WATER USE EFFICIENCY, GROWTH AND YIELD OF WHEAT CULTIVATED UNDER COMPETITION WITH Setaria

ABSTRACT Understanding the critical period of weed competition is indispensable in the development of an effective weed management program in field crops. Current experiment was planned to evaluate the critical growth period ofSetaria and level of yield losses associated with delay in weeding in rain-fed drip irrigated wheat production system of Saudi Arabia. Field experiment was conducted to evaluate the effect of weeding interval (07-21, 14-28, 21-35, 28-42 and 35-49 days after sowing) and drought stress (75% and 50% of field capacity) on Setaria growth, wheat yield and water use efficiency. Season long weedy check and wellwatered (100% FC) plots were also maintained for comparison. Weeding interval and drought stress significantly (p ≤ 0.05) affected the growth and yield of Setaria and wheat. Drought stress from 75% to 50% FC resulted in reductions of 29-40% in Setaria height, 14-27% in Setaria density and 11-26% in Setaria dry biomass. All weeding intervals except 35-49 DAS significantly suppressedSetaria growth as compared with control. Delay in weeding increased weed-crop competition interval and reduced wheat yield and yield contributors. Therefore, the lowest yield of 1836 kg ha-1 was attained for weeding interval of 35-49 DAS at 50% FC. Water use efficiency and harvest index increased with decreasing FC levels but reduced with delay in weeding. Correlation analysis predicted negative association ofSetariadensity with wheat yield and yield contributors and the highest negative association was for harvest index (-0.913) and water use efficiency (-0.614). Early management of Setaria is imperative for successful wheat production otherwise yield losses are beyond economical limits.

SULFENTRAZONE SELECTIVITY AND EFFICIENCY IN CASSAVA CROPS IN SANDY AND CLAYEY SOILS

ABSTRACT Weeds have the potential to dramatically interfere in cassava cultivation, reducing its productive potential; however, there are few studies on the selective herbicides in this crop. Therefore, the objective was to evaluate in this work the selectivity and efficiency of sulfentrazone in cassava crops grown in sandy and clayey soils. Two experiments were carried out: The first one was carried out in sandy soil conditions in the conventional system; and the second one was carried out in clayey soil conditions in the no-tillage system. The experimental design was a randomized block with four replications. The treatments consisted in doses of 250, 500, 750 and 1,000 g ha-1 of sulfentrazone, and weeded and non-weeded controls. Sulfentrazone application in cassava crops has linearly reduced the production of roots in a proportion of 0.0153 and 0.0107 t ha-1 at each increment in grams of the active ingredient, respectively. It was concluded that sulfentrazone was not selective for cassava crops grown both in sandy and in clayey soil; however, it was highly effective in weed control in both soils.

Operatiivisen tehokkuuden kehittäminen ja mittaaminen logistiikkapalveluissa

Tutkimuksen tavoitteena oli selvittää, miten operatiivista tehokkuutta tulee kehittää ja mitata logistiikkapalveluissa. Tutkimuksen empiirinen aineisto koostui haastatteluista, joihin osallistui seitsemän logistiikkapalveluyrityksen edustajaa ja kuusi logistiikkapalveluyrityksen asiakasyritysten edustajaa. Haastatteluiden jälkeen jokaista edustajaa pyydettiin vastaamaan kyselyyn, jonka tarkoituksena oli todentaa haastatteluiden keskeisimpien tulosten paikkansapitävyys. Tutkimuksen perusteella hyötyjä voidaan saavuttaa: 1) hyödyntämällä sopivia kehitystyökaluja järjestelmällisesti, 2) kehittämällä toimipistekohtaisia mittaristoja ja hyödyntämällä niitä eri käyttötarkoituksiin, 3) suunnittelemalla kehitystoimintaa toimipistekohtaisesti, 4) raportoimalla ja dokumentoimalla kehitystoimintaa sekä toimipisteen sisällä että koko organisaation laajuudella sekä 5) kehittämällä prosesseja eri liiketoimintayksiköissä koko organisaation laajuisen kehitystyöryhmän avulla. Lisäksi tutkimuksesta kävi ilmi, minkälaisia kriteereitä asiakkaat arvostavat logistiikkapalveluyrityksen toiminnassa, mihin kehitystoimet tulisi ensisijaisesti kohdistaa sekä minkälaisia mittareita ja mittaamisen viitekehyksiä voidaan hyödyntää operatiivisen tehokkuuden mittaamisessa.

Improving reporting management with relational database management system

Data management consists of collecting, storing, and processing the data into the format which provides value-adding information for decision-making process. The development of data management has enabled of designing increasingly effective database management systems to support business needs. Therefore as well as advanced systems are designed for reporting purposes, also operational systems allow reporting and data analyzing. The used research method in the theory part is qualitative research and the research type in the empirical part is case study. Objective of this paper is to examine database management system requirements from reporting managements and data managements perspectives. In the theory part these requirements are identified and the appropriateness of the relational data model is evaluated. In addition key performance indicators applied to the operational monitoring of production are studied. The study has revealed that the appropriate operational key performance indicators of production takes into account time, quality, flexibility and cost aspects. Especially manufacturing efficiency has been highlighted. In this paper, reporting management is defined as a continuous monitoring of given performance measures. According to the literature review, the data management tool should cover performance, usability, reliability, scalability, and data privacy aspects in order to fulfill reporting managements demands. A framework is created for the system development phase based on requirements, and is used in the empirical part of the thesis where such a system is designed and created for reporting management purposes for a company which operates in the manufacturing industry. Relational data modeling and database architectures are utilized when the system is built for relational database platform.

Belt conveyor energy efficiency analysis and energy model development

An energy model of a belt conveyor was designed. Operation of a belt conveyor was researched. Operational indexes were calculated. Energy optimization process and recommendations were presented.

Concentration of hydrogen peroxide and improving its energy efficiency

Distillation is a unit operation of process industry, which is used to separate a liquid mixture into two or more products and to concentrate liquid mixtures. A drawback of the distillation is its high energy consumption. An increase in energy and raw material prices has led to seeking ways to improve the energy efficiency of distillation. In this Master's Thesis, these ways are studied in connection with the concentration of hydrogen peroxide at the Solvay Voikkaa Plant. The aim of this thesis is to improve the energy efficiency of the concentration of the Voikkaa Plant. The work includes a review of hydrogen peroxide and its manufacturing. In addition, the fundamentals of distillation and its energy efficiency are reviewed. An energy analysis of the concentration unit of Solvay Voikkaa Plant is presented in the process development study part. It consists of the current and past information of energy and utility consumptions, balances, and costs. After that, the potential ways to improve the energy efficiency of the distillation unit at the factory are considered and their feasibility is evaluated technically and economically. Finally, proposals to improve the energy efficiency are suggested. Advanced process control, heat integration and energy efficient equipment are the most potential ways to carry out the energy efficient improvements of the concentration at the Solvay Voikkaa factory. Optimization of the reflux flow and the temperatures of the overhead condensers can offer immediate savings in the energy and utility costs without investments. Replacing the steam ejector system with a vacuum pump would result in savings of tens of thousands of euros per year. The heat pump solutions, such as utilizing a mechanical vapor recompression or thermal vapor recompression, are not feasible due to the high investment costs and long pay back times.

Suorituskykymittariston rakentaminen ja kehittämisen haasteet öljyliiketoiminta-alan logistisessa organisaatiossa

Yrityksen oman toiminnan ja tehokkuuden analysointi mittaamalla sen suoritus-kykyä on yritysjohdolle oiva keino saada parempi tietoisuus resurssikäytöstä ja strategian toteutumisesta. Aiemmat tutkimukset ovat osoittaneet, että perinteinen taloudellisen tiedon seuranta ei itsessään riitä liiketoiminnan kattavassa seuran-nassa. Tutkimuksen tavoitteena oli rakentaa suorituskykymittaristo öljyliiketoiminta-alan logistiseen organisaatioon siten, että mittaristo täyttää organisaation mittaamisen päämäärät mahdollisimman tehokkaasti. Suorituskykymittariston osa-alueet ra-kennettiin kohdeorganisaation kriittisten menestystekijöiden perusteella luotujen näkökulmien avulla. Kohdeorganisaation erityspiirteenä oli toiminta osana toimi-tusketjua, johon kuuluivat öljytuotteiden varastointi ja hallittu logistinen operointi perustuen alan standardeihin. Rakennettu suorituskykymittaristo keskittyi turvalli-suus-, kustannustehokkuus- ja tuotehallintatekijöihin tähtäimenä organisaation strategiset tavoitteet. Tutkimus jakaantui teoria- ja empiriaosuuteen. Teoriaosassa tarkasteltiin suoritus-kyvyn mittaamisen merkitystä, suorituskykymittariston rakentamista ja suoritus-kyvyn mittaamisen keskeisiä haasteita. Empiriaosuudessa kerrottiin kohdeorgani-saation erityispiirteet ja kuvattiin suorituskykymittariston kehittäminen kohdeor-ganisaatiossa. Käytetyn tapaustutkimusmenetelmän avulla nostettiin esiin suori-tuskyvyn mittaamisen haasteita ratkaisuineen. Kohdeorganisaation suorituskyvyn mittaamisesta kerätty tieto päädyttiin koosta-maan kerran kuukaudessa päivitettävälle tuloskortille organisaation controllerin toimesta. Tuloskortin rakentamis- ja kehitystyö toteutettiin kahden vuoden aikana. Sen tärkeimmät mittarit pohjautuivat turvallisuuden, kustannustehokkuuden ja käyttöomaisuuden kriittisiin menestystekijöihin, jotka heijastuivat organisaation strategiasta. Tuloskortista saatiin toimiva työkalu johdon käyttöön. Tutkimuksen jatkokehityskohteiksi jäivät tuloskortin kevyempi kuukausipäivitys ja ennustemit-tareiden kehittäminen strategian seurannan tueksi.

The low efficiency of dendritic cells and macrophages from mice susceptible to Paracoccidioides brasiliensis in inducing a Th1 response

In the present study we evaluated T cell proliferation and Th lymphokine patterns in response to gp43 from Paracoccidioides brasiliensis presented by isolated dendritic cells from susceptible and resistant mice. T cell proliferation assays showed that dendritic cells from susceptible mice were less efficient than those from resistant mice. The pattern of T cell lymphokines stimulated by dendritic cells was always Th1, although the levels of IL-2 and IFN-gamma were lower in T cell cultures from susceptible mice. To determie whether different antigen-presenting cells such as macrophages and dendritic cells stimulated different concentrations of Th1 lymphokines, the production of IFN-gamma and IL-2 was measured. It was observed that dendritic cells were more efficient than macrophages in stimulating lymphoproliferation in resistant mice. However, no significant difference was observed for IFN-gamma or IL-2 production. When cells from susceptible mice were used, macrophages were more efficient in stimulating lymphoproliferation than dendritic cells, but no difference was observed in the production of Th1 cytokine. Taken together, these results suggest the lower efficiency of dendritic cells and macrophages from B10.A mice in stimulating T cells that secrete Th1 lymphokines in vitro, an effect that may be involved in the progression of the disease in vivo.

Plasma and testicular testosterone levels, volume density and number of Leydig cells and spermatogenic efficiency of rabbits

Plasma and tissue testosterone concentrations were determined by radioimmunoassay in 12 eight-month-old sexually mature New Zealand White rabbits and evaluated for possible associations with spermatogenic efficiency as well as with volume density and number of Leydig cells. Testicular tissue was processed histologically and histometry was performed in order to quantify germ cells, Sertoli cells and Leydig cells. Spermatogenic efficiency, reported as the ratios among germ cells (spermatogonia, primary spermatocytes and round spermatids) and by the ratio of germ cells to Sertoli cells, was not associated with testosterone levels. However, Leydig cell parameters such as number of Leydig cells per gram of testis, total number of Leydig cells per testis and percent cell volume of Leydig cell nuclei were correlated significantly with testosterone levels. The statistically significant correlation (r = 0.82, P<0.05) observed between testosterone levels and the number of Leydig cells per gram of testis suggests that, in the rabbit, the latter parameter can serve as a criterion for monitoring testosterone levels in this species under normal conditions.

Urinary iron excretion induced by intravenous infusion of deferoxamine in ß-thalassemia homozygous patients

The purpose of the present study was to identify noninvasive methods to evaluate the severity of iron overload in transfusion-dependent ß-thalassemia and the efficiency of intensive intravenous therapy as an additional tool for the treatment of iron-overloaded patients. Iron overload was evaluated for 26 ß-thalassemia homozygous patients, and 14 of them were submitted to intensive chelation therapy with high doses of intravenous deferoxamine (DF). Patients were classified into six groups of increasing clinical severity and were divided into compliant and non-compliant patients depending on their adherence to chronic chelation treatment. Several methods were used as indicators of iron overload. Total gain of transfusion iron, plasma ferritin, and urinary iron excretion in response to 20 to 60 mg/day subcutaneous DF for 8 to 12 h daily are useful to identify iron overload; however, urinary iron excretion in response to 9 g intravenous DF over 24 h and the increase of urinary iron excretion induced by high doses of the chelator are more reliable to identify different degrees of iron overload because of their correlation with the clinical grades of secondary hemochromatosis and the significant differences observed between the groups of compliant and non-compliant patients. Finally, the use of 3-9 g intravenous DF for 6-12 days led to a urinary iron excretion corresponding to 4.1 to 22.4% of the annual transfusion iron gain. Therefore, continuous intravenous DF at high doses may be an additional treatment for these patients, as a complement to the regular subcutaneous infusion at home, but requires individual planning and close monitoring of adverse reactions.

Framework for Regional Heating Energy Efficiency Assessment

The aim of this project was to develop general framework for systematic assessment of energy efficiency of heating on regional level in Russia. The framework created during this project includes two main instruments, namely: general regional heating energy efficiency assessment model (REEMod) and general regional heating energy efficiency assessment criteria for housing areas (REECrit). Framework pays extreme attention to realization of energy saving, overall cost efficiency and comfortable indoor climate. Life-cycle ideology was applied during creation of the framework. Application of the framework can provide decision-making process with systematically collected and processed information on current state of areas energy efficiency. Such information will help decision makers to evaluate current situation of the whole energy chain, to compare different development scenarios and to identify the most efficient improvement methods, thus supporting realization of regions efficient energy management. Simultaneous pursuit of energy savings, cost efficiency and indoor air quality can contribute to development of sustainable community. Presented instruments should be continuously developed further as an iterative process based on knew experience, development of technology and overall understanding of energy efficiency issues.

Novel virtual environment and real-time simulation based methods for improving life-cycle efficiency of non-road mobile machinery

Virtual environments and real-time simulators (VERS) are becoming more and more important tools in research and development (R&D) process of non-road mobile machinery (NRMM). The virtual prototyping techniques enable faster and more cost-efficient development of machines compared to use of real life prototypes. High energy efficiency has become an important topic in the world of NRMM because of environmental and economic demands. The objective of this thesis is to develop VERS based methods for research and development of NRMM. A process using VERS for assessing effects of human operators on the life-cycle efficiency of NRMM was developed. Human in the loop simulations are ran using an underground mining loader to study the developed process. The simulations were ran in the virtual environment of the Laboratory of Intelligent Machines of Lappeenranta University of Technology. A physically adequate real-time simulation model of NRMM was shown to be reliable and cost effective in testing of hardware components by the means of hardware-in-the-loop (HIL) simulations. A control interface connecting integrated electro-hydraulic energy converter (IEHEC) with virtual simulation model of log crane was developed. IEHEC consists of a hydraulic pump-motor and an integrated electrical permanent magnet synchronous motorgenerator. The results show that state of the art real-time NRMM simulators are capable to solve factors related to energy consumption and productivity of the NRMM. A significant variation between the test drivers is found. The results show that VERS can be used for assessing human effects on the life-cycle efficiency of NRMM. HIL simulation responses compared to that achieved with conventional simulation method demonstrate the advances and drawbacks of various possible interfaces between the simulator and hardware part of the system under study. Novel ideas for arranging the interface are successfully tested and compared with the more traditional one. The proposed process for assessing the effects of operators on the life-cycle efficiency will be applied for wider group of operators in the future. Driving styles of the operators can be analysed statistically from sufficient large result data. The statistical analysis can find the most life-cycle efficient driving style for the specific environment and machinery. The proposed control interface for HIL simulation need to be further studied. The robustness and the adaptation of the interface in different situations must be verified. The future work will also include studying the suitability of the IEHEC for different working machines using the proposed HIL simulation method.

Food packaging indicators and sensors

Various categories of food packaging indicators namely; VTT, Ageless Eye, Mocon, Åbo Akademi and Impak were selected and incorporated into food trays manufactured at LUT packaging laboratory. Each of these food packaging indicators was used to investigate (visually and qualitatively) the transmission of oxygen through the seal, and tray material, as well as to detect microbial activity within the content of the package. Applications of different methods of gas flushing, content variation and introduction of two distinct levels of oxygen scavengers were employed as treatments to evaluate the packaging performance of the food packaging indicators. Ease of handling of each food packaging indicator was also taken into considerations. Findings showed that for packages, which contained chicken product, the amount of oxygen in the package, measured immediately after the sealing operation on the first day gradually decreased to zero percent by the third day of the storage period. The oxygen level remained at this point throughout the duration of storage for the chicken packages. Besides, level of oxygen in the packages without product continued to increase with the storage time, at moderate rate of 0.1% for 100%N2 and 0.3% for 30%CO2/70%N2 empty packages. More carbon dioxide gas was recorded for packages flushed with 30%CO2/70%N2. Results also revealed that visual analysis of one of the color indicators for example Ageless Eye, conformed to the data derived from the luminescence food-packaging indicator. This shows that packaging operation of the packaging line was considerably stable, and efficient with negligible exception. However, it was found that most of the food packaging indicators investigated in this research study exhibited considerable packaging challenges, such as, reaction with the content of the package (Impak); over sensitivity (Åbo Akademi and Impak); ease of handling problem (Åbo Akademi); and ease of activation problem (VTT indicators). In this study, the strengths and limitations of different indicators were analyzed. This study demonstrates the applicability of various indicators in MAP using chicken package application.

An examination of factors influencing ERP key-user satisfaction: A qualitative case study

Several companies are trying to improve their operation efficiency by implementing an enterprise resource planning (ERP) system that makes it possible to control the resources of the company in real time. However, the success of the implementation project is not a foregone conclusion; a significant part of these projects end in a failure, one way or another. Therefore it is important to investigate ERP system implementation more closely in order to increase understanding about factors influencing ERP system success and to improve the probability of a successful ERP implementation project. Consequently, this study was initiated because a manufacturing case company wanted to review the success of their ERP implementation project. To be exact, the case company hoped to gain both information about the success of the project and insight for future implementation improvement. This study investigated ERP success specifically by examining factors that influence ERP key-user satisfaction. User satisfaction is one of the most commonly applied indicators of information system success. The research data was mainly collected by conducting theme interviews. The subjects of the interviews were six key-users of the newly implemented ERP system. The interviewees were closely involved in the implementation project. Furthermore, they act as representative users that utilize the new system in everyday business processes. The collected data was analyzed by thematizing. Both data collection and analysis were guided by a theoretical frame of reference. This frame was based on previous research on the subject. The results of the study aligned with the theoretical framework to large extent. The four principal factors influencing key-user satisfaction were change management, contractor service, key-user’s system knowledge and characteristics of the ERP product itself. One of the most significant contributions of the research is that it confirmed the existence of a connection between change management and ERP key-user satisfaction. Furthermore, it discovered two new sub-factors influencing contractor service related key-user satisfaction. In addition, the research findings indicated that in order to improve the current level of key-user satisfaction, the case company should pay special attention to system functionality improvement and enhancement of the key-users’ knowledge. During similar implementation projects in the future, it would be important to assure the success of change management and contractor service related processes.

Sinkityslinjan pesuosan optimointi

Työn tavoitteena oli sinkityslinjan pesuosan toiminnan optimointi. Teoriakatsauksen ja haastattelututkimusten avulla työssä selvitettiin, mitkä tekijät pesuosalla tai teräsnauhan pesua edeltävissä prosessivaiheissa vaikuttavat pesutehoon alentavasti. Pesuosan ajoparametrien muutoskokeiden avulla määritettiin kunkin pesuparametrin suhteellinen vaikutus pesutulokseen sekä pesuosan optimaaliset ajoparametrit. Vaikutuksia arvioitiin pinnanpuhtauden ja pesuvesien laboratorioanalyysien sekä prosessidatan avulla. Jätevesianalyysien ja prosessidatan avulla arvioitiin lisäksi pesuosan muutosten vaikutusta pesusta syntyviä jätevesiä käsittelevän jätevesilaitoksen toimintaan. Laitetestauksen avulla työssä kartoitettiin, mikä menetelmä pinnanpuhtauden määrittämiseen soveltuu pesuosalle parhaiten. Kustannusarvioinnilla selvitettiin, millä toimin pesuosan toimintavarmuutta on edullisinta ylläpitää. Työn tulosten pohjalta lämpötilalla todettiin olevan pesutuloksen kannalta merkittävin vaikutus. Sen sijaan kemikaaliannostelun merkitys oli vähäinen. Vesien säännöllisen uudistamisen todettiin olevan olennainen pesuvesien ylläpitokeino nykyisessä pesutilanteessa. Se todettiin lisäksi ennakoivana toimenpiteenä kannattavammaksi kuin pesuosan täystyhjäykset ongelmatilanteissa. Teippitestein määritettävälle pinnanpuhtaudelle katsottiin sopivaksi vaihteluväliksi 40–75 %. Työssä todettiin, että pesua edeltävän kylmävalssin valssiöljyn vaihto sekä valssilla tuotetun teräsnauhan pinnanpuhtaus vaikuttavat merkittävästi pesuosan toimintakykyyn ja pesuosan pyörittämisestä aiheutuviin kustannuksiin. Toimenpiteet pesuosalla vaikuttavat lisäksi jätevesilaitoksen käsittelyvaatimuksiin, joskin myös tasaavat sen toimintaa. Työssä ehdotettiin ratkaisukeinoja pesuosan toimintavarmuuden varmistamiseksi jatkossa, sekä tarjottiin työkaluja, joiden avulla tulevissa investointipäätöksissä voidaan ottaa huomioon myös pesuosan toiminnan edellytykset.