Effects of anatomic conformation on three-dimensional motion of the caudal lumbar and lumbosacral portions of the vertebral column of dogs

OBJECTIVE: To determine the association between the 3-dimensional (3-D) motion pattern of the caudal lumbar and lumbosacral portions of the canine vertebral column and the morphology of vertebrae, facet joints, and intervertebral disks. SAMPLE POPULATION: Vertebral columns of 9 German Shepherd Dogs and 16 dogs of other breeds with similar body weights and body conditions. PROCEDURE: Different morphometric parameters of the vertebral column were assessed by computed tomography (CT) and magnetic resonance imaging. Anatomic conformation and the 3-D motion pattern were compared, and correlation coefficients were calculated. RESULTS: Total range of motion for flexion and extension was mainly associated with the facet joint angle, the facet joint angle difference between levels of the vertebral column in the transverse plane on CT images, disk height, and lever arm length. CONCLUSIONS AND CLINICAL RELEVANCE: Motion is a complex process that is influenced by the entire 3-D conformation of the lumbar portion of the vertebral column. In vivo dynamic measurements of the 3-D motion pattern of the lumbar and lumbosacral portions of the vertebral column will be necessary to further assess biomechanics that could lead to disk degeneration in dogs.

Designed Extension of Survival Studies: Application to Clinical Trials with Unrecognized Heterogeneity

It is well known that unrecognized heterogeneity among patients, such as is conferred by genetic subtype, can undermine the power of randomized trial, designed under the assumption of homogeneity, to detect a truly beneficial treatment. We consider the conditional power approach to allow for recovery of power under unexplained heterogeneity. While Proschan and Hunsberger (1995) confined the application of conditional power design to normally distributed observations, we consider more general and difficult settings in which the data are in the framework of continuous time and are subject to censoring. In particular, we derive a procedure appropriate for the analysis of the weighted log rank test under the assumption of a proportional hazards frailty model. The proposed method is illustrated through application to a brain tumor trial.

Thrombolysis in patients with acute stroke caused by cervical artery dissection: analysis of 9 patients and review of the literature

BACKGROUND: Results of recently published studies suggest that intravenous thrombolysis (IVT) and local intra-arterial thrombolysis (LIT) are feasible procedures in acute stroke after cervical artery dissection (CAD). OBJECTIVES: To describe 9 patients with acute stroke caused by CAD who were treated by LIT (n = 7) or IVT (n = 2) and to review the literature. METHODS: Retrospective analysis of clinical and neuroradiological findings; literature review from 1980 to present. MAIN OUTCOME MEASURE: Modified Rankin Scale (mRS) score. RESULTS: Of 7 patients treated with LIT, 3 had good outcomes (mRS score of 0-2) and 4 had bad outcomes (mRS score of 3-6) at 3 months. The 2 patients who had received IVT recovered to mRS scores of 0 and 3. Twenty-one patients were identified in the literature. Overall (N = 30), in the IVT group (n = 19), the outcome was good in 8 patients (42%) and bad in 11 (58%); in the LIT group (n = 11), 6 patients (55%) had a good outcome and 5 (45%) had a bad outcome. Overall, 47% (14/30) of the patients (IVT and LIT groups) had a good outcome. Total mortality was 13% (4/30). There were no secondary complications due to extension of wall hematoma or angiography. One symptomatic hemorrhage occurred. CONCLUSIONS: Thrombolysis is feasible in acute stroke caused by CAD. Local complications from extension of wall hematoma did not occur. Further prospective studies are needed to determine the safety and efficacy of thrombolysis in the special circumstance of acute stroke caused by CAD.

EVALUATION OF THE EVOLVING STRESS FIELD OF THE YELLOWSTONE VOLCANIC PLATEAU FROM 1988 TO 2010 FROM EARTHQUAKE FIRST MOTIONS INVERSION

Within the Yellowstone National Park, Wyoming, the silicic Yellowstone volcanic field is one of the most active volcanic systems all over the world. Although the last rhyolite eruption occurred around 70,000 years ago, Yellowstone is still believed to be volcanically active, due to high hydrothermal and seismic activity. The earthquake data used in this study cover the period of time between 1988 and 2010. Earthquake relocations and a set of 369 well-constrained, double-couple, focal mechanism solutions were computed. Events were grouped according to location and time to investigate trends in faulting. The majority of the events has oblique, normal-faulting solutions. The overall direction of extension throughout the 0.64 Ma Yellowstone caldera looks nearly ENE, consistently with the direction of alignments of volcanic vents within the caldera, but detailed study revealed spatial and temporal variations. Stress-field solutions for different areas and time periods were calculated from earthquake focal mechanism inversion. A well-resolved rotation of σ3 was found, from NNE-SSW near the Hebgen Lake fault zone, to ENE-WSW near Norris Junction. In particular, the σ3 direction changed throughout the years in the Norris Junction area, from being ENE-WSW, as calculated in the study by Waite and Smith (2004), to NNE-SSW, while the other σ3 directions are mostly unchanged over time. The Yellowstone caldera was subject to periods of net uplift and subsidence over the past century, explained in previous studies as caused by expanding or contracting sills, at different depths. Based on the models used to explain these deformation periods, we investigated the relationship between variability in aseismic deformation and seismic activity and faulting styles. Focal mechanisms and P and T axes were divided into temporal and depth intervals, in order to identify spatial or temporal trends in deformation. The presence of “chocolate tablet” structures, with composite dilational faults, was identified in many stages of the deformation history both in the Norris Geyser Basin area and inside the caldera. Strike-slip component movement was found in a depth interval below a contracting sill, indicating the movement of magma towards the caldera.

Survival in surgically treated, nodal positive prostate cancer patients is predicted by histopathological characteristics of the primary tumor and its lymph node metastases

BACKGROUND: Histopathological risk factors for survival stratification of surgically treated nodal positive prostate cancer patients are poorly defined as reflected by only one category for nodal metastases. METHODS: We evaluated biochemical recurrence-free survival (RFS), disease-specific survival (DSS), and overall survival (OS) in 102 nodal positive, hormone treatment-naïve prostate cancer patients (median age: 65 years, range: 45-75 years; median follow-up 7.7 years, range: 1.0-15.9 years) who underwent radical prostatectomy and standardized extended lymphadenectomy. RESULTS: A significant stratification was possible, with the Gleason score of the primary and virtually all nodal parameters favoring patients with better differentiated primaries and metastases, lower nodal tumor burden, and without extranodal extension of metastases. In multivariate analyses, diameter of the largest metastasis (< or =10 mm vs. >10 mm) was the strongest independent predictor for RFS (P < 0.001), DSS (P < 0.001), and OS (P < 0.001) with a more than quadrupled relative risk of cancer related deaths for patients with larger metastases (Hazard ratio: 4.2, Confidence interval: 2.0-8.9; 5-year RFS/DSS/OS: 18%/57%/54%). The highest 5-year survival rates were seen in patients with micrometastases only (RFS/DSS/OS: 47%/94%/94%). CONCLUSION: The TNM classification's current allocation of only one category for nodal metastases in prostate cancers is unsatisfactory since subgroups with significantly different prognoses can be identified. The diameter of the patient's largest metastasis (< or =10 mm vs. >10 mm) should be used for substaging because of its independent prognostic value. The substage "micrometastasis only" is also useful in nodal positive prostate cancer since it designates the subgroup with the most favorable outcome.

A systematic review of the survival and complication rates of implant supported fixed dental prostheses with cantilever extensions after an observation period of at least 5 years

OBJECTIVE: The aim of this systematic review was to assess the survival rates of short-span implant-supported cantilever fixed dental prostheses (ICFDPs) and the incidence of technical and biological complications after an observation period of at least 5 years. MATERIAL AND METHODS: An electronic MEDLINE search supplemented by manual searching was conducted to identify prospective or retrospective cohort studies reporting data of at least 5 years on ICFDPs. Five- and 10-year estimates for failure and complication rates were calculated using standard or random-effect Poisson regression analysis. RESULTS: The five studies eligible for the meta-analysis yielded an estimated 5- and 10-year ICFDP cumulative survival rate of 94.3% [95 percent confidence interval (95% CI): 84.1-98%] and 88.9% (95% CI: 70.8-96.1%), respectively. Five-year estimates for peri-implantitis were 5.4% (95% CI: 2-14.2%) and 9.4% (95% CI: 3.3-25.4%) at implant and prosthesis levels, respectively. Veneer fracture (5-year estimate: 10.3%; 95% CI: 3.9-26.6%) and screw loosening (5-year estimate: 8.2%; 95% CI: 3.9-17%) represented the most common complications, followed by loss of retention (5-year estimate: 5.7%; 95% CI: 1.9-16.5%) and abutment/screw fracture (5-year estimate: 2.1%; 95% CI: 0.9-5.1%). Implant fracture was rare (5-year estimate: 1.3%; 95% CI: 0.2-8.3%); no framework fracture was reported. Radiographic bone level changes did not yield statistically significant differences either at the prosthesis or at the implant levels when comparing ICFDPs with short-span implant-supported end-abutment fixed dental prostheses. CONCLUSIONS: ICFDPs represent a valid treatment modality; no detrimental effects can be expected on bone levels due to the presence of a cantilever extension per se.

Reproducibility and accuracy of the ICDAS-II for occlusal caries detection

OBJECTIVES: The aim of this in vitro study was to assess the inter- and intra-examiner reproducibility and the accuracy of the International Caries Detection and Assessment System-II (ICDAS-II) in detecting occlusal caries. METHODS: One hundred and sixty-three molars were independently assessed twice by two experienced dentists using the 0- to 6-graded ICDAS-II. The teeth were histologically prepared and classified using two different histological systems [Ekstrand et al. (1997) Caries Research vol. 31, pp. 224-231; Lussi et al. (1999) Caries Research vol. 33, pp. 261-266] and assessed for caries extension. Sensitivity, specificity, accuracy and area under the ROC curve (A(z)) were obtained at D(2) and D(3) thresholds. Unweighted kappa coefficient was used to assess inter- and intra-examiner reproducibility. RESULTS: For the Ekstrand et al. histological classification the sensitivity was 0.99 and 1.00, specificity 1.00 and 0.69 and accuracy 0.99 and 0.76 at D(2) and D(3), respectively. For the Lussi et al. histological classification the sensitivity was 0.91 and 0.75, specificity 0.47 and 0.62 and accuracy 0.86 and 0.68 at D(2) and D(3), respectively. The A(z) varied from 0.54 to 0.73. The inter- and intra-examiner kappa values were 0.51 and 0.58, respectively. CONCLUSIONS: ICDAS-II presented good reproducibility and accuracy in detecting occlusal caries, especially caries lesions in the outer half of the enamel.

Buttress form of the central African rain forest tree Microberlinia bisulcata, and its possible role in nutrient acquisition

Buttressing is a trait special to tropical trees but explanations for its occurrence remain inconclusive. The two main hypotheses are that they provide structural support and/or promote nutrient acquisition. Studies of the first are common but the second has received much less attention. Architectural measurements were made on adult and juvenile trees of the ectomycorrhizal species Microberlinia bisulcata, in Korup (Cameroon). Buttressing on this species is highly distinctive with strong lateral extension of surface roots of the juveniles leading to a mature buttress system of a shallow spreading form on adults. This contrasts with more vertical buttresses, closer to the stem, found on many other tropical tree species. No clear relationship between main buttress and large branch distribution was found. Whilst this does not argue against the essential structural role of buttresses for these very large tropical trees, the form on M. bisulcata does suggest a likely second role, that of aiding nutrient acquisition. At the Korup site, with its deep sandy soils of very low phosphorus status, and where most nutrient cycling takes place in a thin surface layer of fine roots and mycorrhizas, it appears that buttress form could develop from soil-surface root exploration for nutrients by juvenile trees. It may accordingly allow M. bisulcata to attain the higher greater competitive ability, faster growth rate, and maximum tree size that it does compared with other co-occurring tree species. For sites across the tropics in general, the degree of shallowness and spatial extension of buttresses of the dominant species is hypothesized to increase with decreasing nutrient availability.

Compliance of the L5-S1 spinal unit: a comparative study between an unconstrained and a partially constrained system

A comparison between an unconstrained and a partially constrained system for in vitro biomechanical testing of the L5-S1 spinal unit was conducted. The objective was to compare the compliance and the coupling of the L5-S1 unit measured with an unconstrained and a partially constrained test for the three major physiological motions of the human spine. Very few studies have compared unconstrained and partially constrained testing systems using the same cadaveric functional spinal units (FSUs). Seven human L5-S1 units were therefore tested on both a pneumatic, unconstrained, and a servohydraulic, partially constrained system. Each FSU was tested along three motions: flexion-extension (FE), lateral bending (LB) and axial rotation (AR). The obtained kinematics on both systems is not equivalent, except for the FE case, where both motions are similar. The directions of coupled motions were similar for both tests, but their magnitudes were smaller in the partially constrained configuration. The use of a partially constrained system to characterize LB and AR of the lumbosacral FSU decreased significantly the measured stiffness of the segment. The unconstrained system is today's "gold standard" for the characterization of FSUs. The selected partially constrained method seems also to be an appropriate way to characterize FSUs for specific applications. Care should be taken using the latter method when the coupled motions are important.

Cerebral extension of steroid-responsive meningitis arteritis in a boxer

A comatose 30-month-old, entire male boxer was presented because of an acute history of a cluster of three to four seizures. Neurological examination suggested a diffuse to multifocal intracranial lesion. Magnetic resonance tomography revealed symmetrical multifocal to diffuse changes of the cerebral grey matter and ependymal lining with sediment in the lateral ventricles. Haematological examination revealed leucocytosis with neutrophilia. Cerebrospinal fluid examination revealed high protein concentration and polymorphonuclear pleocytosis. Despite antiepileptic treatment, therapy against increased intracranial pressure and antibiosis, the dog's condition continued to deteriorate and he was euthanased. Pathological examination revealed fibrinosuppurative meningo-ependymitis and necrotising arteritis throughout the brain. In addition, chronic inflammation and arterial stenosis was found in the spinal meninges. No infectious agent was found. A diagnosis of steroid-responsive meningitis arteritis was made. The massive extension into the meninges and ventricular system of the forebrain has not been described previously in dogs with steroid-responsive meningitis arteritis and should be considered in the differential diagnosis when an intracranial suppurative infection is suspected.

Injunctions against Innocent Third Parties: The Case of Website Blocking

The paper discusses the phenomenon of injunctions against third parties that are innocent from the tort law perspective. One such type of injunction, website blocking, is currently appearing in the spotlight around various European jurisdictions as a consequence of the implementation of Article 8(3) of the Information Society Directive and Article 11 of the Enforcement Directive. Website-blocking injunctions are used in this paper only as a plastic and perhaps also canonical example of the paradigmatic shift we are facing: the shift from tort-law-centric injunctions to in rem injunctions. The author of this paper maintains that the theoretical framework for the latter injunctions is not in the law of civil wrongs, but in an old Roman law concept of ‘in rem actions’ (actio in rem negatoria). Thus the term ‘in rem injunctions’ is coined to describe this paradigm of injunctions. Besides the theoretical foundations, this paper explains how a system of injunctions against innocent third parties fits into the private law regulation of negative externalities of online technology and explores the expected dangers of derailing injunctions from the tracks of tort law. The author’s PhD project – the important question of the justification of an extension of the intellectual property entitlements by the in rem paradigm, along with its limits or other solutions – is left out from the paper.

Comparison of the biomechanical properties of a ventral cervical intervertebral anchored fusion device with locking plate fixation applied to cadaveric canine cervical spines

OBJECTIVE: To evaluate fixation properties of a new intervertebral anchored fusion device and compare these with ventral locking plate fixation. STUDY DESIGN: In vitro biomechanical evaluation. ANIMALS: Cadaveric canine C4-C7 cervical spines (n = 9). METHODS: Cervical spines were nondestructively loaded with pure moments in a nonconstraining testing apparatus to induce flexion/extension while angular motion was measured. Range of motion (ROM) and neutral zone (NZ) were calculated for (1) intact specimens, (2) specimens after discectomy and fixation with a purpose-built intervertebral fusion cage with integrated ventral fixation, and (3) after removal of the device and fixation with a ventral locking plate. RESULTS: Both fixation techniques resulted in a decrease in ROM and NZ (P < .001) compared with the intact segments. There were no significant differences between the anchored spacer and locking plate fixation. CONCLUSION: An anchored spacer appears to provide similar biomechanical stability to that of locking plate fixation.

Location and dimensions of the mental foramen: a radiographic analysis by using cone-beam computed tomography

INTRODUCTION The mental foramen (MF) is an important landmark in dentistry. Knowledge of its position is central to perform block anesthesia of the mental nerve or to avoid nerve damage during surgical procedures in the premolar area of the mandible. The present radiographic study aimed at evaluating the location and dimension of the MF and measuring distances to neighboring structures by using limited cone-beam computed tomography (CBCT). METHODS Sagittal, axial, and coronal CBCT images of 142 patients (26 bilateral and 116 unilateral cases) were retrospectively screened to determine the location of the MF with respect to adjacent teeth and to take linear measurements of the size of the MF and its distances to the upper and lower borders of the mandible. In addition, the course and angulation of the mental canal exiting the MF were assessed. RESULTS The majority of MF (56%) were located apically between the 2 premolars, and another 35.7% of MF were positioned below the second premolar. On average, the MF was localized 5.0 mm from the closest root of the adjacent tooth (range, 0.3-9.8 mm). The mean size of the MF showed a height of 3.0 mm and a length of 3.2 mm; however, individual cases showed large differences in height (1.8-5.1 mm) and in length (1.8-5.5 mm). All mental canals exiting the MF demonstrated an upward course in the coronal plane, with 70.1% of the mental canal presenting an anterior loop (AL) in the axial view. The mean extension of AL in cases with an AL was 2.3 mm. CONCLUSIONS This study is consistent with previous radiographic studies regarding size and location of MF and distances between MF and adjacent anatomic structures. The assessed bilateral cases showed a high intraindividual concordance for certain features when comparing right and left sides.

Assessment of bone channels other than the nasopalatine canal in the anterior maxilla using limited cone beam computed tomography

PURPOSE The anterior maxilla, sometimes also called premaxilla, is an area frequently requiring surgical interventions. The objective of this observational study was to identify and assess accessory bone channels other than the nasopalatine canal in the anterior maxilla using limited cone beam computed tomography (CBCT). METHODS A total of 176 cases fulfilled the inclusion criteria comprising region of interest, quality of CBCT image, and absence of pathologic lesions or retained teeth. Any bone canal with a minimum diameter of 1.00 mm other than the nasopalatine canal was analyzed regarding size, location, and course, as well as patient gender and age. RESULTS A total of 67 accessory canals ≥1.00 mm were found in 49 patients (27.8%). A higher frequency of accessory canals was observed in males (33.0%) than in females (22.7%) (p = 0.130). Accessory canals occurred more frequently in older rather than younger patients (p = 0.115). The mean diameter of accessory canals was 1.31 ± 0.26 mm (range 1.01-2.13 mm). Gender and age did not significantly influence the diameter. Accessory canals were found palatal to all anterior teeth, but most frequently palatal to the central incisors. In 56.7%, the accessory canals curved superolaterally and communicated with the ipsilateral alveolar extension of the canalis sinuosus. CONCLUSIONS The study confirms the presence of bone channels within the anterior maxilla other than the nasopalatine canal. More than half of these accessory bone canals communicated with the canalis sinuosus. From a clinical perspective, studies are needed to determine the content of these accessory canals.

A 13-Year Summary of the ISU Beef Cow Business Record

A 13-year summary of the Iowa State University Extension Service’s Beef Cow Business Record (BCBR) was compiled to show the trends in cost, profit, and production for beef-cow enterprises in Iowa. During these 13 years, 966 yearly records were summarized on herds with an average size of 74.6 cows. Each year-end summary sorts the producers with profits in the top and the bottom thirds of the group so that differences can be analyzed. The average cost to maintain a beef cow from 1982 to 1994 was $370.80. Cost components included in this average total were: feed and pasture, $177.10; operating, $45.40; depreciation, taxes, and insurance, $19.70; labor, $44.90; and capital, $83.70. Producers sorted into the top one-third profit group had 13-year average total cow costs of $309.80, but the bottom onethird profit group averaged $437.10. Economic returns per cow for these same 13 years were: return to capital, labor, and management, $139.50; return to labor and management, $56.20; and net profit, $20.20. Top-profit producers had an average net profit of $126.20 per cow, whereas the least profitable group had an average loss of $107.40. Of this $233.60 difference, $127.30 was due to production cost, and the remaining $106.30 was caused by gross return differences. The average number of pounds of beef produced per cow from 1984 through 1994 was 567. This production was achieved with 2.5 acres of pasture, 3.9 acres of cornstalk grazing, and 4,675 pounds of stored feed per cow unit. Top-profit producers used 673 pounds of stored feed per hundredweight of production, but the least profitable producers used 1,015 pounds. Top-profit producers produced 74 pounds more per cow while using 1,313 pounds less stored feed.