrics Signa 1.5 T. Esta investigación se llevo a cabo conforme a las leyes internacionales para la protección de animales en cautiverio y teniendo en cuenta todas las medidas de protección para el manejo experimental para evitar cualquier efecto residual de índole comportamental o fisiológico. Desde un punto de vista cualitativo, los cerebros del mono araña y el humano tenían estructuras similares. Con respecto a la forma, las estructuras más parecidas fueron encontradas en el sistema límbico, sin embargo la curvatura cervical, la amígdala, el hipocampo, la comisura anterior y el colículo fueron más grandes proporcionalmente en el mono araña que en el humano.